Your guide was by far the most useful. The speedo and climate control were by far the hardest to get out. Blocking the left side of the display like you did is how i got the right side out. That clip in particular is seriously difficult.
Finally did it and it works again! The central cover was difficult to remove, some pins cracked but i put some loctite on it and they were okay. You can put some grease on the top of the pins so they click better in place. Thanx
να'σαι καλά Κωνσταντίνε. Θα το δοκιμάσω μιας και άρχισε να δείχνει τρελλά εδώ και λίγες μέρες.. Εμένα εκτός από το ρολόι, έχει θέμα και το κοντέρ. Δείχνει "περίεργα" ανά φάσεις, όχι πάντα. Θα πρέπει μάλλον να κάνω παρόμοια διαδικασία και για εκείνο.
Γεια σου φίλος, απ'οτι καταλαβα πολλοί έχουμε το ίδιο πρόβλημα, απορώ πως δει είχε γίνει καμιά ανάκληση, εγώ το 'χω κάνα δυο χρόνια αλλά τώρα παραγεινε και πρέπει να πάω να το κάνω, μόνο το καλοκαίρι όταν το βαρουσε καμιά ώρα ο ήλιος έστρωνε 😀😀 ..
Καλησπερα και ευχαριστουμε για το βιντεο. Ηθελα να ρωτησω. Εμενα καποιες φορες, οταν εχει ζεσταθει για καποιον λογο το radio, κανει ενα «τσαφ» και κλεινει μονο του. Μετα ισως ανοιξει μονο του. Μηπως το εκανε και εσενα; Αν ναι, τι μπορει να φταιει; ΥΓ: ειναι αυτα τα κλιπ της Honda απιστευτα σκληρα!!!
Hi everyone , I have a problem with the odometer lightning in my civic hatch 2009. It goes off very often now and when i touch the dimmer knob it come on again but the light doesn't stay on long...??? It definitely needs a repair . Is here anyone who has ever experienced the same problem and fixed it... any suggestion appreciated
Hello, we have an other kind of problem, at first, it was like your problem: some number fade away, now it shows random figures and signs, it's totally unreadable. Is this the same problem? (soldering?)
6 років тому+2
Mine is just like yours... but if I slap it hard sometimes everything goes back as normal. LOL I will try to resolderer this in the next weeks.
@@ΚωνσταντινοςΘεοδωρου-η5π Hello, i wil fix it end of december, we will not use the car at the end of the year. 3 questions: 1: do you heat the pins? 2: do you only touch the soldering? 3: doe you add new soldering? Thank you
Chris if you don't know how to solder it I would strongly recommend to give the job to a professional. It 'll cost you far less than buying a new part.
Luís Miguel Cunha Ribeiro hi, some of the soldering will be cracked (they move slightly) and need resoldering. If you don't know how to check it, give it to somebody that has experience in electronics. Even if you have to pay him it will cost you far less than a new part.
6 років тому
I tried to take it off today but unfortunately the clock didn't came out... I removed the odometer and half of the clock but the right side refused to come out!! I placed everything back in place and also chiped a little plastic in the corner. However the unit was functioning fine... let's see for how long.
@ hi, the right side is quite stiff that's why you have to hold the left side with your hand while you pull it out. The two sides have to come out at the same time.
Αν δεν έχεις εξοικείωση με τέτοιες κολλήσεις καλύτερα να πάς την πλακέτα σε κάποιον ηλεκτρονικό για να σου κάνει καλές κολλήσεις και να μην ξεμοντάρεις ποτέ ξανά. Θα σου πάρει ελάχιστα χρήματα σε σχέση με οτι θα δόσεις για αγορά ανταλλακτικού. Εάν πάλι έχεις εξοικείωση πρέπει να αφαιρέσεις το παλιό καλάι και να βάλεις καινούριο για να είσαι σίγουρος
Καλησπέρα..εχω κ εγω πιθανόν το ίδιο πρόβλημα. Ορισμένες φορές χάνονται ψηφία απο τν οθόνη. Ορισμένα "πίξελ"..αλλα οταν πατάω με το χέρι στρώνει. Φταίει το κενο πίσω απο τν οθόνη κ θελει αλλαγή στο καλαι? Η απλά πάτημα με συγκολλητη? Ευχαριστώ εκ των προτέρων.
