I personally love that you have been focusing more on 3D printed shoes. There are so many shoe channels and the 3D prints really makes your stand out and for that fact I have just subscribed.
I'm someone who both has large feet (15) and also has some medical issues with swelling, so it has been basically impossible for me to find shoes that fit comfortably, so I am incredibly interested in the tech behind custom printed shoes
You should maybe try barefoot shoes they are wide. of course there is that you have medical issues with your foot so maybe they aren't best for that since they don't have any support. This is just a suggestion I don't know how bad your feet are and barefoot shoes aren't maybe for that.
I applied for the Zellerfeld beta program after stumbling upon this video... Got accepted the same day! My Heron Prestons x Zellerfled 3-D Printed shoes are otw!
What if someone built a 3D printed Jordan 1, but instead of one single piece that’s pretty much unwearable, each part of the actual shoe is 3D printed and assembled
@J Not necessarily. There’s a lot of ways to reinforce them. It’s not that the materials are weaker. The infill% and pattern is going to directly affect the way the sole behaves. If you did 100% infill of TPU for example it’s essentially a solid block of rubber. There’s also dual extrusion printers that can print multiple materials at the same time. So you you could do a nylon-CF shim inside of the TPU sole for reinforcement, and energy return. It will print the shim inside the sole as the sole is being printed around it.
@J I see what you’re getting at. It would definitely have to be done correctly. There’s a lot of engineering and design you’d have to put into it to get a good result. Just printing straight off model isn’t gonna get the job done. It could resemble a regular shoe in the end, but to get there isn’t a straight path.
These are super cool, tons of possibilities. Since they already have a scan of your foot you can easily get new designs and colors made on demand if the brands were really open to it. I do wonder about the longevity of them though, how long would this, presumably, more fragile shoe last when compared to a traditional runner?
I think it's a fantastic route that is being taken, for so long there have been so many barriers into certain areas of design like footwear and this really opens up that industry to some fantastic creative designers that may never have had the platform to realise their designs
I would absolutely try them. It’s great you said breathable, however for those that live in areas where it can get to 116°F + breathability becomes a very big question. Also with high temperature areas how well will the resin print hold up,, will stay the same or become melt a little or soften. The scan of your foot provide an absolute perfect fit - but in that note - I noticed the included socks are thin like some dress socks- so would athletic socks from Nike, Puma, Under Armour, Reebok etc. be too tight to wear with them. I really like the design of them and as resin printing advances they will be able to make shoes with a mixed color palette...
The shoe kind of looks like its made from the same material as sports jerseys. Love this new idea and who knows maybe 3d printed shoes will become mainstream. Keep it up Seth so stoked for you to get 1 mil
I love 3D printing, and it's growing in concept and scope. Although I truly believe the future of footwear should be looking in the past. Handmade, natural materials, and repairable. Especially at the price points some sneakers go for.
This is why I love 3d printing. You can literally make anything that you can imagine. There’s something really satisfying watching objects appear from nothing
I’m with you on the whole “wide look” with shoes. I love “shoe” AND “car” design, and since I love wide-track performance/off-roading (Wrangler) stance on automobiles, it’s only right I like it with shoes as well. Wide whips, wide kicks, wide chics! Let’s get it!
Kinda intrigued, however I’m curious as to the degree of breathability the shoe provides for wearing it long periods of time. Other than that I think this is amazing and as always Mr. Fowler, I thank you for enlightening me 😁
In the summer your feet would boil in it. They should have also add linen and insole, it would make them a proper shoes. Still impressive, dont get me wrong, i see huge potential if the people print them for themselves, this way its way too expensive, there are much better options for that amount of money.
i 3d printed a shoe with built in toe box to avoid lasting it and did some leather upper work Maybe a 3d printed sole with leather upper work can be something u can try.
As someone that 3d prints as a business, I can easily say that 3d printed shoes will never be a thing. They're too time and cost prohibitive, just like recycled shoes
What’s interesting to me is manufacturing implications. If you can scale this process, it would probably be much faster than traditional shoe production. Also there would be way fewer people and waste involved in the process.
