Those old DeArmond GFs were wound with 44awg and tend to measure between 9.5k to 11k. The magnets were ferrite rubber like thick refrigerator magnets but a weaker ceramic does well. The magnets are actually touching the steel backing plate which makes the case around the windings function as part of the magnet. There were a couple versions with the magnets beside the coil. Some had pole peices to the side and others were in the middle. I have made a few and the first couple I didnt use a bobbin. I figured out how much I needed to go around the magnet and I soldered a wire to the start and wound it by hand. When it was when it was where I wanted it I wrapped the coil with white thread tape as a thin cover/barier from the metal and magnet. I dropped it in over the mag attached the last wire routed them and I used hot glue to guard and hold the pos and neg wires in place plus I added some hot glue in a couple places to hold it together kinda like potting I have also poured wax in them before to pot them but kind of liked them without the potting. Those old foils were always kinda microphones in the best kinda way. They always had 1 or 2 pieces of card stock under the foil separating the mag pole and coil from the foil and cover. I'm gad I'm not the only person who loved those enough to try to make them. That is awesome. That makes you a member of a small cult of gold foil guitar enthusiasts. I went so far I made made mini versions for a few mandolins so I could top mount them under the strings and but worry about the piezo sound etc. I had one I used a combination of neodymium disk mags and small square ceramic rods and let the magnet come out of the top cover and pluged in it sounded closer to the acoustic sound of a mandolin than any pickup on the market. Only a condesor mic could get it closer and it wasn't far apart. Rock on
Interesting. I'd like to try making my own, but being British, I only have access to pound notes. How do you think different currencies will change the tone of a guitar? Will Tone Currency (tm) affect the sound based on inflation?
At the moment, your pickup would have 0.81 of the sound of a dollar pickup which is pretty equal, but these are $2 pickups, so you might need to shove another pound note in there to get close. But I mean, what kind of tone are you looking for? Beatles or Beach Boys, y'know? Use the right currency for the right tone.
@@timsway Well, our paper currency starts at £5, so I've got some leeway built in. Mostly I build metal instruments, so maybe I should look into acquiring a store of Scandinavian notes, and such. For extra Metal points.
@@SirRawThunderMan I second this, but get some of the bigger budget notes, so you get a hotter output. whatever their equivalent of a $100 bill would be, ya dig.
I’m a metal guitarist and would have no use for these, but I’m 60 and understand the fun you’re having. As a kid, my first guitar in the late 60s was a Harmony. You did a great job creating those pickups 🤘
I made a similar pickup cover, but in a humbucker, with those open covers, and the leathery material from a book cover that was partially destroyed by termites. It was a book from the 19th century.
I thought the vinyl p90s (from one of your friends) were cool, your pallet nail pups were wild, & now you’re throwing money pups at us... truly you’re a mad man! They’re all great, I gotta get some of these on a build!
for the record, the vinyl p90s was my idea, that was just before I was winding them myself :-p I still really like vinyl top look and plan on doing more with that.
Yours definitely has similar sound characteristics to the original gold foils on the Harmony. And I like the mellower sound compared to the standard single coils. But I also really like jazz guitar, so maybe I'm just drawn to the clean sound. Anyway, another fun experiment that looks pretty dang cool. Thanks for sharing!
Well done Tim! Those 2$ bill pickups really sound great! Your innovative guitar building skills just keep expanding and getting better all the time. Keep it up.... 👍👍🎸🎸👏👏
Dig the clarity of yours! Nice work. What if you cut the bobbin in half, put in two of them and reverse wound one of them? You'd have a noise-cancelling humbucker inside a gold-foil! Might be cool.
Bowden tubes(bicycle cables) to a wah pedal to slide pickups around maybe. Like instead of the B-shift spring gizmo a while back(sry, I keep thinking on that, heh heh.) Gotta love the unique sound from these man!
I love gold foils. I have one in a custom build and have been dying to build some myself. I think some models have ferrite rubber magnets outside the coil. They made these things all sorts of ways.
@@timsway A lot of the time, modern "rubber" magnets are made with neodymium dust, so you could actually do both at the same time and truly reinvent this kind of pickup for modern times.
