1995 Honda Acty 4WD 2 Inch Lift Kit FAIL

Поділитися
Вставка
  • Опубліковано 17 сер 2023
  • It would not work on this one. So I talked to the owner and he said just put it back together.
    Here is my store thegautomotiveandmorestore.pr...
    This video was made as a demonstration on how to repair things and should not be done with out the proper training and safety equipment. The G Automotive and More and Its affiliates are not responsible for any damage or personal injury. Please if you don't have the ability to do these demonstrations, don't try and get a professional to do it for you.
  • Авто та транспорт

КОМЕНТАРІ • 14

  • @woozleboy
    @woozleboy 2 місяці тому +1

    These kits are fine, but you do need to check the shackle bushings. Some have steel tube inserts, some have thicker bushings. You don't want to drill out the holes on the straps or you'll weaken them.
    Longer shocks are needed. Factory are commonly too short. If they have been changed in their lifetime, then they likely would be longer.
    It isn't a bad kit, but you needed some more parts to work with it.
    Worked fine on my 94 SDX 4WD.

    • @TRYHARDMG
      @TRYHARDMG 2 місяці тому +1

      What shocks would you recomend?

  • @letsride3041
    @letsride3041 8 місяців тому

    This same kit worked great on my 94 acty real-time 4wd

  • @ShriKaav
    @ShriKaav 2 місяці тому

    I watched a different video of a guy mounting it "correctly"?
    If it's wrong it still worked
    He mounted both strut plates underneath the cabin, then reamed out the hole in the cab to get a socket on the bolt.
    At the aft end he disconnected the shocks, put the spacers in, then slowly loaded the springs until the mounts for the shocks got back in.
    Anyway, I'm about to do all this to my acty, I'll see how messed up the cv joint is, but I think once the weight is back on the springs it'll mellow out

    • @TheGAutomotiveAndMore
      @TheGAutomotiveAndMore  2 місяці тому

      I was so worried about the rear CV joints being at the max angle. The owner did not want me to ream out the strut towers.

  • @davidmorris9204
    @davidmorris9204 10 місяців тому

    This lift kit will work perfectly with the mid engine models like Daihatsu, Mitsubishi and Suzuki...

  • @myfakeevo
    @myfakeevo 7 місяців тому +1

    If you got the muddy bottom kit. They come with new bushings

    • @myfakeevo
      @myfakeevo 7 місяців тому +1

      Also you do need to cut a slit into the Honda acty for the adjustment bolt. I can send a photo if you’d like

    • @nicholasreif3443
      @nicholasreif3443 7 місяців тому

      ​@@myfakeevosend for me ty

    • @joeroe2839
      @joeroe2839 6 місяців тому

      ​@@myfakeevoI wanna lift my 92 acty but idk what kit to get , some say just spacers some say spacers and spring n shocks 😢😢..would Like some info plz 🙏🏽

    • @myfakeevo
      @myfakeevo 6 місяців тому

      ⁠​⁠@@joeroe2839I went with muddy bottom. It stiffened everything right up. The only downside is it puts a lot more stress on the cv shafts. I personally think putting proper shocks and springs will lift the truck up a half inch. And maybe that’s good enough. I think getting just the spacers is a terrible idea cause the stock shocks and springs are awful.

  • @pikagamer3991
    @pikagamer3991 11 місяців тому

    UA-cam shows me goofy ah truck. Anyways I just pretend that know what you’re saying

  • @gcaurm
    @gcaurm 3 місяці тому

    dude you have to do more than just jack it up and talk about it lol

    • @TheGAutomotiveAndMore
      @TheGAutomotiveAndMore  3 місяці тому +2

      Here's another one that only watches1:00 minute of a video and then bitches.