Superlikes. Very well expained with step by step procedure. Online purchases, price, and everything. I like your vdos very Especially bcoz i also have a sx4 2008 model
dont forget at the end of this video to tighten that nut to the tie rod end you should have your wrench on the nut and one on the little slots on the tie rod also.
hey there volvosweden! i have a 2007 sx4 2.0 awd 90k .. i have an issue while driving at 65mph 2500 rpms the car shakes shimmys and vibrates, but when i slightly turn the steering wheel to left it goes away.. have u had this happen ?? wheel bearing?
I've had it happen at highway speed when I had to brake. Never found the cause. But found left ball jount loose, worn sway bar bushings and bad two u joints on the proppeler shaft.
will this be the same or similar for a 2002 suzuki grand vitara? Also I watched your video on changing the control arm and I am hoping it will be the same for the grand vitara.
hi!! i have an 2010 sx4. it makes a lil bit of knocking sound and also i could not feel any comfort while on bumpy or rough roads. the stress directly comes on the steering. also cars makes a lot of noise while on bumpy roads. do i need to replace the tie rods and suspensions?
hey there volvosweden I have a 2007 sx4 1.6 102k I have an issue with the car the car make a knocking sound at the bottom front right wheel when im making a slow right turn especially when its uphill do you an idea what causing that tnx.
hi I just bought a 2009 suzuki sx4 and I need to watch your videos and familiarize myself with it. Had an Chevy Aveo and I engineering was more simple than Suzuki. I have an oil leak and I am looking for the oil pressure sender.
You're doing so much for SX4 owners all over the world. Please keep making videos like this!
Superlikes.
Very well expained with step by step procedure.
Online purchases, price, and everything.
I like your vdos very
Especially bcoz i also have a sx4 2008 model
Thank you so much! You just saved me over $200!
Thanks for the video. Fan from Canada. Did this after watching your video and a few others.
dont forget at the end of this video to tighten that nut to the tie rod end you should have your wrench on the nut and one on the little slots on the tie rod also.
-Now let`s make an alignment....
-I don`t think so.
:D made my day Russion style
This video is helping me very much
Congratulation
Do you have a video for rear drive shaft seal replace on rear end of Suzuki SX-4 all wheel drive 2011
thank you for the reply I'm going to check all of these out.
Интересное видео,пригодилось.Спасибо!
Thank you very much for your passion and time.
+Henry Bon Ruiz Thank you.
It is more common that the inner tie rods are loose just an FYI for people looking :)...
парни,епать ковырять сижу вслушиваюсьэв буржуйский язык,а вы раз и по русски заговорили :-) ,делайте ролики на русском ек макарек
Thanks for your help, it was much appreciated
i wish he did a rack and pinion video no one in all of the internet has info on a rack.
That was excellent..Thank You
hey there volvosweden! i have a 2007 sx4 2.0 awd 90k .. i have an issue while driving at 65mph 2500 rpms the car shakes shimmys and vibrates, but when i slightly turn the steering wheel to left it goes away.. have u had this happen ?? wheel bearing?
I've had it happen at highway speed when I had to brake. Never found the cause. But found left ball jount loose, worn sway bar bushings and bad two u joints on the proppeler shaft.
Make ure to check the u joints before it gets worse and then you need a new complete driveshaft.
@@volvosweden Usually it is brake disks...
Thank You so much!!
My car sx4 make Knocking noise(steering )over bumpy road on driverside and also the car vibrate on smooth road at 20km speed .Need ur help
will this be the same or similar for a 2002 suzuki grand vitara? Also I watched your video on changing the control arm and I am hoping it will be the same for the grand vitara.
+Eric S Both will be very similar.
Thanks a lot! Good video!
Отлично!Спасибо!
Do you have video on inner rod change?
Nope
hi!! i have an 2010 sx4. it makes a lil bit of knocking sound and also i could not feel any comfort while on bumpy or rough roads. the stress directly comes on the steering. also cars makes a lot of noise while on bumpy roads. do i need to replace the tie rods and suspensions?
+Tanmay Gaikwad I cant help you from distance. You need to take it to a shop.
nice vedio.thanks
hey there volvosweden I have a 2007 sx4 1.6 102k I have an issue with the car the car make a knocking sound at the bottom front right wheel when im making a slow right turn especially when its uphill do you an idea what causing that tnx.
sorry I dont have an idea
+volvosweden ok thanks volvosweden
А графиткой резьбу смазать?
hi I just bought a 2009 suzuki sx4 and I need to watch your videos and familiarize myself with it. Had an Chevy Aveo and I engineering was more simple than Suzuki. I have an oil leak and I am looking for the oil pressure sender.
+anthony serra Intresting. Let us know what you find.
volvosweden I am saving all Suzuki Sx4 videos. Great explanation and and video quality.
-тоже 19?
-нет.
)))))))))))
Есть такое
Ну наконец то Вы признались что по русски говорите)
Here is my 20 minute fix for the SX4 tie rods ua-cam.com/video/_JxXZOjDyCU/v-deo.html
Хотя бы на русском дублируйте! Только из за этого на вас не подписываюсь!
לא מקצועי והיכן הבטיחות...
משה יש אחי.