Full review of the Peopoly Magneto X This video has been long overdue, but I am happy to finally be able to share my thoughts on this unique 3D printer
Hey guys my cooling modification for the electronics is finally finished. Here is the link to the files and parts list over on Printables! www.printables.com/model/911028-peopoly-magneto-x-electronics-cooling
Glad to help. This is the first time I have ever tried to make a review video so I apologize for any lack of quality or weirdness in it. I am not super comfortable in front of the camera! haha.. Thanks for watching!
I think I fall into that last category of being able to fix this printer. I have done a number of mods and so far I am loving it. My mods still need a ton of polish before they are ready for the public though.
Thank you for this review. I believe in Peopoly as well and together with the great community the X will be a very fast, reliable and unique printer in future.
I guess I'm lucky as I haven't had any of these issues. I do have bed mesh set to run just for the print area before it prints and I had the clicking from the extruder (Peopoly sent me a new extruder and its been great). Its been the most plug and play printer i've ever had.
Really happy for you that you got a good one. I finally had mine working pretty good and was getting ready to make a follow up video, but unfortunately I had a new problem pop up with my 24v psu. It's working again, but I absolutely do not trust this machine to operate unattended anymore.
What complicated belt tensioning have you had to do on the Bambu? Curious, I have over 5000 hours on my x1c and have only had to tension belts once, and it was like 5 minutes to do so.
Some people have had relatively good luck fixing the belt tension, but spend enough time in various forums and you will find that most people have a very difficult time with it. The instructions Bambu Lab provides tends to give very mixed results. My P1P is almost always printing 24/7 so I have had to do it a few times already. It really is a very hit or miss process. That being said they are very good printers that I personally recommend to most people when they ask me what to buy for their first printer
That sucks you went through all those problems. Every printer I have purchased over many years went like that. Except for the X1C. But I did wait to get the X1C until after it had been out for a year. I don't think I'd ever be an early adopter on any 3D printer again. Too annoying. I just want to print. Thanks for sharing your experience. Maybe in a year, the Magneto will be "worked out" enough for me to get one. I do love the idea of what they are going for.
I normally don't like doing the whole early adopter thing, but I wanted a larger format printer, and couldn't resist the pre-order price. I feel sure within a year the Magneto X will be in a much better place. Considering Peopoly has never made an FDM printer before, the problems we have been having so far are a bit expected. Working on this printer has brought up old nightmares of dealing with my Tevo Tornado! Not a pleasant experience to be reliving!
Seriously, the X1C is the only FDM printer I've had that worked perfectly out of the box, and I also waited a year after release to buy it. I'm afraid that by the time the Magneto gets the kinks ironed out, a new large format printer with tool changer will be available. Hopefully Bambu's upcoming XL printer will have linear rails and a tool changer....
an amazing review. big youtubers should take note. everything i have seen from them about this printer was super bad. you earned your sub and like for sure. good job mate, keep it up
I really appreciate the compliment. I haven't done any video work in a long time and was a bit all over the place during recording and editing. Definitely not "like riding a bike" haha. The Magneto X is in a bad place now, but the community is making improvements almost everyday! Even Bambu Lab had a few hiccups when they first launched (although admittedly not as bad as Peopoly). Give us a few months and I'm sure this printer will be worth it! Thanks again for the support!
It is interesting my printer arrived in May and has be very reliable and robust. In an industrial setting sending data to a cloud isn't an option. It appears the washers were not on my load cell no clicking or under extruding. The only issue I have had is not being able to get abs to stick however my enclosure just shipped so hopefully that helps that issue. If peopoly did make changes and push them out that quickly it would be impressive.
Peopoly has actually been pretty good at making changes in a very quick manner. It would not surprise me if they did manage to make changes and push them out that quickly. I did not have any clicking from the extruder in the beginning. It happens over time from the vibrations causing the set screw to come loose. They may have already started adding thread lock to the set screws before your printer shipped out to you.
I was wondering where the Magneto X went. Lots of hype but it basically disappeared. When they couldn't get a working printer to trade shows that was enough for me to write them off. Thanks for the review and all the work and info you put into it.
