My car was hit by hail and, since it's a cheap Toyota Yaris, I don't want to pay a professional (it would probably cost half the car's value)...but now I'm inspired. Thank you for sharing!
@@JJBanueloswell i became a pro afther lot of shit i payd over time ... step by step came to the point when i start building several citroen ds convertible taking only engine bay and front fenders from donor citroens ... Now in the Gwagen bussines... Realising pdr so i can help and give support to my wife's job... Greetings...
So my brand new dodge was vandalized recently. Cost was nearly $7,500 to fix everything. I got the truck back and 3 days later my son opens his door and dings it against a tree. Just got this kit. Thanks for the video.
My car got nailed by a hail storm 2 days ago, its 10 years old. I am thinking of repairing the damage by my self. Thank you for making this great video and giving me some self confidence to do it my self.
This was fun to watch, I'm inspired! Maybe sometimes on the small dents don't pull until the glue lets go, just pull a little and take the puller off, spray some alcohol and remove the plastic piece. Then you won't have to knock down so much. Nice job!
The popping sound of the glue releasing,sends shock through surface and helps promote material to form back into original shape,but sometimes the smaller dimples/dents can use your method:)
Great job and great little helper. Cant wait to give this thing a go with my son on our Highlander we purchased last week that has a couple shopping cart dings in one of the door panels.
Good video. I have a question. It’s cold where I am. Will the colder weather cause issues if I attempt to remove the dents with this kit? Or should I wait for a warmer day? It’s in the 50’s-30’s here.
Yes if the body panel is cold the dent will likely be harder to remove. You can apply some heat to the panel with a heat gun or a hairdryer to help heat the dent your trying to remove.
Thanks for the demo. I just received my kit yesterday and noticed no knock down tools. Ordered what looks like the same knock down tools that you did just three minutes before watching your video.
So you would recommend this item that it works? My car is filled with door dings from people who don’t know how to open their doors or people backing up into my car sigh. Looking to buy a repair kit. Thanks
Walk a couple hundred extra feet when parking somewhere. It is well worth the walk. Also always return shopping carts. It brings you good luck to avoid one slamming into your vehicle
What is the difference between the clear glue sticks and the black ones? I just bought this kit, however, there are no instructions regarding the glue sticks.
They usually go by surface temps & category of strength hold. Clear ones are for cool surfaces & blacks are for hot surfaces. Both will work fine for fridge dents on
I think most PDR workers do warm up the metal. Specially if it's a cold environment and when it is something big they are pulling. And they warm it even more around the "crown" area (Where the metal has been bent).
I just bought this kit and I don't know what i do wrong but i always pul up the whole thing plastic with glue on it. And with not a lot of pressure i can use my hands. Should i use less glue or is there any time that i need to w8? I was letting it dry for about 5 min. Thanks
Make sure the surface is clean of any oils & dirt & also surface temps of the panel your working with are warm. If the panel is cold the glue won’t adhere to it very well
@@JJBanuelos i have cleaned the surface really good. And preheat it also. How long should i w8 to pull? Glue always stays on the plastic it doesn't stick to the car. Should i polish it before?
@@JJBanuelos maybe it's bad glue, i have just read that temperature needs to be between 15-23°C and we have arround 28-30 right now. So maybe that is the reason?
I accidentally backed up and made a small dent in my car that has been driving me crazy for such a long time... Found this tool on Amazon and found your video to learn how to use it. Thank you for teaching us how! (P.s do you think it’ll work on a bumper dent as well?)
@@usabro410 Thanks a lot buddy. ua-cam.com/video/SMqtsIe5oqw/v-deo.html pls check the link to see how I repaired a huge dent.It was my first time with these tools. Pls let me know what you feel about my work.
People have no clue the time and skill it takes to do PDR to a FACTORY finish. Nothing compared to this but hey spend $50 and do a hail car that cost $7,000 professionally done hail repair. You end up damaging your paint and leaving high and lows everywhere.
I suspect u r going to regret teaching ur boy to put a dent in the test panel..lol..”Look how good I did Daddy!!, I dented your car in 10 places and I made sure it was when we’re out and not at home!!”
Looks great. I just ordered this kit for my wifes car.
right off the bat, one can easily tell that you're a kind and patient father bravo my man bravo
Thank you sir, I definitely am.
Yes for sure
Yeah thats awesome but a good lesson also teach your kids not to interupt , thats a great lesson my parents taught me
My car was hit by hail and, since it's a cheap Toyota Yaris, I don't want to pay a professional (it would probably cost half the car's value)...but now I'm inspired. Thank you for sharing!
