Ideal 74-046 Aluminum Bender with Handle for 1/2" EMT Conduit: Amazon: amzn.to/2spYnCq Also see: Playlist: EMT Bending by Sparky Channel: ua-cam.com/play/PLSD43kAzjUIT9C0yzPTkqULBCmJXX_goh.html Playlist: Electrical Wiring by Sparky Channel: ua-cam.com/play/PLSD43kAzjUITARtRyFqvVhmqwNm34Ck5k.html Playlist: 2023 NEC Video Playlist by Sparky Channel: ua-cam.com/play/PLSD43kAzjUISg0qOUMomYe8GH6a_C2xBv.html Playlist: IDEAL National Championship Competition Videos from Sparky Channel: ua-cam.com/play/PLSD43kAzjUIRfq58lAqj2dXKhTY_8QaDO.html
This is exactly how we were taught in the IBEW. I am no longer an Inside wireman but sometimes I have to be as an Industrial mechanic. When I need a refresher your videos are a lifesaver. There is real financial value in what you are teaching. I thank you immensely for doing it for free. i happily subscribed.
I got into the habit of marking my box offsets after watching the Ideal video with Ron. I do it for consistency. Now I can eye ball it, but if I need to do a bunch to match I'll take the extra few secs to mark them out.
@@fredbledsoe9841 exactly. When we were allowed to run pipes in steeldeck, i automaticly knew were to put my hand on the bender and when the pipe reached it, i left my hand there and simply turn the pipe and bend it again until it reached my hand with the same feel. 2" offset quick and easy. Almost never had to correct it ..perfect offset without having to compare it with an other straight pipe. Like you said, muscle memory!
Young guys starting out in the trade do not realize how much they've got it made nowdays, with the availability of info on the internet especially You Tube. The stuff this gentleman is teaching on his channel is essential fundamental knowledge that I learned when I started in the early 80's and you need to learn too to become knowledgeable and competent in the trade, and down the road when you test for your Master's License.
I bent my first pipe in 1977 and still doing it to this day. I learned all my tricks from watching guys like you on the job. Nothing is as pretty as a bunch of parallel pipes with perfect bands. I hate walking up to somebody else's job and having to run my stuff crooked so that it looks straight because the last guy didn't take the time. When an inspector walks up and sees a nice pipe job, he knows that you know what you're doing and will be nice to you on every job in the future. I developed some good relationships with inspectors over the years this way.
@@SparkyChannel I was 15 when I learned from my first mentor. Another man I worked with was an old gray guy in his mid 70s. The man knew his stuff! Another taught me that I'm not just bending pipe, I'm covering wire. I always keep the wire and pull in mind when you're running your pipe. You're not just connecting boxes.
I started in 80. Still doing it to this day. Pipe work is nice...but, as a 1 man show, I don't have the time to make it perfect. You can make your bends a bit long long and trim with a recip saw. Time is $, couplers are cheap. Makes for a good video. Apparently I don't like bending over my work to check angle degrees. I was glad to finally see the bender head in the air, not on the ground. That's my .02
I cant beleive this is free. God bless you man. Id pay you just to have a few hours of your time to learn more. I start today as an apprentice doing conduit bending. Im nervous but excited at the same time. Thank you for taking your time and showing us.
I’ve been a commercial electrician for around 35 years. Words of advice are to watch any videos you can find on electrical. There are basic videos of basic wiring and more technical videos on lighting controls, motor controls, and PLC’s for example. It only benefits you to learn as much as you can on your career. (Another suggestion, buy a GREENLEE conduit bender.There are more markings for guidance.)
I have been plumbing for about 28 years, just kinda stuck with it, but working alongside electricians has always made me jealous. you guys have the best tools and the cleanest tools. If I had to do all over again, I would definitely be a Sparky. Great video.
I went into electrical because my dad was a drywall finisher and I wanted to go into the trades too, he said I should be a plumber or an electrician because theres more work year round up here in Wisconsin. I went with electrical cause I always liked math and computers, I really like it, but I like building my house overall too.
I worked professionally as a concrete finisher, plasterer, roofer, plumber, carpenter and draftsman. I became jealous of the electrician's like you did so I became one. IMO it's the best trade. Thanks!
I wish the IEC taught it that in depth. Thank you for taking the time to be so clear and detailed. The three point saddle was something I just could not get the concept of and you showed just how easy it was. I feel like I could go do it now.
What a great resource for electricians. Completed my apprenticeship and now going to test with the ibew. These bends are the exact ones i have to study for my JW test
I just started my first site Monday as a jw. Bending emt is and always was my thing. Always was the guy piping electrical rooms and all that. I see a lot of apprentices in these comments. My biggest piece of advice, don’t overthink this stuff, and it’s gonna take you some time to be able to bend nice and clean and find the best routes.
ubrayj02 no. Haha. I worked under a couple of old timers. Just real pain in the ass, bitter dudes that would yell and yell until it was right. It just takes time and effort man. This entire trade gives you what you put into it. Always remember, Rome wasn’t built in a day. Haha.