If I remember correctly, they had originally started showing it off back in August 2023. It was supposed to have been released sometime in November or early December but they quickly realized that they had a lot more work to do than they had initially thought. That's why we really didn't hear much from them after September. I think the main problem just came down to Peopoly not having the required experience in FDM to produce something as complex as the Magneto X. The overall building blocks of a good printer are there, it just needs a lot of little tweaks to get everything working as it should. Given how complex the Magneto is, I think Peopoly did an overall decent job, but they really should have done more internal testing rather than dump that job on the pre-order customers. Thanks for watching!
@@makerscorner93 I agree its not ready and with the high price tag that tends to leave a bad taste in peoples mouth. This might have been good 10 years ago when tinkering to get printers working was ok but know the standard is 15 minute setup and producing quality prints quickly. They have a lot of work to do.
I have had some first layer issues, but, I know for a fact my belt tensions are perfect. At present time - I am upset that I seem to be accounted as a "Beta Tester" when my unit wasn't a beta unit- but a mainstream sold unit. It's good I get similar support, replacement parts and the like - but it's horrible if you .. want to print and there is an issue, after all - spending hours disassembling and then replacing parts or reassembling screws, is timely and pretty frustrating. (at current time, I am awaiting the new loadcell version as well as a Y-motor, as my print issues have just.. been horrific.)
Yeah you have the most cursed one! Definitely worse than mine. Been following most of your struggles on the discord.. Peopoly should really just send you a new one at this point!
Seems like a lot of startup issues that can get cleaned up as orders increase. I think this printer belongs into the large format space somewhat justifying the price. I am curious who the manufacturer of the linear motors. I thought Peopoly mentioned the potential sale of these motors in the future. That would suggest that they are the manufacturer (which seems very unlikely). any ideas?
Some people had asked if they would consider selling just the motors. The response they all got was the very corporate "we will take your suggestion into advisement". Translation, probably not gonna happen.
Great review, I am actually looking at this printer as an option still to replace my X1C (I want a larger frame and not have to send my files over the other side of the world). However, I need reliability as even after a year 3D printing by myself, my tech skills only go as far as changing the nozzle/printhead.
The foundation of a good printer is there. It just needs a bit more polish. Thankfully the problems are slowly but surely being solved. I'm hopeful that between Peopoly and the community working together we will have Magneto working beautifully soon!
@@AwwwSnapperz I should have worded that better. It is true you aren't forced into using the cloud, but the majority of the people using those printers aren't aware of that. The overwhelming majority of people are very basic users who might not realize there are other ways to start a print. I will be more careful in my wording next time.
Great review. Printer with lots of potential. 5 great prints. Then problems start. Link to peopoly discord gives an invalid address. Can you -please post a link to a reliable discord? Thanks!
6:21 "unlike other popular 3d printers out there, that basically force you to upload all your files to their cloud just to start a print" It's been 2 years since Bambu lab first launched in 2022. You have NEVER been forced to use the cloud to start a print. Sd card, lan only , even sending files over local FTP is an option.
Yes there are other options however SD card is a pain in the butt and means no remote starting of a print, LAN only mode as I had mentioned in the video is not as secure as most people think as Bambu Lab has been caught in the past still scrapping data from people using that option, and while FTP is an option, it is not one that many people are even aware of. I used to use FTP but found it to be slow and generally unstable. Don't get me wrong, I love my P1S but I will never blindly overlook obvious flaws just because I like a particular machine or company.
@@makerscorner93 I have to disagree. When the printer is in LAN only mode it does NOT leak/send out data. I have run checks both at the router level as well as wireshark. You can check it yourself. Heck if you are extra paranoid you can disable net access from any modern router at the client level. I dont blindly believe any company or any person who hasn't shown proof of their assertions, so I ran my own tests. Whether you are on a Vlan, normal router or one that is completely disconnected you can run Lan only mode. I frequently do it at local trade shows with a pocket router with no net access. There was a ytuber saying much of the things you mention and he was incorrect but he did it on a site that knew he was nowhere near an authority on the subject. and he could not answer let alone prove anything as network traffic can be at the very least monitored even if you cant view its contents. Even the crew behind x1+ who had access to far more of the inner workings confirmed what I already knew. You can run the printers without Net access, it does not send out data unless the user initiates it, and you dont need the cloud for it to work.
You are speaking into the void. that cloud thing has circled the globe and back several times and even after evidence showing it is 💩 people double down on false info.
