@7McQueezY7 it also depends on the control system. If it is a hydraulic pilot control, you get instantaneous positive feedback from the controls. If the control system is electrical and uses switches and solenoid valves, not so much. Pilot control systems are far superior for control and "feel", but are very complex and expensive. Both to manufacture and maintain. These trucks likely have the electrical control system, not pilot.
@7McQueezY7 right you are. But there is a huge difference between forestry machines and cranes, compared to garbage trucks. They dgaf about that much finesse when moving garbage cans. Could these garbage trucks be made to handle like other more precision equipment? Oh, absolutely. Are the manufacturers going to build them that way? Only if the customer is going to be willing for the increased price tag. They cheap out on a LOT of stuff on garbage truck bodies and control systems, and use that money elsewhere, like in AR500 plate steel for the hoppers, sweepers, moving wall, and lining the inside of the body, if you're lucky. Other than that, I have yet to see one that had any finesse whatsoever. But again, comparing garbage trucks to cranes is like comparing dog turds to diamonds. Yes, the electronic controls have come a long way. But, to make them work like that there is a LOT of monitoring, computers, extra wiring, and all kinds of stuff. I would put money on it that if those side loader trucks had a bit more finesse on the movements, they would be MUCH easier to use without making a huge mess. But those kinds of features cut into the bottom line, so there goes that, right out the window.
@7McQueezY7 and to add, rather than edit, the simpler they are, the easier they are to fix and keep working. Electronic proportional control of hydraulic systems like that would be almost as far away from simple as you can get.
That robotic arm grabbing with such force literally squeezing the life out of them trashbins, made me die from laughter and pity at the same time lmao 😂😂😂
I worked on garbage trucks for a bit. The gentleman in the Mega truck has my respect. The whole purpose of the side loaded is to cut down on wear & tear on the body.
The side loaders in the 80's and 90's were just as hard as the rear loaders...both syles the garbage man would have to physically place the trash into the trucks.
The Mega Disposal guy had me cracking up. Literally so much misfortune. Cussing the trash at 2:42 😂 After the first few clips of him, I laughed harder at each one. The one where the entire can goes in the truck had me on the floor though.
I drive a side loader garbage truck in Brisbane, Australia, and my god... the arms on these American ones have soooooooo much flex in them. Our lifters are in-line, not offset. It makes it a much smoother process for picking up bins, but also allows us to cleanly pick up bins that are almost touching each other. I can't imagine how painful these must be to operate.
Where I live in TX, the trash company provides us with specially designed bins for the truck (kind of like what that guy had at 4:55 except ours are huge and alot tougher). It's big enough that you only need the one, so crowding isn't an issue, and their grabber is this hook that jabs under this two foot wide slot in the front of the bin. Idk if that's a good system, but they're really fast with it...like 5 seconds per stop with no exceptions that I've ever noticed. Where I live, things like public infrastructure and services have always been pretty up to date though, compared to most of the U.S.
Respect to all the hard working refuse engineers out there. Thanks for all you guys do for us. God bless all of you. Stay safe! The last few clips taught me to not place the bins so close together, nor to let the bins overflow too much, and that non-government issued bins are not recommended for use. I'll refrain from doing those things from now on. I live in a house with lots of roommates, so I'll inform them as well. The easier and more pleasant we can make your day is important.
The whole video taught me that sometimes the old ways can't be improved on. These machines and their operators do two things. They turn garbage cans into garbage and take work from people.
They aren't engineers and don't prefer to be called engineers, they are garbage men, always have been and always will be. It may not be the most glamorous job but it takes a real man to do it. They would all have some choice words for the engineers who designed those abominations that protrude from the truck. Source: Uncle is a former garbage man.
@@jheetman I was being respectful. They might not be engineers, but they deserve honor for what they choose to do for a career when everyone else refuses to do such a dirty job.
I see 3 problems here in this video. (1) The bins are overloaded (not the garbo's fault) (2) The bins are super flimsy and poorly designed. (not the garbo's fault) (3) Bins are placed too closely together sometimes.
our bins has a notice on the bin that they have to be 3meters apart .. over loaded bins won't be collected with a warning sticker saying why .. if they want it collected it's a 40$ fee to send someone to collect it
Man , side loader garbage trucks take the whole Claw Machine thing to an entirely new level i bet that side load operators are experts at arcade claw machines LOL 😂😂🤣
Alot of the trucks have a hopper camera. But it's up to the company if they keep them. Also sometimes they break.... I drove a much older front load that would (if you weren't used to it) send the dumpster. It threw a 2yd to the back of the hopper and smashed the camera and dropped it to the packer. Luckily I wasn't to far from the yard.
I respect these guys so much. I pay for the extra recycling bin so i don't have loose bags in my regular trash. Tip these guys if you ever get a chance! ❤
You pay for the recycling bin so they can send a separate truck out later and dump the can in with the rest of the junk when it goes back to the dump. 😂
@@pressstart1490 Nup, UA-cam is really sinister how a tiny portion of what's available to see is on offer to watch. The incredible aspect to UA-cam is how much content they totally hide. Got you thinking now!
This is true 👍 in vic au if there is something even hanging out through a closed lid they'll leave it😮 or if nothing is hanging but the lid is not touching the whole way round. it's not just one unhinged driver either, there's two so it appears to be "policy" at this point.