Yup, after 40 plus years as an electrician, I must say. I'm truly grateful for the good engineers electrician and programmers that have shared skills with me over the years. I'm still learning after Years of IBEW and DBA industrial automation systems. Electrical trade is the best, I still love going to work and have never ever been without work. The science of electricity is amazing, We truly make life and the world a better place... Love to see shared knowledge and is nothing better than group's of concentric conduits installed correctly! It's an art.
Interesting methodology. Sin(10 deg) = 1/5.76, which is close enough to 1/6 to remember without a calculator. And the one side 'shrink' is (1-cos(22.5))*(height/sin(22.5)) = 0.2*height, which is rounded to 3/16" per inch on an old style tape measure. With all of this complexity, it is easy to see how experienced guys choose one method, memorize the ratios, and use them every day. Best video I've found on this topic.
This is how I was taught in 1st yr of the IBEW program. Learning the math, shrink factors, and multipliers. I try to use this method as much as possible as opposed to cut to fit to keep myself sharp. You make it look so easy and natural. 3 pt and 4 pt saddles are really easy to mess up with dog legs etc. 1/2" emt is atleast easy to fix but it gets a lot tougher with the larger diameters or RMC.
That is awesome! Thanks so much Sam. If you would like some Sparky Channel stickers write me at wpm44@yahoo.com and I'll send you some. I have 3 kinds: regular, Power Calcs and emt bending.
When I started reading my conduit bending book I knew that this subject was going to be easier learn visually. Now I can see the math with practical application. Thank you sir
Nothing looks more professional than proper offsets, parallel bends, and concentric 90 degree stubs. _"Make it look professional"_ is such an underrated statement/request!
Very good instructional, presented well, explained thoroughly and demonstrated flawlessly. I never did catch on to bending EMT the right way...methodically even though I got to help wire everything from the switch room to the transformers, circuit breaker panels, fuse boxes and outlets in a new production facility. Wish I had seen your videos back then. Retired now but not afraid now to help bend EMT. Thank you for these excellent tutorials!
Oh my gosh. I have a headache. Stars, arrows, notches, blue moons, and green clovers. Raised on rigid benders, just not that complicated. Also,I would recommend that beginners use the bender the way it was intended, until you get a feel for the bend, use the foot pedal and make sure you apply good foot pressure. Or you will end up with crinkled radius. If you dont apply the correct pressure at the right place when bending head up, you will end up with crinkled conduit ridius and a bow in the straight. Conduit bending is awesome, this was a great video and a great job, just adding my 2cents. I was so lucky as an apprentice 40yrs ago to have men like this to teach me.
Hey bill GREAT Video!!! In my 12 years of being an residential and comercial electrician in NYC, Bending conduits of different types and sizes is almost part of every project. one thing I have never done myself is bending concentric 90s using EMT. It would be a great video to help us who know about it learn about it. 👍
My respects 👏🏼 first journey/master electrician seen actually measure a box 📦 offset. Always been told just to eye it, and remember my first two years always going over haha.
the beginning of the year I started electrical work for 2 months then laid off due to the cough finally got into school for an union apprenticeship and am nervous as anything because I learned hardly anything. I hope someone like you is training me
Awwwww....you will be fine, my man. I was just like you, but i came into the app. program at the age of 38, and i was the same way you were....we will show you what you NEED to know, in all aspects of being "on the jobsite', with all proper PPE. And know how. Do not fear, trust me. just do what your told, and show RESPECT to everyone that runs in your path, along your carrier. And DO NOT BURN ANY BRIDGES, its a very small union world!! be safe and ON TIME!
Applied for my electrician apprenticeship.. my brother been teaching me since he is a electrician himself and trying get me a job so i gotta learn as much as i can
I would just like to add, the arrow is front of bend, notch is center of bend and star is back of bend, any bend any time. I use them all. My three bend saddle is a push though with star, notch, arrow. Great video lots of ways to skin a cat. Thank you
Now this is a tutorial. Information on why to do what you need to do. Plainly written out the data needed. Clear description of that to do as it's being done.
Only thing I would’ve done differently is a 4 bend saddle so all the pipes look the same. That also leaves way to add on to the other pvc pipe in the future.
After years of running raceway of all types EMT GRC IMC PVC NMT and my favorite of all has to be Greenfield and no inside screw connectors! But yes I was able to do a lot of bends by feel and a general measurement mostly for length. Now the work of art that is being demonstrated is different and all angles have to line up accordingly. Most excellent presentation.
It’s tricky because of the long end before the 90 , and a short pipe for leverage after the 90…. He probably fumbled around for a minute Don’t forget shrinkage ! It’s minimal for a box of set but that space in the connector can hook fishtape and skin wire
Unbelievable easy to understand explanation, if I can understand, it means everybody in the world can understand it. Thank you so much for your hard work and shaving your knowledge.
In my opinion Star, notch, arrow in that order is a great alternative to the traditional 3 point bend of notch, arrow, flip, arrow. No takinging the pipe out and flipping it arround and allows you to saddle closer to the edge of a pipe.
