Mike, I'm glad I found your channel on bending conduit. You make it easier to understand how to bend conduit is multiple situations. I run a handyman business and I've always just went by the seat of my pants for saddle and offset bends. I once had an electrician say, " Don't worry about it, that's why they make couplings" LOL I look forward to using my newly learned talent on today's jobsite.
I will be letting more videos go in the next few weeks. More Bending and electrical stuff. Thanks for watching and commenting and I am glad this is helping you ☺
I'm happy to hear that has helped you. I'm working on some more conduit Bending videos. They should be up soon I hope 🤞. I will do one on shrinkage for sure thanks for watching and commenting ☺
You know for 3/4 and have never used measurements I used my finger trick which seemed to work really good. Once you get the hang of it. I don't want to lie to you and tell you that absolutely that measurement will eken, but now I'm gonna have to try it out for sure.
Well I appreciate that comment alot. I am sorry to hear that you had a bad teacher ...I will be adding more bending videos this upcoming winter so stay tuned
Thanks, you explain things in a very practical way. I can’t seem to find your Shepard’s Hook video in the list. Have you made it yet, or am I missing it?
I made it already but waiting for some good weather to make the thumbnail. It will be out with a few weeks. I'm hoping to get the thumbnail done by Sunday. I appreciate you watching and commenting. Keep a watch out it's won't be long ☺
It was just funny to me. How the video was cut, right after you said that you're going to try not to have a long drawn out conversation. Then the video cuts. It seemed to me that you edited out a long drawn out conversation. All the best bro.
Well for my demonstration it was. However your correct I'm working on a wall to show how to figure out how to get the correct measurements and shrinkage etc.
Mike, I'm glad I found your channel on bending conduit. You make it easier to understand how to bend conduit is multiple situations. I run a handyman business and I've always just went by the seat of my pants for saddle and offset bends. I once had an electrician say, " Don't worry about it, that's why they make couplings" LOL I look forward to using my newly learned talent on today's jobsite.
Awesome!!! How did it to. And I am glad that you found my channel too.
This table was free! 😂😂 love this guy
😂 😂 🤷
Youre explanations are the best and easiest to understand thanks!
I appreciate that. Thanks for watching and commenting ☺
youre tutorials are 100x better than anything out there. THAnks !!!
I appreciate that and thank you for watching. Have a great day ☺
Thanks for sharing your knowledge, some people like me really appreciate it, you’re helping me a lot I just started clases .
I will be letting more videos go in the next few weeks. More Bending and electrical stuff. Thanks for watching and commenting and I am glad this is helping you ☺
I’m brand new at this and my first time doing the 3 point was extremely well
Perfect glad to hear that
You soeak my language, bro! Thank you for the help
Always my pleasure. Thanks for watching and commenting ☺
Omg I love this video thank you so much this video help me finish my job now!
Awesome glad to hear that this helped you
Great help for bending pipe. Thanks for taking your time in doing these videos.
Oh it's my pleasure. Glad that they help. Have a great day ☺
Thanks I learned a lot from your videos.
I appreciate your comment and watching. I am glad to hear that this helped you
Thanks what a great refresher 😊
Thank you for teaching me. Thanks again.
Always my pleasure thanks for watching and commenting ☺
Best info about bending 3 saddle bend, thank you very much
Thank you for the kind words. I appreciate you watching and commenting ☺
Hey man the longer the video the better thanks
My pleasure thanks for watching and commenting ☺
im a first years apprentice and your video have help me alot !
thanks !
If you could do a video about shrinkage when you have multiple bend in one conduit it would be very nice !
I'm happy to hear that has helped you. I'm working on some more conduit Bending videos. They should be up soon I hope 🤞. I will do one on shrinkage for sure thanks for watching and commenting ☺
thanks for the video. it refresh my memory. ibew 617 apprentice over here
Awesome
thanks for teaching us!!!
My pleasure thanks for watching and commenting ☺
Thank you for the knowledge sir God bless you☺
My pleasure thanks for watching and commenting ☺
Thank you! Great teacher!!
I appreciate it.. Thanks for watching and commenting
Love your UA-cam man!