Nah. Driver should be skilled enough to work around it. These guys get paid $20 an hour to drive around and push a button, which is already too much. They can learn some basic maneuverability.
@@wanders278 while that is true, on another aspect is they have a route and the sooner they finish the sooner they can go dump the entire load of our CRAP and go home. If they continually return back to yard late because they have to fart around at $20/hour , then they have to answer to the higher-ups. Time is money. It doesn't hurt to do our part ....
As a guy in this industry trust me when i say most of these fails are caused by the customers not all by most so people use the bags with draw strings tie them dont pile the trash over the top of the can and dont put the cans so close together
I concur. While I hate it when they put the cans 3-4 inches apart, I do get a laugh when gripper back hands the other can and it spins. its like, take that mfer.
As a homeowner who has one of these visit each week (and it does a great job) - there is zero customer education provided. They don’t explain how the trucks work, how to load the bin, bin distances, nothing. I watched our truck a few times and sort of figured out what would work best, but the city and the waste companies aren’t doing themselves any favors. As with any machine an education needs to be at least ATTEMPTED at the household level.
@@johnmaurer3097 Where I live, the bin distances are molded right on the bin. And, while I don't know how picky they are with our new big bins, the old hand bins, if you over filled it, they'd just leave it with a bright sticker on it telling you that you filled it too high, lol. I saw one neighbor who would always put his bin out backwards. Not sure why, but they must empty it cause he kept doing it. Other tricks, like putting heavy stuff on the bottom, is something people have to figure out on their own, tho. O, and if we would get a new bin, it does come with a flyer, but I forgot what it says.
One of the hardest jobs in America, and one of the most frustrating when the cans do not cooperate, or ppl leave heavy bags by the cans, or any number of BS 2000 times a day
I work for Waste Management. I never saw so many cans being crushed or lost in the hopper. What makes things worse 1 driver is picking up trash that he drop with no gloves 🧤 that’s just nasty
Thanks for posting this video, it’s very educational. Now I know why not all of my garbage is picked up. I’ll start placing my cans a foot apart (garbage & recycleable) and I will make sure to cut up any boxes for the recycling bin. Sometimes the brown cardboard shipping boxes that are set beside the recycling bin are left behind or taken by the garbage truck personnel.
I'm surprised they don't at least have a stationary camera to look at the arm, or even a big mirror. Probably hard on the neck having to keep looking out each time.
Perfect example of an equipment which was in theory designed to make a process faster and easier, yet makes things worse tenfold. You can see the pain and agony in the operators moves.
Considering that 20 years ago EVERY trash can had to be manually emptied by workers, I don't think it's unreasonable to expect the driver to get out of the truck ONCE IN A WHILE and deal with an issue. Workers have become way too entitled and lazy about stuff lately.
I love how those machines don't bother putting the bin back where it came from just like when the blokes do it manually. Now that's attention to detail!
That's probably a big difference from country to country then, because back in the days, when it was all manual in my city (in The Netherlands), bins from a certain residential number of homes would be grouped together at a certain spot in the area, where the truck would stop and get all of them emptied in one go. But the workers would always put them back nicely packed the way they were before they arrived. The bins are still grouped in specific areas, but now all in one line, so the side-loader can easily grab them. Same as in the outer areas, where bins would be placed roadside: no matter automatic or manual collection, they would be put back where they were found. Especially the operators of the side-loaders in my city are good at putting them back at the kerbside, just centimeters where they picked them up from. It's more of a necessity here, as Dutch roads/streets are by far not as wide as most in the US.
You wouldn't believe the shit some people do I drove a side load some people were putting paint and has mat stuff in recycle. This was nothing compared to what it's really like out there. The best thing that happened to me was this one route I had the mom would bring her son out every week to watch the truck, so one week I brought him a little Tonka type trash truck the look in his eyes was priceless.
That kind of shit is punishable where I live. You don't put metal pipes into a general garbage bin. It's stupid, potentially dangerous, potentially damaging to the truck, and against the law.
@@zorkan111 That is what the council or municipality in charge of the bin pickup route would like residents to comply with. Unfortunately they end up having to deal with stupid people who don't care to inquire about what they can put into their bins, and as a result, the garbage truck designer has to over-engineer the compactor mechanism to compensate for residents that don't think to check what should go into their bins. Metal object up to a certain size can actually be quite easily compacted, this is only due to the over-engineered compaction mechanism, and was never intended to be that way. It's easier and simpler for the authority involved to use compactors that will just compact the garbage, this is why most American compactor mechanisms use a large capacity blade or wall compaction mechanism, to simplify things and allow larger oversized objects to be pushed into the back. If designed correctly, the truck still stuffs the offending item into the back of the truck, to the point where it will fall out with the rest of the load. Most garbage is fairly easy to compact and some of it can even break apart if pushed against a rigid object, thus ensuring it goes through the compactor. It's when they have too much rigidity that problems happen, and the truck driver has to return to base to get oversized objects removed from the compactor body. Some compactors are so strong they will quite easily bale metal objects in garbage. Most don't. I will point out that it is on the authority governing the pickup requirements for the resident's bin to ensure that this is adequately policed and adequately monitored. Residents, most of the time, simply don't think, this is because they don't have the time to do it properly. Fines and retraction of bin services can help with this but mostly it's a matter of which contractor will have the equipment that will be able to handle heavy and difficult to compact trash items. It's a competition to find which contractor wants a really trashy contract!