Oh you're the one working on the cooling thing, I'm really looking forward to that because that 48v power supply fan noise. A solid covering of the highs and lows so far. I've been good after replacing my load cell and toolhead board, but haven't printed a lot that isn't calibration prints since that. Hoping to do a bed mesh at my normal PLA bed temp and printing some other actual things this weekend. Once I've got that baseline I'll definitely be looking at some of the .cfg updates that folks have put together. Also will see how changing probe accuracy to .025 goes. It really seems a bit hit or miss with the QA on units that have gone out. As you said there's been plenty of people with issues, but some folks have been having a good time with theirs. Other than the possibly self-inflicted loadcell sensor probe issue I've been okay, fingers crossed that holds. I have my corner screws tight until the springs weren't springy any more, I'll keep your tension tip in mind if binding issues show up as I print taller things.
Yep I'm that guy! Haha. I am hoping to print and test my "V2" design tonight. If all goes well, I will post links to where you can download the files. The .cfg video will most likely be coming out next Friday. Want to make a few more tweaks to mine before recording that video. QA on the Magneto X has been super hit or miss. I agree there are a few lucky ones that got printers with zero problems, but the majority of us were not as lucky. Heck I'm thankful that my problems are on the easy side of things! There are some people who have had to completely disassemble their printers multiple times already!
I was worried about this. I wish they had just released the linear motors in some common sizes and let the community have their way with them. Releasing a whole printer just risks tarnishing the whole system or killing the company because of simple mistakes. I dunno maybe that wouldn't have worked but this is less than ideal.
They were a little too ambitious considering this is there first attempt at making an FDM printer. I feel confident that they will solve most of the problems over time
Unfortunately not enough footage of the machine actually working yet lol. I have my machine finally in a mostly functional state now (after a long 2 months of troubleshooting) so I plan on doing a follow up video with a lot more footage of the actual machine. I mainly wanted to get some information out there since Peopoly is now selling to the general public and I wanted people to be able to make an informed decision whether or not to purchase it.
review?? you literally showed like 10seconds of the printer on screen....sorry, but I don't wanna see your face for 20min on a product review, I wanna see the product.
You are correct, there wasn't much showing the actual machine. I've had this printer for a few months now and unfortunately don't have much footage of the printer actually working. For that matter, there isn't much footage from anyone of the printer working due to all the issues we have been having with it. Peopoly recently opened up sales to the general public and I just wanted to get some actual information out there for people to be able to make an informed decision if they decide to purchase a Magneto X. I have two more videos planned for the Magneto X in the coming weeks which will have much more footage of the actual printer.
$2000 and it isnt a consistently functional product. 🤦 Thank goodness for testers, volunteers, and lets be honest , suckers who dedicate their time, money , energy and labor to fix a multimillion dollar companies products. This is one of the strengths and flaws of the 3d printer community. These financial juggernauts are offloading R&D, testing, safety, labor, liability and other costs to the users instead of shipping a fully functional product.
Glad to be one of those "suckers" so others don't have to be! lol.. Honestly Peopoly jumped the gun on this one. They really needed more time to smooth out all the rough edges. Hopefully this will be a learning experience for them, as much as it is for us. Thanks for watching!
Just saying, they're not a multi million dollar company. I think there's about 6 employees aside from people doing the assembly, and even then I think that's only 4ish more people. It's a small team that doesn't have a ton of profit, especially as currently they are sending out upgrade/replacement parts free to current magneto owners, which is really great of them, but they're no prusa or bambu in scale
Hey guys my cooling modification for the electronics is finally finished. Here is the link to the files and parts list over on Printables! www.printables.com/model/911028-peopoly-magneto-x-electronics-cooling
Paying to beta test is always rough. Solid review.
It has been a painful and expensive journey being a "paying beta tester", but hopefully in the end it will be worth it!
I've been waiting for a good review of this thing. Thank you.
Glad to help. This is the first time I have ever tried to make a review video so I apologize for any lack of quality or weirdness in it. I am not super comfortable in front of the camera! haha.. Thanks for watching!
Way better than my videos.
I think I fall into that last category of being able to fix this printer. I have done a number of mods and so far I am loving it. My mods still need a ton of polish before they are ready for the public though.