I truly appreciate it. I appreciate your support and watching. Have a great day ☺
Thanks man
You’re the best
I appreciate that. Thanks for watching and commenting ☺
Thanks man very helpful.
My pleasure thanks for watching and commenting ☺
Thanks again 🙏
Great teacher
I appreciate your comment and watching ☺
Another excellent video. Thanks
My pleasure thanks for watching and commenting ☺
That needs to be on a T-shirt election like it tight 😂😂😂❤
😂 😂 😂 I agree
Thanks for sharing this video Sir, make more videos always support you.
I def will keep watching and I appreciate you .
Does measurement remain the same for 3/4 emt
Yes
Thanks for this video Sir.
My pleasure thanks for watching
How do I get around a beam!? What bend do I need?? Thanks in advanced
ua-cam.com/video/UT-3DBdV29Q/v-deo.html. Definitely a 4 point saddle
Why did you bend the center mark at the star on the bender , and the other 2 bends at the notch ?
I'm not trying to be an azz but did you even watch the video??
is the 2.5 measurement just use for 1/2 in conduit? or also for the 3/4 and 1"?
You know for 3/4 and have never used measurements I used my finger trick which seemed to work really good. Once you get the hang of it. I don't want to lie to you and tell you that absolutely that measurement will eken, but now I'm gonna have to try it out for sure.
I wish you were the teacher at the trade school I went to!! Paid 20k n didn’t learn how to bend pipe smh but great videos I’m learning way more here
Well I appreciate that comment alot. I am sorry to hear that you had a bad teacher ...I will be adding more bending videos this upcoming winter so stay tuned
My man 😎
Thanks, you explain things in a very practical way. I can’t seem to find your Shepard’s Hook video in the list. Have you made it yet, or am I missing it?
I made it already but waiting for some good weather to make the thumbnail. It will be out with a few weeks. I'm hoping to get the thumbnail done by Sunday. I appreciate you watching and commenting. Keep a watch out it's won't be long ☺
Yez
Thank you for you teach me bending pipe, you teach to easy.
My pleasure!
Can you show a compound bend
Working on it. Thanks for the request
Thanku
My pleasure thanks for watching and commenting ☺
You didn't show where the 2 other lines are suppose to lined up on the bender
3 bend saddle was my first ever bend in the field.
Used the push through method.
Wow that's crazy. I didn't learn that bend unit I was better at all the basic bends.
Is 22.5 or 22 degrees standard?
Good question. It's labeled to be 22.5 but without precise tools how would you really know. It's 22.5-45-22.5
Make a video bending 1in emt with foot bender and a 3 point saddle
Challenge accepted
Instead , make your 45 on the star and the 22.5 on the drop point , sometimes you don’t even have to fix it , it might just be perfect
How do you fix a dog leg? Or do I have to grab a new pipe and start over?
I know that I keep saying it but honestly I have a video coming soon on this
👍💯 Appreciate
My pleasure thanks for watching and commenting ☺
@@MountaineerOutdoors 👍
On a 3pt saddle the shrink is 3/16”” for every inch of rise.. your center mark should be over the center of the obstruction..
Totally agree
Quick question so does multiplying it by2.5 always going to Stay the same no matter what height I get
It's 2.5 times your obstruction. The 2.5 is the multiplier. So if you had an 8 inch obstruction it would 8 X 2.5 = 20.
Fantastic
I appreciate it ☺
❤❤❤❤
Next time add 9/16ths to the 1st mark on a 3” saddle..
I will doing shrinkage videos this upcoming year thank you for your comment and watching ☺
0:25
😂😂😂😂🤣
The hair?? 😂 😂
It was just funny to me. How the video was cut, right after you said that you're going to try not to have a long drawn out conversation. Then the video cuts.
It seemed to me that you edited out a long drawn out conversation.
All the best bro.
I don't remember but knowing my track record I feel sure 😂 😂 😂.. Thanks for clarifying have a good one.
Shepard's hook
ua-cam.com/video/KVr9YBJCjhM/v-deo.html
Consider it already done
This is without context of where you are starting to where you need to go. That rando middle mark is not the right way to do it
Well for my demonstration it was. However your correct I'm working on a wall to show how to figure out how to get the correct measurements and shrinkage etc.
Useless verbiage
Thanks ☺