@4:40... Yeah the accepted Paradigm for the Box offset what you demonstrated is classical and basically perfect enough but I'm of the opinion you should move your first mark back Four even 5in... I like to have a little more latitude for any fine-tuning and precision I like to get my bends perfect and if you I have a small bit of pipe to work with on the nose it's just harder I found then if you give yourself that few extra inches also to when feeding wire it tends to act as a barrel to make it guide a little bit straighter and not get bound on the inside edge of the connector...
Specifically if you have insulated throat bushings I mean that's all cool I love them but the threads in there A lot of times especially if you're just pushing the wire box-to-box gets bound up on that inside thread on those small box offsets...
Good skills! In the UK we would call this a double set out from the box, and a bubble set to get over the pipe. We don’t use the hand tool you have there - we use a pipe vice and bender for all our tube, ours is normally threaded as well - the stuff your using we call conlock
it would have been useful for you to show the box offset on the 90 that will have to be done in the air cause of your saddle and its a pain in the ass to get the plain to line up thats why i live standoff straps cause any other electrician ever bend everything perfect then dog the last box offset i have
I bent pipe from 1990 to 92 it was the best part of the job. After work slowed down I got out of electrical work. But I sure miss it sometimes. Also is it just me or does that Romex stuff just don’t seem right to use
I don't kno jack about being an electrician or construction for that matter im a truck driver but dam this video was very interesting 🤔 I wish the teachers in school taught like this more people would pay attention in school if things made sense and are interesting, great video sir you got yourself a subscriber.
The best tool after your bender is a table, even a folding banquet table. It gives you a 90 degree angle, a straight edge and a work surface. AND you are NOT working on the floor! Cuts work time by a FRACTION also laying out sweeps and couplings made easier. And a lot easier having your hand tools boxes of hardware couplings straps etc off the floor. Weve built several 4x8 tables on casters to bring on jobs
I'll tell you the same thing my apprentices used to tell me when I had to show them how to bend a conduit, they said couldn't be done in one piece. "Not bad for an old guy".
Thanks for your rapid response! Also wondering if there are any comprehensive, step-by-step instructional videos that provide demonstration of basic layout procedures like you do in all of your more advanced videos. Thanks!
I just chanced on your video in the recommendations, not working with any conduit, but this is just awesome and satisfying to watch. I only occasionally bend copper and do sheet metal braking but this makes me want to run some EMT lol
I seem to always have trouble only with using the star...it seems like it's always off by about 2 inches when I do back to back 90s. I just cannot understand what I'm doing wrong because I mark to what I want the back of the 2nd 90 to be, face the bender out and put the mark at the star.
@@SparkyChannel Thank you sparky! When I was a young apprentice I always bent the offset backwards and got really frustrated after making a perfect bend only to screw it up in the end…maybe I was nervous and rushing too much? I didn’t like people watching me.
I’m building a little workshop in my shed. 200sqft. Good size. I wish I could run met for the electric just to make it that mush more industrial and badass look !
Well if you were paying attention at the beginning of the video. He clearly said the boss was comming back in 15 minutes. The video is 15 mins 36 seconds . So he probably had to go. THIS GUUUUY . Not listenin.
@Sparky Channel. Thanks Bill for these educational videos. I hope they may spark interest in the electrical trades. College education is not for everyone and some have realized it's not for them. Tech and manufacturing jobs don't happen without the carpenters, electricians, HVAC, masons, plumbers, and other trades who build and outfit the buildings. Hope you and your family stay well and safe.
That was an editing error. I'll try to do a video on handling a long piece of conduit like that with a stub and putting a box offset on the short end. I have a cool over the shoulder technique for that. The footage I have looked just like the first box offset but it's not the same. The 2nd box offset is all about handling the conduit. Thanks for pointing that out!
I'd like to thank you for your thorough explanation of electrical flow and circuits. Your video has given me confidence in doing certain basic home projects with safety in mind. Thanks sparky!
I’m very blessed. As an ibew jw inside wireman. Ive took great pleasure in learning conduit, and am arguably one of the best in my local on any side -emt, rigid, or robroy. Its art and should be treated as such
Awesome video. Never knew how to use one of those benders. I used to be a low volt guy so we rarely had to install conduit. Just chases and what not in the server room. Sometimes sleeves through firewalls. Nothing like this.
@@SparkyChannel I work for IBEW LCL # 3, and we rarley see excellence like you performed, in your video. you have a great persona, from A-Z. Im sure you did well for yourself/family! god bless. thank you so much for you video's, keep em' coming!
