If you’re enjoying the content, don’t forget to *hit the like button* on my video ❤. It may not look like it at times.. but I am wearing shorts. *Terrible choice of color* as It looks a lot lighter on film than it does in person lol
Just a tip from a former mechanic, ONLY use IMPACT sockets with an impact gun, Chrome sockets are normally weaker and will shatter. I want you to stay as pretty as you are!
ha what i did to remove the leaf springs on a rear end i got for my car was i just used an angle grinder and cut the u bolts because the nuts were refusing to come off. made the job a whole lot quicker specially since i wasnt planning on using those parts to begin with. In either case, i dont think it wouldve been an issue to unbolt the back of the leaf springs and then unbolt the front and just pulled the rear end with the leaf springs and shocks all in one go. But looks like a fun adventure regardless. Keep up the great work!
A woman who loves cars is near and dear to my heart. I'm really happy I found your channel, it's like stumbling across an original 69 Mustang Mach 1 with a 428 Cobra Jet and only 10,000 original miles that's been tucked away for 40 years. As far as "Junk in the trunk", if it's your junk... just call me Fred G. Sanford! The G stands for "Good Gawd"!
Everything you do is hysterical. Restored many early mustangs and Cougars so I know what you're going through. Every part has a specific name. Those rear leaf "brackets" you refered to are called shackles. Also when working on a 50 + year old car, spray everything with PB Blaster penetrant. Works great 👍 and saves from bloody knuckles... Keep up the good work, love watching you work.
Love your transparency your willingness to share what you are truly thinking as tackle disassembly of your Mustang. Your willingness to laugh at yourself is refreshing. You are learning things that the majority of us will never learn. Be ready to learn a bunch about welding while you blow holes 50 year old sheet metal. Whenever you can get aftermarket floor pans. And by the way I am a journeyman welding hole enlarger 😔
Rule of thumb if you are removing a gas tank it's always,full good thing it's old and has a drain plug. Always wear safety glasses and be safe. If you mark around the hood and trunk hinges before removing them will help with installation and alignment to put it back together on install. Your shorts looked fine but more light would make a better video.
I don't care what you say Doris, you have just the right amount of "Junk in the/your Trunk" Love your videos, especially when you are working on vehicles from my era.
Unlosen the top of the shock, leave it on the ground with the wheels on, remove the bolts from the shackles, raise the car and wheel away the rear end😅. Work smarter not harder😅. Keep up the good work though😊.
You're doing a great job Doris, learning as you go, as we all did. If I may make a request, please wear your safety glasses more often. You have very pretty eyes; we want nothing to happen to them.
![Customer States & Mechanical Fails [Ep 43]](http://i.ytimg.com/vi/tUE02Nv3tF0/mqdefault.jpg)
If you’re enjoying the content, don’t forget to *hit the like button* on my video ❤.
It may not look like it at times.. but I am wearing shorts. *Terrible choice of color* as It looks a lot lighter on film than it does in person lol
Miss i know you're being careful but, I'm worried.
Just be extra cautious it won't hurt 🙂
I love videos about golden showers and squirting. 🤣 🤣
Never lose that Beautiful figure 😮😊😎👍❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️🏹
I don't mind😂😂😂❤
Color looked fine to me lol
She said golden shower lol i like how she slips in the jokes ❤ love her
It's so satisfying watching everything coming apart. I always liked taking things apart, but not so good putting them back together. lol
“the front job”
stay hydrated!
👏🏽🤓👍🏽♥️
Just a tip from a former mechanic, ONLY use IMPACT sockets with an impact gun, Chrome sockets are normally weaker and will shatter. I want you to stay as pretty as you are!
💯
The likes ticker is moving like a gas ⛽️ pump! 😅😂
ha what i did to remove the leaf springs on a rear end i got for my car was i just used an angle grinder and cut the u bolts because the nuts were refusing to come off. made the job a whole lot quicker specially since i wasnt planning on using those parts to begin with. In either case, i dont think it wouldve been an issue to unbolt the back of the leaf springs and then unbolt the front and just pulled the rear end with the leaf springs and shocks all in one go. But looks like a fun adventure regardless. Keep up the great work!
This video got me zooming in and out throughout the whole video 😂😍
I must've been looking at other rear end, cause i didnt learn nothing bout mechanics today !!! 😂😂😂💕💕💕
A woman who loves cars is near and dear to my heart. I'm really happy I found your channel, it's like stumbling across an original 69 Mustang Mach 1 with a 428 Cobra Jet and only 10,000 original miles that's been tucked away for 40 years. As far as "Junk in the trunk", if it's your junk... just call me Fred G. Sanford! The G stands for "Good Gawd"!
08:55 best moment😁
Cars are fun but cars are more fun with Doris 😊
Everything you do is hysterical. Restored many early mustangs and Cougars so I know what you're going through. Every part has a specific name. Those rear leaf "brackets" you refered to are called shackles. Also when working on a 50 + year old car, spray everything with PB Blaster penetrant. Works great 👍 and saves from bloody knuckles... Keep up the good work, love watching you work.
omg a doggo in the background 😍
Yes. Two of my little beauties ❤️
The hardest part of welding is convincing yourself you can do it. Lots of scrap metal and practice … you got this!.
Love your transparency your willingness to share what you are truly thinking as tackle disassembly of your Mustang. Your willingness to laugh at yourself is refreshing. You are learning things that the majority of us will never learn. Be ready to learn a bunch about welding while you blow holes 50 year old sheet metal. Whenever you can get aftermarket floor pans. And by the way I am a journeyman welding hole enlarger 😔
Love the giggle as you work through all your processes…
I swear a bit lol. It would be fun to wrench with you 👍🏻
No camels were harmed in this video.