Thanks! There’s definitely a lot of things we can do that most professionals will charge a arm and a leg for. Glad this was enough to get you inspired
@@JJBanueloswell i became a pro afther lot of shit i payd over time ... step by step came to the point when i start building several citroen ds convertible taking only engine bay and front fenders from donor citroens ...
Now in the Gwagen bussines...
Realising pdr so i can help and give support to my wife's job...
Greetings...
So my brand new dodge was vandalized recently. Cost was nearly $7,500 to fix everything. I got the truck back and 3 days later my son opens his door and dings it against a tree. Just got this kit. Thanks for the video.
Seriously, I’m impressed. Thank you for the advice
That was a nice job....you can actually see the dent coming out as the reflection from the florescent light straightens out.
Appreciate it that. This kit is definitely worth it.
My car got nailed by a hail storm 2 days ago, its 10 years old. I am thinking of repairing the damage by my self. Thank you for making this great video and giving me some self confidence to do it my self.
Dude, great son, and great job on the ding repair.
Thanks!
Great video, and the interaction with your son is adorable.
Appreciate it that!
Excellent disclaimer young man 👌🏾
I was gonna buy a hood, for 3 little dents that gets me crazy, thank you for the video
Will it work on a dent on a stainless steel dishwasher? Why did you choose the yellow stick and not the black?
This was fun to watch, I'm inspired! Maybe sometimes on the small dents don't pull until the glue lets go, just pull a little and take the puller off, spray some alcohol and remove the plastic piece. Then you won't have to knock down so much. Nice job!
Nice thanks for the tips! Thanks for watching! Don’t forget to subscribe!
The popping sound of the glue releasing,sends shock through surface and helps promote material to form back into original shape,but sometimes the smaller dimples/dents can use your method:)
Great job and great little helper. Cant wait to give this thing a go with my son on our Highlander we purchased last week that has a couple shopping cart dings in one of the door panels.
Thanks!! Congrats on the new ride & good luck with the dents. This kit should do the trick
I love that he told the kids and his own kid that this is just for the video! Cuz lord knows! 😂
Well done! Not perfect, but better than most professional PDR guys I have hired.
Good video. I have a question. It’s cold where I am. Will the colder weather cause issues if I attempt to remove the dents with this kit? Or should I wait for a warmer day? It’s in the 50’s-30’s here.
Yes if the body panel is cold the dent will likely be harder to remove. You can apply some heat to the panel with a heat gun or a hairdryer to help heat the dent your trying to remove.
@@JJBanuelos thanks.
Cute little apprentice you have there ... great to watch and learn with you !
Thank you! Yes he loves being with me at all times.
Thank you so much for the review wasn't trying to pay an arm and leg to remove the 1nch dents from my sub 👏👏👏😁😁
No problem. Thanks for watching hope you get your dents out. 👍
@Davion Zahir simp..le
Thanks for the demo. I just received my kit yesterday and noticed no knock down tools. Ordered what looks like the same knock down tools that you did just three minutes before watching your video.
I found using as little glue as possible works better, and using the smaller tabs
nice thanks for the tip!
Daddy look I made you some more dents to practice on ! The bad thing that neighbor wasn’t happy but I told him you can fix it. 😂
Right 😂
How do you get the glue of the plastic round thing
That was fantastic.i just purchased one. The pencil pin punch whats correct name for them
Awesome, yes this is a really great tool & kit
So you would recommend this item that it works? My car is filled with door dings from people who don’t know how to open their doors or people backing up into my car sigh. Looking to buy a repair kit. Thanks
Yup should definitely get them out just as long as they don’t have any creases & are just dents.
Walk a couple hundred extra feet when parking somewhere. It is well worth the walk. Also always return shopping carts. It brings you good luck to avoid one slamming into your vehicle
What is the difference between the clear glue sticks and the black ones? I just bought this kit, however, there are no instructions regarding the glue sticks.
They usually go by surface temps & category of strength hold. Clear ones are for cool surfaces & blacks are for hot surfaces. Both will work fine for fridge dents on
@@JJBanuelos Ok, good to know. I will be using mine on my car (though I'll wait until spring to do so).
Learning a lot on each video. Cool stuff.
Appreciate it! 👊🏼
Very clear instructions!!!
Does the kit work on plastic bumpers? One person below commented that it did not. Do you have any opinion? Thanks.
Use a hair dryer
Will warming the area with a heat gun keep the metal too hot for the glue to work?
I think most PDR workers do warm up the metal. Specially if it's a cold environment and when it is something big they are pulling. And they warm it even more around the "crown" area (Where the metal has been bent).
How’d you get the glue off so easy?