Ideal 74-046 Aluminum Bender with Handle for 1/2" EMT Conduit: Amazon: amzn.to/2spYnCq
Also see: Playlist: EMT Bending by Sparky Channel: ua-cam.com/play/PLSD43kAzjUIT9C0yzPTkqULBCmJXX_goh.html
Playlist: Electrical Wiring by Sparky Channel: ua-cam.com/play/PLSD43kAzjUITARtRyFqvVhmqwNm34Ck5k.html
Playlist: 2023 NEC Video Playlist by Sparky Channel: ua-cam.com/play/PLSD43kAzjUISg0qOUMomYe8GH6a_C2xBv.html
Playlist: IDEAL National Championship Competition Videos from Sparky Channel: ua-cam.com/play/PLSD43kAzjUIRfq58lAqj2dXKhTY_8QaDO.html
This is exactly how we were taught in the IBEW. I am no longer an Inside wireman but sometimes I have to be as an Industrial mechanic. When I need a refresher your videos are a lifesaver. There is real financial value in what you are teaching. I thank you immensely for doing it for free. i happily subscribed.
Thanks David! Welcome to Sparky Channel!
Mr sparky, you shouldda go on a tour teaching, I ll attend one of your seminars,
Thanks I learned a lot with this vid.
Why are you no longer in the IBEW?
I can do all but the saddle. I never got the hang of 3 points. The rest is simple.
Same as me, I used to do pipe often , but since I haven’t I’ve come here for refreshers
Your the first person I've seen actually measure a box offset.
It's good to teach it that way for those who are just learning this skill. Later on, when they are experienced, they can try doing it by eye.
Foreal but I’m not mad at it 💪🏾
I got into the habit of marking my box offsets after watching the Ideal video with Ron. I do it for consistency. Now I can eye ball it, but if I need to do a bunch to match I'll take the extra few secs to mark them out.
@@danielhady3021 you can save time by using 4 fingers from end of pipe to first mark every time without measuring
@@fredbledsoe9841 exactly.
When we were allowed to run pipes in steeldeck, i automaticly knew were to put my hand on the bender and when the pipe reached it, i left my hand there and simply turn the pipe and bend it again until it reached my hand with the same feel.
2" offset quick and easy. Almost never had to correct it ..perfect offset without having to compare it with an other straight pipe.
Like you said, muscle memory!
I Like this Guy, I'm in my 26th year of electrical, and I appreciate seeing other vets.
Thanks so much Rich!
Young guys starting out in the trade do not realize how much they've got it made nowdays, with the availability of info on the internet especially You Tube. The stuff this gentleman is teaching on his channel is essential fundamental knowledge that I learned when I started in the early 80's and you need to learn too to become knowledgeable and competent in the trade, and down the road when you test for your Master's License.
Right on brother! ⚡
I was just thinking about this the other day. So much knowledge available on the internet. I feel like a lot of people take it for granted.
I bent my first pipe in 1977 and still doing it to this day. I learned all my tricks from watching guys like you on the job. Nothing is as pretty as a bunch of parallel pipes with perfect bands. I hate walking up to somebody else's job and having to run my stuff crooked so that it looks straight because the last guy didn't take the time. When an inspector walks up and sees a nice pipe job, he knows that you know what you're doing and will be nice to you on every job in the future. I developed some good relationships with inspectors over the years this way.
Thanks so much! 1977 was a good year! Yes, it's important to gain the trust of an inspector by having him respect your work!
@@SparkyChannel I was 15 when I learned from my first mentor. Another man I worked with was an old gray guy in his mid 70s. The man knew his stuff! Another taught me that I'm not just bending pipe, I'm covering wire. I always keep the wire and pull in mind when you're running your pipe. You're not just connecting boxes.
I started in 80. Still doing it to this day. Pipe work is nice...but, as a 1 man show, I don't have the time to make it perfect. You can make your bends a bit long long and trim with a recip saw. Time is $, couplers are cheap. Makes for a good video. Apparently I don't like bending over my work to check angle degrees. I was glad to finally see the bender head in the air, not on the ground. That's my .02
I cant beleive this is free. God bless you man. Id pay you just to have a few hours of your time to learn more. I start today as an apprentice doing conduit bending. Im nervous but excited at the same time. Thank you for taking your time and showing us.
GBY as well! Best wishes!
How's it going man?? I'm looking to start my career as well
@@davidmunoz8326 Excellent! It's the best trade IMO.
@@SparkyChannel i just graduated from trade school and am looking into getting in the field. Any tips?
I’ve been a commercial electrician for around 35 years. Words of advice are to watch any videos you can find on electrical. There are basic videos of basic wiring and more technical videos on lighting controls, motor controls, and PLC’s for example. It only benefits you to learn as much as you can on your career. (Another suggestion, buy a GREENLEE conduit bender.There are more markings for guidance.)
I have been plumbing for about 28 years, just kinda stuck with it, but working alongside electricians has always made me jealous. you guys have the best tools and the cleanest tools. If I had to do all over again, I would definitely be a Sparky. Great video.
I went into electrical because my dad was a drywall finisher and I wanted to go into the trades too, he said I should be a plumber or an electrician because theres more work year round up here in Wisconsin. I went with electrical cause I always liked math and computers, I really like it, but I like building my house overall too.
I worked professionally as a concrete finisher, plasterer, roofer, plumber, carpenter and draftsman. I became jealous of the electrician's like you did so I became one. IMO it's the best trade. Thanks!