I remember when the garbage men were a team one or two riders and one driver. And they actually handled the cans. Always had less trash blowing around the neighborhood as well
Where I lived until 1991, the trash truck was the rear load type. One driver, two guys hanging onto the rear to take the lids off the metal cans then dump them in. They were quite happy the day the town bought a new garbage truck, a Mercedes. I bet they loved telling people they drove a Mercedes all day for work. ;)
Bro the way some people pack their bins is crazy. Here in Australia, you would be warned and if you do it again, they would blacklist you from pickups. Plus they just need better standardised bins and better grabbers to make the process easier.
Man I couldn't do it. That one where the bin falls in " right you fucking c**ting piece of shit. I'm not gonna get you out. Don't care if they fire me. Shouldn't be such a retard and fall in!!!!"
Been easier for the operators, if people hasn't overfilled them and put them so close together. And also, if they have had the lifting system we have in my part of Norway. Grabbing system looks like a hassle sometimes.
Yeah, I feel the same way about the grabber as well. It looks complicated (especially when bins are too close together) and judging by the fact a bin even falls in (which is such a rarity in my country (Netherlands) that I don't even know of a video of it and you usually get a letter from the city council stating that 'the truck unfortunately ate your bin. Within 2 days, someone from the city council will bring you a new one') Ours grab the bins at the ridge beneath the lid, and once they have hooked onto that ridge, a small arm rotates over the ridge, completely securing the bin to the arm, which also enables the operator to whack the living daylight out of a bin if they see (on CCTV) that some refuse is stuck inside the bin.
Why does America make life harder for humans? Here in the UK with out garbage trucks, all we gotta do is grab the bin, drag it to the back of the truck using its wheels, hook it onto a hydraulic lift on the back, press a few buttons and in it all goes. A good example of this is at 4:52
NYC has garbage everywhere laying around so have to have garbage men to pick up it up from the ground. a lot of lack of garbage discipline in NYC. stink
Sad to say but the homeowners are responsible for most of the trouble. You would think it would be common sense to space your cans out by a foot or more. Also, don't overfill your trash cans.
@@mrjon1985 🤣 I've had to do that with leftover sod. I get what everybody's saying though and I do feel bad for the garbage people especially when homeowners try and throw away furniture and poles and whatever else. If I load my cart heavy I make sure I tape a paper on that says "heavy". As far as heaping the cans go I never ever do that because that stuff ends up everywhere.
Got a co-worker that uses NO gloves and when we go eat, he doesn’t wash his hands. He just digs in as if washing your hands after picking up trash before you eat is wrong. He must have a stomach of iron 🤷🏽♂️
My buddy had a guy doing septic system work for him one time. Guy gets done, and proceeds to eat a sandwich. His hands were so dirty, he was leaving dark marks on the bread...
It varies by region, but a single driver with the lift system is becoming the most common to prevent the driver from having to get out of the truck and risk getting injured. Some places still have a driver and 1 - 2 people on the back who manually lift and dump trash into the truck.
Haha I woke up early the morning I loaded a garbage can with dirt and concrete chunks from my basement floor. It was a house I had out of state and didn't have any other way to take it to the dump before mixing and repouring it all by hand. The can had to weigh 600 pounds,I'm not sure. Probably more, I've shoved around a 600 pound generator and it wasn't as bad as that can. It took all of my 160 pounds to even get it to tilt and move. I never saw a garbage truck pitch over like 4-5 inches and hear the hydraulics grunt when picking up a can before 🤣🤣🤣 Dude didn't even blink, dropped the can and moved on.
I use to live in a trailer park when I was in Elementary, every Wednesday morning at 6:30 as the sun starts to rise 3 guys in a WM truck collect the park garbage, its a good feeling of perfect... Until the trailer park owner decided to take away the garbage cans and switch to just one of those big bins, the ones were garbage trucks with forks up front lift, and it was located at the end of the park so we all hated, especially when they overfill and they charge you extra on the lot rent
What the hell is wrong with some of these people loading their trash so high. The city should have rules. If the top of the trash lid isn't closed, then your trash won't be picked up. Buy another can!
Wow I never realized until watching this why I should have some respect for those guys. Wouldn't hurt to actually follow the rules about distance and placement of the trash cans and not over load them. Also wouldn't hurt to maybe give them a tip or Christmas card with a few $$ in it.
I have to pay $200 in garbage fees every quarter, and I have to pay $29 to throw away ANYTHING that doesn't fit in a bag. That means I have to pay $29 to throw away my $8 rake that broke. And you think I'm giving these guys a tip? You're out of your mind.
I left a tip once for my driver who would wave each week if we saw each other. The day I left it, a different guy was doing the route. He grabbed it, pocketed it, and never once looked over (I had just pulled into the driveway and gotten out of the car) or said thanks.
I like how violently these side loader trucks pick up the cans like they're angry at them or something lmao.
You typically don't get a whole lot of finesse with high-power hydraulics.
