Piranha YX 140cc - Unboxing & Pre Installation Prep
Вставка
- Опубліковано 15 лют 2021
- This video will explain everything you need to know on the IMPORTANT
Pre Installation Prep for the YX 140cc aka Piranha 140cc engine
Oil change
Valve Adjustment / Tappets
Top dead center / TDC
Carb install
Wiring
What Bolts go where
Tips and tricks
and it will show you what exactly you get when you order a new engine
like this from TBolt USA.
Thanks for Watching!
Link to Engine:
tboltusa.com/store/piranha-14...
Music by : Daniel Groza
👍🏼 beautiful 👍🏼
I realise this is a bit late, but I'm about to put the 140 in my Sachs Madass, which had the electric start Lifan 120cc. I'm struggling with the wiring conversion. Did you make a video in regard to this? or have a schematic for the wiring?
I can’t wait to order mine 😢
What size air filter do you put on the carb
Do you have any experience with the lifan 125 engine? I still have a stock chinese bike from when I was a kid, your videos made me consider riding it again. My plan is upgrading to a race cam and a vm24 carb. I hope that gets me some acceptable power because I am on a budget.
Is there a bore kit available for the yx140?
Hello. Very good video. Thank you for sharing. I just unboxed a new Piranha 140 semi auto with e start. I noticed weird head casting that seems to be purposely broken. I see the same piece on your motor at exactly
Hi. Should I put lube to the chains in the engine or do I just leave them dry?
just bought one did the exact same thing😭🙏
T-bolt pretty much always includes throttle cables and clutch cables with their engines
Would the valve adjustment help with kickback?
Do you know if this motor will fit in the Coolster QG-214S-2 frame?
I have a 140yx engine and it's extremely hard to start. It doesn't turn on without using the gas but when i use it the bike kicks back like a horse. Also when i rev it idles stay kinda high for sometime but then decrease so much that it sounds like the engine is shutting off.
it started first kick 😭🙏
Need a video on float height settings and adjustments on the piranha 125cc mikuni carb please, having a hard time finding the correct info on the procedure and can’t think of anyone better to do one than you!
so I installed this motor on my frame I started it up just to make sure the wiring worked. I totally forgot to check this stuff. I would assume since I didn't ride it or even if I did I could still go in and adjust this stuff?
I just got my piranha 125cc today can’t wait to put it on!!, I have a question, at
Does it always come with the wiring harness
Do the yx 140cc motors come with the z40 racing cams from factory?
man sorry for disturbing you... i have an ycf pilot f150 2016... in the manual says 600 ml and when i ask a man from ycf page for answers said to me 900 ml... can you help me please? idk what oil quantity to pour and i driving me crazy... i think it s the same engine... what do you think?