Yes, definitely a difference compared to Permanon. At the end that little area that I had covered I misted with Permanon to test side by side. I have some pictures of the beading 50/50 the next day and the HydrO2 beads are much smaller and tighter. More importantly within less than two weeks the Permanon side was no longer sheeting. Hydro sheets fast for about a month and then still beads great but starts to sheet a bit slower. I'm at about 2 months now since application
Good day mate! I think theoretically the surface being smoother that makes sense how even it would be on a level so minute I doubt it could be measured
Hello, I applied the Ceramic Pro coat in my car. Can this product be used to increase the durability of the coat or are they incompatible? And what about Reload?
Yes, Hydro2 it will help the durability of Ceramic Pr greatly. Yes, Reload, Reset, and Iron X are VERY much recommended - they will really improve the performance of that coating.
It is better not to apply it on wax. It needs to bond to the paint and an oily wax type product will likely cause streaks when Hydro2 is applied on top of it
How much product, of the HydrO2, in ml, do you use on a car like this? 100ml? (with water that would make 400ml?) Or less? Looks like a great product. I just ordered it. Can't wait to try it out!
ok so the first time you can do like the video and than evrey week whan its get dirty what should I need to clean the car ..? just use powerwash only or what ? thanks :)
+Leander Duca You would wash the car as normal. No wax needed but you should always still wash your car every week or two for best care. Get some CarPro Reset for regular wash and your golden
It is not the best combo imo Jack! You COULD but wait a day for the Hydro2 to cure first. Personally I would use one or the other. Hydrofoam is a good topper for Hydro2 though
HOLLY COW I needed this 6 months ago. Thank you! this explains exactly why I had such a hard time !
Yes, definitely a difference compared to Permanon. At the end that little area that I had covered I misted with Permanon to test side by side. I have some pictures of the beading 50/50 the next day and the HydrO2 beads are much smaller and tighter. More importantly within less than two weeks the Permanon side was no longer sheeting. Hydro sheets fast for about a month and then still beads great but starts to sheet a bit slower. I'm at about 2 months now since application
Good day mate! I think theoretically the surface being smoother that makes sense how even it would be on a level so minute I doubt it could be measured
after watching this video im going to invest into this product ,the hydrophobic water action is crazy on this
awesome demonstration ....can you ad this to a car that has ceramic on it
6:18 and onward is the best bit.
No question, thats when the magic really happens
Lol!
Thanks buddy! I hope your doing great over there my friend!
I am confused whether reload should be top coat on ceramic coated car or hydro lite
so strong "regular" hose water pressure recommended over power washer/pressure washer?
Correct
How can you remove superhydrophobic coating? ...do you have any solutions?
Hello, I applied the Ceramic Pro coat in my car.
Can this product be used to increase the durability of the coat or are they incompatible?
And what about Reload?
JaozinnBR reload will work with ceramic pro but hydro tends not to based on a few tests.
Yes, Hydro2 it will help the durability of Ceramic Pr greatly. Yes, Reload, Reset, and Iron X are VERY much recommended - they will really improve the performance of that coating.
Can it overlap with CQUK 3.0 in the base layer?
How does this compare to using something like Reload?
Шикарно!
Can you apply this after using a regular/traditional paste wax like a canuba wax for extra protection? Or is this not compatible with waxes?
It is better not to apply it on wax. It needs to bond to the paint and an oily wax type product will likely cause streaks when Hydro2 is applied on top of it
How much product, of the HydrO2, in ml, do you use on a car like this? 100ml? (with water that would make 400ml?) Or less?
Looks like a great product. I just ordered it. Can't wait to try it out!
1:7
Impressionnant
Great job on the video
-Hamza
Seeing is Believing !!...
I have a PPF on the whole front end and rocker panels any concerns using HydrO2?
PPF is not a problem - works great there as well when used correctly.
Hey mate, do you think these kinda products when applied reduce the drag (air resistance) of a car, since it makes the surface more slippery?
Thanks.
It defenitely reduces your brain ability to process things
Which one last longer? HydrO2 or Reload?
It depends on the environment. Hydro2 usually
Nice car
It's like a full car rainex
I LIKE IT ;-)
How long does it lasts?
It's rated at 1-3 months per the bottle but most have been getting more than 3 months out of it.
***** It is HIGHLY chemical resistant. Even strong auto washes have zero negative affect on it.
Mine lasts through car washes but I don't go through big chain car washes.
Can you use this on top of CQuartz?
Yes, after a week or longer you can
Yes, but we prefer Reload or Hydrofoam on top of CQuartz
Good vid cee dog
Get yourself a Kwaszer bottle when doing this next time👍
But your car was already beading water before the application. You should have stripped the car from all coatings before you applied this one.
What is that nozzle on your hose?? @ceedog
Hi Greg, its the Nelson Fire Hose nozzle from amazon
ok so the first time you can do like the video and than evrey week whan its get dirty what should I need to clean the car ..? just use powerwash only or what ? thanks :)
+Leander Duca You would wash the car as normal. No wax needed but you should always still wash your car every week or two for best care. Get some CarPro Reset for regular wash and your golden
Can you use reload on top of this CEE DOG
It is not the best combo imo Jack! You COULD but wait a day for the Hydro2 to cure first. Personally I would use one or the other. Hydrofoam is a good topper for Hydro2 though
You should spray your whole garage
not on the brakes!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+Tyger Detailing the first millisecond of the brakes engaging removes the sealant. Thanks for your concern though ;)
Skys the Limit Car Care Webshop personal experience man, the heat of the friction make the hydr02 and any other coating glassify on the brake pads
+Tyger Detailing no it doesn't
brakes need a layer of WD40 after washing to prevent that layer of rust after washing.
3-6 Months
You used a lot of product there
interesting
Ugh I hate those water nozzles...
What's with the music? None is better
Zzskah zzskah zzskah.....zzskah zzskah
How can you remove superhydrophobic coating? ...do you have any solutions?
That depends on the coating. If it is CQuartz then you would compound it to remove it.
Nice car
How can you remove superhydrophobic coating? ...do you have any solutions?
by polishing only