1999 Nissan Maxima Power Steering and Alternator Belt Change

Поділитися
Вставка
  • Опубліковано 20 жов 2024
  • This tutorial is for the removal and installation of 1999 Nissan maxima
    power steering pump and alternator belts.
    All tools required are mentioned in the video. Torque specs are listed in the job aid pulled from the vehicle FSM.
    The advice in this tutorial video is only meant as a guide. Follow procedures from the vehicles FSM. Perform maintenance on your vehicle at your own risk. No responsibility is taken by the creator of this content if followed by viewers.

КОМЕНТАРІ • 14

  • @julianibarra6119
    @julianibarra6119 Рік тому +1

    You're a big help on the power steering and like you said that big boat in the back it's the challenge someone thank you for your info appreciate it

  • @pamparker4047
    @pamparker4047 Рік тому

    i enjoyed your video plus learned a lot

  • @ganarrubi326
    @ganarrubi326 Рік тому +1

    Yeah u explain pretty well

  • @Ken-BurnForever
    @Ken-BurnForever 2 роки тому +1

    Thank you for this

    • @rollingreasy2521
      @rollingreasy2521  2 роки тому

      I'm glad it helped. Thats why I keep doing these videos.

  • @charlesguinn4316
    @charlesguinn4316 11 місяців тому

    Just did both belts on my 96 Max-- Wow, what a PITA!!!
    However, It will be easier next time. I did not expect it to be so tedious.
    FYI the big belt is easy, the smaller P/S (belt/adj bolt) does take forever to loosen, the lock bolt is nearly impossible to reach and the adjuster bolt threads are reversed... smh

    • @rollingreasy2521
      @rollingreasy2521  10 місяців тому

      Lol, yeah that job is a pain. My arms were dead tired after the power steering adjuster bolt.

  • @tonycervantes4816
    @tonycervantes4816 2 роки тому +1

    Do u have a video how to remplace of rotors and brake pads sir??

    • @rollingreasy2521
      @rollingreasy2521  2 роки тому +1

      Unfortunately no. But the easy way is to remove the two bolts that attach the caliper to the steering knuckle and hang the caliper and rotor with a bungie cord from the strut spring. The you can remove the rotor. Put the new rotor on, pop the new pads in the caliper and install the caliper back on the steering knuckle. Torque the two bolts to 80 ftlbs.

    • @tonycervantes4816
      @tonycervantes4816 2 роки тому

      @@rollingreasy2521 woww thanks 👍.sir. .. you help me a lot..

  • @jordancannon4011
    @jordancannon4011 6 місяців тому

    I loosened all the bolts but the belt just won’t come loose. Am I doing something wrong?

  • @ganarrubi326
    @ganarrubi326 Рік тому

    Iam working power steering pump

  • @dezjoseph9541
    @dezjoseph9541 2 роки тому

    I cannot figure out which 14mm bolt in the rear...I see 2..I lower 1 higher

  • @themechanic4222
    @themechanic4222 Рік тому

    Who has 1998 maxima ? and how many miles on it ? Mine 344k