Yeah you definitely have enough knowledge to fix some of the problems we have been experiencing. Weird seeing you outside the Discord haha 😂
Thank you for this review. I believe in Peopoly as well and together with the great community the X will be a very fast, reliable and unique printer in future.
I agree 100% it may take a bit of time, but we will definitely get there!
I guess I'm lucky as I haven't had any of these issues. I do have bed mesh set to run just for the print area before it prints and I had the clicking from the extruder (Peopoly sent me a new extruder and its been great). Its been the most plug and play printer i've ever had.
Really happy for you that you got a good one. I finally had mine working pretty good and was getting ready to make a follow up video, but unfortunately I had a new problem pop up with my 24v psu. It's working again, but I absolutely do not trust this machine to operate unattended anymore.
What complicated belt tensioning have you had to do on the Bambu? Curious, I have over 5000 hours on my x1c and have only had to tension belts once, and it was like 5 minutes to do so.
Some people have had relatively good luck fixing the belt tension, but spend enough time in various forums and you will find that most people have a very difficult time with it. The instructions Bambu Lab provides tends to give very mixed results. My P1P is almost always printing 24/7 so I have had to do it a few times already. It really is a very hit or miss process. That being said they are very good printers that I personally recommend to most people when they ask me what to buy for their first printer
That sucks you went through all those problems. Every printer I have purchased over many years went like that. Except for the X1C. But I did wait to get the X1C until after it had been out for a year. I don't think I'd ever be an early adopter on any 3D printer again. Too annoying. I just want to print.
Thanks for sharing your experience. Maybe in a year, the Magneto will be "worked out" enough for me to get one. I do love the idea of what they are going for.
I normally don't like doing the whole early adopter thing, but I wanted a larger format printer, and couldn't resist the pre-order price. I feel sure within a year the Magneto X will be in a much better place. Considering Peopoly has never made an FDM printer before, the problems we have been having so far are a bit expected.
Working on this printer has brought up old nightmares of dealing with my Tevo Tornado! Not a pleasant experience to be reliving!
Seriously, the X1C is the only FDM printer I've had that worked perfectly out of the box, and I also waited a year after release to buy it. I'm afraid that by the time the Magneto gets the kinks ironed out, a new large format printer with tool changer will be available. Hopefully Bambu's upcoming XL printer will have linear rails and a tool changer....
an amazing review. big youtubers should take note. everything i have seen from them about this printer was super bad. you earned your sub and like for sure. good job mate, keep it up
I really appreciate the compliment. I haven't done any video work in a long time and was a bit all over the place during recording and editing. Definitely not "like riding a bike" haha. The Magneto X is in a bad place now, but the community is making improvements almost everyday! Even Bambu Lab had a few hiccups when they first launched (although admittedly not as bad as Peopoly). Give us a few months and I'm sure this printer will be worth it! Thanks again for the support!
It is interesting my printer arrived in May and has be very reliable and robust. In an industrial setting sending data to a cloud isn't an option. It appears the washers were not on my load cell no clicking or under extruding. The only issue I have had is not being able to get abs to stick however my enclosure just shipped so hopefully that helps that issue. If peopoly did make changes and push them out that quickly it would be impressive.
Peopoly has actually been pretty good at making changes in a very quick manner. It would not surprise me if they did manage to make changes and push them out that quickly. I did not have any clicking from the extruder in the beginning. It happens over time from the vibrations causing the set screw to come loose. They may have already started adding thread lock to the set screws before your printer shipped out to you.
I was wondering where the Magneto X went. Lots of hype but it basically disappeared. When they couldn't get a working printer to trade shows that was enough for me to write them off. Thanks for the review and all the work and info you put into it.
If I remember correctly, they had originally started showing it off back in August 2023. It was supposed to have been released sometime in November or early December but they quickly realized that they had a lot more work to do than they had initially thought. That's why we really didn't hear much from them after September. I think the main problem just came down to Peopoly not having the required experience in FDM to produce something as complex as the Magneto X. The overall building blocks of a good printer are there, it just needs a lot of little tweaks to get everything working as it should. Given how complex the Magneto is, I think Peopoly did an overall decent job, but they really should have done more internal testing rather than dump that job on the pre-order customers. Thanks for watching!