I looked up new prospectives music and nudoling for a DeArmond like $2 dollar pickup is $90 nudolings and is more than I can afford at this time. I am building about 10 different kinds of electric guitars. One is an archtop I'm making a neck for a laminate body made in China with a nice maple veneer top. I bought some gold fillers or TV pickups? I fix up a Harmony thin hollow body simular to a 330 hollow body like Epiphone's or Gibson's with (you can guess this) DeArmond pickups I fixed up for my neighbor's guitar and I'm making a film documentary over 2 kinds of tests. One is the different kinds of clean to dirty tones between 6L6's used on a 40 watt Fender Hot Rod Deluxe Mod 3 and a Bugera 50 watt T-50 with it's use of EL34's. Second is more close and dear to my heart is difference in sound over a Celestion 80 watt speaker that came with the Fender over my homemade custom cabinets I built using D123e 12"inch JBL. I can already tell you the Celestion doesn't win. The reason I decided to do this is when I was a teen my dad bought me a Fender Twin Reverb in 74 with Altec Lancing's in them instead of Jensen's or (the recommended upgrade) JBL's. After 30 years later I finally heard from another music person that the speakers were the problem and not the amps fault. I really lost it and made it my mission to teach others to never make this mistake ever again. I bought 3 D123e JBL's and 2 - 2130 JBL's and in 2014 had the speakers cleaned up reconditioned (except for one 2130) and placed them in my cabinets. Between the tools, wood, accessories, electronics, pickups and speakers I spent everything to make and sale homemade equipment for different kinds of guitars. I'm in a position that I need to sell some of my equipment (2 - 5-string fretless bass) a Micheal Kelly and a Dean-Pace fretless on a stick bass to regain back assets to operate with some cash again. That's if I wish to do any nudoling again. I like your site and I admire the stuff you're making. Thank you for your efforts in making guitars! Bye - oh I all most forgot I have pictures of the bodies of my work at this time. Now bye.
SWEET! You should make and sell some P90 covers like that. I would buy several and I'm sure a butt ton of people would too. P90's are making a HUGE comeback. I'd grab some of those $2 open covers too! I'm a broke, disabled vet so I can't afford entire pickups. LOL.
Tim I thought the way this came out was great , love the Gold Foil pups As far as guitars only one I have left is a 1990 Gold Top Reissue, 1956 LP M.S. has basically stopped/ slowed guitar playing. Playing bass is what I do now onstage , was a bassist first then started doing lead guitar because of the spot light , bass is not covered well by the spot lights even if your a Enwhistle , I am not but he was an influence. But Love what you do If I had money would Love to have you make a bass , pups for it , idea for you anyway bass pups Great Job Always
I think that your pickup has a better attack/transient. Oh and what’s that interesting instrument at 8:37 (and forward)? Looks like a six-stringed bass but sounds like a guitar too. I really like that! Thanks for another great video! Music *and* woodworking/making… can it be better? :)
I see your really getting into the pickup winding. That’s so cool. Makes we want to start winding some more myself! I had someone ask me about the gold foils and if that winder could make them. I guess I’ll be pointing him to your success. Great sound out of cereal box flatware - who knew?? Thanks for the info on the people who cut the covers.
Your pickup would darken a bit if you had it hooked with volume and tone pot, but still not enough to match original pickups. Not that there's anything wrong with them being different, but I personally would prefer just a little bit more meat on them bones :)
indeed. I didn't get in to that but yea, they're always a little crispier direct than through a pot or two. I think I can get a little more out of them next batch with a few minor changes, too.
as long as you use less than 50% of the bill in each pickup, and given you only use one bill in each pickup, ostensibly you could go to a bank and have the other parts of the bills exchanged for fungible currency
hmmm using a acoustic guitarbody as a speakercabinet might actually improve the sound of the speaker used , as the top of the guitar is a big soundboard , wonder if it amplifies certain frequencies though bilfold idea is fun , looks like you can actually roll the bill up around the coil and still have it fit inside the metal case been folowing a builder of guitarpickups and he mentioned that theres a difference in tone between alnico and neomedium magnets , the latter having a lot more high in the tone he allso experimented with a copper sheet between the magnet and poles and that changed the tone dramaticly filtered out a lot of highs , if you still have one that is unused or can still pry one open you might try one that has the magnet packaged in copper foil before putting it intoo the bobbin and see if that changes the sound
You should be able to get fairly thin copper sheets and use those instead of the tape, as you can polish them and they won't show folds either. Now you just need to find an artist called, "penny" to give it to!!! The copper will start to weather naturally due to the oils and acids from the hands, when being played.
