Turbo 1968 C10 BUILD- Bodywork is Finally going well!
Вставка
- Опубліковано 21 кві 2023
- Thank you all for the support!
For more content and some behind the scenes, check out my social media pages!
Instagram: ag_trucks?igshi...
Tik tok: agtrucks - Авто та транспорт
Damn. I wanna scan those fenders.
Dry Ice Blasting!!!
Bong rips!!!
@@edochoa3452 What should tear?
So fun to watch the truck coming back to life! Such a fantastic job Alec with the body work and the video! 🤩❤
Thank you very much😎 Having lots of fun in the process!
i love that you started with a base truck that most people would have scrapped. you saved it from the grave!
Thank you! Yes, I knew I was going to go wild with this build so I didn't Want to cut up a nice truck👍
I've done body work on two of these styles of truck 1970 fleet side and a 1972 suburban. You did an awesome job on customising your truck and body work it looks like it's going to be a street race truck.
Thank you very much! It's a lot of work but it sure is shaping up to be a mean street/track truck👍
@@ag_trucks not a panel on that truck you haven't changed and some👍🏽🇺🇸🏁
Keep going brother your doing awsome. We all cheering for you here! ❤
Thank you! Definitely much more to come👍👍
This is the kind of work I like to see experimental, trial and error, just trying to find a result that YOU love, everyone else's opinion be damned! I'm using a similar approach on my 1970 c10 build. Just having fun with it I don't care to adhere to conventional guide lines. Because I'm not doing a restoration. I'm just building a monster of a truck that pleases me! Keep it up! Live the fenders BTW! Those are bad to the bone!
Protect your lungs dawg
Thanks for making these they’ve been awesome so far. I’m usually not a stickler for safety but even I would have worn a mask sanding the primer😂
Thank you man! Haha, I do wear my mask more often now. Should have been wearing it in the video for sure!
Looking better and better. Really enjoying your build man. 👌
Thank you! One step at a time! 👍 I'm enjoying the process!
Keep up the good work. I always enjoy seeing your videos and the progress. I like that you’re 100 percent real about what you are doing
Thank you very much! I'm just recording the process, as real as it gets👍 more to come😎
I found you channel on Instagram then watched every old video last week. Great build, can't wait to follow along
That's awesome, thanks for watching! I'll be sure to upload some more content and updates along the way! Glad you're enjoying 👍
Nice one🔥💯💪
Thank you man!
Awesome to see this build progressing from a dilapidated hulk to an awesome looking one of a kind build.
A job well done
Thank you! It's come a very long way that's for sure! 👍👍
So great to see you doing alot of the work yourself. And doing it right. Keep up the great work man. 👍 👌👌
Try to do as much as possible! Thank you very much😎👍
Keep up the great work! Your build has giving me a lot of motivation and confidence to continue to pursue my truck build!
Love to hear it! That's why I make these videos! Thank you man👍 more on the way very soon
Beautiful Car! Its low suspension wheels fit perfectly! ❤❤❤
Thank you!
Super nice dimensions on the cab.
Thank you very much!
That’s what I Suggest to some of the You tubers that does bodywork Chalk line, Powder like spray way
Give that beast a 2’’ chop it’d look mean!
SICK build.
Thank you very much!!🤙
You're an amazing craftsman
Thank you very much roger👍
Keep it up kid, loving the progress!!
Thank you very much! More videos to come!👍
Love this build man.
Thank you very much!👍
Great build
Thank you! Appreciate it👍
No slowing you down....looking great!!
Thank you!!🤙
Awesome work! 👍👌💪
Thank you man👍👍
insane work man
Thank you!!🤙
Awesome build man! i love c10's
Thank you very much!🤙
keep pushing on bro, well done
Will keep going for sure! 👍 thank you very much!
The stance on that is beautiful. NAS car style
Thank you! That's what I was going for🤙
Always excited to see a new video from you. Progress is looking fantastic.
Thank you! More to come👍👍
Lookin good !!! Little bit at a time it’s coming together. I’m doing some body work today as well ( inspection due this month lol) not quite as fancy as your work haha just patching holes. I did get a little inspiration from your work though 👍👍
Thank you Russell! It's tedious work for sure. Glad to hear I could give you a little inspiration to do some bodywork👍👍
Awesome video as always, Alec
Thank you very much Cody🤙👍
Etching primer is what you need for bare metal
I am enjoying and inspired by every video.
Glad to hear it! More to come👍
Nice work 👍😜
Thank you!!👍👍
Looks awesome bud
Thank you very much👍
Art ❤ salute 🤚
Thank you👍👍
Yesssir bro!!! Those panels are turning out great!!! Fender flares looking great and so does that high rise intake!!!! Love it bro!!!
Thank you bro!! It's all shaping up! Can't wait to see what you come up with for flares🤙
@@ag_trucks yesssss bro!!##
Nice progress, body work can be quite a slog to get through but you are making it look easy!!
Thank you! It is very tedious but I enjoy it! 👍
You are definitely making a mink stole out of a sow’s ear!
Haha exactly😂👍 thanks!
this truck needs the wagon back 😩
It would look good but too far in to change it now
Nice video.