It won't ever be faster, since assembly lines are very efficient. but it would cut out the majority of human involvement, meaning less people in 3rd workd countries working to make them in sweat shops, which can be considered a good thing or a bad thing
It looks like there is a seam between the very bottom of the sole and the rest of the shoe, is the material itself a different hardness? It was definitely printed in multiple parts but its hard to tell visually if the material has different hardness or if it was printed in multiple parts so that there is something embedded. Obviously parts of their process probably aren't all public but if you print with a bunch of TPU you may have some shore hardness scales or just be able to tell with your finger if the top and bottom are the same. I imagine it would have to either be harder on the bottom or have an embedded harder piece of material.
what do you think of the shoe in terms of durability cause 350 dollars is steep but i feel like some people myself included would be interested if i could get my moneys worth
I do a lot of wade fishing in the summer in New River located in Virginia and West Virginia. I used to always wear in an old pair of sneakers to Wade in but putting them on the following morning especially during chilly springtime temps and walking in them to the river wasn’t very enjoyable so when Crocks first came out that quickly became my fishing shoe. Being able to take a towel and dry them with a few wipes was much better! I generally wear the model of crocks with the strap that can be tightened. The water is swift so you need something that stays securely snug to foot. A pair of these (designed with some holes in them of course), look like they would be ideal. A Super soft outsole that would give a ton of cushion for stepping and standing on hard rock all day. Just curious as to how they would hold up using them for that application. I think they would be awesome to fish in and also as a “camp shoe”!
I used to work in Solidworks in College designing keychains and shot glasses for my friends for their birthday.Las. Amazing to see how far everything has come!
6 3D printers.. that's hilarious 😂😂 it really is an addiction :p You like "wide" shoes because that's how our feet are meant to be (though generally they're even wider than is readily available, but wide is still an improvement over "standard"), no idea why pointy shoes are seen as fashionable.. I honestly like the look of these shoes though, especially given the added utility, but I feel like black socks would be best with that bright orange to complete the whole prusa look SuperVinlin
The designs are very beautiful. Being personalized is even better. but they are all one color. Almost all of the shoes produced are colored. I hate wearing one color shoes. Click on Co print
I'm very interested in the customizablity of something like this, especially with 3d scanner tech becoming more of a reality, the potential for a cheap easily made even homemade custom fit shoe is a real thing.... im looking at getting my first printer now, and this is making me want to measure my foot to compare print bed sizes.
Never heard of Zellerfeld but I did coincidentally search for Heron Preston to see if he was relevant the other day. I’m not a fan of the shoe, but I do like the way things are going.
I just recently started designing some sneakers in vr and I haven't found many people on UA-cam discussing 3d printing sneakers....I would love to get a pair made from one on my designs but I new to this and don't know how practical they would be. But I like the content
That series literally has a schedule(1 weekly video) that he’s followed since the first episode. It take stays to sell and find good sneakers so it takes a lot of time to get footage and then film. Enjoy the content and shut up
Don't worry, he will move the 20 dollar sneaker series along by selling his own shoes to himself or something to get the last 4 grand making the whole concept irrelevant, like last time
@@toogud7918 weekly is a stretch kid, he took gaps in between the last four episodes. And it takes time because he waits for you little brain dead subs to buy his shoes to feel like you’re a part of his journey, not including when he can’t even list the shoes properly to sell them. He’s more interested in 3D printing shoes that come out trash. So you can sit down and wait for him to drop some more like a good little boy
You got me sold on getting these out seth! I'm really curious on how they gonna feel. I'm glad my God brother introduced me to your videos as he's a big fan of yours. Keep up the great commentary seth!
I just cant wait until 3d printers are refined enough that anyone can buy one turn it on order a shoe and its just prints at home without any fiddling and tuning.
Really cool shoes! Just got interested in sneakers and found your channel through it and I love watching all of you diffrent types of videos! But in all that watching, there‘s a question I wanted to ask, what are those awesome pants with that ankle rubber band things? I really want a pair of these! Greetings from Germany✌🏻
I personally love that you have been focusing more on 3D printed shoes. There are so many shoe channels and the 3D prints really makes your stand out and for that fact I have just subscribed.
These 3D printed shoes are really cool! I love watching these videos, they make me want to get a 3D printer.
I'm someone who both has large feet (15) and also has some medical issues with swelling, so it has been basically impossible for me to find shoes that fit comfortably, so I am incredibly interested in the tech behind custom printed shoes
u gonna try a pair of these?
I have size 13 at 13
@@Guacarmoly i have size 80 at 80
You should maybe try barefoot shoes they are wide. of course there is that you have medical issues with your foot so maybe they aren't best for that since they don't have any support. This is just a suggestion I don't know how bad your feet are and barefoot shoes aren't maybe for that.