The foil pickups with the copper tape, did they have a smidge of a tele sound? Tele bridge pickups have that copper or steel plate on the bottom to alter the magnetic field. I was just curious if the copper tape might do something similar.
I think there's so much metal in them they sound similar (between the $2 and Penny) and that copper top doesn't make too much of a difference. But in theory, yea, a metal top would alter the field vs a paper one.
That's a really cool looking pickup design. They sound great too! The cereal boxes remind me: Ever since you sent me your "business" card" - which was a rubber stamped piece of cereal box - 6 or 7 years ago, I've been saving and using every clean cereal and similar product box for reuse. I actually use them at least 4 times a week when cooking dinner. The un-printed side works great to set my air frying basket on (keeps the glass stove top crumb and grease-free), then I throw the chipboard away after use. The boxes also come in handy for various shop uses as well. Your reuse habits rubbed off on me and have saved me tons of money and cleanup time!
Funny you built those pickups. I have been looking at the new Rhythm Chief reissues and found out they are not that well built. I was thinking of winding my own but I have my hands full. If your interested in making some low Z low profile pickups that would fit in a Selmer style flattop there is a market for it. Your well positioned to cater to a niche market like that. You could use the neo magnets and maybe the Mu metal in laptop hard drives. Keep up the good work!
I'm working on another universal, surface mount that will be a little less expensive than these and should cover most existing holes rather than fit in them. stay tuned! I hope to have the video out and a few in my store this weekend
My 1st, what I consider my 1st real Guitar was, is a Gibson E-137 copy done by, Aria...$160.00, USD. I'd kill over it...lol...Oh I had to put P-90z on er;, She;s warm, She has a nice Round Ring like a Mellow, Bell. You're Harmony is a Beauty.
Amazing, Sir. This first guitar have a sound well controled. Perfect to jazz e things like that. Blues, rockabilly, brazilian music, soft rock. And the shape this second one, stunning. Why do you use this dolars on caps. I'ts just a ornament? ha. By the way, you is amazing "Gyro Gearloose". Nice engenieer knowledge. 👏
I kinda wanna make some pickups now. I have a squire that I wanna mess around with. I wanted to do a copper and walnut theme for a long time, do they cut copper there?
😁cool!.... i gotta try that.... hmmmmmmm...... i like the case concept more than screws n pins|nails.... got a couple of accoustics with unique sound i wanna loop on a electric.pedal... i was looking to buy a conv.kit but i like to tinker...lol... making my own seems like fun actually, thanks.
in this batch i used neodymium. I had bought some ceramic magnets to use but the polarity was the wring direction (long way instead of flat way) so they didn't work quite right
Super cool video. Those pick ups are rad. So money! Yasss, can see how surface mount opens up other design possibilities. Instead of $2 bill use cryptocurrency or NFT as a joke. Mahalo for sharing! : )
Something tells me if these take off there will be a new “tone wood” style debate on which bill sounds best…… until a week or two later the confirmation bias consensus becomes $100 bills or whatever is the highest denomination available to consumers.
dude you need to at least sell the idea of your modifiable pickups and you may even be able to get some sort of blank for diffrent body and neck wood combos. it could be a very affordable fot the person buying it to as expensive as someone may want, think the build yourself computer buisneses. id buy that i can say that at the very least
Love that Harmony Meteor - what a cool guitar! and the new pickups sound fine. I've always believed in getting a clean sound first and then distorting it later!
Hey Tim, has anyone told you that you look exactly like Graham Chapman from Monty Python? I’m sure someone must have. It’s uncanny. BTW I enjoy your videos. I’m a guitar and pickup maker myself.
Those gold foils are the worst pickups I ever heard. Way too much mud, and once that harmonic richness and separation is lost, you can never get it back. Your home brews are way better, and if you want a jazz sound you can always roll off the treble.