I wish the IEC taught it that in depth. Thank you for taking the time to be so clear and detailed. The three point saddle was something I just could not get the concept of and you showed just how easy it was. I feel like I could go do it now.
Glad it was helpful!
As a 1st year apprentice this was immensely helpful. You explained it in a way that leaves absolutely zero questions.
Great to hear! Thanks!
What a great resource for electricians. Completed my apprenticeship and now going to test with the ibew. These bends are the exact ones i have to study for my JW test
Fantastic! You can do it!
You’re like the Bob Ross of pipe bending. Great explanation and enjoyable to watch. Thank you
Huge compliment! RIP Bob!
I never thought there might be a person, explaining so easy to understand.
I just started my first site Monday as a jw. Bending emt is and always was my thing. Always was the guy piping electrical rooms and all that. I see a lot of apprentices in these comments. My biggest piece of advice, don’t overthink this stuff, and it’s gonna take you some time to be able to bend nice and clean and find the best routes.
I love it! And congrats on becoming Journeyman Wireman!
Did you set up a practice wall at home to work through the learning curve?
ubrayj02 no. Haha. I worked under a couple of old timers. Just real pain in the ass, bitter dudes that would yell and yell until it was right. It just takes time and effort man. This entire trade gives you what you put into it. Always remember, Rome wasn’t built in a day. Haha.
That is exactly right. Don't over think it
Dayuuuuummmmm Sparky!!! You break this down to the 4 year old understanding. I wish I had you teaching me conduit bending back when...
The world needs people like you champion. Thanks for your video.
My pleasure, thanks Franklyn!
I’m glad i can come to your channel to learn what my trade school is unable to teach Because of time restrictions, thank you
I'm glad I could help!
Yup, after 40 plus years as an electrician, I must say. I'm truly grateful for the good engineers electrician and programmers that have shared skills with me over the years. I'm still learning after Years of IBEW and DBA industrial automation systems.
Electrical trade is the best, I still love going to work and have never ever been without work. The science of electricity is amazing, We truly make life and the world a better place...
Love to see shared knowledge and is nothing better than group's of concentric conduits installed correctly! It's an art.
I sure do agree! Thanks!
Ive been bending conduit for 15plus yrs and i have to say your a great teacher so keep it up and God Bless
Wow, thanks!
Interesting methodology. Sin(10 deg) = 1/5.76, which is close enough to 1/6 to remember without a calculator. And the one side 'shrink' is (1-cos(22.5))*(height/sin(22.5)) = 0.2*height, which is rounded to 3/16" per inch on an old style tape measure. With all of this complexity, it is easy to see how experienced guys choose one method, memorize the ratios, and use them every day. Best video I've found on this topic.
Thanks so much!
This is how I was taught in 1st yr of the IBEW program. Learning the math, shrink factors, and multipliers. I try to use this method as much as possible as opposed to cut to fit to keep myself sharp. You make it look so easy and natural. 3 pt and 4 pt saddles are really easy to mess up with dog legs etc. 1/2" emt is atleast easy to fix but it gets a lot tougher with the larger diameters or RMC.
I am a journeyman electrician in Alaska with IBEW 1547 and I adore watching your videos. I send your videos to my apprentices
That is awesome! Thanks so much Sam. If you would like some Sparky Channel stickers write me at wpm44@yahoo.com and I'll send you some. I have 3 kinds: regular, Power Calcs and emt bending.
When I started reading my conduit bending book I knew that this subject was going to be easier learn visually. Now I can see the math with practical application. Thank you sir
Excellent! Sounds right to me. I learn much better visually too.
Nothing looks more professional than proper offsets, parallel bends, and concentric 90 degree stubs. _"Make it look professional"_ is such an underrated statement/request!
Well said! Thanks so much, I totally agree! :)
Very good instructional, presented well, explained thoroughly and demonstrated flawlessly. I never did catch on to bending EMT the right way...methodically even though I got to help wire everything from the switch room to the transformers, circuit breaker panels, fuse boxes and outlets in a new production facility. Wish I had seen your videos back then. Retired now but not afraid now to help bend EMT. Thank you for these excellent tutorials!
Hi Rene! Thanks for your years of service helping to build America!
I absolutely loved your casual demeanor on this video
Thanks so much. That's the way I work in real life. You live longer that way. lol! I learned it from my Dad, and I hope I can pass it on to others.
Oh my gosh. I have a headache. Stars, arrows, notches, blue moons, and green clovers. Raised on rigid benders, just not that complicated. Also,I would recommend that beginners use the bender the way it was intended, until you get a feel for the bend, use the foot pedal and make sure you apply good foot pressure. Or you will end up with crinkled radius. If you dont apply the correct pressure at the right place when bending head up, you will end up with crinkled conduit ridius and a bow in the straight. Conduit bending is awesome, this was a great video and a great job, just adding my 2cents. I was so lucky as an apprentice 40yrs ago to have men like this to teach me.
Thanks Joe!
