DJI Goggles 2 backwards compatibility is here. At what cost?
Вставка
- Опубліковано 6 сер 2024
- Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
---
00:00:00 - Did we get what we were promised? Sort of.
00:00:45 - Not everything is cross-compatible
00:03:10 - The updated Air Unit cannot bid to V2 goggles
00:05:06 - The updated Air Unit cannot bind to V1 (black) controller
00:05:40 - The updated Vista acts almost exactly like an O3 air unit
• DJI Goggles 2 Backward... - Mads Tech's video about this
00:07:07 - Does ham_cfg work? What about rooting?
• Finally! Full Betaflig... - What is rooting and how to root.
00:08:29 - Air Unit on board DVR doesn't work
00:09:01 - How to upgrade
00:11:10 - How to switch goggle mode to bind to different air units
00:12:00 - Other features that we are losing
00:13:20 - Betaflight OSD is now supported on Goggles 2
00:14:15 - Air Unit doesn't go to full power without an FC connected?
00:14:50 - Is this good or not? It depends...
Should I flash all my Vistas and start using the Goggles 2 as my daily driver? Or stick with the V2 and WTFOS?
v2 w/ good antennas for life!
If there uncomfortable to wear what's the point.
I’m concerned about having to use your phone to arm in the future. After all it’s DJI. I think the Avata is getting this requirement. And the Avata is a big O3 unit. So don’t update all your air units. ✌️😎
Flash em thats what im doing goodbye v2
How are people liking the form factor on the googles 2? I'm used to fatshark and way back when eachine box googles. For some reason I really like the size and feel of the DJI v2 over fatsharks. Maybe a little large but compared to a taranis x9-d throwing these in a backpack is nothing.
I'm still rocking V1 goggles and loving them 😉
Holy shit I'm not updating shit till I watch this again sober tomorrow
🤣
Many thanks. You answered all my questions and more. And some great tips as usual.
@16:25 😂
only flew 3 packs in freezing cold but goggles 2 and vista feels really good! Also running full crossfire locked @150hz. O3 looks crazy good from vids I've been seeing. Thanks for the summary 👊
We should start calling the "Vistas" and the others of that generation "02s". Its an accurate description, and it designates that it is in fact an older tech.
DJI tech is good but its so complicated when you have a lot of different drone (1s whoop,LR 7inch, 5inch, 4inch LR, 1s toothpick) and more if your into fixed wing and rc boats. for me at this time if WALKSNAIL system i simplier and more suited for this hobby paired with ELRS.
I see now; the goggles 2 and the new air unit are exclusive to each other out of the box. Thank you Mr. Bardwell, I have learned something today.
Exclusive to each other *and* the v2 generation of dji goggles (including the vtx).
Ha! Yeah, FPV is more fun today than ever before..
I love the cake analogy haha
Hi Josh. Just finished watching your video, great info, thank you! Newbie drone owner here. I own the original Mavic Air 1, I have very little flight time on it since purchase, because using my phone as a screen is difficult, so I fly like a granny, lol. Will this goggle be compatible with my unit? I'm still trying to figure out all the variations, and models of the DJI lineup, so I'm confused. I watch tons of you videos, so you are my go to guru for all things drone. Thanks for all of your videos.
I'm satisfied with my 'old' DJI Goggles V2 and Caddx Vista's. WTF OS provides the one missing feature I wanted. I won't be buying any more DJI stuff. DJI is now dead to me. I don't want fewer and fewer features at higher cost with half-assed backwards compatibility. The fact that new DJI firmware doesn't support INAV / Ardupilot is a dealbreaker for me.
Question.do i need to have betaflight 4.3? Or does wtf os canvass mode works on 4.2?
...... when I first heard about this "compatibility" update I thought it was dumb. Yep, still do and I'm not even affected by it.
i just bought a vista and use v1 goggles. I would have probably updated them to whatever was newest upon receiving it this week only to be super confused when they don't bind.
Thanks for this video!
In your opinion, is it worth upgrading the v2 goggles to these new Googles 2?? I own the Avata, Dji fpv drone, quads with Vistas and OG air units.
More testing! When the update make the V1 Vistas akt lit the O3 AU will the penetration also improve? That would be nice. Sadly i can not use my V1 Goggles together with Goggles 2.... DJI has again managed to create a wedge between the FPV pilots. Two years ago between DJI and everything else (analogue) and today even between their own products V1 and O3. So as long as you fly alone everything is fine, but isn't the hobby just about having fun together?