I recently got approval for full benefits for my chronic fatigue/autism related stuff. I wouldn't mind some of that going to a craftsman and small business owner.
Just wanted to say thanks for all the great videos! You are an inspiration! I'm currently embarking on building my left-handed Edwards E-Chunpa-V 🤘 Here's the right handed one in action!! ua-cam.com/video/zMzGo0lAT1I/v-deo.html
@@timsway No but I've owned and kept in tune many instruments with low quality or problematic tuners and bridges. It just takes that little bit of extra effort dude and you end up with an instrument that actually sounds in tune when playing chords. There's no excuse really
I never thought of that, making kits... Interesting idea. I am slowly trying to revamp and expand my parts/kits supply (perhaps even some cnc plans I'll share)...
Those old DeArmond GFs were wound with 44awg and tend to measure between 9.5k to 11k. The magnets were ferrite rubber like thick refrigerator magnets but a weaker ceramic does well. The magnets are actually touching the steel backing plate which makes the case around the windings function as part of the magnet. There were a couple versions with the magnets beside the coil. Some had pole peices to the side and others were in the middle. I have made a few and the first couple I didnt use a bobbin. I figured out how much I needed to go around the magnet and I soldered a wire to the start and wound it by hand. When it was when it was where I wanted it I wrapped the coil with white thread tape as a thin cover/barier from the metal and magnet. I dropped it in over the mag attached the last wire routed them and I used hot glue to guard and hold the pos and neg wires in place plus I added some hot glue in a couple places to hold it together kinda like potting I have also poured wax in them before to pot them but kind of liked them without the potting. Those old foils were always kinda microphones in the best kinda way. They always had 1 or 2 pieces of card stock under the foil separating the mag pole and coil from the foil and cover. I'm gad I'm not the only person who loved those enough to try to make them. That is awesome. That makes you a member of a small cult of gold foil guitar enthusiasts. I went so far I made made mini versions for a few mandolins so I could top mount them under the strings and but worry about the piezo sound etc. I had one I used a combination of neodymium disk mags and small square ceramic rods and let the magnet come out of the top cover and pluged in it sounded closer to the acoustic sound of a mandolin than any pickup on the market. Only a condesor mic could get it closer and it wasn't far apart. Rock on
Interesting. I'd like to try making my own, but being British, I only have access to pound notes. How do you think different currencies will change the tone of a guitar? Will Tone Currency (tm) affect the sound based on inflation?
At the moment, your pickup would have 0.81 of the sound of a dollar pickup which is pretty equal, but these are $2 pickups, so you might need to shove another pound note in there to get close. But I mean, what kind of tone are you looking for? Beatles or Beach Boys, y'know? Use the right currency for the right tone.
@@timsway Well, our paper currency starts at £5, so I've got some leeway built in. Mostly I build metal instruments, so maybe I should look into acquiring a store of Scandinavian notes, and such. For extra Metal points.
@@SirRawThunderMan I second this, but get some of the bigger budget notes, so you get a hotter output. whatever their equivalent of a $100 bill would be, ya dig.
Well I don't know what "tone" is but the toan will def be different from a pound note. It will sound more like a vox most def.
us money has lil metal bar reader strips I'm it we could identify stollen notes from space
I’m a metal guitarist and would have no use for these, but I’m 60 and understand the fun you’re having. As a kid, my first guitar in the late 60s was a Harmony. You did a great job creating those pickups 🤘
I made a similar pickup cover, but in a humbucker, with those open covers, and the leathery material from a book cover that was partially destroyed by termites. It was a book from the 19th century.
love it!
I thought the vinyl p90s (from one of your friends) were cool, your pallet nail pups were wild, & now you’re throwing money pups at us... truly you’re a mad man! They’re all great, I gotta get some of these on a build!
for the record, the vinyl p90s was my idea, that was just before I was winding them myself :-p I still really like vinyl top look and plan on doing more with that.
Yours definitely has similar sound characteristics to the original gold foils on the Harmony. And I like the mellower sound compared to the standard single coils. But I also really like jazz guitar, so maybe I'm just drawn to the clean sound. Anyway, another fun experiment that looks pretty dang cool. Thanks for sharing!