@@SchlaftaterNrzZz im so sorry
YESSSSS WE GOT FEET PICS
I applied for the Zellerfeld beta program after stumbling upon this video... Got accepted the same day! My Heron Prestons x Zellerfled 3-D Printed shoes are otw!
lets goooo
This 3d printed series is fire man. Love watching these!
Great to see you’ve got some Zellers!
Loving this 3d printed series!!
What if someone built a 3D printed Jordan 1, but instead of one single piece that’s pretty much unwearable, each part of the actual shoe is 3D printed and assembled
That's a great idea but what type of material that's suitable for it
Probably TPU for the lowers/mid soles, and Nylon for the uppers
Stupid😒
@J Not necessarily. There’s a lot of ways to reinforce them. It’s not that the materials are weaker. The infill% and pattern is going to directly affect the way the sole behaves. If you did 100% infill of TPU for example it’s essentially a solid block of rubber.
There’s also dual extrusion printers that can print multiple materials at the same time. So you you could do a nylon-CF shim inside of the TPU sole for reinforcement, and energy return. It will print the shim inside the sole as the sole is being printed around it.
@J I see what you’re getting at. It would definitely have to be done correctly. There’s a lot of engineering and design you’d have to put into it to get a good result. Just printing straight off model isn’t gonna get the job done. It could resemble a regular shoe in the end, but to get there isn’t a straight path.
These are super cool, tons of possibilities. Since they already have a scan of your foot you can easily get new designs and colors made on demand if the brands were really open to it. I do wonder about the longevity of them though, how long would this, presumably, more fragile shoe last when compared to a traditional runner?
They should last as long as slides/ crocs
If its made from TPU it would outlast anything a traditional shoe is made from.
I think it's a fantastic route that is being taken, for so long there have been so many barriers into certain areas of design like footwear and this really opens up that industry to some fantastic creative designers that may never have had the platform to realise their designs
I would absolutely try them. It’s great you said breathable, however for those that live in areas where it can get to 116°F + breathability becomes a very big question. Also with high temperature areas how well will the resin print hold up,, will stay the same or become melt a little or soften. The scan of your foot provide an absolute perfect fit - but in that note - I noticed the included socks are thin like some dress socks- so would athletic socks from Nike, Puma, Under Armour, Reebok etc. be too tight to wear with them. I really like the design of them and as resin printing advances they will be able to make shoes with a mixed color palette...
Probably scan with leather socks on
I see a really bright future for 3d printed shoe, I'll buy one for sure
The shoe kind of looks like its made from the same material as sports jerseys. Love this new idea and who knows maybe 3d printed shoes will become mainstream. Keep it up Seth so stoked for you to get 1 mil
I love 3D printing, and it's growing in concept and scope. Although I truly believe the future of footwear should be looking in the past. Handmade, natural materials, and repairable. Especially at the price points some sneakers go for.
This is why I love 3d printing. You can literally make anything that you can imagine. There’s something really satisfying watching objects appear from nothing
It looks like it's made out of a cartoon fish. 🤔
I love it. 😍
i’ve been loving the content
Seth you inspire me so much. Thank you for producing amazing content.
Love the new House of Dragon Crocs 🔥
Please do a month after of wearing them video so we can see the durability and longevity of the material
One guy has almost a million steps in his!
very informative and it makes sense why you’re so excited, being a designer at your core.
thx Seth
I’m with you on the whole “wide look” with shoes. I love “shoe” AND “car” design, and since I love wide-track performance/off-roading (Wrangler) stance on automobiles, it’s only right I like it with shoes as well. Wide whips, wide kicks, wide chics! Let’s get it!
The wide is not by choice it’s by necessity to prevent the sole from collapsing sideways
Zellerfeld are just insane! I would totally cop if they were more affordable 🤩
I heard their next shoe drop is $250!
@@benreif 250US$ in Canada $ 😭
Where is the link😊
@@setn7208 it’s an app, ZellerFeld app
Kinda intrigued, however I’m curious as to the degree of breathability the shoe provides for wearing it long periods of time. Other than that I think this is amazing and as always Mr. Fowler, I thank you for enlightening me 😁
In the summer your feet would boil in it. They should have also add linen and insole, it would make them a proper shoes. Still impressive, dont get me wrong, i see huge potential if the people print them for themselves, this way its way too expensive, there are much better options for that amount of money.
