Good video; was wondering if this led headlight switch will work on a 06' is250 awd, with luxury package? (I've seen in other videos stating you can't)
was the headlight bracket different or did you reuse the one from the 08 isf. I have a set of 2013 Isf headlight complete with ballast and everything I was wondering if they were Plug n play or if you had to rewire something to get them to function.
You probably dont care but does anyone know of a tool to get back into an instagram account..? I somehow forgot my password. I would love any assistance you can offer me!
@Jaxx Damien Thanks for your reply. I got to the site on google and I'm in the hacking process atm. Takes quite some time so I will reply here later with my results.
sick videos man! thanks! I did the afs delete too. I just don't have leds working in my headlights, it wasn't plug and play in my '08. I'm not good with wiring either lol. yours worked right away? or was there some wiring done?
Thanks for the step by step. Question though, if I have the full harness and brackets from the 2013 headlight - is it a plug and play? Or do I still need to swap bulbs and harness?
Did you ever get a Answer I'm in the same boat I have a 2009 ISF and a set of 2013 ISF headlights complete was wondering if they were just plug and play or if you need to do something to get them to work?
I have a 2008 Lexus IS 250 and installed the oem led headlights with plug & play wires but in daylight still turns on the halogen high beam DRL. I want my headlights tu turn on the led strip (check mark) as DRL, how can I do this like oem 2012?
Recently had my RCF replace both triple beam leds headlamps by dealer. Is there anything within this process that can cause battery problems? Been having a lot of battery draining issues overnight.
What about bumber supports? No problem with alignment? I've installed 2014 oem brand new headlight to 2009 isf and have this small gaps just between headlights and the bumper. I've read somewhere that bumber supports also need to be replace. Anyone can confirm this?
wow. so all you have to do for an 08 to 2011-2013 headlight conversion is to swap the ballast? nothing else was required to run the DRL? thanks for the video
+Jangco Doesn't Even I do believe they were rewired to run as DRL when the parking lights are turned on. You would also have to go to lexus to turn off the DRL options if you dont want the highbeams to be running as DRL and instead, the LED's would run once parking lights are set on.
+Kantstandlam Garage So they don't work like an OEM car then? That's a bummer. Does the auto level and direction steering aim work as it should? is there a way to wire the LEDs up to work just like an OEM 13-14?
Thoes light look good if you don't mind can you do top 5 mods for your Lexus ISF because I will be getting mine next month and I can use some pointers💪🔥🔥
Dude I need your help I have the factory hid/xenon headlights and the right one the high beam doesn’t work so I’m thinking of getting new headlights but I need your help on where I can get them from
Hello, I have an 2010 IS-F, in your opinion which headlights would work best and fit the best for my year vehicle. Also, where do you recommend purchasing an affordable set? Thank you! and good job.
2013 with the lines indented in the lens. They are claimed to be the brightest as well as with the black chrome housing. But they are really expensive these days.
so if I go to my local junk yard and find a decent 2013-14 headlights ... how do I activate the LED Stripe did you do some rewiring ? if so where and to what?IS 250 2008
Hey Anthony did you ever figure out how to activate the LED strip??? I’m having the same issue. I recently upgraded my 2008 headlights to 2011. But the LED STRIP WILL NOT TURN ON. Any suggestions??
is the same way for a 2012 lexus is 350 ? to replace the ballast i want to installed a 55 watts ballast instead of the 35 watts that comes with the car ,
Very thorough video bro! Might do this to my ES350. Doesn't seem to bad after seeing you do it. I heard those after headlights get alot of condensation in them, hope not after all that fuckin work.
That's cheap for a pair Ive had to replace both sides on my ISF due to condensation each time it was around $1100. I wish I knew about these LEDs being possible back then I would've swapped this instead
What a logic replacing very reliable Panasonic HID with unknown LED. HID in Lexus is 3x brighter than most LED and 10x lifespan than any Aftermarket LED.
Fuck that’s a lot of work just to look “cool” with the led drl😂 reminds me of the Chris Rock “spinner rims” joke you don’t even see them spinning lol you don’t even see your fancy led drl’s only other people do haha Also: Do u have to take off the whole bumper just to change a bulb?😳
Was gonna get aftermarket headlights and put them on my IS, after watching this video, i have changed my mind.