Thank you Tim. I always enjoy seeing what you come up with.
Thinking about trying this for a mandolin build… every time you post a video, I get another idea for a build I need to do.
Well done Tim! Those 2$ bill pickups really sound great! Your innovative guitar building skills just keep expanding and getting better all the time. Keep it up.... 👍👍🎸🎸👏👏
thanks man
Completely awesome! I think the tele pup and yours together sounded the best (really balanced). As always, nice work!
Enjoying the video so far , txs for the fun 😉
I have a Harmony H72 (similar to yours, but with double cut and 6 inline tuners. I love the funky old sound of the gold foils.
they are fun guitars. I have a couple of them.
I kinda want to put 3 of them on my rickenbacker clone I built...
I love your videos and ideas, but every time my project list grows!
As usual, your work is super inspiring. Don't ever stop.
That is such a cool idea! Super modular and open to customization with different top materials. Great work Tim, I dig the sound and aesthetic!
Dig the clarity of yours! Nice work. What if you cut the bobbin in half, put in two of them and reverse wound one of them? You'd have a noise-cancelling humbucker inside a gold-foil! Might be cool.
Bowden tubes(bicycle cables) to a wah pedal to slide pickups around maybe. Like instead of the B-shift spring gizmo a while back(sry, I keep thinking on that, heh heh.)
Gotta love the unique sound from these man!
Hi Tim!
I'm re-watching this to try it myself, but I noticed your guitar body amp, I love it! Think I'll try that with a freebie.
I love gold foils. I have one in a custom build and have been dying to build some myself. I think some models have ferrite rubber magnets outside the coil. They made these things all sorts of ways.
You could try using a neodymium magnet to get more output. Just be VERY careful with those things if you try that route.
He did that with the sliding pickup proof-of-concept build a few weeks ago
No need, if he uses 44guage wire, like the originals, he'll get similar output and it will be slightly warmer sounding too.
I am using a neodymium pickup in this one, too.
@@timsway A lot of the time, modern "rubber" magnets are made with neodymium dust, so you could actually do both at the same time and truly reinvent this kind of pickup for modern times.
@@timsway oh, I thought it was alnico! Nevermind then!
Ordered one and super excited!
I've got a Teisco ET-200 and while it might not be the most comfortable its pickups are great
man!!!! my tiny hands would love playing this. ive never heard anything that sounds like it :-)! what a great piece
yea, the necks on a lot of that old stuff are narrow. you can still find deals on these types of thjings if you look hard.
Wow! Just the right kind of dirty and retro I really like!
I looked up new prospectives music and nudoling for a DeArmond like $2 dollar pickup is $90 nudolings and is more than I can afford at this time. I am building about 10 different kinds of electric guitars. One is an archtop I'm making a neck for a laminate body made in China with a nice maple veneer top. I bought some gold fillers or TV pickups? I fix up a Harmony thin hollow body simular to a 330 hollow body like Epiphone's or Gibson's with (you can guess this) DeArmond pickups I fixed up for my neighbor's guitar and I'm making a film documentary over 2 kinds of tests. One is the different kinds of clean to dirty tones between 6L6's used on a 40 watt Fender Hot Rod Deluxe Mod 3 and a Bugera 50 watt T-50 with it's use of EL34's. Second is more close and dear to my heart is difference in sound over a Celestion 80 watt speaker that came with the Fender over my homemade custom cabinets I built using D123e 12"inch JBL. I can already tell you the Celestion doesn't win. The reason I decided to do this is when I was a teen my dad bought me a Fender Twin Reverb in 74 with Altec Lancing's in them instead of Jensen's or (the recommended upgrade) JBL's. After 30 years later I finally heard from another music person that the speakers were the problem and not the amps fault. I really lost it and made it my mission to teach others to never make this mistake ever again. I bought 3 D123e JBL's and 2 - 2130 JBL's and in 2014 had the speakers cleaned up reconditioned (except for one 2130) and placed them in my cabinets. Between the tools, wood, accessories, electronics, pickups and speakers I spent everything to make and sale homemade equipment for different kinds of guitars. I'm in a position that I need to sell some of my equipment (2 - 5-string fretless bass) a Micheal Kelly and a Dean-Pace fretless on a stick bass to regain back assets to operate with some cash again. That's if I wish to do any nudoling again. I like your site and I admire the stuff you're making. Thank you for your efforts in making guitars! Bye - oh I all most forgot I have pictures of the bodies of my work at this time. Now bye.