I love how they look, I would wear them. Cant wait to see the future of shoes and 3D printing in general . Great video keep it up!
how about breathability ? a bit afraid of becoming some sort of special grade cheese 🧀 😂
The future of 3D Printed Shoes!!! Let's go Seth!!!
i 3d printed a shoe with built in toe box to avoid lasting it and did some leather upper work
Maybe a 3d printed sole with leather upper work can be something u can try.
Oh how I wish I had a disposable income for stuff like this, I've never wanted a pair of shoes more in my life 🤣
As someone that 3d prints as a business, I can easily say that 3d printed shoes will never be a thing. They're too time and cost prohibitive, just like recycled shoes
Looks like they are a thing. Look into the future a little bit, 3D printing is in its infancy
@@benreif ok
I like the design and color well, along with the idea that one could have a wide range of colors if one wanted.
I’m wondering how they could be customized. Can they be dyed the same way as leather shoes?
They could just be printed in a different color by request when online ordering if the company offers
Really loved this video and your overall passion for 3d printed footwear. I wouldn't know much about it if it wasn't for you so thanks!
this is the future for sure, thank you for such a great and enthusiastic review.
What’s interesting to me is manufacturing implications. If you can scale this process, it would probably be much faster than traditional shoe production. Also there would be way fewer people and waste involved in the process.
It won't ever be faster, since assembly lines are very efficient. but it would cut out the majority of human involvement, meaning less people in 3rd workd countries working to make them in sweat shops, which can be considered a good thing or a bad thing
I promise you those things won't replace my shoes lmao
It looks like there is a seam between the very bottom of the sole and the rest of the shoe, is the material itself a different hardness? It was definitely printed in multiple parts but its hard to tell visually if the material has different hardness or if it was printed in multiple parts so that there is something embedded. Obviously parts of their process probably aren't all public but if you print with a bunch of TPU you may have some shore hardness scales or just be able to tell with your finger if the top and bottom are the same. I imagine it would have to either be harder on the bottom or have an embedded harder piece of material.
You inspire me a lot; and hopefully many more. You will be remembered a pioneer in this space. Buy more printers 😁
Looks crazy but grew on me through the video. Cool content that's different to the standard UA-cam sneaker videos. Thank you Seth.... Keep going!
Seth you are so close to 1M hope you get there 🔜
I was luckily able to get a pair, super comfortable. I wear them all the time and get compliments on them
nice. Greetings from the farm!
the future of jail clogs!
Imagine if when it scanned ur feet it actually took picture of them and put them all over google
Based
that desing is fire
what do you think of the shoe in terms of durability cause 350 dollars is steep but i feel like some people myself included would be interested if i could get my moneys worth
3:13 FOR FREE??????
That idubbbz meme came out of nowhere for me lolol 😂
I do a lot of wade fishing in the summer in New River located in Virginia and West Virginia. I used to always wear in an old pair of sneakers to Wade in but putting them on the following morning especially during chilly springtime temps and walking in them to the river wasn’t very enjoyable so when Crocks first came out that quickly became my fishing shoe. Being able to take a towel and dry them with a few wipes was much better! I generally wear the model of crocks with the strap that can be tightened. The water is swift so you need something that stays securely snug to foot. A pair of these (designed with some holes in them of course), look like they would be ideal. A Super soft outsole that would give a ton of cushion for stepping and standing on hard rock all day. Just curious as to how they would hold up using them for that application. I think they would be awesome to fish in and also as a “camp shoe”!
I used to work in Solidworks in College designing keychains and shot glasses for my friends for their birthday.Las. Amazing to see how far everything has come!
I see those Oregon Jorden 7 PE in the back
Chicken legs I reflect🤣🤣
I think they look surprisingly good on foot
How breathable are they compared to canvas, mesh or primeknit?
Super Kool really excited for the future of 3d printed applications from shoes to houses. Great content!!!!
6 3D printers.. that's hilarious 😂😂 it really is an addiction :p
You like "wide" shoes because that's how our feet are meant to be (though generally they're even wider than is readily available, but wide is still an improvement over "standard"), no idea why pointy shoes are seen as fashionable.. I honestly like the look of these shoes though, especially given the added utility, but I feel like black socks would be best with that bright orange to complete the whole prusa look SuperVinlin
5:35 it took him 5 and a half minutes to just unbox the shoe...