Hey Joshua, I actually tried updating my goggles v2 on new software and didn’t work. I tried on the FPV series assistant and that worked. I also have the issue with running macOS, goggles v2 struggle to update but I made a video on that with the solution. I have updated to the latest firmware successfully with that method with my v2 Goggles.
Does it matter what firmware you have on the controller 2? I updated my goggles and og air unit,binded the goggles and controller,I get video but the controller is not working,in betaflight nothing moves when I move the sticks/buttons.
Im sticking with my v1 goggles on my air units and have goggles 2 only for Avata. If u switch modes back and forth u need to bind them all again. Dont know if u said that or dont
I upgraded the DJI V1 controller to RadioMaster metal Gimbals and love them. The good gimbals won't fit in the DJI Controller 2. And, I don't want the extra weight of separate receivers. I guess I"m stuck with V1.
I’m just getting into this. If I have goggles v2, controller 2. Am I better off getting quad with o3 unit?
good update for me as I only have analog rn B)
I'm just learning FPV with my dji Avata and want to get into th fpv hobby proper, which new rtf fpv quad should I get to bind with controller 2 & goggles 2?
I have 2 V2 goggles, like 20 something Vistas and was going to get the goggles 2 and a few 03 airs when they got backwards compatibility hoping they would all work together seamlessly but now I'm thinking they might be better as separate systems.
It's simple. We can only wear one set of goggles when we fly so more than one goggle is redundant and unneeded.
IMO, I'd sell you V2's to pay for your Goggles 2, or some more 03 air units! Easy!
Then you can apply this fantastic update and have the very best digital FPV system the hobby has ever seen! Betaflight OSD on your Vistas too, and they become 03 lites! Perfect!!! :)
Is this me? Haha, I could say the same exact thing. I don't know what to do. I'm attached to everything, lol
you just made of money?
@@whitetiana3022 He's got a money tree growing in his backyard! 🤪
Yep I'm in same boat currently 20plus vista's. 3x v1 goggles and 1x transmitter1 . Have the avata with g2 . And a few 03 on the way but got no choice but to keep the old system separated from the new system. Mainly so I can have spectators options . And prefer the v1 trans for pincher . Although not much stick time on the trans2 yet. Bardwell has anyone come up with a bec cable for the g2 yet .. hate that little battery pack . 4s liion pack in the pocket lasts so much longer
I really hope they release an update for the V2 goggles to allow binding to that new firmware. I would consider buying the goggles 2 if I knew I could use my old v2s as spectators for friends
yes. absolutely. i don't want to buy the goggles 2 because i like it to wear my glasses under my v2 goggles. so using the old Vistas, airunits and the new o3 without changing the fw (and loose binding) would be the thing for me. Dji....please do it!!
Never. Dji nailed!
My V2 goggles already update to new version that can bind with avata and O3
@@user-ns7mo2rf3u and can't bind old units/vistas together...you must chose
@@ali3n24 you can bind it now. firmware upgrated.
good video but what about flying wing setup with no FC since we do not have the temp control option? thanks
@JOSHUABARDWELL will the new firmware allow v2 goggles users to use the Grey fpv controller with the Vista? Or does it still remain the same with using the black Mode 2. It would be nice if Vista and the new 03 with the v2 goggles being in sync to use with Grey fpv remote. otherwise you have to carry two controllers.
I have the original Mavic Air. Will these goggles work with it? Or do you recommend some that will work?
If the power in a updated vista can not be change, what's the output power? If the the drone is disarm the output power its 25mw? Thanks
Will there still be the bind bug while switching between O3, DJI FPV and Vista? If you say the vistas behave like the O3, I still bind them AirUnits?
So if you upgrade to the new firmware the black Tx controller will not work? If not which controller would you use?
people it screws over, people who bought the dji fpv drone combo, i have the v2 goggles and the v2 gray remote and want to bind those 2 products to vista, air units and 03 but i cant without getting goggles 2. I'm annoyed that dji did not consider the v2 and controller 2 to be in the same tech tree even tho they literally come in the dji fpv combo
Oh they considered it. They just don’t care because DJI likes to screw people over ALL the time.
