Honda ACTY suspension hack! Modified shocks that fit! How to change rear shocks

Поділитися
Вставка
  • Опубліковано 31 сер 2023
  • Please subscribe to the channel so I can keep bringing you great content! It’s time I share a shock upgrade for the rear of the Honda Acty trucks and vans. These same shocks are hundreds of dollars from venders when you can modify and install them yourself for much cheaper.
    I’m still working on a solution for the front struts.
    Link to the rear shocks; amzn.to/3VKKmLU (amazon)
    #acty
  • Авто та транспорт

КОМЕНТАРІ • 38

  • @RefinedRedneck
    @RefinedRedneck 7 місяців тому +2

    I did this today following your video. Worked like a charm.

  • @FxckenRob
    @FxckenRob 10 місяців тому +3

    Bro thanks again for the shocks and quick response on the questions I had 🙏🏾

  • @JedKoll
    @JedKoll 3 місяці тому +1

    Thanks a ton. Had the back axles out to do cv boots and figured I’d upgrade the worn out shocks. Holy hell, what a difference! Wasn’t the easiest getting those beefy bastards in place, but compared to taking the axles out it was a breeze. Thanks again for the vid.

    • @JedKoll
      @JedKoll 3 місяці тому +2

      You have any recommendations for ungraded front struts/coilovers? Seems like most of the aftermarket stuff is designed for lowering, which I’m not looking to do.

    • @nicholasreif3443
      @nicholasreif3443 3 місяці тому

      Nice. Was debating these or Bilstein. Did this have a slight raise after the install?

    • @JedKoll
      @JedKoll 3 місяці тому

      Yeah I would say it’s slightly elevated. The vid doesn’t do the size of these things justice. When I opened the package I thought “no way in hell these big bastards will fit”.

  • @stavrosfloratos9791
    @stavrosfloratos9791 4 місяці тому +2

    Thank you for making the acty videos. Your timing belt, engine mount and carb videos have helped me a lot.
    A question - cost aside, what’s the benefit of installing these as opposed to a stock one? I know it’s larger, but how does that correspond to the ride of the van as compared to a stock replacement?
    Thank you

  • @julialister6765
    @julialister6765 8 місяців тому +2

    this is awesome, thank you so much. do you have any recommendations for the front?

    • @GhostSpeedShop
      @GhostSpeedShop  8 місяців тому

      Unfortunately Honda discontinued the fronts and I haven’t found a solution yet.

    • @DeadLuckArchives
      @DeadLuckArchives 7 місяців тому +1

      @@GhostSpeedShop I'm told Miata front coilovers fit, but of course there's a catch- you cut off the bolt part and slide the body of the cup into the part that goes around the shock. Then mark where the bolt would go through and grind out a path for that bolt. Once you've got that set up mark it off on the top and weld on a strip of metal above to further help prevent them sliding through.

    • @GhostSpeedShop
      @GhostSpeedShop  7 місяців тому

      @@DeadLuckArchivesI was told someone tried it, and for whatever reason it wouldn’t work. Have you seen it in person?

  • @nicholasreif3443
    @nicholasreif3443 3 дні тому

    I'm having the most difficult time getting the shock in place if the bottom bolt. Even tried jacking the shock up and malleting in place.

    • @GhostSpeedShop
      @GhostSpeedShop  3 дні тому

      Use a pick through the bolt hole on the opposite side of where you are placing the bolt in.

  • @thomasshavor8752
    @thomasshavor8752 3 місяці тому

    Hey Maverick- thanks for the advice! Any advice on what brand can replace the front struts?

  • @janisequintanilla2509
    @janisequintanilla2509 10 місяців тому +2

    Thank you for the video! question where did you get that exhaust tip?

  • @DeadLuckArchives
    @DeadLuckArchives 7 місяців тому +1

    Does this raise or lower it at all? I'm working towards lowering mine, I'll probably remove a single leaf rather than two.

    • @GhostSpeedShop
      @GhostSpeedShop  7 місяців тому +1

      It might raise it slightly at first depending on how much the rear weighs. Maybe .5-1 inch

    • @nicholasreif3443
      @nicholasreif3443 6 місяців тому +1

      I want mine raised anyways. Going to find one that has a higher weight rating.
      @@GhostSpeedShop

  • @GhOsTGALLeRY117
    @GhOsTGALLeRY117 5 місяців тому +1

    Anything for the front suspension that you recommend?? Need new front suspension

    • @GhostSpeedShop
      @GhostSpeedShop  5 місяців тому

      Most people swap to aftermarket springs, but there is no factory replacement front strut option.
      There are coilovers options out on the market though, I’ve heard good things about GAZ coilovers.

  • @christophercorbett7307
    @christophercorbett7307 8 місяців тому +2

    Will these work on the Honda ACTY trucks? Mine is an HA4

  • @marcelatenza308
    @marcelatenza308 3 місяці тому +1

    How's it going?
    Just wondering if you had the part number for front struts and assembly?
    Thanks alot!

    • @GhostSpeedShop
      @GhostSpeedShop  3 місяці тому

      In my video, I mention that you cannot buy the front struts. Honda no longer makes them.

    • @marcelatenza308
      @marcelatenza308 3 місяці тому +1

      What would be something comparable?
      I'm having a hard time finding parts and numbers out here in Hawaii.
      Anyway help would be appreciated

    • @GhostSpeedShop
      @GhostSpeedShop  3 місяці тому +1

      Might need to track down a set of Gaz coilovers to replace them.

  • @girthbrooks830
    @girthbrooks830 6 місяців тому +2

    How are these holding up?

  • @XXX-XX-X-X
    @XXX-XX-X-X 2 місяці тому

    Looking forward to my next bowel movement while installing these as one of my first car mods of my life.

    • @GhostSpeedShop
      @GhostSpeedShop  2 місяці тому

      ?

    • @XXX-XX-X-X
      @XXX-XX-X-X Місяць тому

      @@GhostSpeedShopSounds difficult. I’m saying it’s going to make me shit myself.