Це відео не доступне.
Перепрошуємо.
How to: Connect a SENA headset to your BMW, NAV V, & SmartPhone
Вставка
- Опубліковано 10 кві 2015
- This is an instructional video to show how to connect your SENA headset
to the BMW Bluetooth module, your NAV V GPS, and your phone to both
your SENA headset and your NAV V.
Thank you for this video. I recently upgraded my Sena 20S to a Sena 50S (purchased from RKA) and after installing it I had to re-pair everything to get the audio going again. This video was a useful guide to getting that done, and I have saved a summary of these steps as a Notes file on my phone in case I have to do it again.
Also -- for the first time EVER I have audio into my helmet from all available sources -- GPS, smartphone, and my BMW K1600. Thanks Richard and Kathy!
:-) ;-) ;-)
Thank you for the video, Richard. Walking through your procedure finally helped me understand where I was making a mistake in the pairing procedures that was preventing me from keeping the bike (radio)-to-headset connection.
Bill Murray Hi Bill, SOOOOOO Happy I could help someone. That's what the videos are all about!!!
I started to watch this out of interest. I have a R1200gs LC with the nav 5. I gave up after 2.03mins.
You have kindly produced a video to help those that struggle with bluetooth connection problems. It would in my opinion have been a better instructional video without the music diverting the watchers attention.
Shame, but technically a source of help for some.
Well done.
Hi Stephen, Thanks for the partial compliment ;-) After doing these videos for many years now I have enough feed back on them now and have learned to put music WAY in the background if any at all. ;-)
Thank you! This worked perfectly to connect my Sena 10u on my Schuberth C3 pro to connect to the Navigator VI and GPS on my 2017 K1600GT. I used the remote control unit that came with the 10u as it does not have the jog dial due to it's stealth and sleek design.
You are very welcome RKA
Thanks for the quick reply and I don't think my UClear will do multi point connection so this week I will be taking it bake and ordering a dual Sena 20s and I will keep you posted when I get it up and connected.
+John Conrad Well if that's what you want I really hope you purchase the SENA 20S from us. www.rka-luggage.com/A46%20SENA/SENA_SMH20S_page.html
Thank you for taking the time to make this video. Good stuff!
Thank You, Thank You, Thank You very much ;-)
Oustanding walkthrough. I have used it a couple times and any time my phone or configuration changes. Thank you sir.
TANKS ... Made my day!!
This is a very helpful video and much appreciated. However, on the last step when connecting the Sena 10c to the Garmin, the GPS would not "find" the Sena no matter how many times I went through the process. Finally I tried connecting the Sena to the Garmin first, then to the K1600 as a "second cell phone" next, then connecting my phone (LG G6) to the Garmin last. It worked!
That's really great that you got it to work. BUT there is no CORRECT way, either way SHOULD work. With that said Firmware, profiles change with time and we have found (PROVEN) the OLD SMH10 will not connect using Multipoint pairing to the NEWER BMW's, why, I have no idea. SOOOO Thanks for the comment .... Get out of the car, walk around, get back in. If this continues to not work ... when everything fails ... it may be time to upgrade your headset. With that said, I use my 10C all the time to do these videos and it still connects fine either way to my 2014 RT. Seemingly the same system as yours and all GTL, GT, RT's ... Not an engineer but I did stay at a "Holiday Inn Express" the other night. ;-) 67,382 views 17 thumbs down ... I take that as a win. ;-)
Ride Safe .... Thanks again for the comment.
Great easy to understand video, thank you Sir!!
Followed it to the T and now all my stuff is connected together and up and running-
+iridemotorbikes Thank you very much for the great feedback. NOW V1.6 has just been released giving you TWO A2DP connections (Stereo)!! I will put together another video very soon addressing this great new feature! Richard RKA
+Richard Battles Let me be clear .... SENA has just released V1.6 for the 20S headset
+Richard Battles Hello Richard, did you put together the V1.6 video. Have the Nav V, Sena 20S and Android phone. been trying to understand what A2DP does for the combination. this has been very helpful, first video that actually got them to work. cheers
+Gary S THANKS!!!!! I Video, direct, Produce, Edit, and sing on the side for ALL the videos on our You Tube page ;-)
I just paired the SRL2 to my BMW 1200RT. Do not pair the SRL2 to the iPhone…..you go into Bluetooth mode and pair the BMW module on your bike under audio helmet one to the Sena SRL2, and then the Sena SRL2 to your Garmin Nav system. Then you pair your iPhone to the Garmin Nav. Works perfectly…..music playing from iPhone through nav system and when a call comes in it over rides the music, and call ends it goes back to music. The one thing you might need to do when a call comes in…..is you will need tap the speaker icon on your iPhone, which actually then shows Garmin Nav as an option to answer call…that because your iPhone is connected through the Nav system..the new system in the heart of the overall
Thank you for sharing this .......so easy to do!
THANKS!
Merci pour votre Tuto, c’est le meilleur du net !
Thanks for your tutorial, it’s the best of the net !