@7McQueezY7 it also depends on the control system. If it is a hydraulic pilot control, you get instantaneous positive feedback from the controls. If the control system is electrical and uses switches and solenoid valves, not so much. Pilot control systems are far superior for control and "feel", but are very complex and expensive. Both to manufacture and maintain. These trucks likely have the electrical control system, not pilot.
Probably don’t care because they aren’t getting “paid enough”
@7McQueezY7 right you are. But there is a huge difference between forestry machines and cranes, compared to garbage trucks. They dgaf about that much finesse when moving garbage cans. Could these garbage trucks be made to handle like other more precision equipment? Oh, absolutely. Are the manufacturers going to build them that way? Only if the customer is going to be willing for the increased price tag. They cheap out on a LOT of stuff on garbage truck bodies and control systems, and use that money elsewhere, like in AR500 plate steel for the hoppers, sweepers, moving wall, and lining the inside of the body, if you're lucky. Other than that, I have yet to see one that had any finesse whatsoever. But again, comparing garbage trucks to cranes is like comparing dog turds to diamonds.
Yes, the electronic controls have come a long way. But, to make them work like that there is a LOT of monitoring, computers, extra wiring, and all kinds of stuff. I would put money on it that if those side loader trucks had a bit more finesse on the movements, they would be MUCH easier to use without making a huge mess. But those kinds of features cut into the bottom line, so there goes that, right out the window.
@7McQueezY7 and to add, rather than edit, the simpler they are, the easier they are to fix and keep working. Electronic proportional control of hydraulic systems like that would be almost as far away from simple as you can get.
I feel like that robotic arm is a few stressful work days away from grabbing the nearest person and tossing them in the back to. So aggressive.
Ikr
@Repent and believe in Jesus Christ Based
Haha 😂
@@SUBARCTICPSYCHO
Based on being irrelevant and brainwashed… perhaps a tad obsessed too
😂😂😂😂😂
That robotic arm grabbing with such force literally squeezing the life out of them trashbins, made me die from laughter and pity at the same time lmao 😂😂😂
I worked on garbage trucks for a bit. The gentleman in the Mega truck has my respect. The whole purpose of the side loaded is to cut down on wear & tear on the body.
Not the neck , looking back like that must be a hell on the neck
@@FurthermoreJack suppose use the mirror but sometimes if the carts to close together the eyes alone helps you pin point where to put the grippers
The side loaders in the 80's and 90's were just as hard as the rear loaders...both syles the garbage man would have to physically place the trash into the trucks.
This truck is very luxury. My team also worked on garage truck but we very tired because we use our two hands to pick it up the garage into the truck.
@@glow2590 I drive a frontload curroto truck but still throw a lot in by hand plus large items but still easier that picking up every little thing
The Mega Disposal guy had me cracking up. Literally so much misfortune. Cussing the trash at 2:42 😂 After the first few clips of him, I laughed harder at each one. The one where the entire can goes in the truck had me on the floor though.
I started thinking that the camera guy had run along ahead of the truck setting up such a challenge course! Hahaha.
That Mega truck is a piece of S for sure. Must have been the first experimental arm or something.
@marcuslinton310 the grips on the arm are probably worn out. Most drivers in my company prefer the labrie arms like that one.
mega disposal man smoking a cigar on the job too lol
I drive a side loader garbage truck in Brisbane, Australia, and my god... the arms on these American ones have soooooooo much flex in them.
Our lifters are in-line, not offset. It makes it a much smoother process for picking up bins, but also allows us to cleanly pick up bins that are almost touching each other. I can't imagine how painful these must be to operate.
Where I live in TX, the trash company provides us with specially designed bins for the truck (kind of like what that guy had at 4:55 except ours are huge and alot tougher). It's big enough that you only need the one, so crowding isn't an issue, and their grabber is this hook that jabs under this two foot wide slot in the front of the bin. Idk if that's a good system, but they're really fast with it...like 5 seconds per stop with no exceptions that I've ever noticed.
Where I live, things like public infrastructure and services have always been pretty up to date though, compared to most of the U.S.
those CNG pythons are the most flexible
Like we use here in Sweden ua-cam.com/video/g0ij9XucZ30/v-deo.html
aussie bins also pretty strong
You're describing the older side loaders that were used in the 90's. They were definitely a better design.
Respect to all the hard working refuse engineers out there. Thanks for all you guys do for us. God bless all of you. Stay safe!
The last few clips taught me to not place the bins so close together, nor to let the bins overflow too much, and that non-government issued bins are not recommended for use. I'll refrain from doing those things from now on. I live in a house with lots of roommates, so I'll inform them as well. The easier and more pleasant we can make your day is important.
Thanks for watching and your appreciation!
The whole video taught me that sometimes the old ways can't be improved on. These machines and their operators do two things. They turn garbage cans into garbage and take work from people.
That system is just a construction failure all together 😂😂😂
They aren't engineers and don't prefer to be called engineers, they are garbage men, always have been and always will be. It may not be the most glamorous job but it takes a real man to do it. They would all have some choice words for the engineers who designed those abominations that protrude from the truck. Source: Uncle is a former garbage man.
@@jheetman I was being respectful. They might not be engineers, but they deserve honor for what they choose to do for a career when everyone else refuses to do such a dirty job.