IS Gang facts lol
LEXUS HID is much brighter and last 10x longer than unknown LED
@@rondhole but the ballasts are dogshit.
The 2008 model turned into a 2013 model! Looks good. Your camera recording is very professional showing all details of the steps. Good job bro
Best freaking how to video!!!! Thank you for making this👍🏼🦾🦾🦾
Sweet ride bro 👏
Hey Lam-Is the wiring harness already included on the new headlight housing?
where did you get your 2013 led oem headlights ? Mine is is250
Do you have to do anything with the wire harness when installing 2013 to 2007?
Thank you for video, very helpful.
Good video; was wondering if this led headlight switch will work on a 06' is250 awd, with luxury package? (I've seen in other videos stating you can't)
was the headlight bracket different or did you reuse the one from the 08 isf. I have a set of 2013 Isf headlight complete with ballast and everything I was wondering if they were Plug n play or if you had to rewire something to get them to function.
Hey any resources you know of that outline the re-wiring required to activate the LED strip? Thanks!
You probably dont care but does anyone know of a tool to get back into an instagram account..?
I somehow forgot my password. I would love any assistance you can offer me!
@Roman Randall Instablaster :)
@Jaxx Damien Thanks for your reply. I got to the site on google and I'm in the hacking process atm.
Takes quite some time so I will reply here later with my results.
@Jaxx Damien it did the trick and I finally got access to my account again. I'm so happy:D
Thanks so much, you saved my account!
@Roman Randall glad I could help =)
sick videos man! thanks! I did the afs delete too. I just don't have leds working in my headlights, it wasn't plug and play in my '08. I'm not good with wiring either lol. yours worked right away? or was there some wiring done?
Thanks for the step by step. Question though, if I have the full harness and brackets from the 2013 headlight - is it a plug and play? Or do I still need to swap bulbs and harness?
Did you ever get a Answer I'm in the same boat I have a 2009 ISF and a set of 2013 ISF headlights complete was wondering if they were just plug and play or if you need to do something to get them to work?
@@HugoOrnelas1 from what ive gathered, they need to be repinned.. but i haven't found a consistent method!
What is the reason for swapping the lights and ballast? Why can you not run the later 2013 lights in the 2008?
Can you use the 2011 bracket in the 07??
awesome video!
Is the same way if I want to replace 09 headlight with 12 led headlight? Should I need to modify the wire connection or something else?
Hey man I have an 08 and got 2012 headlights is it direct plug and play... would led strip light on
Was it plug and play ?
?
Do they have these for the 2008 ls460? If so, Where can I get them?
I have a 2007 lexus is250 I just bought a set of 2013 Isf lights how do I get the led to work
I have a 2008 Lexus IS 250 and installed the oem led headlights with plug & play wires but in daylight still turns on the halogen high beam DRL. I want my headlights tu turn on the led strip (check mark) as DRL, how can I do this like oem 2012?
Recently had my RCF replace both triple beam leds headlamps by dealer. Is there anything within this process that can cause battery problems? Been having a lot of battery draining issues overnight.
What about bumber supports? No problem with alignment? I've installed 2014 oem brand new headlight to 2009 isf and have this small gaps just between headlights and the bumper. I've read somewhere that bumber supports also need to be replace. Anyone can confirm this?
I just found the channel and it's great. Where did you find your headlights?
would i need to do the same thing if i have a 2006 and wanna put on 2012 oem headlights
wow. so all you have to do for an 08 to 2011-2013 headlight conversion is to swap the ballast? nothing else was required to run the DRL? thanks for the video
+Jangco Doesn't Even I do believe they were rewired to run as DRL when the parking lights are turned on. You would also have to go to lexus to turn off the DRL options if you dont want the highbeams to be running as DRL and instead, the LED's would run once parking lights are set on.
+Kantstandlam Garage So they don't work like an OEM car then? That's a bummer. Does the auto level and direction steering aim work as it should?
is there a way to wire the LEDs up to work just like an OEM 13-14?
Liking your videos, can you do some on maintenance and any issues?