No one:
Seth: Yo here are 400 videos about 3D-printed „shoes“
Do they call these the athletes foot factories lmao 😂
I absolutely love the design of these! ❤
"Weird glove shoes that people like to go running in for some reason"
Vibram five finger review when? Haha
crocks' revenge! ftw!
Goated review
Love Heron Preston, excited to wear them
The designs are very beautiful. Being personalized is even better. but they are all one color. Almost all of the shoes produced are colored. I hate wearing one color shoes. Click on Co print
It would be cool if you managed to print some shoes in an industrial grade machine with some experts, and give us more insight on the tech
I'm very interested in the customizablity of something like this, especially with 3d scanner tech becoming more of a reality, the potential for a cheap easily made even homemade custom fit shoe is a real thing.... im looking at getting my first printer now, and this is making me want to measure my foot to compare print bed sizes.
Are they just scanning the bottom of your foot? Or building a 3D model of your entire foot?
$350! To roll your ankle in those squishy ass agent orange clogs? Nah I'm good 🤣
Those are amazing! I really love the series and i really like those shoes!
Local airbrush artists 🤑🤑🤑
hmm, so it's two pieces with some kind of pad/foam insert in the midsole?
They are printed in one go with different settings for different parts
I could imagine that in the future these could be multicolor printed and have that sort of design.
Never heard of Zellerfeld but I did coincidentally search for Heron Preston to see if he was relevant the other day. I’m not a fan of the shoe, but I do like the way things are going.
I just recently started designing some sneakers in vr and I haven't found many people on UA-cam discussing 3d printing sneakers....I would love to get a pair made from one on my designs but I new to this and don't know how practical they would be. But I like the content
Curious to know the longevity of these. And repariability.
Great looking shoe, goldfish inspired, definitely wear them to a sneaker convention
Would rather have a more simple sporty look like Adidas/Nike running shoes, but the technology in them is cool!
This guy really has more 3D Printing videos lately than the 20 dollar sneaker collection smh
That series literally has a schedule(1 weekly video) that he’s followed since the first episode. It take stays to sell and find good sneakers so it takes a lot of time to get footage and then film. Enjoy the content and shut up
Don't worry, he will move the 20 dollar sneaker series along by selling his own shoes to himself or something to get the last 4 grand making the whole concept irrelevant, like last time
@@toogud7918 weekly is a stretch kid, he took gaps in between the last four episodes. And it takes time because he waits for you little brain dead subs to buy his shoes to feel like you’re a part of his journey, not including when he can’t even list the shoes properly to sell them. He’s more interested in 3D printing shoes that come out trash. So you can sit down and wait for him to drop some more like a good little boy
@@toogud7918 another 3D printed video and 11 days since a 20 dollar sneaker collection… oof weekly 🤡
When you try and make a fleshlight and get stuck. "Uhhh I can explain!"
You got me sold on getting these out seth! I'm really curious on how they gonna feel. I'm glad my God brother introduced me to your videos as he's a big fan of yours. Keep up the great commentary seth!
these guys probably got a lot of feet pics ;)
I almost copped a pair! I wonder if this is an ever-evolving shoe 🤔
Hold on fam I gotta download my shoes update file.
where can i get these?
I can provide them to you in 9US
Never give foot shots for free man, first rule of the internet.
dont worry lol 3d printing is a hobby with a slippery slope i have four so far and dont plan on stopping
Looks like dragon scales texture, really cool
Why are they 250 bucks
I just cant wait until 3d printers are refined enough that anyone can buy one turn it on order a shoe and its just prints at home without any fiddling and tuning.
What is the material?
Looks like Reebok had a kid with Crocs And1
finally, crocs 2.0
Seth really going out his dogs for free
Where to buy?
This is so sick, I like the look and I think is really eco friendly just 1 material easy to re use it
Is the packaging recyclable
Really cool shoes! Just got interested in sneakers and found your channel through it and I love watching all of you diffrent types of videos!
But in all that watching, there‘s a question I wanted to ask, what are those awesome pants with that ankle rubber band things? I really want a pair of these!
Greetings from Germany✌🏻
The point of video is that he is a marketing selling the public replacing what we have with trash.
*270$ for galoshes bruh, but looks not bad*
$350 Crocs... Lol