I see 3 problems here in this video.
(1) The bins are overloaded (not the garbo's fault)
(2) The bins are super flimsy and poorly designed. (not the garbo's fault)
(3) Bins are placed too closely together sometimes.
our bins has a notice on the bin that they have to be 3meters apart .. over loaded bins won't be collected with a warning sticker saying why .. if they want it collected it's a 40$ fee to send someone to collect it
@@KAKAFU 3 meters? 9 feet LOL!
Not even half the time the truck is spilling it all over the road cause they didn’t wait the bins are the same it’s the truck that’s crushing them
@@tooterturtle7849 lol .. 1 meter ..
My company won't even pick it up if those conditions exist.
It’s like reaching in the back of the fridge for that last can of beer at 2am.
Haha 😂😂
I choked laughing so hard when he dumped the whole can.
you wouldn't be laughing if it was your trash can he dropped in the wagon
@@david197407 nothing like some good humor at someone else's expense. I bet he didn't do it again after climbing in the to get it out. 🤣🤣🤣
Me too
@@david197407 this aint a wagon
@@WesternGarbageTrucks wagon, truck, whatever you call it, same thing, where i come from they are called bin wagons
Man , side loader garbage trucks take the whole Claw Machine thing to an entirely new level i bet that side load operators are experts at arcade claw machines LOL 😂😂🤣
That’s so true!
They're mostly alcoholics and and maniacs
Deforms every can on its way. What a machine.
Some drivers in my city won't even try to pick up containers unless the lid is fully closed and most will ignore overstaked or overloaded trash cans.
Wow as you can see we don’t have that rule
That poor dude in the Mega truck 😂😂😂
In my area they will slap an overloaded sticker on the handle. If the cans are not 2' apart the lid gets a nice yellow reminder.
this/these home owner(s) is a(an) trash human. trying to make a buck off honest hard working Americans just trying to make a living.
Amen
Can't replace a crew of two guys throwing bins all day.
It’s when he dropped the whole trash bin in the truck
Ya 😂
I died 😅😅😅😂😂
That poor guy! You can tell he was trying his best.
That guy had a day😂
😃😂😂🤣🤣🤣🤣😅
I will never grumble about my career again. Hats off to the guys who collect our rubbish.
Two things I learned from this: they need a camera on top so the driver can see the can being emptied and don’t overfill your trash can.
The front loaders that take my dumpsters all have cameras.
Alot of the trucks have a hopper camera. But it's up to the company if they keep them. Also sometimes they break.... I drove a much older front load that would (if you weren't used to it) send the dumpster. It threw a 2yd to the back of the hopper and smashed the camera and dropped it to the packer. Luckily I wasn't to far from the yard.
In my city the garbage men will refuse to dump the can if the lid isn’t closed
I respect these guys so much. I pay for the extra recycling bin so i don't have loose bags in my regular trash. Tip these guys if you ever get a chance! ❤
these guys make over a 100k a year they dont need tips. tip the mechanics that work on this crap we make far less in worse conditions
@@the_chomper I just looked it up. I'm in a city of 500k in Kansas. Avg salary is $32k. 9% lower than natl avg. That's actually very sad.
@@the_chomper that’s not true. 🤦♂️ at least not in 98% of the country.
You pay for the recycling bin so they can send a separate truck out later and dump the can in with the rest of the junk when it goes back to the dump. 😂
The mega truck guy was probably stressed out about the bins and stuff
Ya that’s his only manual area tho so that’s not to bad
They would not take the bin in the UK if it's overloaded and the lid is not down
I'm sure that guy appreciated being caught on camera while experiencing all this frustration!
That mega truck is a piece of S or maybe it's the first ever experimental arm still in service.
2:40 bless that man for actually picking up what falls
Did he say Fk it!?
Where I live overloaded 'set up' or 'staged' bins are not emptied by the operators.
Man in really see you everywhere. We must watch the same videos i guess.
@@pressstart1490 Nup, UA-cam is really sinister how a tiny portion of what's available to see is on offer to watch. The incredible aspect to UA-cam is how much content they totally hide. Got you thinking now!
This is true 👍 in vic au if there is something even hanging out through a closed lid they'll leave it😮 or if nothing is hanging but the lid is not touching the whole way round. it's not just one unhinged driver either, there's two so it appears to be "policy" at this point.
Where I live you can only have 3 bags of garbage a week and if you have more they just leave them
@@Guillermogonzalazwhat the hell is with that profile picture 😂
These poor guys, I'm praying for you . I appreciate the job you guys do. Thanks 👍
watching these videos gives me even more appreciation for garbage truck drivers
I couldn't imagine his reaction dropping the whole bin 😂
Happens all the time, you just crush it and keep going. They will get a new one
That poor mega driver 💀
virtually all of these are the fault of the homeowner/renter for overloading the trash cart...
But you have to pay for extra bins 😭
@@lnteIIigence So don’t make so much trash
@@appleintosh Fair point.
Nah. Driver should be skilled enough to work around it. These guys get paid $20 an hour to drive around and push a button, which is already too much. They can learn some basic maneuverability.