Thanks so much for this video bro!!!!!!!!!
So these are stick headlights from a is350 not an isf? I am assuming you do not have afl any more.
For the 09 is250 do you need to change the ballas?
Thoes light look good if you don't mind can you do top 5 mods for your Lexus ISF because I will be getting mine next month and I can use some pointers💪🔥🔥
Dude I need your help I have the factory hid/xenon headlights and the right one the high beam doesn’t work so I’m thinking of getting new headlights but I need your help on where I can get them from
damn that looks good.
what kind of bulb is the turn signal on the 08 headlight? 7440?
Do you know what is the bulb type for the DRL LED lights?
Hello, I have an 2010 IS-F, in your opinion which headlights would work best and fit the best for my year vehicle. Also, where do you recommend purchasing an affordable set? Thank you! and good job.
2013 with the lines indented in the lens. They are claimed to be the brightest as well as with the black chrome housing. But they are really expensive these days.
where did you buy your headlights ebay? if so what seller id like to buy these ?
How much did it cost for both headlights?
Where did u get the headlights
No AFS issues? Bought mine with 2011 headlights installed and “AFS OFF” won’t stop blinking
Pull the fuse.
how much were the new headlights btw??
Will the 2013 headlight fit the 2012
so if I go to my local junk yard and find a decent 2013-14 headlights ... how do I activate the LED Stripe did you do some rewiring ? if so where and to what?IS 250 2008
Hey Anthony did you ever figure out how to activate the LED strip??? I’m having the same issue. I recently upgraded my 2008 headlights to 2011. But the LED STRIP WILL NOT TURN ON. Any suggestions??
Lol did your local junk yard have a set?
No relay or resister needed? how about wiring? simply just pair of headlight and plug and play?
Fantastic 👌🏻
is the same way for a 2012 lexus is 350 ? to replace the ballast i want to installed a 55 watts ballast instead of the 35 watts that comes with the car ,
Carlos j should be the same tbh. My headlights came from an IS350
well done
Very thorough video bro! Might do this to my ES350. Doesn't seem to bad after seeing you do it. I heard those after headlights get alot of condensation in them, hope not after all that fuckin work.
so you need the ballest for the new lights? also link to the ones you have
You can swap everything over and it fit. You just need to buy a few more things.
Lam Le what else do you gotta buy
This wont work on cars with afs
would this fit on my 09 is 250?
genius sweet work!
i swap the lights into my 2008 but the light beam doesnt turn on . afs light is on too .
can this work on a 2006 IS 250?
I want the celica in your garage how much for it.
Why your brotha sell that IS-F?
new wiring harness required???
New would cost a couple grand. But no, you just have to reroute some wires.
ok thx!
Lam Le
Do you know which wires need to be rerouted?
Nice fucking car my dude, my dream right there...
like your vids man can i put the same headlights on a 2010 is250 ???
Yeah, should be all the same.
how to bypass the afs??
No way of really bypassing it. You just need to cover the light in the cluster or pul;l a fuse.
ua-cam.com/video/4pnOxKiSSdw/v-deo.html
where u shop lamle
Version 2 are better cause u can make the led way brighter
ok cool thanks ,,, for the info ,
Nice
how much did you pay for your 2013 oem headlights?
I got them at around $950 shipped but prices have since gone up on these for some reason. You could spend upwards to $1600 for a good clean set
That's cheap for a pair Ive had to replace both sides on my ISF due to condensation each time it was around $1100. I wish I knew about these LEDs being possible back then I would've swapped this instead
why is it bubbling ?
Heat from the light
would i have a problem installing them on my 2011 is250? or no?
Naw you shouldn't to be honest.
What a logic replacing very reliable Panasonic HID with unknown LED. HID in Lexus is 3x brighter than most LED and 10x lifespan than any Aftermarket LED.
Fuck that’s a lot of work just to look “cool” with the led drl😂 reminds me of the Chris Rock “spinner rims” joke you don’t even see them spinning lol you don’t even see your fancy led drl’s only other people do haha
Also: Do u have to take off the whole bumper just to change a bulb?😳
Very cool👌
Can i do this on a 2006 is250?