😂😂 Right!
I have been watching you work on cars for years, my wife and I love what you do!
I absolutely love your determination
You are one awesome mechanic!!!!❤
I respect your knowledge and workmanship in mechanics 💪🏽 so fun watching you work...however I'm falling in love in each and every video 😔 lol
Rule of thumb if you are removing a gas tank it's always,full good thing it's old and has a drain plug. Always wear safety glasses and be safe. If you mark around the hood and trunk hinges before removing them will help with installation and alignment to put it back together on install. Your shorts looked fine but more light would make a better video.
If your not learning... 💯 with the dirty macanic jokes😂.
Awesome you’re figuring out everything 👍👍 You will do fine at welding 👍😁 Thank You For Sharing 👍🙏
Love to see ladys working on cars so 🔥 👌👌👌🤩🤩💯❤️💪🏾
Gr8 Junk in the Trunk & Gr8 4 releasing TENSION outta the System
Love a woman who love cars like me love it oh and i love your accent ❤ looking forward the next video 😊
hi doris golden shower made me laugh ,yep i am still here enjoying ya content lmao from across the pond !
You should do a fastback conversion on your mustang. The make kits for all the metal.
There can never be too much junk in the trunk 👍
thats the exact correct amount of "junk in the trunk" Doris😉❤️
The frunk and the trunk looks AMAZING!!!
❤looking mmmm good❤
Great work, Doris! Well done.
Gracias.por tus videos saludos desde.houston.texas.vendisiones.❤❤❤
Nice job🎉
I am waiting on the uspto to finish and I will be giving permissions to certain people to build a engine and test it for themselves.
Man I had to blink 5 times !!!!!
Tell me about it. Had to adjust color in post to make it look like how it should lol
Great job. I know guys who wouldn't dare tackle a rear end job. 😅
I don't care what you say Doris, you have just the right amount of "Junk in the/your Trunk" Love your videos, especially when you are working on vehicles from my era.
Hi Doris,
Love your hard work.
Those pants look so nice on you.❤
Absolutely wonderful picture like old motors aswell
Understand woman driver wow you are intelligent beautiful lady keep on with the great work love your video right on woman driver 💪💪🌎♥️😄
Creamsicle never tasted so good
No matter your age. If that doesn't getting things working. You are liven under a rock.
Excellent content! Great ASSet to car building 😊
A beautiful lady who enjoys vehicles and working on them. That's everything a real man would love !!
13 :08 ❤
That upper body strength is being tested today lol.😅 💪🏼
Ugh.. tell me about it. I’m just happy nothing was stripped or seized lol
Nicely done 👍🏼
I've been watching you for years and there is nothing that you can't do so just keep at it...
Great job 👏 😊
Never use impact to remove gas tank sparks from brushes can make it explode
Beautiful ❤❤❤
Yessssss🌻🌾🌾🌼🌳goood
Wife : what are you doing
Me : watching car repair on youtube
WIfe : OK honey
🤣🤣🤣
All I can focus on was that Camry. What a car.
Como la mujer maravilla, eres fenomenal!! Bella como una diosa griega que vino del olimpo,para que nosotros,los humildes mortales, te admiremos .❤❤❤❤
Those shorts….wow….made my day
Love that big junk in your truck
I like that junk in her front
We all love it 😂
I had to remove my tires more grips.
Unlosen the top of the shock, leave it on the ground with the wheels on, remove the bolts from the shackles, raise the car and wheel away the rear end😅. Work smarter not harder😅. Keep up the good work though😊.
Love the video and awesome. 🙂🙂
I would love to see her using a mechanic's creeper with a molded backrest.
Great content, not too bad getting dirty, the old cars can trash clothes. Great research on getting the fuel tank out,
the pre-tank strap cars.
Thank you! Tried to stay clean but that went out the door towards the end lol.
Doris,you rock! Wow, at all that junk in the trunk. Peace ❤
your just supper cool 🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰
Wow! Where'd you get your training and skill from? Good work! 😮😊
All trial and error. But mainly just reading about what needs to be done, other YT videos and forums.
Attendance check ☑️
Did anyone count how many innuendos she dropped ?
Best looking trunk I've seen Beautiful ❤❤❤❤❤❤
Did you have your hair done this morning, cause its looks just great. and by the way UUUUHHHHH i love to see you work on one of your cars. 😍😍😍😍❤❤❤❤
I've noticed this lately too.
Where is your other UA-cam pages. I can't find them
Came her because of the screen capture! ❤😅
I gotta say it's good you protect your gorgeous eyes..
Perfect color and damn you be wearing them shorts tho lol dammit
"Milwaukee time"
Ma girl 💪
Galing nman.
Becareful Dorris not not flip the car forward!
WOW Beautiful and A awesome mechanic
Girl you work so hard and I must say you are sweet young lady.
Stunning Queen 🌹🔥🌶✌️
So, of the Cars present, the Viper, the Camaro or the Mustang, which do you prefer? 😊
Good call on the glasses lol
I love women that can work on car 5:58
Great video.
You're doing a great job Doris, learning as you go, as we all did. If I may make a request, please wear your safety glasses more often. You have very pretty eyes; we want nothing to happen to them.
Mustang probably came with a 8-in brand on it. Get rid of that. Put a 9-in at least. 👍
So is the camaro gonna b a daily or a track car????
Pretty girl and mechanic a keeper.😊
Doris that trunk floor is not that bad
Doris!! Are you going classic restore or modern restoration
Thumbnail titles are legendary....
Que buena parte trasera 😮❤
I can never look at the car lift the same ever again.
I sent you my email in another video you did.
Not enough 😊😊😮😢
And what’s on the lift?, the faded red Car?