Hey bill GREAT Video!!! In my 12 years of being an residential and comercial electrician in NYC, Bending conduits of different types and sizes is almost part of every project. one thing I have never done myself is bending concentric 90s using EMT. It would be a great video to help us who know about it learn about it. 👍
I have a few on the subject. Here's one: IDEAL National Championship Pro 2nd Round Parallel EMT Bends: ua-cam.com/video/UJka4Z5LemY/v-deo.html
My respects 👏🏼 first journey/master electrician seen actually measure a box 📦 offset. Always been told just to eye it, and remember my first two years always going over haha.
Thanks Mike!
Been watching you for a few years. I’m still in my apprenticeship.your a top notch electrician. Thanks for the video!
I appreciate that! Thanks so much!
Another great video Bill. That wall is really starting to look like an industrial power distribution center.
LOL! Thanks Mike!
Just finished my trade school last year this video helped me tremendously thank you for the time out of your day and great job btw
Thanks so much!
the beginning of the year I started electrical work for 2 months then laid off due to the cough finally got into school for an union apprenticeship and am nervous as anything because I learned hardly anything. I hope someone like you is training me
I understand. Best wishes!
Hey, it's not just a cough! I think there is some sneezing too.....
Awwwww....you will be fine, my man. I was just like you, but i came into the app. program at the age of 38, and i was the same way you were....we will show you what you NEED to know, in all aspects of being "on the jobsite', with all proper PPE. And know how. Do not fear, trust me. just do what your told, and show RESPECT to everyone that runs in your path, along your carrier. And DO NOT BURN ANY BRIDGES, its a very small union world!! be safe and ON TIME!
I actually feel smarter after watching this video lol. You made it too easy to learn.
That's great, thanks Joshua!
Applied for my electrician apprenticeship.. my brother been teaching me since he is a electrician himself and trying get me a job so i gotta learn as much as i can
That's great Roberto!
You get into an apprenticeship yet?
Very helpful. Nice introduction to accurately bending conduit. There sure is a lot involved.
Glad it was helpful! Thanks Stuart!
As someone starting out in this trade you are a hero
Beautiful work after 25 years on electrical field in Chicago Illinois bending conduit I still learning 👍👍👍
Fantastic! I'm still learning too!
I would just like to add, the arrow is front of bend, notch is center of bend and star is back of bend, any bend any time. I use them all. My three bend saddle is a push though with star, notch, arrow.
Great video lots of ways to skin a cat. Thank you
Great tip, thanks!
Now this is a tutorial.
Information on why to do what you need to do.
Plainly written out the data needed.
Clear description of that to do as it's being done.
Thanks John!
Only thing I would’ve done differently is a 4 bend saddle so all the pipes look the same. That also leaves way to add on to the other pvc pipe in the future.
That's really smart !
Conduit bending was one of the programs I took at a technical college. It was so much fun bending 1/2”,3/4,”1” and 2” EMT.
Excellent!
I taught myself how to bend pipe started with 1 1/4 emt a 90 degree bend not hard at all for me...
I love looking at conduit runs in amusement parks 🙂
Me too! :)
That’s great. Years back I got questioned by security at Disneyland when I was following their fire raceways.
@@MarcoPolo-zc6zo LOL! I know exactly what you're saying.
Nice illustration “Sparky” love your feed
One thing though you forgot to show the last box offset
Learning more and more from your channel
Wow, thank you so much!
I learn so much better after work and , at my own pace, learning from you. Priceless knowledge. Thank you again!
Excellent, thanks Steven!
I could have used this back in 04. Thanks for posting! I like pipe bending videos.
You're welcome!
We just got into conduit bending in the level one electrical course I’m taking and this cleared up a ton of the confusion I had. Good stuff
Excellent!
After years of running raceway of all types EMT GRC IMC PVC NMT and my favorite of all has to be Greenfield and no inside screw connectors!
But yes I was able to do a lot of bends by feel and a general measurement mostly for length.
Now the work of art that is being demonstrated is different and all angles have to line up accordingly.
Most excellent presentation.
Thanks so much!
I like it, but I wish you had shown how you did the last box offset
Here you go: How To Make a Box Offset on the End of a Long and Complicated Conduit: ua-cam.com/video/z8idfgOQby0/v-deo.html
It’s tricky because of the long end before the 90 , and a short pipe for leverage after the 90…. He probably fumbled around for a minute
Don’t forget shrinkage ! It’s minimal for a box of set but that space in the connector can hook fishtape and skin wire
Unbelievable easy to understand explanation, if I can understand, it means everybody in the world can understand it. Thank you so much for your hard work and shaving your knowledge.
Thank you very much you're really professional I wish we have a more people like this in the field
Thanks so much!
You are a gifted teacher...thank you!
Thanks Aaron!
Saw this while in Trade School as part of the visual learning in the Level 1 curriculum before we actually bent some conduit, was incredibly helpful
Awesome, what trade school did you go to?
This guy is an excellent teacher.
Thanks Lincoln!