@@wanders278 while that is true, on another aspect is they have a route and the sooner they finish the sooner they can go dump the entire load of our CRAP and go home. If they continually return back to yard late because they have to fart around at $20/hour , then they have to answer to the higher-ups.
Time is money. It doesn't hurt to do our part ....
"Let's hobble together a horrifying rattletrap of a robot arm and bolt it to this truck."
As a guy in this industry trust me when i say most of these fails are caused by the customers not all by most so people use the bags with draw strings tie them dont pile the trash over the top of the can and dont put the cans so close together
I concur. While I hate it when they put the cans 3-4 inches apart, I do get a laugh when gripper back hands the other can and it spins. its like, take that mfer.
As a homeowner who has one of these visit each week (and it does a great job) - there is zero customer education provided. They don’t explain how the trucks work, how to load the bin, bin distances, nothing. I watched our truck a few times and sort of figured out what would work best, but the city and the waste companies aren’t doing themselves any favors. As with any machine an education needs to be at least ATTEMPTED at the household level.
Jeopardy questions: What is a comma? What is a punctuation mark?
@@johnmaurer3097 Where I live, the bin distances are molded right on the bin. And, while I don't know how picky they are with our new big bins, the old hand bins, if you over filled it, they'd just leave it with a bright sticker on it telling you that you filled it too high, lol.
I saw one neighbor who would always put his bin out backwards. Not sure why, but they must empty it cause he kept doing it.
Other tricks, like putting heavy stuff on the bottom, is something people have to figure out on their own, tho.
O, and if we would get a new bin, it does come with a flyer, but I forgot what it says.
Not seeing a lot of garbage truck fails here but I am seeing a lot of "people failing to put their garbage out correctly" lol
One of the hardest jobs in America, and one of the most frustrating when the cans do not cooperate, or ppl leave heavy bags by the cans, or any number of BS 2000 times a day
I work for Waste Management. I never saw so many cans being crushed or lost in the hopper. What makes things worse 1 driver is picking up trash that he drop with no gloves 🧤 that’s just nasty
Thanks for posting this video, it’s very educational. Now I know why not all of my garbage is picked up. I’ll start placing my cans a foot apart (garbage & recycleable) and I will make sure to cut up any boxes for the recycling bin. Sometimes the brown cardboard shipping boxes that are set beside the recycling bin are left behind or taken by the garbage truck personnel.
2:17 this guy has to work way too hard. People don't respect trash there.
Being an adult is hard work. Trash I a thankless career.
Homie breaking more in garbage cans than what he makes. 😅
Even the dumpster arm didn’t like it’s job it was so aggressive lmao
I bet that old man that’s not using gloves eats his lunch right after touching that trash
I'm surprised that newer truck didn't have a camera in the cab so the could see the bin is empty before putting it back.
Its an option. I've worked on garbage trucks for a while. Most new trucks do.
I'm surprised they don't at least have a stationary camera to look at the arm, or even a big mirror. Probably hard on the neck having to keep looking out each time.
Dude in the Mega truck was not having a good day lol
The guy took the entire garbage bin with him😂😂😂😂
These poor guys earn every penny they make and probably deserve more!
Perfect example of an equipment which was in theory designed to make a process faster and easier, yet makes things worse tenfold. You can see the pain and agony in the operators moves.
it depends on how good the tech is implemented. the mega truck wasn't the best but most of these weren't the operators or Equipments fault
Considering that 20 years ago EVERY trash can had to be manually emptied by workers, I don't think it's unreasonable to expect the driver to get out of the truck ONCE IN A WHILE and deal with an issue. Workers have become way too entitled and lazy about stuff lately.
@@scdevonI'm residential rear load I'm out of the truck every stop
The days of old when there were no cameras watching your every move. When you had to just deal with it and move on.
The last one: The reason garbage collectors want you to leave space between bins.
Lol are these all in Rhode Island 😂😂 I keep recognizing these trucks and areas and the MTG disposal trucks operate around here. Super funny
5:12 clouds!!
That one so aggressive grabs the trash can like I grab a monster energy when it’s finished lmao
I love how those machines don't bother putting the bin back where it came from just like when the blokes do it manually. Now that's attention to detail!
That's probably a big difference from country to country then, because back in the days, when it was all manual in my city (in The Netherlands), bins from a certain residential number of homes would be grouped together at a certain spot in the area, where the truck would stop and get all of them emptied in one go. But the workers would always put them back nicely packed the way they were before they arrived.
The bins are still grouped in specific areas, but now all in one line, so the side-loader can easily grab them.
Same as in the outer areas, where bins would be placed roadside: no matter automatic or manual collection, they would be put back where they were found.
Especially the operators of the side-loaders in my city are good at putting them back at the kerbside, just centimeters where they picked them up from. It's more of a necessity here, as Dutch roads/streets are by far not as wide as most in the US.
I work on garbage trucks and I always find it satisfying when a rear loader unloads at the dump.
Pretty smooth closing that lid at 1:35
You wouldn't believe the shit some people do I drove a side load some people were putting paint and has mat stuff in recycle. This was nothing compared to what it's really like out there. The best thing that happened to me was this one route I had the mom would bring her son out every week to watch the truck, so one week I brought him a little Tonka type trash truck the look in his eyes was priceless.
5:35 That was more of a fail on the resident's part. Oversized loads are always going to have parts falling out!