@@makerscorner93 I agree its not ready and with the high price tag that tends to leave a bad taste in peoples mouth. This might have been good 10 years ago when tinkering to get printers working was ok but know the standard is 15 minute setup and producing quality prints quickly. They have a lot of work to do.
I have had some first layer issues, but, I know for a fact my belt tensions are perfect.
At present time - I am upset that I seem to be accounted as a "Beta Tester" when my unit wasn't a beta unit- but a mainstream sold unit. It's good I get similar support, replacement parts and the like - but it's horrible if you .. want to print and there is an issue, after all - spending hours disassembling and then replacing parts or reassembling screws, is timely and pretty frustrating. (at current time, I am awaiting the new loadcell version as well as a Y-motor, as my print issues have just.. been horrific.)
Yeah you have the most cursed one! Definitely worse than mine. Been following most of your struggles on the discord.. Peopoly should really just send you a new one at this point!
Seems like a lot of startup issues that can get cleaned up as orders increase. I think this printer belongs into the large format space somewhat justifying the price. I am curious who the manufacturer of the linear motors. I thought Peopoly mentioned the potential sale of these motors in the future. That would suggest that they are the manufacturer (which seems very unlikely). any ideas?
Some people had asked if they would consider selling just the motors. The response they all got was the very corporate "we will take your suggestion into advisement". Translation, probably not gonna happen.
@@makerscorner93 Do you see any markings or other insight into another manufacturer?
Great review, I am actually looking at this printer as an option still to replace my X1C (I want a larger frame and not have to send my files over the other side of the world). However, I need reliability as even after a year 3D printing by myself, my tech skills only go as far as changing the nozzle/printhead.
The foundation of a good printer is there. It just needs a bit more polish. Thankfully the problems are slowly but surely being solved. I'm hopeful that between Peopoly and the community working together we will have Magneto working beautifully soon!
This dude needs to drop his talking points and actually give accurate info. Cloud has always been an OPTION but never required to print.
@@AwwwSnapperz I should have worded that better. It is true you aren't forced into using the cloud, but the majority of the people using those printers aren't aware of that. The overwhelming majority of people are very basic users who might not realize there are other ways to start a print. I will be more careful in my wording next time.
the 3 brands u recommended at the end , i have 1 of each lol
I bet they all wok pretty good! haha
@@makerscorner93 yes they do
I am waiting for my pre -order, problems at customs when sending to the European Union:)
nice review
If I remember correctly, the last blog post said they almost had everything sorted. Hopefully you won't be waiting too much longer!
Great review. Printer with lots of potential. 5 great prints. Then problems start. Link to peopoly discord gives an invalid address. Can you -please post a link to a reliable discord?
Thanks!
This link worked for me peopoly.net/blogs/news/join-peopoly-discord-community
6:21 "unlike other popular 3d printers out there, that basically force you to upload all your files to their cloud just to start a print"
It's been 2 years since Bambu lab first launched in 2022. You have NEVER been forced to use the cloud to start a print.
Sd card, lan only , even sending files over local FTP is an option.
Yes there are other options however SD card is a pain in the butt and means no remote starting of a print, LAN only mode as I had mentioned in the video is not as secure as most people think as Bambu Lab has been caught in the past still scrapping data from people using that option, and while FTP is an option, it is not one that many people are even aware of. I used to use FTP but found it to be slow and generally unstable. Don't get me wrong, I love my P1S but I will never blindly overlook obvious flaws just because I like a particular machine or company.
@@makerscorner93 I have to disagree. When the printer is in LAN only mode it does NOT leak/send out data. I have run checks both at the router level as well as wireshark. You can check it yourself. Heck if you are extra paranoid you can disable net access from any modern router at the client level.
I dont blindly believe any company or any person who hasn't shown proof of their assertions, so I ran my own tests.
Whether you are on a Vlan, normal router or one that is completely disconnected you can run Lan only mode. I frequently do it at local trade shows with a pocket router with no net access.
There was a ytuber saying much of the things you mention and he was incorrect but he did it on a site that knew he was nowhere near an authority on the subject. and he could not answer let alone prove anything as network traffic can be at the very least monitored even if you cant view its contents.
Even the crew behind x1+ who had access to far more of the inner workings confirmed what I already knew. You can run the printers without Net access, it does not send out data unless the user initiates it, and you dont need the cloud for it to work.