How is the performance difference on the new googles vs V2 with the Vista or original airunit.
So... I have 3 quads, 3 Vistas, 1 Googles v2 with antenna upgrades, 1200mW hack and so on. I will not change to O3 units because I need to change all the frames and it's not worth it because I'm always use a GoPro Bones (hobbyist cinematic footage and sometimes a little of freestyle) and I'm happy with them, but I'm questioning about this update. If I buy Googles 2 and flash all my Vista units, I will gain more range or penetration? Or will be basically the same that I have now? I mean... the firmware only gave us compatibility, or "unlock" certain RF ability to work more as an O3 unit with a little gain in range and penetration?
If we will gain range and penetration only buying Googles 2 using our Vista units, maybe it's worth it. Otherwise, I will keep with all my hardware, because works flawless.
You're a great man Joshua, the best UA-camr and teacher BY FAR. We always learn something with you. Keep the good work!!
Thank you! 🥰 Love your work! :D
You are not alone. I grabbed a pair of the G2 goggles with the Avata and was hoping for eventual backwards compatibility. And now they are! Except I wasn't ready to abandon my V2 goggles. I have a son who also flies with me and was going to finally start updating his drones with DJI vistas as well as have him be able to fly my vista drones with his own goggles so we can have a fun digital drone day! NOT! Now, I realize we will have to split our fleet where he has his drones, and I have mine but, thats not very fun. The fact that we would have to maintain 2 different firmwares for our stable of drones kind of blows. Not to mention, you didn't talk about spectating. The majority of the group I fly with are still on V2 goggles and will probably stick to that. So now they cannot spectate me anymore if Im on the latest firmware with no V2 support correct? Yea, its not just YT influencers. Plenty of us were hoping to expand our options with this update, it seems, in DJI ridiculousness again, they have killed off that possibility. Profit-wise it makes sense but once again makes no sense to the actual pilots that supports them. Just my 2 cents. I think I have been flying as long as you have Joshua so Im happy to have a DJI system like this after years of dealing with analog but seriously, DJI always seems to do something to screw us in the end. Oh well. I have some choices to make. Maybe I sell off the G2s and buy a used pair of V2s and call it a day. But I really love the form factor of the G2s. Everyone talks about the terrible fit, but I guess my face is shaped just right because the G2s fit my face fine.
Makes better sense to just keep using the v1 remote, remote is cheaper than buying a new googles 2 goggles
I did this update on one of my Vistas but had to roll it back. I lost video twice and had to disarm, not sure why. It was easy to roll back and flew fine what I was back on the V2 goggles.
What a freaking mess, DJI! 😬
Thanks, Joshua!!!
Stay safe there with your family! 🖖😊
Do you even own the DJI goggles
@@BBSlats Of course not. I'm not that stupid.
Then what do you care
@@BBSlats I care about the freaking hobby. If you don't, that's your problem. Not mine.
@@MCsCreations false rants is all your doing here.
Bought DJI FPV. Wondering why the update allows the controller 2 to bind but doesn't allow the goggles to connect anymore. Would have been perfect if the controller 2 would work along with the Goggles V2.
If this new firmware makes vista / air unit more like O3, why should v2 not be able to connect, as the V2 are compatible with the O3 Air unit?
Seems like a deliberate, and if so malicious choice by Dji to forcebly remove back compatibility with V2?
If i have goggles 2 & o3 on my quad, are my friends (who have v2 goggles & vistas) able to view my o3 in audience mode?
Thank dear..one more time!! ..any news If googles 2 are compatibles with dji fpv drone?
No they aren't.
So I'm still screwed with my old DJI box type googles except for with my Mavic, right?
I have v1 goggles and use eLRS so it’s over $1000 Australian to get the Goggles 2, so don’t see any reason to upgrade currently.
hi Joshua nice video.Why you have g2 and v2 goggles?The most people of fpv have one pair of goggles so dji with the firmwares you can choose what you want to use.i dont understand what is the problem.Also the avata drone it is not a custom drone its like a mavic.If people not want the restructions and the laws they can make a diy fpv drone.I dont understand the problem.
Will/do the Goggles 2 link to the FPV Live app on the first generation smart controller?
