How to change Front Suspension Arm on SUZUKI SX4 1 TUTORIAL | AUTODOC
Вставка
- Опубліковано 19 жов 2024
- How to change Front Suspension Arm / Front Wishbone / Front Control Arm on SUZUKI SX4 1 TUTORIAL | AUTODOC
Top brands that produce Suspension Arm: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials....
On our website you will find a wide range of auto parts you are interested in: goo.gl/GL04Eu
Suspension Arm: goo.gl/eaycDG
Suspension Arm for SUZUKI: goo.gl/k92QoS
Suspension Arm for SUZUKI SX4: goo.gl/K0nPa2
SUZUKI Car parts: goo.gl/8zhTw2
Mobile Shop: m.autodoc.co.uk
► How to replace rear wiper blades on SUZUKI SX4 1 - • How to change rear wip...
► How to replace spark plug on SUZUKI SX4 1 - • How to change spark pl...
► How to replace front stabilizer bar bushing on SUZUKI SX4 1 - • How to change Front st...
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
UA-cam: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.c...
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.c...
❱❱ Install the AUTODOC CLUB App - club.onelink.m...
While working on changing mine yesterday, the main frame bolt was coming out VERY hard. I was concerned I was missing something, so went online. This is exactly what I needed to confirm that I was doing it correctly, and finished off the replacement. Thanks for the straight forward clear video.
Thank you for the feedback! We are glad you find our video interesting and informative. Stay tuned. Best regards, Autodoc.
Dude knocked that out in 6 minutes.
So much easier when car is raised as shown. Spray the 3 nuts a day or so beforehand witn penetrating oil. The bushings should be cleaned & bolts lubricated too before re-assembly & tightened under load. Recommend checking tracking afterwards.
⚠ Это пример неправильной установки! Вот как надо (это из оф.мануала) :
Важно: приготовьте запасные болты сайлентблоков. старые скорее всего не пригодны для повторного использования.
1) Установите рычаг подвески, но затяните болты рычага подвески только временно.
(вообще вторым пунктом идёт - установка подшипников, но можно и без этого)
2) Установите колесо и затяните колесные гайки до указанного крутящего момента. Момент затяжки Колесная гайка: 85 Н·м (8,5 кгс-м, 61,5 фунт-фут)
3) Опустите подъемник на ненагруженном автомобиле, затяните болты поперечного рычага с указанным моментом. Момент затяжки Болтов сайлентблоков (оба болта): 95 Н·м (9,5 кгс-м, 69,0 фунт-фут), болт шаровой - 60 Н·м
I'd like to see you do a video on replacing the power steering high pressure line and return line. Went at mine yesterday and I believe I aged 10yrs
If only all repairs were so easy
Warning if you're attempting to do this, buy spare bolts. The inner bushing was seized to the bolt and you will waste a day and get nowhere. Ended up having to put it all back together until I get the spare bolts. My arm was in there for 180k miles. Probably should've been changed earlier. If that bolt chokes your impact or you get out of the threads and it won't slide through like it did for this guy, just cut it off but make sure you have the bolt before hand.
Thank you for sharing your experience, this will be very useful information for us and our viewers.
Best Regards,
Autodoc team
Hi. Do you know what the specs of the bolts are and where I can get them? I plan on replacing my nsf arm.
@@ean8243 I need to know the specs too. Mine broke off completely and I need a replacement 1.
Wow, amazing work, very proof...Please, do you have a video with replacement of Engine Cross Member from SX4?
Thank you for your feedback! Thank you for the interest in our channel. Unfortunately,we don't have such video. Best regards, Autodoc.
Great job!!!
What is the recommend torque if I don't have the impact wrench?
From manual:
Tightening torque of Suspension control arm bolt: 95 N·m (9.5 kgf-m, 69.0 lb-ft)
Suspension arm ball joint bolt - 60 N·m (6.0 kgf-m, 43.5 lb-ft)
-Front suspension frame mounting bolt(non-precoated) 108.5 lb-ft
-Front suspension frame mounting bolt(pre-coated bolt with friction stabilizer) 69 lb-ft
-Ball joint nut 43.5lb-ft
Do I need to tighten all bolts when the car is placed on the ground or can I torque them up with the car in the air. Thanks for the tutorial, it was very helpful.
Thank you for your feedback ! We are happy that you like our overview video. You are absolutely right - a control tightening of suspension fixings is to be carried out , when a car is on its wheel under the load of its own weight. Best regards, Autodoc.
Videos are great help though
Near brand new car and no rust and ramp!
Should the components be lubricated a little when replaced ?
Yes, it is recommended to lubricate the components when replacing them.
Thank you for your valuable clarification, this will be very useful information for our viewers.
AUTODOC
I have changed mine by carefully watching this video. At the beggining It was a nightmare. After I saw the tap
in the control arm with the hummer from below, was the key to fit inside. It is true that the company manual tears down
the whole base of suspension. I think they are psycho. Your mechanic in autodoc is a genius. I have seen this video more than 30 times.
Thanks for your positive comment! Stay with us!
Meanwhile other mechanics are tearing down the entire suspension to remove the suspension arm. Lol you only need to remove the three bolts and separate the ball joint from the knuckle as professionally demonstrated in this video.
Thank you for your feedback! We are very happy that our videos appeared to be useful for you. However, the replacement complicacy and sequence may differ depending on car design features and car part status. Best regards, Autodoc.
You must have the weight of the car on the wheel before you tightened up the inner two bolts,really!
Thank you for the valuable clarification, for our viewers it will be very useful information.
AUTODOC
Нельзя затягивать болты сайлентблоков, если машина не стоит под своим весом, т.е. нужно затянуть их не до конца, установить колесо, отпустить подъёмник и только после этого дотягивать до конца. Вы же тут всех дезинформируете!
Instead of the stupid music, why not get a narrotor to explain what is being done.🤔🤨