I was cleaning my car today and i cleaned the dashboard with dashboard wipes and after cleaning the clock screen got like bubbles and i think it is from inside but i dont know how it happened. This wasnt the first time i clean it . do you know is it possible to clean the screen from inside? i looked over internet and maybe i am the first one to have such problem. Thank you
Hi Mostafa, I cant imagine how could the detergent pass behind the screen I would suggest you to let it dry first. If there are still stains you can follow the video directions until 3:10 then you remove ALL the white box. You have to unclip the black clips. You clean put everything back together and you are ready
Great video it helped me a lot. I've just put my car back together. Although I bought a replacement clock off eBay to save soldering the old one. I found a whole clock unit for £20 which was lucky as some the the plastic facia around the LCD Screen cracked when I removed it. I don't know why but my units were really tight and it took a lot of force to remove them. It's all back tougher now though working nicely. I'd just advised anyone to take care when removing the panels it's pretty easy to damage the plastic. Thanks again 👍
THANK YOU! Thanks to your tutorial, and the mastery of my friend Luz DiJ (www.mixcloud.com/LuzDiJ/ ) my display has returned as new! Now I can read the time! The internal temperature! Thanks again!
Your guide was by far the most useful. The speedo and climate control were by far the hardest to get out. Blocking the left side of the display like you did is how i got the right side out. That clip in particular is seriously difficult.
Fixed, liked. Thanks. For those of you (like me) who are useless at soldering, electrical contact cleaner spray did the job for me.
Hello did it still work with spray contact?
Finally did it and it works again! The central cover was difficult to remove, some pins cracked but i put some loctite on it and they were okay. You can put some grease on the top of the pins so they click better in place. Thanx
Thank you very much for the easy explain, this works great for me, it took me 30 minutes to repair it. GREAT VIDEO
Hey another trick😃 give a slap on the central panel . It’s worked for me 👌
Just a short term solution.
Does it still work?
this works for me but very short term as the fault re appears
Είσαι ωραίος! Ευχαριστώ
Κανε και κανενα like 😉
να'σαι καλά Κωνσταντίνε. Θα το δοκιμάσω μιας και άρχισε να δείχνει τρελλά εδώ και λίγες μέρες.. Εμένα εκτός από το ρολόι, έχει θέμα και το κοντέρ. Δείχνει "περίεργα" ανά φάσεις, όχι πάντα. Θα πρέπει μάλλον να κάνω παρόμοια διαδικασία και για εκείνο.
Το εφτιαξες τελικά;
WORKED FOR ME . THANKS
Γεια σου φίλος, απ'οτι καταλαβα πολλοί έχουμε το ίδιο πρόβλημα, απορώ πως δει είχε γίνει καμιά ανάκληση, εγώ το 'χω κάνα δυο χρόνια αλλά τώρα παραγεινε και πρέπει να πάω να το κάνω, μόνο το καλοκαίρι όταν το βαρουσε καμιά ώρα ο ήλιος έστρωνε 😀😀 ..
Ανάκληση; Όχι φυσικα, ο Ιάπωνας κάνει τον Κινέζο...
Thank you for this video.
Thanks a lot! It works!
Καλησπερα και ευχαριστουμε για το βιντεο. Ηθελα να ρωτησω. Εμενα καποιες φορες, οταν εχει ζεσταθει για καποιον λογο το radio, κανει ενα «τσαφ» και κλεινει μονο του. Μετα ισως ανοιξει μονο του. Μηπως το εκανε και εσενα; Αν ναι, τι μπορει να φταιει;
ΥΓ: ειναι αυτα τα κλιπ της Honda απιστευτα σκληρα!!!
Το δικό μου είχε μονο πρόβλημα στην οθόνη . Τα κλιπς ειναι όντως πολύ σκληρα
@@ΚωνσταντινοςΘεοδωρου-η5π Θα το ψαξω να δω τι μπορει να φταιει... Μου το κανει οταν ζεσταθει ή οταν εχω ανοιξει το καλοριφερ
@@ΚωνσταντινοςΘεοδωρου-η5π Περασα τις κολλησεις. Τωρα εχω προβλημα με την οθονη. Σαν να εχει χαμηλη φωτεινοτητα. Τα segments προς το παρον φαινονται..
Hi everyone ,
I have a problem with the odometer lightning in my civic hatch 2009. It goes off very often now and when i touch the dimmer knob it come on again but the light doesn't stay on long...??? It definitely needs a repair .
Is here anyone who has ever experienced the same problem and fixed it... any suggestion appreciated
hello, can the car be driven with the screen removed?
Yes it can, sorry for the late answer
Thanks.
Happy that you found it helpful. Please give it a like 👍
Hello, we have an other kind of problem, at first, it was like your problem: some number fade away, now it shows random figures and signs, it's totally unreadable. Is this the same problem? (soldering?)
Mine is just like yours... but if I slap it hard sometimes everything goes back as normal. LOL I will try to resolderer this in the next weeks.
Hi, I believe that following my instructions is going to solve your problem. Give it a try and let me know.