I've been using the black FPV v1 controller and really like it but after they stopped selling it I realized what must be happening and bought TX16S Mark 2 to replace it. Still in process of upgrading all my drones to ELRS and it is an upgrade for sure but I'm still a bit annoyed that DJI effectively turned that controller to scrap with this decision. I had been planning on selling it but who would buy it at this point? Had I known this I would have been faster with ELRS upgrade but as it is the black controller has been great so didn't see a reason. Stupid me.
Because of all of this I'm not sure if I'm staying with DJI in the long run. I don't want to end up into a situation where I buy something from them and year later it is obsolete and not supported anymore.
Has anyone found disappointing that you lose your drone linking when you switch between V2 Goggles and Goggles 2 and viceversa. Oh well, DJI did exceptionally good with this cross compatibility debunking ALL those influencers that implied DJI was going to obsolete Vistas and Air Units, and gave us even full “Canvas” or whatever the new name is.
Thank you Josh again, you’re hands down the Jedi of all related to the FPV world.
I absolutely stand by my concern that the vista's days were numbered. I think it would have been irresponsible not to talk about that possibility when somebody said, should I buy into the v2 system today? I'm glad it didn't work out that way.
If you're in a cage with a tiger, it's not wrong to worry that the tiger might eat you, even if it ends up not.
So if I don't do the update, I can use my V2 Goggles with the new air unit and obvusulsy the original air unit or the Vista unit
Is the same video series good to watch with the building the xilo v2 kit you made?
and..I'm sitting here thinking what the hell googles is better to buy now..V2 or googles 2? I don't want blurry corners like on my old HD2.. any advice?
I’m guessing maybe they don’t have enough flash space to embed both protocol / signal processing in the vistas ?
Has anything changed for the better in the last 5 month's?
Surprise ! DJI pulled a DJI ! Go figure...
Can I also use the DJI Integra Goggles with an old DJI Air Unit?
Sounds like the cheaper V2 Goggles are the best halfway solution
Hi JB! My house got burglarized, they took everything (that includes all my fpv gear) my awesome friend gave me his Stingy V2 with a Caddx Vista rocking a Nebula Pro and my best friend is going to give me a new set of goggles. What should I pick? the Goggles 2 or the FPV V2?
That's a tough one!!!!! I think if I was more concerned about latency I'd take the V2, but if you want great OLED screens, take the G2.
I’d love to know the performance difference of 1200mw with the new RF system
My Vista doesn't output anything through the SBUS port when in Goggles 2 mode while using the V2 transmitter. It doesnt matter whether I have DJI Fast baud or standard mode set. The transmitter is bound, and is showing up on the OSD as it has link, but BF configurator shows no channels moving when I move the sticks.
My brother uses the rc2 and I HD to use the fast sbus cli command in BF to get it to work
@DJI please add manual power limits and 8 Raceband channels to all of the Air units, we need it to fly with other pilots using other video transmission systems. thank you.
I am using Vista with goggles 2 and controller 2…. But, get no signal in Betaflight (skystars F722)… can anyone explain how to set Betaflight? Thanks Rüdiger
I still have the DJI FPV drone, why not compatible with the goggles 2 🤷♂️
Something something RID probably. The fpv drone isn’t RID compliant according to the faa while the avata is. Food for thought… I’m sticking with my v2s, avata, potato drone, and 03 air units and never updating any DJI firmware again. Nor will I ever buy a half baked DJI product hoping for future upgrades to fix current issues. I don’t have any vistas so the rest doesn’t matter right?
I upgraded 19 vista units, 6 Air Units and one 03 unit to the current firmware (as of 11/DEC22)...JUST-to-find that my V2 goggles would not bind to anything other than the 03 unit( changing modes of course). Going back one firmware version on the vistas and air units, they all came back into V2 goggles as normal. SO...I'm afraid to change back into DJI 03 mode, thinking that i will loose ALL the binds to these vistas and air units again. Am I not understanding something? I dont mind having to change modes for each type on vtx, since i have to do it when using the DJI FPV Drone, but it would be a pain in the ass if i had to rebind every time i switch. Also, if upgrading everything to current firmware will i loose the option for 8 channels and power levels with the vistas and air units?
In my testing, the lose-bind bug is now fixed. Have you checked it?
If you wanna record a video with an air unit using the DJI goggles 2, you have to start the recording before taking off, and the video for some reason looks in slow motion and has no OSD.
