How to properly plasti dip/blackout your car emblems | EASY DIY
Вставка
- Опубліковано 4 гру 2024
- Hi guys! Here is another quick video in which I show you how to black out your emblems. I even messed up in the video at some point so you can really relate in case it happens to you.
I’ve been familiar with dip for now 7 years so I know what I am talking about even though I am not a pro car dipper. I’ve dipped cars about 6 times with no past experience with spray painting, but trust me, plasti dip doesn’t go on like paint. It’s much more forgiving to apply dip!
If you have any comment/questions leave them down below and I’ll do my best to answer them ! Cheers ✌🏾
Tip: Spray-test on the grass, also easier to remove ;)
What's the name of that spray ?
Plastic Dip, black !
Will try on my s3!
Nice video thanks
Nice good luck bro! Rubbing alcohol if you got some instead 😎💪🏾
Can you do this with pink?
You mean the pink can of plasti dip? Yes of course ! Make sure to follow the steps in the video and use rubbing alcohol if you can find some! Go light with the first coat and slowly heavier with the next ones 👍🏾
@@lacast_lifestyle thank you !
@@ellagornerx2242 You are welcome! Sub if you want to, I just recently plasti dipped my whole car 👍🏾
May as well take the rear badge off and replace it with a new one that you've customised.
Pretty sure when mine fell off the replacement only cost £25
You def could, it costed me 5$ + I did myself and learned something ✌🏾
On Amazon it’s like 55£+, spraypaint is just 5£
Won't acetone eat the clear of your paint?
Yes it would if you apply a lot and let it sit, which is why I mentioned that you should use regular 80/90% Alcohol ! I apply barely any onto a microfiber so its fine!
Just to make it clear, when I said I was out of rubbing alcohol I meant that I couldn’t find any anywhere these days, even a couple months ago. Ofc you should NEVER used large quantity of it on your paint, but the little bit that I used, with the wind it was just fine.
when i plastidip my mercedes logo when peeling off the entire thing comes off, also on the star itself :/ it wont stick to the star and ive predip spray
How many coats did u do bro? Gotcha ! Dm me on Ig! _lacasts5_ !
Might need to apply a thicker coat, sometimes it happens no worries!
I removed and replaced my own Audi Q7 badges with a heat gun and floss.
Cool!
Don’t use acetone!
Todd Rey I said it already, in very small dose its fine, I couldn’t find any rubbing alcohol anywhere at any percent.
lacast S5 I understand. I plan on blacking out my emblems as well.
Todd Rey 👍🏾 good luck with it ! Its really quick and easy!
You can literally buy black badges on eBay for pennies.
This was 5$ and a little time. Debagging is pricier, and takes more time.