This was a very well thought out and executed video. The instructions were clear and concise, and the on-screen visual markers for the fastener locations were extremely useful and accurate. Definitely one of the better "how-to" videos on the Tube.
Very good video. I have issues with my bumper. It doesn't seat properly and got a small gap on the top side below the headlights from both side. Can you advise what may be the problem?
Hello, do you know what the second small connector on the headlight is for? There’s the main harness connector and then there’s a small 4 pin connector. It’s the 4 pin that I am unsure about
How come they haven't replied I'm on this same issue in the video it looks like it just stays tucked away a video of how there suppose to properly function would be nice
What kind of ballasts do these LED lights have? I heard the headlight unit without ballasts directly wire to the battery terminal are better and avoid ballast issues like the OEM ballast. Help!!
I just put these lights on my 09 is250 and they look amazing! But since I put them on my afs off has been non stop flashing. My auto lights work so I don't know why I have the afs off sensor on.
The headlights have nothing to do with the fog lights. The DRL function has changed. You can skip towards the end to see the before and after video (around 5:28).
This is an extremely ridiculous amount of work to replace lamps that need to be replaced yearly. Removing a bumper? Seriously? You guys gotta be kidding me.
I would get them, if my lights were yellowed and/ or internal cracking on the lense or factory housing. I refuse to pay over 1k per side for Factory HID lights....IF you can even find them for sale.
Don’t normally comment but this has to be the most precise tutorial I’ve ever watched!!
This might be the best tutorial ever
This is so well done, totally clear and easy to follow !
This was a very well thought out and executed video. The instructions were clear and concise, and the on-screen visual markers for the fastener locations were extremely useful and accurate.
Definitely one of the better "how-to" videos on the Tube.
Awesome video thank you very much I'm about to go at it. But this looks very straightforward good explanation. Thank you again for posting.
You guys did an amazing job at laying out the steps for this!
Thanks for the step by step tutorial. Simple and clear instruction made it very easy to make the headlight change
Yo this tutorial is well planned and thought out. Might be the best by far good job 👏 it made my transition very smooth and easy 👌
5:28 But the new headlight is less brighter than the original
A direct link to purchase would be nice.. 🙄
can you change the bulbs on these headlights?
Very good video. I have issues with my bumper. It doesn't seat properly and got a small gap on the top side below the headlights from both side. Can you advise what may be the problem?
Excellent good job 🙏
I replaced my headlight now getting warning check headlights system what is the solution kindly guide me
Best video ever ... you guys rock
最近これと同じもの取り付けましたシンプルで気に入っています、私は日本から
Can i use my after market h11 9006 hb4 hid kit with these new headlights?
Hello, do you know what the second small connector on the headlight is for? There’s the main harness connector and then there’s a small 4 pin connector. It’s the 4 pin that I am unsure about
Here tryna find the same thing lol
Me too lol
In one of their previous videos they mentioned it was the outside temperature sensor but I can't guarantee if that's correct or not
How come they haven't replied I'm on this same issue in the video it looks like it just stays tucked away a video of how there suppose to properly function would be nice
You're basically taking the whole front car apart for some headlights???
Thank you, nice job.
If my car is xenon headlights will this work
Can't you do this without removing the bumper
What kind of ballasts do these LED lights have? I heard the headlight unit without ballasts directly wire to the battery terminal are better and avoid ballast issues like the OEM ballast. Help!!
i dont think led lights require ballasts
Just save me some moolah bro 💪🏽
Can I install 2012 is250 model headlights to my 2009 is250? Are they the same housing and parts?
Thanks great video
What can i do , if my led protector was broken down?Can I repair it ,or i need to buy a new one ?
Sorry, I do not understand your question.
Does it required to disable AFS function?
Sorry, typically if the car has AFS for this generation of Lexus IS, it also has HIDs. These lights do not fit those models.
Can you replace headlight bulb with led?
Do I need to install an antiflicker...?
Not sure what you are talking about. We installed these in this video and the car's owner has no problems with it.
Resistors.??
made a video as it can be seen in the evening
I've got a 2005 is250 will this work the same?
Yes, it will work the same.
Cool video, thank you
Does anyone know how to replace a bulb if it goes out in on this unit
Can i swap my old hid xenon for these led headlights?
If your car came factory equipeed with HID, it will not work.
+Spyder Auto So disappointing too know, because I wanted too get these on my 2010 model.. oh well life goes on....😫😫😫
@@spyderauto why won’t they work? I brought some use, what can I do to make them work?
I just put these lights on my 09 is250 and they look amazing! But since I put them on my afs off has been non stop flashing. My auto lights work so I don't know why I have the afs off sensor on.
theres a fuse under your steering wheel that you can pull out and the light will go away. its a brown 7.5 fuse, theres a video on how to do it
Did you have the factory xenon hid headlights?
@@slomar400 I had the factory headlights before these
Ross do you have a link on where you gy o your lights. I have a 09 also.
@@rossharris3239hello we’re they HID from factory or lef
That headlight fit on 2010 is250 awd?
Where do you get the headlight ?
show very clear.
How much are they for a set ??
wow what a huge hassle just to replace headlights I am not looking forward to doing mine
good job
How much are those? And is tge price shown online for 1 light or the pair?
400 for both
Why don’t these fit ones with factory HID? Doesn’t It remove the ballast completely
These headlights are not wired for the factory HID setup.
Spyder Auto so can i not change them to LED lights?
Nice..
Is it the Same procedure to replace the bumper on a 2012 250?
yes
Did the fog lights work after the swap out?
The headlights have nothing to do with the fog lights. The DRL function has changed. You can skip towards the end to see the before and after video (around 5:28).
Spyder Auto this is incorrect, the fog light harness comes out of the headlight and it isn’t the same connector as my stock fog lights on an 08 AWD
where do i buy thwse
Carid. com
How do you adjust the aim of the headlights
Please take a look at our website for pictures showing where the adjusters are located. Thanks.
@Aroldo Franco took them off and on and off and on:/
@@jesusrubalcaba6578 did you get them adjusted correctly? im still having trouble with mine
@@otiliocar taking them off and on for the left one
make sure to double the salary for whosoever created and edited this tutorial.
Those blinkers make it look cheap
This is an extremely ridiculous amount of work to replace lamps that need to be replaced yearly. Removing a bumper? Seriously? You guys gotta be kidding me.
It’s how most cars are. It’s the way it is. You either leave them or do the work.
Who the F would replace the Original HIDs to them cheap ass basic headlights 🤦🏻♂️
The D4S Philips xenon bulbs are driving me nuts. I change a pair each year and they are not cheap! I wish Lexus could provide an LED replacement!
I would get them, if my lights were yellowed and/ or internal cracking on the lense or factory housing. I refuse to pay over 1k per side for Factory HID lights....IF you can even find them for sale.
My turn signal bulb on the right went out . Were can I purchase the bulb . And also what leds can I install to this ?
I have a base 2008 Lexus IS250 will these spyder headlights work?
Yes, it should work just fine.
will this fit on a 2010 IS 250?
did you not watch the video