That kind of shit is punishable where I live. You don't put metal pipes into a general garbage bin. It's stupid, potentially dangerous, potentially damaging to the truck, and against the law.
I agree
@@zorkan111 That is what the council or municipality in charge of the bin pickup route would like residents to comply with. Unfortunately they end up having to deal with stupid people who don't care to inquire about what they can put into their bins, and as a result, the garbage truck designer has to over-engineer the compactor mechanism to compensate for residents that don't think to check what should go into their bins. Metal object up to a certain size can actually be quite easily compacted, this is only due to the over-engineered compaction mechanism, and was never intended to be that way.
It's easier and simpler for the authority involved to use compactors that will just compact the garbage, this is why most American compactor mechanisms use a large capacity blade or wall compaction mechanism, to simplify things and allow larger oversized objects to be pushed into the back. If designed correctly, the truck still stuffs the offending item into the back of the truck, to the point where it will fall out with the rest of the load. Most garbage is fairly easy to compact and some of it can even break apart if pushed against a rigid object, thus ensuring it goes through the compactor. It's when they have too much rigidity that problems happen, and the truck driver has to return to base to get oversized objects removed from the compactor body.
Some compactors are so strong they will quite easily bale metal objects in garbage. Most don't.
I will point out that it is on the authority governing the pickup requirements for the resident's bin to ensure that this is adequately policed and adequately monitored. Residents, most of the time, simply don't think, this is because they don't have the time to do it properly. Fines and retraction of bin services can help with this but mostly it's a matter of which contractor will have the equipment that will be able to handle heavy and difficult to compact trash items. It's a competition to find which contractor wants a really trashy contract!
Here I am laying in bed at 3am watching garbage truck videos knowing full well I have work early tomorrow morning
3:39 I busted out laughing 😆
2:45. Guy barehands everything. 40 years of service and no sick days
6:12 was a test, right? They wouldn’t have taken that one in my city.
I remember when the garbage men were a team one or two riders and one driver. And they actually handled the cans. Always had less trash blowing around the neighborhood as well
Hate python arms! I run a New Way sidewinder. The best truck I driven
I drive one daily and I’m so sick of it.
New ways are pretty good
Where I lived until 1991, the trash truck was the rear load type. One driver, two guys hanging onto the rear to take the lids off the metal cans then dump them in. They were quite happy the day the town bought a new garbage truck, a Mercedes. I bet they loved telling people they drove a Mercedes all day for work. ;)
0:07 When even gravity is feeling a bit lazy…
I remember when there were two people on the back tossing in trash by hand into the back.
Bro the way some people pack their bins is crazy. Here in Australia, you would be warned and if you do it again, they would blacklist you from pickups. Plus they just need better standardised bins and better grabbers to make the process easier.
I feel like the truck is saying FML more than the driver the way it's arm aggressively grabs those trash cans 😆
When ur having a bad day I suggest skipping to these to ease ur mind. That poor man 😂😂 3:25 & 3:41
😂
Man I couldn't do it. That one where the bin falls in " right you fucking c**ting piece of shit. I'm not gonna get you out. Don't care if they fire me. Shouldn't be such a retard and fall in!!!!"
Trash disposal is a huge job, and it has huge challenges. I think these people do a damn good job under difficult conditions.
Those mack cabs are built very well
I agree. They look good as well
Laughing aside from the big going in. It makes you respect theese guys
1:24 this is why I hate those trash trucks
That dude in the Mega MTG Disposal truck needs a pay raise.
Been easier for the operators, if people hasn't overfilled them and put them so close together. And also, if they have had the lifting system we have in my part of Norway. Grabbing system looks like a hassle sometimes.
Yeah, I feel the same way about the grabber as well. It looks complicated (especially when bins are too close together) and judging by the fact a bin even falls in (which is such a rarity in my country (Netherlands) that I don't even know of a video of it and you usually get a letter from the city council stating that 'the truck unfortunately ate your bin. Within 2 days, someone from the city council will bring you a new one')
Ours grab the bins at the ridge beneath the lid, and once they have hooked onto that ridge, a small arm rotates over the ridge, completely securing the bin to the arm, which also enables the operator to whack the living daylight out of a bin if they see (on CCTV) that some refuse is stuck inside the bin.
Are you talking about the huge in ground trash bins that are lifted out with a crane?
Why does America make life harder for humans?
Here in the UK with out garbage trucks, all we gotta do is grab the bin, drag it to the back of the truck using its wheels, hook it onto a hydraulic lift on the back, press a few buttons and in it all goes.
A good example of this is at 4:52
REMEMBER THE OLD DAYS WHEN 2 GUYS USED TO HANG OFF THE END OF THE TRUCK THEN GET OFF TO THROW THE TRASH INTO THE TRUCK
NYC STILL DOES THAT
NYC has garbage everywhere laying around so have to have garbage men to pick up it up from the ground. a lot of lack of garbage discipline in NYC. stink
Sad to say but the homeowners are responsible for most of the trouble. You would think it would be common sense to space your cans out by a foot or more. Also, don't overfill your trash cans.
Also, who puts dirt in a trash can?
@@mrjon1985 well what else are you supposed to do with yard debris, pay a $50 landfill minimum for 10lbs of dirt and take it down there in a Mercedes?