Thanks Chris! Appreciate it👍
Flat spray paint works just as good and less mess
Good to knowl! Thanks for watching👍
So dope 🎉
Thank you man!!!🤙
First time watching and I’m subscribing
Glad you found the channel! Thank you very much!👍
New subscriber here! Awesome work man, turning out amazing. You deserve a hundredfold increase of subscribers.
Thank you very much man 👍 more and more people are finding the channel every day! Love being able to show the progress with all of you🤙
Yeah congrats
Thank you!!
Love the content
Glad you're enjoying it! More to come🤙
Not sure how you still only have 8k subscribers! Keep it up!
Thank you very much man! 👍👍
Top of Galaxy
Needs a 3inch choped top
Looking good I want a truck that year put tape over your letters to keep body filler out of them .I used duct tape
Thank you! Good tip👍👍
America 🇺🇸 💪🏼
Bro, America is from Tierra del Fuego Argentina to Alaska United State.
Looking great.
Thank you 🤙 I love how it's turning out!
How much tire clearance? Pretty sharp for your age! They will vat the block most likely to get the sand & duct tape off
The tire clearance is around 1.5 inches to the bottom of the fenders, in the video it isn't perfectly set so that's why it seems very close. Thank-you! They most likely will👍
I’m just realizing I missed this video upload by three days.
Seeing the Hi-Ram intake is exciting as fuck! Keep up with the badass updates! Looking forward to the engine assembling ! Hearing that first start with the turbos. Sheesh, I’m bout to be wet as fuck . XD
You ever just sit back and look at the truck and all of its beauty? Just watching these videos makes me think about the good Ol days of owning a C10 .
Hey man! Thank you🤙 I can't wait to assemble the engine and hear it roar for the first time😎 it's going to be epic! I always love stepping back and admiring what the truck is becoming👍 I appreciate the support and there's lots more videos to come!
@@ag_truckswhat color were you thinking of makin the truck when you come to that point? Bare metal with a clear coat? Olive Green? An original C10 color? I know you’ve talked about this in previous videos, I just can’t find the video.
Niiiice! 👍💯
Thank you👍
Just found your channel. Great work man, excited to follow the build. What size tires and wheels are you running? Looks fantastic.
Thank you very much! Welcome to the build! 🤙 Wheels are 15x10 aero in the rear with 325/50r15 nitto nt555r2 tires and up front it's vision D window 16x8 rims with 265/50r16 toyo proxes r888r
Way to roll with the punches kid. Tough setback but you overcame it
Thank you! A few set backs make for more satisfying achievements👍
First things first! I was so mad when I found your build. Not at you but at myself I have had my 69 c10 torn apart for over a year and have not made any progress. I love the flares I want to do some on mine. Can I get mor information on the crown vic swap I would like to go that route over a janky mustang 2 kit. Keep up the great work.
Thank you very much! The crown vic front crossmember was quite easy to mount since my chassis was made to fit it exactly. If you have an original c10 chassis, you would have to highly customize it and make the frame wider to adapt the crown vic front end.
@@ag_trucks thank you for taking the time. I saw the flared fenders and was instantly sold on the idea.keep up the great work.
crazy :0
Wicked job, just subbed. Im looking to do something similar. Love those flairs on the fenders, Did you fab them? Ill be watching your build from the start tonight.
Thank you very much! I did fab them up myself, I have a video showing how I did it. You'll see it once you go through the videos👍
I have a 1970 Chevy custom, got to use for 3 weeks it was a gift from my uncle sadly I had fallen asleep behind the wheel and crashed messed up the whole front grilled and both front side panel are bent but this and many other videos have inspired me to get back up on my feet and fix it back up love the work your doing bro
Glad to inspire you to fix it up! Definitely worth it👍
you putting suspension on or are you leaving it solid
I'm putting qa1 pro coilovers
👍😊
How did you unbend the tailgate?
The inner skin of my tailgate has been cut out to shave some weight so it's basically just the outer skin now. It was easy to unbend by tapping with a hammer in certain spots and applying force but it gets trickier with a factory tailgate.
Why did you use fiberglass instead of sealer on the bare metal before you primed ?
I've always had good luck with fiberglass. Wherever I weld I put some just in case so that water can't reach the bodyfill
WHT color are you going with?
I'm painting it white
U need to go with the comp turbo that is air cooled
I'll check it out!
God bleaa
Do it👉 😎🇮🇩
What ecu you going to use
Holley terminator
Bitchin aggressive profile!
Thank you very much man🤙👍
Tires and wheels size please😅😅😅😅😅😅😅😅😅😅😅😅
Wheels are 15x10 aero in the rear with 325/50r15 nitto nt555r2 tires and up front it's vision D window 16x8 rims with 265/50r16 toyo proxes r888r
Tanks bro👍🇺🇸
Hi Do you need some great lighting for your car to help you better driving, off-road? We're the pro auto lighting company for nearly 20 year and we're looking for sponsorship!
Advice joke off of you if you sell it to me you can fix it up
Beautiful truck brother… I bought delete plates from LS fab, I also ordered fender flares, going a pro street style truck, what flare did you go with this? I think I have a 3.5” flare which was moderate for the front end
I'm not sure exactly how much flare it is, it's custom made to my tires so I don't have precise measurements compared to stock. Thank you!