You are speaking into the void. that cloud thing has circled the globe and back several times and even after evidence showing it is 💩 people double down on false info.
Oh you're the one working on the cooling thing, I'm really looking forward to that because that 48v power supply fan noise.
A solid covering of the highs and lows so far. I've been good after replacing my load cell and toolhead board, but haven't printed a lot that isn't calibration prints since that. Hoping to do a bed mesh at my normal PLA bed temp and printing some other actual things this weekend. Once I've got that baseline I'll definitely be looking at some of the .cfg updates that folks have put together. Also will see how changing probe accuracy to .025 goes.
It really seems a bit hit or miss with the QA on units that have gone out. As you said there's been plenty of people with issues, but some folks have been having a good time with theirs. Other than the possibly self-inflicted loadcell sensor probe issue I've been okay, fingers crossed that holds.
I have my corner screws tight until the springs weren't springy any more, I'll keep your tension tip in mind if binding issues show up as I print taller things.
Yep I'm that guy! Haha. I am hoping to print and test my "V2" design tonight. If all goes well, I will post links to where you can download the files.
The .cfg video will most likely be coming out next Friday. Want to make a few more tweaks to mine before recording that video.
QA on the Magneto X has been super hit or miss. I agree there are a few lucky ones that got printers with zero problems, but the majority of us were not as lucky. Heck I'm thankful that my problems are on the easy side of things! There are some people who have had to completely disassemble their printers multiple times already!
I also have my screws clamped down, as that's what the instructions (still) say.
Would love to see Peopoly selling the Magnetic actuators directly without having to buy the whole printer 🙂
Unfortunately I doubt that will ever happen. They are a printer manufacturer, not a hardware manufacturer
I was worried about this. I wish they had just released the linear motors in some common sizes and let the community have their way with them. Releasing a whole printer just risks tarnishing the whole system or killing the company because of simple mistakes. I dunno maybe that wouldn't have worked but this is less than ideal.
They were a little too ambitious considering this is there first attempt at making an FDM printer. I feel confident that they will solve most of the problems over time
With a printer like that you should get some B-Roll to dub over. Not nearly enough sexy magnet footage in this video.
Unfortunately not enough footage of the machine actually working yet lol. I have my machine finally in a mostly functional state now (after a long 2 months of troubleshooting) so I plan on doing a follow up video with a lot more footage of the actual machine. I mainly wanted to get some information out there since Peopoly is now selling to the general public and I wanted people to be able to make an informed decision whether or not to purchase it.
review?? you literally showed like 10seconds of the printer on screen....sorry, but I don't wanna see your face for 20min on a product review, I wanna see the product.
You are correct, there wasn't much showing the actual machine. I've had this printer for a few months now and unfortunately don't have much footage of the printer actually working. For that matter, there isn't much footage from anyone of the printer working due to all the issues we have been having with it. Peopoly recently opened up sales to the general public and I just wanted to get some actual information out there for people to be able to make an informed decision if they decide to purchase a Magneto X. I have two more videos planned for the Magneto X in the coming weeks which will have much more footage of the actual printer.
$2000 and it isnt a consistently functional product. 🤦 Thank goodness for testers, volunteers, and lets be honest , suckers who dedicate their time, money , energy and labor to fix a multimillion dollar companies products.
This is one of the strengths and flaws of the 3d printer community. These financial juggernauts are offloading R&D, testing, safety, labor, liability and other costs to the users instead of shipping a fully functional product.
Glad to be one of those "suckers" so others don't have to be! lol.. Honestly Peopoly jumped the gun on this one. They really needed more time to smooth out all the rough edges. Hopefully this will be a learning experience for them, as much as it is for us. Thanks for watching!
@@makerscorner93 When this this is finally complete it will be a beast. Thank you for your service. 🪖lol
Just saying, they're not a multi million dollar company. I think there's about 6 employees aside from people doing the assembly, and even then I think that's only 4ish more people. It's a small team that doesn't have a ton of profit, especially as currently they are sending out upgrade/replacement parts free to current magneto owners, which is really great of them, but they're no prusa or bambu in scale
we didn't pay $2k on preorder
@@infowolfe Whether it is 2k or 1.4k does it even matter at this point?
Do you have a fully functional product for what you paid?