@@sebrofc Not to say I haven't put some shady stuff in a trash can. At least bag it up, you know, hide the evidence.
@@mrjon1985 🤣 I've had to do that with leftover sod. I get what everybody's saying though and I do feel bad for the garbage people especially when homeowners try and throw away furniture and poles and whatever else. If I load my cart heavy I make sure I tape a paper on that says "heavy". As far as heaping the cans go I never ever do that because that stuff ends up everywhere.
or don't invent some stupid small looking machine hand to grab the trashcan and actually do the labor like the good old days.
Always love it when the entire bin just goes in.
1:43 props to this guy for grabbing 2 cans in 1 claw and managing to not spill any garbage even on the way down
Didn’t even notice that
Got a co-worker that uses NO gloves and when we go eat, he doesn’t wash his hands. He just digs in as if washing your hands after picking up trash before you eat is wrong. He must have a stomach of iron 🤷🏽♂️
Geez that makes me suck just thinking of it. I hope he stays well
My buddy had a guy doing septic system work for him one time. Guy gets done, and proceeds to eat a sandwich. His hands were so dirty, he was leaving dark marks on the bread...
Is it usual in US that the dumptruckdirvers are alone? Its a complete different system as we have in Austria.
It varies by region, but a single driver with the lift system is becoming the most common to prevent the driver from having to get out of the truck and risk getting injured. Some places still have a driver and 1 - 2 people on the back who manually lift and dump trash into the truck.
After watching this video, im almost positive my garbage man appreciates me putting all the trash into bags of good quality.
Sorry they got it easy I had to lift all the trash cans by hand and 55 gal barrels that were full of shit
That 1 guy that sucks but keeps coming to work every single day
If our lids don't close, even sticking up 1 inch they refuse to empty it.
That one guy with the crappy claws and ungrippable trash cans had the WORSE time 😂🤣
Haha I woke up early the morning I loaded a garbage can with dirt and concrete chunks from my basement floor.
It was a house I had out of state and didn't have any other way to take it to the dump before mixing and repouring it all by hand.
The can had to weigh 600 pounds,I'm not sure. Probably more, I've shoved around a 600 pound generator and it wasn't as bad as that can.
It took all of my 160 pounds to even get it to tilt and move.
I never saw a garbage truck pitch over like 4-5 inches and hear the hydraulics grunt when picking up a can before 🤣🤣🤣
Dude didn't even blink, dropped the can and moved on.
3:50 😭😂oml that can falling in the truck had me
@ 3:35... well this sums up the ENTIRE vid... i mean what's the point of having side arm operations if the city doesn't use the correct carts
Yup 😂😂😂. That’s how mega does it
My preference seems to be the one w/the bigger arm, looks cooler
I wish the people space out the cans more. That be nice. Thank you people i know you can do it.
No matter what you say nothing beats two men on the back of a truck as far as getting all of it ‼️
really did get a good laugh out of mega lmao
😂 same here. That was a fun day
same here,not at the operators,but at the absurdities of modern life.
The older guy in the mega truck was going through it 😂😂
I use to live in a trailer park when I was in Elementary, every Wednesday morning at 6:30 as the sun starts to rise 3 guys in a WM truck collect the park garbage, its a good feeling of perfect... Until the trailer park owner decided to take away the garbage cans and switch to just one of those big bins, the ones were garbage trucks with forks up front lift, and it was located at the end of the park so we all hated, especially when they overfill and they charge you extra on the lot rent
5:22 I just wanna reach through the screen and grab that scrap metal
What the hell is wrong with some of these people loading their trash so high. The city should have rules. If the top of the trash lid isn't closed, then your trash won't be picked up. Buy another can!
The arm swing should be on the back of truck and have a second person to help
Tough job. Especially having to constantly pick up bags because people overfill their cans.
Imagine having actual garbage men whose job is to put the bags in the truck.
Regardless of how they got to the street.
I'm surprised they do it. I'm pretty sure some places they won't even empty the can.
Would rather roll dumpsters all day than run the swingarm
Where's my fails lol I'm kidding good job
Don’t worry you’ll be in one of them soon. You 3x fail 🤣
The garbage man’s face at 7:28 is so funny 🤣 😅
😂
Wow I never realized until watching this why I should have some respect for those guys. Wouldn't hurt to actually follow the rules about distance and placement of the trash cans and not over load them. Also wouldn't hurt to maybe give them a tip or Christmas card with a few $$ in it.
I have to pay $200 in garbage fees every quarter, and I have to pay $29 to throw away ANYTHING that doesn't fit in a bag. That means I have to pay $29 to throw away my $8 rake that broke. And you think I'm giving these guys a tip? You're out of your mind.
I left a tip once for my driver who would wave each week if we saw each other. The day I left it, a different guy was doing the route. He grabbed it, pocketed it, and never once looked over (I had just pulled into the driveway and gotten out of the car) or said thanks.
I love that waste management just put like a magnet over the logo on the trucks 🤣 must have just bought out the company
At the start of the video did WM just rent a truck from another company?
Cause idk did WM bought a new truck or they rent from another company because it looks new
Ya we had a lot of trucks down last year so got some rentals
@@TruckMaster642 , oh