I really love your raw guitar design. Might have to get one sometime!
SWEET! You should make and sell some P90 covers like that. I would buy several and I'm sure a butt ton of people would too. P90's are making a HUGE comeback. I'd grab some of those $2 open covers too! I'm a broke, disabled vet so I can't afford entire pickups. LOL.
Tim I thought the way this came out was great , love the Gold Foil pups
As far as guitars only one I have left is a 1990 Gold Top Reissue, 1956 LP
M.S. has basically stopped/ slowed guitar playing.
Playing bass is what I do now onstage , was a bassist first then started doing lead guitar because of the spot light , bass is not covered well by the spot lights even if your a Enwhistle , I am not but he was an influence.
But Love what you do
If I had money would Love to have you make a bass , pups for it , idea for you anyway bass pups
Great Job Always
I think that your pickup has a better attack/transient.
Oh and what’s that interesting instrument at 8:37 (and forward)? Looks like a six-stringed bass but sounds like a guitar too. I really like that!
Thanks for another great video! Music *and* woodworking/making… can it be better? :)
that is a bass vi: ua-cam.com/video/jxj9btPUEr0/v-deo.html
Will each of those pickups be ascribed a cereal number? :0/
punny
oh man the knobs on that guitar... 2:11
I'm guessing the tone and volume are wide open to simulate your direct pickup input ? This is interesting and I enjoy it !
yes. even wide open, the pots do effect the tone a little. Direct wiring to the pickup is always a little crispier.
Love this, great delivery and editing. Genius video, subscribed!
They sound great Tim look pretty sweet too
I know a pickup maker named Brubaker who makes great copies of these pickups for a great price.
I see your really getting into the pickup winding. That’s so cool. Makes we want to start winding some more myself! I had someone ask me about the gold foils and if that winder could make them. I guess I’ll be pointing him to your success. Great sound out of cereal box flatware - who knew?? Thanks for the info on the people who cut the covers.
yea, I'm real in to it. another design coming out this weekend!
Zinc solder. 950f and wets steel, Nickel, copper and aluminum.
Your pickup would darken a bit if you had it hooked with volume and tone pot, but still not enough to match original pickups. Not that there's anything wrong with them being different, but I personally would prefer just a little bit more meat on them bones :)
indeed. I didn't get in to that but yea, they're always a little crispier direct than through a pot or two. I think I can get a little more out of them next batch with a few minor changes, too.
as long as you use less than 50% of the bill in each pickup, and given you only use one bill in each pickup, ostensibly you could go to a bank and have the other parts of the bills exchanged for fungible currency
legal tender, baby! :)
Cool channel Tim!!
Just noticed…..
Guitar body as an amp?
Brilliant!!!
Love it!!! 😂
here's the video about that amp: ua-cam.com/video/LRXXSdpd42U/v-deo.html
hmmm using a acoustic guitarbody as a speakercabinet might actually improve the sound of the speaker used , as the top of the guitar is a big soundboard , wonder if it amplifies certain frequencies though
bilfold idea is fun , looks like you can actually roll the bill up around the coil and still have it fit inside the metal case
been folowing a builder of guitarpickups and he mentioned that theres a difference in tone between alnico and neomedium magnets , the latter having a lot more high in the tone
he allso experimented with a copper sheet between the magnet and poles and that changed the tone dramaticly filtered out a lot of highs , if you still have one that is unused or can still pry one open you might try one that has the magnet packaged in copper foil before putting it intoo the bobbin and see if that changes the sound
You should be able to get fairly thin copper sheets and use those instead of the tape, as you can polish them and they won't show folds either. Now you just need to find an artist called, "penny" to give it to!!! The copper will start to weather naturally due to the oils and acids from the hands, when being played.
I think you should make the pickups with the cereal box mascots / names exposed on top and call them the "cereal offender pickup"
love it
I like the dollar bill consept! Maybe cut out from tin cans could work too.