I see V2 firmware V01.06.0000 is now the latest. Did they fix the V2 to now work with Vista, Air Units, etc after they are updated ?
I am avoiding updating my vistas and Air units because I want to use my V2 goggles for the DJI FPV, all vistas, air units, and O3 air units. And only use Goggles 2 for Avata.
When I plugged in my Vista, Assistant started to force an update, and started the download without giving a choice of versions. I unplugged immediately, all all is good. vista still connects to V2s.
Did you find out, does it bind google v2+ dji remote controller 2 with newer update?
What about the OG dji fpv drone, does it work with the goggles 2? If I want to loose the v2 goggles for the vistas and want to use goggles 2 for everything can/will it be able to run the potato drone?
The OG FPV drone is not currently compatible with the goggles 2.
Dear Joshua, I have the DJI Goggles V2 and DJI FPV air units. Everything fine. Now I have ordered a DJI O3. Which kind of firmware do You recommend if I would use both air units with the V2 goggles & I like to go long range.? Thanks Elmar
If using the v2 goggles only, do not upgrade the Vista vTX to firmware 01.01.
Wish I would have seen this video earlier. I just got V2 goggles, and updated everything. I could not for the life of me bind to my vista.....I had no idea why until I downgraded it.
Still seems kinda buggy. Updated the Goggles 2 and old air unit but still getting connection failed after updating the firmwares
Honestly it could’ve been much worse. I need to know if the penetration on the vista is just as good in 03 mode so I can pull the trigger on the new goggles.
I have the V2 goggles and the biggest gripe is getting jittery video recordings while using rocksteady, even though the video live feed is smooth, also did not recognise my TBS crossfire receiver no matter what uart it was on after putting the code in the cli to use the osd, got round this by switching crossfire to sbus. Having to rebind when switching back to use my old vistas is a pain too. Not perfect by a long way
Video live feed does not show stabilization. If you're getting jitters, soft mount your camera.
@@JoshuaBardwell Thanks for the reply, i know the live feed does not use stabilization, that would not be a good idea, im just saying no jitters on the live feed or the dvr recording just the recording on the 03 with rocksteady stabilization turned on, like a bouncy sort of effect which does not look like vibration you may expect if you had vibration issues.
Hi thanks for the very informing video
Do you know if the goggles 2 is compatible with DJI FPV?
It is not :-(
@@JoshuaBardwell ok thanks for your time! You’ve help me confirm what my order list from DJI. Just to confirm Goggle v2 is compatible with avata but Google 2 is not compatible with DJI FPV?
I was looking to get the googles 2 and keep my googles v2 for people to use for "ride along's". guess not
Thank you JB for the video. Hope i can get some help.
I think i might have a problem like so many people, i have a drone with the vista air unit, v2 goggles and black v1 dji controller wich is flying perfectly, and i got a new drone with the O3 air unit with a RadioMaster TX16S controller with ERLS, but here’s my doubt; I didn’t buy the goggles 2, i’m planning on staying with the v2 goggles as long as i can, ¿Will the updates on the v2 goggles or the vista unbind my previous drone from the black controller?
No. You're fine. You can continue to use the Vista and the O3 with the v2 goggles and your black controller.
Don't update the Vista to 01.01. If you already did, roll it back.
The O3 cannot work with the black controller under any circumstances.
Man That was a fast answer! You are amazing dude! Thank you so much for the great detail in everyone of your videos, i watched the complete Betaflight tutorial 😅
lol 😂 why am i not surprised of what will happen
what firmware is it I just got the dji goggles 2
Good job with the table overview. And a bit of a bummer how they did it. Probably would've been okay if they let the V2 goggles be compatible. Wouldn't mind ditching the black controller but not the v2 goggles. And the goggles 2 should support the fpv drone. So that's still holding me back from getting the Goggles 2, the Avata and the O3.
I have the FPV and tested the Avata because the new goggles seemed nice with the better display/lighter build. The range sucks compared to Goggles v2 so that was a dealbreaker for me
@@abu_six19 Did you use the ham file hack?
@@seb-depp no, what’s that?
@@abu_six19 Try this: ua-cam.com/video/FXbK32XJgvo/v-deo.html
@@seb-depp wow! I should’ve researched before returning the Avata 🤦🏽♂️ you think there’s a significant improvement if I do this on my goggles v2?