Lynx deodorant removes the glue straight away
I just bought this kit and I don't know what i do wrong but i always pul up the whole thing plastic with glue on it. And with not a lot of pressure i can use my hands. Should i use less glue or is there any time that i need to w8? I was letting it dry for about 5 min. Thanks
Make sure the surface is clean of any oils & dirt & also surface temps of the panel your working with are warm. If the panel is cold the glue won’t adhere to it very well
@@JJBanuelos i have cleaned the surface really good. And preheat it also. How long should i w8 to pull? Glue always stays on the plastic it doesn't stick to the car. Should i polish it before?
@@248rok no you shouldn’t have to go those extremes. Possibly bad glue. Did you use both style of sticks to see if it made a difference?
@@JJBanuelos maybe it's bad glue, i have just read that temperature needs to be between 15-23°C and we have arround 28-30 right now. So maybe that is the reason?
LOL!! Ask who is willing to help with a hammer, and a kid is the first one to do it! Awesome job little helper!
Awesome buddy thank you for the great video!!! I grew up in the auto body business. I only work on my own stuff now. That’s amazing!
Appreciate it that!
Every kids dream. Sent a car with permission. Lol.
Well done 🏅
Lol. Love the little guy.
Today bought one , I think patients is key ..😊
Mahalo for the informative video. Blessings, Gil
Thanks 🙏🏻
how to order??
I accidentally backed up and made a small dent in my car that has been driving me crazy for such a long time... Found this tool on Amazon and found your video to learn how to use it. Thank you for teaching us how!
(P.s do you think it’ll work on a bumper dent as well?)
Most bumpers are plastic and this kit is designed for metal, so it won't work with plastic damage (it didn't work on my Infiniti).
did it work out??
Does it work on huge dents as well?
with bigger tabs yes or the mutl tabs that u slip a bar through and then use a slide hammer on
@@usabro410 Thanks buddy
@@andymotovlogs546 No problem brother. Check out this guy “discount dent - man of steel” on UA-cam. He’s really good.
@@usabro410 Thanks a lot buddy. ua-cam.com/video/SMqtsIe5oqw/v-deo.html pls check the link to see how I repaired a huge dent.It was my first time with these tools. Pls let me know what you feel about my work.
That’s pretty good was considering getting one might just do it, how long did it take you for that?
without any edits it prob took about less than 30min. Its a really cool tool.
@@JJBanuelos damn 30 minutes for just one ?
@@ZiggyGood right 🤣 I’ve got small hail or acorn damage every couple feet💀 going to take me a few days for sure but probably going to be worth it
Does it work on plastic?
Prob I haven’t tried it
Ordered that kit!! Thanks for the great how-to video
Thanks!
My glue gun isn't heating up, just got 2 days ago says 3-5 min maybe more like 2 hrs
That’s definitely defective I would return it.
Got a link on both items
They should be below my description
Thanks!
may I invite you to shoot a video for my dent puller kit?
Just purchased one using your link 👍🏼 thanks
Awesome 👏
Well done, thanks for sharing. :)
No problem thanks for watching
Did you keep working it until it was perfect? Or not
class video, i have just ordered one of those kits, hopefully it works for me
Should do fine just take your time & the dent will come out. Takes time & patience
kit 52$ in USA in Australia 230$ but nice kit
Wow that’s really expensive!
Wow that’s really expensive
Me neither
Go on Ali Express
Great video. Apply a dent. 😆
People have no clue the time and skill it takes to do PDR to a FACTORY finish. Nothing compared to this but hey spend $50 and do a hail car that cost $7,000 professionally done hail repair.
You end up damaging your paint and leaving high and lows everywhere.
I hope u dont wake up one morning with dents all over your rides 😂😂😂
Nicely done. Thank you for sharing.
Thanks! 👊🏼
Very impressive
Thanks from Australia.
I suspect u r going to regret teaching ur boy to put a dent in the test panel..lol..”Look how good I did Daddy!!, I dented your car in 10 places and I made sure it was when we’re out and not at home!!”
no one gonna talk about how clear the hood is
😬
Nice job
Thanks
👍
He want the new one 😂😂😂
It doesnt even work
Use the small head at the center
If only I didn’t have 200 dents in my car….. I probably wouldn’t be finished for 20 years doing this.
You tapped way too hard
Yeah just a little bit but gotta put it to the test
@@JJBanuelos It’s ok now. You were being a silly goose
Sweet. But you attacked the wrong dent 😂
That black glue stick isn’t worth a damn
If the surface isn’t very clean the hot glue won’t hold very well.
way out of skill set.......
I agree this was one of my first attempts using this kit