@@ΚωνσταντινοςΘεοδωρου-η5π Hello, i wil fix it end of december, we will not use the car at the end of the year. 3 questions: 1: do you heat the pins? 2: do you only touch the soldering? 3: doe you add new soldering? Thank you
Great video, very helpful. But why remove the speedometer to fix the radio/ac/clock display?
The parts are overlapping. You have to do so
Ah ok that makes sense thanx a bunch dude have a great saturday!
you re welcome, give a like please
Nice Vid, but how exactly do you do the solder repair??
Any vids on that?
Chris if you don't know how to solder it I would strongly recommend to give the job to a professional. It 'll cost you far less than buying a new part.
Hi can you recommend a professional who would do this for me? In London?
hi Faisal, www.google.com/search?q=london+electronic+repair&sourceid=ie7&rls=com.microsoft:el-GR:IE-SearchBox&ie=&oe=
Can you specify how to repair the soldering? Thank you
Luís Miguel Cunha Ribeiro hi, some of the soldering will be cracked (they move slightly) and need resoldering. If you don't know how to check it, give it to somebody that has experience in electronics. Even if you have to pay him it will cost you far less than a new part.
I tried to take it off today but unfortunately the clock didn't came out... I removed the odometer and half of the clock but the right side refused to come out!!
I placed everything back in place and also chiped a little plastic in the corner. However the unit was functioning fine... let's see for how long.
@ hi, the right side is quite stiff that's why you have to hold the left side with your hand while you pull it out. The two sides have to come out at the same time.
φίλε μου καλησπέρα, πως έφτιαξες τα σημεία που είναι κολλημένο με καλάι απλα τα ζέστανες;
Αν δεν έχεις εξοικείωση με τέτοιες κολλήσεις καλύτερα να πάς την πλακέτα σε κάποιον ηλεκτρονικό για να σου κάνει καλές κολλήσεις και να μην ξεμοντάρεις ποτέ ξανά. Θα σου πάρει ελάχιστα χρήματα σε σχέση με οτι θα δόσεις για αγορά ανταλλακτικού. Εάν πάλι έχεις εξοικείωση πρέπει να αφαιρέσεις το παλιό καλάι και να βάλεις καινούριο για να είσαι σίγουρος
Κωνσταντινος Θεοδωρου
Οκ καταλαβα, πρέπει να βγει το παλιό καλαι ε; δεν ειναι οτι κάποια απο αυτα κουνιόταν
οι ρωγμές που έχουν είναι πολύ λεπτές και το κούνημα είναι ελάχιστο. Το κενό αυτό όμως κάνει όλη τη ζημιά
Καλησπέρα..εχω κ εγω πιθανόν το ίδιο πρόβλημα. Ορισμένες φορές χάνονται ψηφία απο τν οθόνη. Ορισμένα "πίξελ"..αλλα οταν πατάω με το χέρι στρώνει. Φταίει το κενο πίσω απο τν οθόνη κ θελει αλλαγή στο καλαι? Η απλά πάτημα με συγκολλητη? Ευχαριστώ εκ των προτέρων.
@@SENTSOZ το καλύτερο είναι αλλαγη του καλαϊ, σε καποια φορουμ διαβασα οτι ειναι κακης ποιότητας οποτε δεν το ρίσκαρα
I was cleaning my car today and i cleaned the dashboard with dashboard wipes and after cleaning the clock screen got like bubbles and i think it is from inside but i dont know how it happened. This wasnt the first time i clean it . do you know is it possible to clean the screen from inside? i looked over internet and maybe i am the first one to have such problem. Thank you
Hi Mostafa, I cant imagine how could the detergent pass behind the screen I would suggest you to let it dry first. If there are still stains you can follow the video directions until 3:10 then you remove ALL the white box. You have to unclip the black clips. You clean put everything back together and you are ready
Thanks a lot and really I am still schocked about how that happened :) Thanks again :)
Great video it helped me a lot. I've just put my car back together. Although I bought a replacement clock off eBay to save soldering the old one. I found a whole clock unit for £20 which was lucky as some the the plastic facia around the LCD Screen cracked when I removed it. I don't know why but my units were really tight and it took a lot of force to remove them. It's all back tougher now though working nicely. I'd just advised anyone to take care when removing the panels it's pretty easy to damage the plastic.
Thanks again 👍
THANK YOU!
Thanks to your tutorial, and the mastery of my friend Luz DiJ (www.mixcloud.com/LuzDiJ/ ) my display has returned as new!
Now I can read the time! The internal temperature!
Thanks again!
Υπάρχει κάποιος που να μπορεί να το επισκευάσει στην περιοχή της Αθήνας;;;;;;
Σε οποιονδήποτε που επισκευαζει ηλεκτρονικα. Χρειάζεσαι κάποιον να ξέρει να κάνει καλές κολλήσεις.