Instead of goldfoil. Tunafish or whatever.
tuna/sardine/catfood cans were part of the brainstorm...
Baked beans, corned beef pickups.
Great Job!
For the penny pickup, maybe you could try sanding a bunch of them down so they're thin and then making a pattern with them.
The foil pickups with the copper tape, did they have a smidge of a tele sound? Tele bridge pickups have that copper or steel plate on the bottom to alter the magnetic field. I was just curious if the copper tape might do something similar.
I think there's so much metal in them they sound similar (between the $2 and Penny) and that copper top doesn't make too much of a difference. But in theory, yea, a metal top would alter the field vs a paper one.
That's a really cool looking pickup design. They sound great too! The cereal boxes remind me: Ever since you sent me your "business" card" - which was a rubber stamped piece of cereal box - 6 or 7 years ago, I've been saving and using every clean cereal and similar product box for reuse. I actually use them at least 4 times a week when cooking dinner. The un-printed side works great to set my air frying basket on (keeps the glass stove top crumb and grease-free), then I throw the chipboard away after use.
The boxes also come in handy for various shop uses as well. Your reuse habits rubbed off on me and have saved me tons of money and cleanup time!
they are handy things. glad to hear I've influenced you :)
Funny you built those pickups. I have been looking at the new Rhythm Chief reissues and found out they are not that well built. I was thinking of winding my own but I have my hands full. If your interested in making some low Z low profile pickups that would fit in a Selmer style flattop there is a market for it. Your well positioned to cater to a niche market like that. You could use the neo magnets and maybe the Mu metal in laptop hard drives. Keep up the good work!
I'm working on another universal, surface mount that will be a little less expensive than these and should cover most existing holes rather than fit in them. stay tuned! I hope to have the video out and a few in my store this weekend
My 1st, what I consider my 1st real Guitar was, is a Gibson E-137 copy done by, Aria...$160.00, USD. I'd kill over it...lol...Oh I had to put P-90z on er;, She;s warm, She has a nice Round Ring like a Mellow, Bell. You're Harmony is a Beauty.
Always fun and cool gear
Amazing, Sir. This first guitar have a sound well controled. Perfect to jazz e things like that. Blues, rockabilly, brazilian music, soft rock. And the shape this second one, stunning. Why do you use this dolars on caps. I'ts just a ornament? ha. By the way, you is amazing "Gyro Gearloose". Nice engenieer knowledge. 👏
Just an ornament and a pun: instead of "goldfoil" I used currency
@@timsway Ahhhh Gotcha! Haha. Great!
The $2 version definitely looks much better than the 1 penny version.
yea, I'm not doing the pennies any more, I improved the look of the $2 bill, too.
Really hit the gold foil genre feel, look and sound. I liked the penny look but agree with offset placement under the cover would look better.
or maybe two pennies? Or design a cover specific to the penny?
Love her I'm so glad you didn't mess with her!
I love that amp.
ua-cam.com/video/LRXXSdpd42U/v-deo.html
Now THIS is interesting
I kinda wanna make some pickups now. I have a squire that I wanna mess around with. I wanted to do a copper and walnut theme for a long time, do they cut copper there?
i believe so
Killer..love the 2$ idea
Love your channel.
thanks!
😁cool!.... i gotta try that.... hmmmmmmm...... i like the case concept more than screws n pins|nails.... got a couple of accoustics with unique sound i wanna loop on a electric.pedal... i was looking to buy a conv.kit but i like to tinker...lol... making my own seems like fun actually, thanks.
Hey Tim really nice pickups, i just wanted to ask, what type of magnets you're using for them?
in this batch i used neodymium. I had bought some ceramic magnets to use but the polarity was the wring direction (long way instead of flat way) so they didn't work quite right
I was wondering that too. Are the poles the edges or the faces?
where can I find your amp/guitar build ? Very Kool thanks
ua-cam.com/video/LRXXSdpd42U/v-deo.html !
Excellent. Congratulations for your video.
What gauge is the wire? How many laps does the pickup have?
Thanks for your help.
these pickups are about 5000 winds of 44ga and 5.9k ish
@@timsway Thanks a lot
Fun is your way....The Fun Way
Super cool video. Those pick ups are rad. So money! Yasss, can see how surface mount opens up other design possibilities. Instead of $2 bill use cryptocurrency or NFT as a joke. Mahalo for sharing! : )
NFT. lol. There might be a fun pun in there...