I have goggles v2 +vista and o3, everytime is switch to either one of them i loose binding connection, and have to rebind all the time. Maybe im doing something wrong? Also how about o3 waterproofing? Should i coat it? Thank you!
That's a known bug that is fixed in this firmware but only with the o3.
@@JoshuaBardwell thanks!
I mean it's a different protocol entirely, I wouldn't really expect them to support everything at once, they're not running Apple M1 chips on these things after all 🤷🏻♂️
Great analysis. I love you. First
I can’t get my gray DJI remote to work with my evoke and goggles 2. It binds then nothing
I just flew a Vista on the new goggles today. I was sure I had seen the camera orientation on the panel that opens when you slide up on the touch pad. I’m not much of a content creator but not happy that my v1 goggles do not work without flashing back the firmware. This is better than DJI doing nothing but I was hoping I would be able to use the old goggles for audience mode ride alongs. I’m hoping that there will be future updates to the older goggles but it probably will not happen. This B-day cake was gluten free.
U can flip the image like old form
Just use your smartphone with the Digiview app! Works great and all you need is a decent length USB cable! Plus, how often do you need to use audience mode? I hardly ever have, and when I have had someone who wants to watch me fly, I simply plug in my phone, and they are excited and happy as a lark!
I suggest you sell your old gear, and use that money to buy new 03 air units...or whatever! People are dying to grab used gear!
We can only wear one set of goggles when we fly, so I for one see no reason to own others, especially when you own the VERY BEST FPV HAS EVER SEEN! Be happy! I see not one thing to complain about!
We can only fly with one set of goggles on our head and one controller in our hands.
Yeah but on a phone your ride-along is looking at a phone in their hands. Put goggles on them and they’re doing FPV. You might as well ask, “Why aren’t you flying with your phone screen?”
@@KOrnhOliO1 It’s not the same as having them in the goggles too. Will most likely try to sell the goggles and get another pair of O3 for ride along. Also have another family member that flys sometimes.
@@TechnicallyTom The Goggles 2 can broadcast a wifi signal to any smartphone for people to spectate. But, really, so many upgrades and extra features and compatibility, and spectating is what you really, truly, want to bitch and moan about! FUCK! 😵💫Think it through, Bro...👍
I think i’ll upgrade my Vistas for use with goggles 2 and leave my air units on the old one for use with v2s. That way i can feel like i’m still using my old gogs
Huh? Why would you even want to strap on those heavy V2 goggles when you own the Goggles 2 with all their advantages, including OLED screens?
Makes no sense. I'd upgrade everything to the new firmware and enjoy the benefits of Vistas being upgraded to 03 air unit lites! With full Beataflight OSD, as we always wanted! if you already own GOggles 2, Dude, upgrade and enjoy the VERY BEST FPV has ever offered us - for ALL of your gear! You've got the dream system!
Sell your V2 goggles used, and use that money to buy a couple more 03 air units!
Why would you want to keep them, and even more, why would you use them when you have the very best?!
Hi,
I didn't understand very well but, please let me know if the new Dji Googles 2 are compatible with the Fpv system that is mounted on (OMPHobby ZMO Vtol with Caddx Air Unit and Dji Controller V1).
Thanks in advance for your reply.
Goggles are compatible with caddx air unit but not v1 controller. You must update caddx air unit to firmware 01.01.0000.
@@JoshuaBardwell
Hi,
if I understand correctly after the update they will be compatible with each other (Dji Controller V1 (black color) Caddx air unit and Dji Goggles 2).
Quite right?
@@JoshuaBardwell Hello
after watching your video about the update i'm a bit confused:
You in a previous post told me that after the update they are also compatible with the Controller V1 but from the graph you show in the video they are not compatible.
What's right? what you wrote me in the post or that graph in the video?
DJI is the "monkey's paw" of drone companies. Ask them for something and you'll get it...just not what you were expecting.
Can we use the Dji Goggles 2 with drones from other brands ? I'm a newbie, thank u
You can use the Goggles 2 with any drone that has a DJI air unit in it. There are lots of manufacturers of FPV drones with DJI air units. But you can't use it with a drone from a vendor like Skydio etc because they don't have their own proprietary video systems.
C8 on excel chart is any news to be YES in future? Is any upgrade coming about unlock the compatibility to yes on C8? After the firmware to be compatible V2 GOGGLES with Grey V2 Controller?