I usually measure every bend but for box offsets I usually just make a mark at 1” and 4” and use the tip of the shoe instead of the line or arrow
I have no idea in the world what you guys are talking about... 😒
In my opinion Star, notch, arrow in that order is a great alternative to the traditional 3 point bend of notch, arrow, flip, arrow. No takinging the pipe out and flipping it arround and allows you to saddle closer to the edge of a pipe.
Thanks Abel!
This was a great video.. I’m very grateful because my instructor is not that good on teaching.
I’m 42 years old and I’m just learning how to bend pipe thank you
Fantastic! Best wishes.
@4:40...
Yeah the accepted Paradigm for the Box offset what you demonstrated is classical and basically perfect enough but I'm of the opinion you should move your first mark back Four even 5in... I like to have a little more latitude for any fine-tuning and precision I like to get my bends perfect and if you I have a small bit of pipe to work with on the nose it's just harder I found then if you give yourself that few extra inches also to when feeding wire it tends to act as a barrel to make it guide a little bit straighter and not get bound on the inside edge of the connector...
Specifically if you have insulated throat bushings I mean that's all cool I love them but the threads in there A lot of times especially if you're just pushing the wire box-to-box gets bound up on that inside thread on those small box offsets...
Good skills!
In the UK we would call this a double set out from the box, and a bubble set to get over the pipe. We don’t use the hand tool you have there - we use a pipe vice and bender for all our tube, ours is normally threaded as well - the stuff your using we call conlock
Excellent!
The best teacher for bending pipe
Thanks so much!
This video is a life saver, as it very simply explained exactly what I needed to know.
Thanks!
it would have been useful for you to show the box offset on the 90 that will have to be done in the air cause of your saddle and its a pain in the ass to get the plain to line up thats why i live standoff straps cause any other electrician ever bend everything perfect then dog the last box offset i have
Yep
Its to the point without wasting screen time i love it
Remember to take a 5 minute break b4 starting. LOL!
I bent pipe from 1990 to 92 it was the best part of the job. After work slowed down I got out of electrical work. But I sure miss it sometimes. Also is it just me or does that Romex stuff just don’t seem right to use
Hi! I agree, wire run in EMT makes a better and longer lasting job.
I started my apprenticeship 17 years ago as a low voltage guy. I'm still kicking myself that I didn't go electrician.
Best wishes!
Your are my teacheeeer!! I’m going to tell you that in Spanish too” tu eres mi profesooorrrr “ 😀
¡Gracias!
Bump for your new channel op. Bet it's even better.
I think so. Thanks!
I don't kno jack about being an electrician or construction for that matter im a truck driver but dam this video was very interesting 🤔 I wish the teachers in school taught like this more people would pay attention in school if things made sense and are interesting, great video sir you got yourself a subscriber.
Thanks so much!
Watching this vid encourages me to proceed being a sparky. Thank you for this video. I enjoyed watching it.
You can do it!
The best tool after your bender is a table, even a folding banquet table. It gives you a 90 degree angle, a straight edge and a work surface. AND you are NOT working on the floor! Cuts work time by a FRACTION
also laying out sweeps and couplings made easier. And a lot easier having your hand tools boxes of hardware couplings straps etc off the floor.
Weve built several 4x8 tables on casters to bring on jobs
Sounds great thanks! I've seen many emt bending techniques. I would never insist on one particular style.
Find a job you love; never work another day of you life.
Great video.
😊
Nice!
I want to see more on the second box offset. That's where I always mess up
Here you go: How To Make a Box Offset on the End of a Long and Complicated Conduit: ua-cam.com/video/z8idfgOQby0/v-deo.html
I was using that Dewalt laser today laying out a rack of 3” Emt. I’m bending everything on a Greenlee 881able bender.
Excellent! :)
I'll tell you the same thing my apprentices used to tell me when I had to show them how to bend a conduit, they said couldn't be done in one piece. "Not bad for an old guy".
LOL! As long as you can do it, it doesn't matter how old you are. :)
the Scotty Kilmer of electrical
LOL!
I was thinking the exact same thing! I though they must be brothers!😁🛫
Thanks for your rapid response! Also wondering if there are any comprehensive, step-by-step instructional videos that provide demonstration of basic layout procedures like you do in all of your more advanced videos.
Thanks!
Please see my Playlist: EMT Bending by Sparky Channel: ua-cam.com/play/PLSD43kAzjUIT9C0yzPTkqULBCmJXX_goh.html
I just chanced on your video in the recommendations, not working with any conduit, but this is just awesome and satisfying to watch. I only occasionally bend copper and do sheet metal braking but this makes me want to run some EMT lol
Thanks for giving Sparky Channel a watch!
I seem to always have trouble only with using the star...it seems like it's always off by about 2 inches when I do back to back 90s. I just cannot understand what I'm doing wrong because I mark to what I want the back of the 2nd 90 to be, face the bender out and put the mark at the star.