Something tells me if these take off there will be a new “tone wood” style debate on which bill sounds best…… until a week or two later the confirmation bias consensus becomes $100 bills or whatever is the highest denomination available to consumers.
It's only a matter of time...
Really impressive!
genius
Good try on this pu... Really interesting design.
Really cool, love it.
Like deployed 👍
Very neat stuff. I appreciate the scientific spirit. Just goes to prove that guitar pickups aren't magic.
dude you need to at least sell the idea of your modifiable pickups and you may even be able to get some sort of blank for diffrent body and neck wood combos. it could be a very affordable fot the person buying it to as expensive as someone may want, think the build yourself computer buisneses. id buy that i can say that at the very least
Wonderful., wonderful, wonderful
Cool amp in a guitar body
there's a video :) ua-cam.com/video/LRXXSdpd42U/v-deo.html
Tim do you custom work?
Yes, that is mostly what I do. newperspectivesmusic.com
@@timsway Thanks. I emailed you.
Ya I loved the amp ,a lot more then the guitar he’s playing. Thing just looks right
Love that Harmony Meteor - what a cool guitar! and the new pickups sound fine. I've always believed in getting a clean sound first and then distorting it later!
right. it's easier to make clean dirty than dirty clean
it loves distortion.
i think the difference in sound is because of the lack of eletronics
big part of it for sure
Hey Tim, has anyone told you that you look exactly like Graham Chapman from Monty Python? I’m sure someone must have. It’s uncanny.
BTW I enjoy your videos. I’m a guitar and pickup maker myself.
I've heard a few but that one is a first.
I'll bet different magnets = different sound......alnico rules!
Guitar Porn,...Wait, Don't Tell Anyone, This Is the 1960, Harmony, Meteor...I rewound to hear n c that 7 Freakin' times...thanx Tim.
What is the scale length? Looks short.
I don't remember exactly, either 24.75 or 25. Gibson ish
billfold pickups.
Lmao the "guitar" amp
there's a video for that: ua-cam.com/video/LRXXSdpd42U/v-deo.html
Utterly amazing....trashy in a please take my money kinda way
Lol. I do sell them at newperspectivesmusic.com :)
Those gold foils are the worst pickups I ever heard. Way too much mud, and once that harmonic richness and separation is lost, you can never get it back. Your home brews are way better, and if you want a jazz sound you can always roll off the treble.
I should send you some 5 euro bills :P
too rich for my blood
I recently got approval for full benefits for my chronic fatigue/autism related stuff. I wouldn't mind some of that going to a craftsman and small business owner.
Just wanted to say thanks for all the great videos! You are an inspiration! I'm currently embarking on building my left-handed Edwards E-Chunpa-V 🤘
Here's the right handed one in action!!
ua-cam.com/video/zMzGo0lAT1I/v-deo.html
A two dollar bill is no different than a one dollar bill.
No. it's worth twice as much. To quote Nigel Tufnel, "It's one louder, innit?" :)
haha
dude this is really interesting but PLEASE makes sure you tune your damn guitar... It's painful to hear it so out of tune, ruins the video for me.
have you ever tried tuning a 1960 Harmony? LOL
@@timsway No but I've owned and kept in tune many instruments with low quality or problematic tuners and bridges. It just takes that little bit of extra effort dude and you end up with an instrument that actually sounds in tune when playing chords. There's no excuse really
@@Tasmanaut you're probably not going to want to watch too many more of my videos. I like a little extra sonic tension :)
5 seconds, clickbait detected, failure to get on with it detected. Foul odor detected. Just Get OUT!
everything that game make just sounds like utter garbage...
No sound no good .
fun pickups
personally i'm quite a fan of lipstick pickups
Awesome. I always loved these and the old Kay speedbumps. Nice job
I'd love to see a kit/parts for these thinner style pickups! Really cool tim!
I never thought of that, making kits... Interesting idea. I am slowly trying to revamp and expand my parts/kits supply (perhaps even some cnc plans I'll share)...
@@timsway exciting!