No I don't think this matrix will change.
Did you notice the update for avata that says Remote ID?
Dam I would love the V2 googles with the smaller controller.
Man I like the V2 big screen like being at the movies they need 2 models a box oled version for cruising and people who prefer box , push the goggles 2 firmware towards racing faster flying with the smaller screens I really get annoyed with the small round lens like you can never get edges perfect for racing you want just the center clear
With DJI there's always a catch. Still waiting for hdzero.
Hello everyone, do you think it's still worth buying the V1s? for use with homebuilt quads, what modules are they compatible with?
They are compatible with Vista-generation vTX but not the O3. Basically all the DJI FPV vTX and cameras except the O3.
@@JoshuaBardwell Thanks for the reply.
I'm watching and watching over, reading comments and i can't get.. Can I use DJI FPV GV2 with latest SW (like 1.04) with Caddx vista with old firmware ? I know that the new firmware on both can't bind together. I want to use this googles with FPV drobne, Avata, o3 and 'old' caddx vista freestyle drones.
To use the Vista with the G2 goggle, the Vista must be on firmware 01.01.0000 or newer, and the G2 must be on firmware 01.03.0000 or newer.
I think the new update should be great, but is the lack of the power hack and upgradeable antennas worth the upgrade? That is my issue going forward.
Upgraded antennas will be coming...bet on it. Plus, the Goggles 2 give amazing clarity and range. Power hack is probably unneeded, and I'll bet it can still be done, in time.
From my non scientific user test I have better range and penetration with g2s than v2s with directional
With the new firmware, the goggles 2 are compatible with the dji fpv?
No that wasn't added.
Now I am scratching my my head wondering if the "full power mode" you mentioned in a wing without a flight controller will work with the TBRC HD OSD board. The board emulates a FC in that is sends a arming command via MSP to the VTX. It should work technically speaking but I currently only have V2 Googles. I don't own Goggles 2 and I don't have a 03 airunit yet to test. Anyone who has a new system that flies fixed wing hit me up so I can get a board to you for some R&D and beta testing. We do have a new V2 HD OSD in development that should be out in the new year which adds current sensors and a BEC on the board. Things changing so fast I can't keep up LOL.
Wow Dji is one smart company. They purposely do that to force folks to upgrade and buy their new product in a since. I knew there would be a catch to all this compatibilities
Yeah, this is a huge problem for those who own all those goggles and controllers. 1st world problems!
Why would you own all those goggles? How can you want to strap on those big V2 goggles when you own the Goggles 2 with the OLED screens and half the size and 1/3 the weight?
Sell your old gear. Use the money to buy new 03 air units...or BEER or GANJA! lol
There is no problem.
Seriously! Why would you even want to bind both goggles????
@@redhotkai if you use this equipment to work and need a fast switch between them in case of a failure of any kind, its kind of a big deal…
@@mafracao sell your v2s, buy an extra set of the g2 and done. I mean, we're talking 0,1% of users where this is an actual problem. The rest just want to find problems.
@@KnizzleHizzle OH FOR SURE, I'm gonna buy goggles 2 for 850euros in europe just cause right? It's just a pocket change for people in 3rd world countries around all the europe...
Ok Jb thanks. All good for me. Has anyone tried to use the V 1 or V 2 goggles in spectator mode or what ever it’s called and tune it in to a 03 air unit to watch?
The v1 don't work with the O3 at all. The O3 generation of firmware doesn't use audience mode like the Vista generation. Rather, the bound goggles are told to rebroadcast the signal and other goggles can tune in. This works with v2 and goggles 2 as long as they are in O3 mode.
@@JoshuaBardwell That actually sounds pretty cool if I understand your response to M M. Bardwell are you saying that a primare user is bound to one air unit, the goggles 2 broadcasts a video feed to nearby other goggles 2 users, and that video feed looks pretty much as good as what the primary user can see (not blocky anymore at long range like before)? What’s the latency? I haven’t heard much about the audience capabilities. Would love to see a vid on this feature😀
I do not own a drone. I am researching my first drone, a lot of what's being said here is very confusing for me as a complete noob.
I have one question that will help me with my initial FPV drone....
will the Goggle's 2 (the new ones) work with either the avatar and the older dji FPV drone?
Yes the Avatar. No the FPV drone.