Thank you, I really appreciate you taking the time to share your wisdom with us- priceless
Great video! I was hoping you would show the last box offset as when I was younger I used to always flip it to the wrong side and ruin the bend. ☹️
Here you go: How To Make a Box Offset on the End of a Long and Complicated Conduit: ua-cam.com/video/z8idfgOQby0/v-deo.html
@@SparkyChannel Thank you sparky! When I was a young apprentice I always bent the offset backwards and got really frustrated after making a perfect bend only to screw it up in the end…maybe I was nervous and rushing too much? I didn’t like people watching me.
@@Mark-eu4di Been there done that. LOL!
Great video... Only thing, you didn't add the final box set for the second box. I saw it's there but you didn't bend it
Here you go: How To Make a Box Offset on the End of a Long and Complicated Conduit: ua-cam.com/video/z8idfgOQby0/v-deo.html
I’m building a little workshop in my shed. 200sqft. Good size. I wish I could run met for the electric just to make it that mush more industrial and badass look !
Why can’t you?
@@chandlersmithie3961 good point!
Omg 😮I love this channel and as new sparky this is gold!! I’m goin to make myself a board like this to practice my bends
Excellent!
Why didn’t you show that final box offset into the upper bell box after you cut and reamed the conduit?
Well if you were paying attention at the beginning of the video. He clearly said the boss was comming back in 15 minutes. The video is 15 mins 36 seconds . So he probably had to go. THIS GUUUUY . Not listenin.
@@dr.molitov9290 He IS the boss. Thanks for commenting on a question you don’t know the answer to.
@Sparky Channel. Thanks Bill for these educational videos. I hope they may spark interest in the electrical trades. College education is not for everyone and some have realized it's not for them. Tech and manufacturing jobs don't happen without the carpenters, electricians, HVAC, masons, plumbers, and other trades who build and outfit the buildings.
Hope you and your family stay well and safe.
Good points! Thanks and have a great day! You guys stay safe as well.
i normally like to go through 2 or 3 extra emt when im bending !!!
I understand.
Sparky, you didn't show the other offset after the stub
That was an editing error. I'll try to do a video on handling a long piece of conduit like that with a stub and putting a box offset on the short end. I have a cool over the shoulder technique for that. The footage I have looked just like the first box offset but it's not the same. The 2nd box offset is all about handling the conduit. Thanks for pointing that out!
Best explanation I've seen on youtube.
Thanks so much!
@Mae Barker Excellent!
Thanks!
Word I'm always told just give it a little ummph and other ummmph lmao
I'd like to thank you for your thorough explanation of electrical flow and circuits. Your video has given me confidence in doing certain basic home projects with safety in mind. Thanks sparky!
I’m very blessed. As an ibew jw inside wireman. Ive took great pleasure in learning conduit, and am arguably one of the best in my local on any side -emt, rigid, or robroy. Its art and should be treated as such
I agree!
I really preciate the video sir 🙏🏼 but I would be even more thankful if you showed us how you did that last box off sit 😅 if you could pls
Here you go: How To Make a Box Offset on the End of a Long and Complicated Conduit: ua-cam.com/video/z8idfgOQby0/v-deo.html
Awesome video. Never knew how to use one of those benders. I used to be a low volt guy so we rarely had to install conduit. Just chases and what not in the server room. Sometimes sleeves through firewalls. Nothing like this.
Very cool!
i learn alot and i always watch your channel.
Great to hear!
I WANT YOU AS A PARTNER!!!! wow...what a on point man..great job.
Thanks so much. That's an excellent compliment!
@@SparkyChannel I work for IBEW LCL # 3, and we rarley see excellence like you performed, in your video. you have a great persona, from A-Z. Im sure you did well for yourself/family! god bless. thank you so much for you video's, keep em' coming!
@@-MrRichBiker1967 Thanks! God bless you as well! I hear you guys have been getting a lot of snow in New York. Cheers from San Diego!
⚡⚡⚡The best you tube channel for electrical⚡⚡⚡
Thanks Chris!
Where did you start the measurement to mark the 90° bend? I’m trying to learn as much as possible from you. You rock sir!!
This video should answer your question: How to Make Accurate 90° EMT Stubs with 1/2", 3/4" and 1" EMT Conduit: ua-cam.com/video/Ev0QjTxBMAI/v-deo.html
Nice video Bill. I really appreciate them because I'm an apprentice lol
Excellent, that sounds great!
Thank you so much for making these video! Simple and professional and great knowledge 😃🙌😎
Thanks!
Why didn’t you show bending of second box offset?
And the length calculations for said 'second offset'. He clearly messed up/forget about the 2nd B.O, and tried to cover up for it. FAIL ! ....
Because box offsets are self explanatory. You do two 10 degree offsets right after each other
Here you go: How To Make a Box Offset on the End of a Long and Complicated Conduit: ua-cam.com/video/z8idfgOQby0/v-deo.html
@@stevejoos8953 shrink on a 10 degree bent 3/8 offset is negligible, if that's what you are referring to.
When did you do the last box offset. Before or after you cut the vertical to the 38 5/16 length. I think you left step that out.
Here you go: How To Make a Box Offset on the End of a Long and Complicated Conduit: ua-cam.com/video/z8idfgOQby0/v-deo.html