Sometimes there is no pink cable, but a brown cable( the brown cable I going from the head unit to canbus, you have to split it open can connect the wires all together, so the rear camera will get the power. ) all, depending on the head unit should buy.
How do you connect iPhone to that Xrons. Mine don’t connect to my iPhone, any tips or guides on that, would really help. I can’t connect through hot spot.idkkkkk😢😢
How did you get it to show the reverse camera on reverse? Did you have to fit a switch to the gear lever or did it already have the connections? Thank you!
I dont know how it works on manuals, but for automatic cars use both red wires on the camera end of the RCA. Power (red)/Trigger(red), Ground(black) need to be added to the reverse light. That circuit is energized when you put it into reverse. Side not i believe his head unit is a 12v source power, if you have a databus connection this will not work for you as you need the power to come from the reverse light to have it trigger the head unit into switching into reverse mode. hope that helps anyone.
Lovely 😊 Thanks mate 👍 👌 Great job🥃
Sometimes there is no pink cable, but a brown cable( the brown cable I going from the head unit to canbus, you have to split it open can connect the wires all together, so the rear camera will get the power. ) all, depending on the head unit should buy.
How do you connect iPhone to that Xrons. Mine don’t connect to my iPhone, any tips or guides on that, would really help. I can’t connect through hot spot.idkkkkk😢😢
What do you do about the earth cable though?
How did you get it to show the reverse camera on reverse? Did you have to fit a switch to the gear lever or did it already have the connections? Thank you!
Already has connections has a small box that communicates information like what gear your in, are the doors open etc to the screen
Do you have that loud-ass chirping everytime you go into reverse??
How did it look. Is the camera low enough to capture a full image or did the boot lip block part of the image?
Sweet dont need to tap into rear light
Hi, do this media have a CAN BUS DECODER?
Thx! at list im happy not to touch the rear-lights +- 😅
I dont know how it works on manuals, but for automatic cars use both red wires on the camera end of the RCA. Power (red)/Trigger(red), Ground(black) need to be added to the reverse light. That circuit is energized when you put it into reverse.
Side not i believe his head unit is a 12v source power, if you have a databus connection this will not work for you as you need the power to come from the reverse light to have it trigger the head unit into switching into reverse mode.
hope that helps anyone.
Hi, would this work with a Pioneer HU in a TT?
Will likely be similar but the connections / wires could be different. Your manual should state what wires are you cam in.
@@AMomentOut thanks pal
Why have you put both wires into one side of the wago. Both sides are linked so not need to do what you've done
True but at the time I had already twisted the wires together and couldn't be bothered to untwist to wago it properly.
Hi I need some help with mine not sure how to do the wiring can anyone help
Hi mate, where have you connected your ground wire to?
형제여 공장설정비밀번호 혹시알수있나요?
126
후진등에 연결없이도 작동하나요?
Yes, there is no need to take power from the reverse bulb. The power comes from the head unit.
@@AMomentOut 답변감사합니다.많은 도움이됐습니다.^^