Thanks Richard.
I've recently found that I can pair the bmw to phone 1, my smart phone to phone 2 and then the Nav v to GPS profile. I turn on the Sena before the bike and let it pair to phone. Then start the bike and let it pair to the bmw module and nav v. Then I can manually pair the smartphone to the nav v which takes over media audio splitting phone control to my smart phone. This allows me to use the Nav V live traffic, still make calls from my Sena unit with voice control and everything audio multitasks without fully taking over the channel. Took a while to get it to work but it's awesome. I can run XM thorough the BMW but I opt for the XM app as the sound is superior.
Explains nothing I’m afraid
Very well done sir
Tank you sir.
Hi rich. Great vid and i follow your steps. However on the last pairing for the Sena 20s to the nav6 it ask for a passcode number. I have tried 0000, 1234 and even the passcode when i paired the Iphone7 to the Nav6 (didn't need it the two just paired. I can sure use some help please
Thanx, Richard, I probably will give you a call. I will try to work ask that you have said before I call. Thanx again
Hello Richard, I too have found your video extremely helpful setting up sena 20s. My question, I'm not able to hear the RT's FM radio through the Bluetooth link. Did I miss something, or is that the way it is?
Hi First sorry for the delay we are on the road in the big rig traveling. I need more information. Can you hear the AUX, and USB ports, Can you hear Navagation?, ORRRRR Is the link not connecting at all? After I learn more I can help.
Nice demo - thanks. Just wondering: do you know whether the 20S will connect seamlessly with the BMW communications system in a mate's BMW helmet?
Hi Wilhelm, Sorry but I do not understand the question. The ONLY headsets that can be connected to "Helmet 1 & Helmet 2" on the GTL or RT is the OEM BMW headsets using Firmware 2.0 :-(
The 20S will NOT connect seamlessly to this OEM helmet. You may be able to use universal intercom, but then you lose Phone, music, navigation. I feel this answer may turn you off. Please email me so I can give more detail and links to visit .... EVERYTHING is possible with the correct systems and directions !! :-) I just need to know EXACTLY what you are trying to do and with what ;-)
richard@rka-luggage.com
Great instructional video but just need to clarify using dual 20s or 30k will I be able to connect to Bike Audio, Nav V, iPhone and talk to pillion - possibly by music sharing? I have failed to do this with an Interphone Tour so before changing to Sena I would like clarification.
You cannot connect your passenger to "Helmet 2" so you use music sharing. lf you have any issues or questions give me a call. ....... Hope you plan on upgrading to SENA with RKA. RKA is an autherized reseller with the best price. We will price match ANY autherized dealers online price. AND We have the BEST support anywhere ME ;-)
thank you!!!
You're welcome ;-) Now that the Nav VI is out there are more features. I will do a seminar at the BMW National in July on Communications. Hope to see you there. R
Great video and thanks so much for sharing! I can't wait to walk through this process with my RT and Sena 20s.
Do you know if after pairing as you've shown in your video, are there any issues pairing up with other Sena 20's units? i.e. using group intercom, etc.?
David Stephens Hi Dave, we have only tried 3 headsets on Group Intercom and it works GREAT.. I have only had one customer that had a dropping issue with one out of four but have not heard back from him on what the fix was from SENA. Other than that NO issues.
Thanks Richard!
Thank you: I reset all my connections and the Garmin lady is now back on my Nav V, giving me voice directions.
Glad I could help you
Thank you, just the ticket
Thanks for making the setup relatively easy. Now a question: Earbuds have much better sound quality and noise reduction than in-helmet speakers. How would this all work if you want to use bluetooth wireless earbuds like the Jabra Elite Active 75t True Wireless Bluetooth Earbuds instead of speakers wired to the Sena? is it possible?
That would be like trying to ride two motorcycles at the same time. Not possible the systems would clash BIG TIME. On the other hand I have had to use earbuds (plug in) as I am so hard of hearing ..... BUT ..... Now we are using and offering the SENA 50 series and I no longer need the earbuds and actually have to turn the volume down sometimes. Think about giving us a call and upgrading to the 50's ;-)
Mr Battles,
this is exactly what I want to do with a Sena SMH10. Are the steps the same Sir?
+Rob Fern Hi Ron, very same drill. ;-)
Hello Richard, I have referred to this video many times over the years. One question, I noticed your BMW5 video that the version on the SENA 20s as 1.3, as of May 2018 we’re up to version 1.7.7. Has anything changed as to setting up the Sena 20s now compared to then when using the BMW nav. 5?
Not a thing, the drill is the same now as it was then. ;-)
so this will allow me to turn off the loudspeaker and hear music in my helmet? also will it let me hear music on my phone on the loudspeaker and/or the helmet?
i will probably have tried this before you respond so i may be back to answer my own questions. thanks again
He obviously hasn’t a clue
Hi Richard, thanks for your reply. Can you pair your passenger helmet as well with the GTL, mine always comes up not possible....Thanks
NO .... Only helmet ONE. To connect to your passenger use the intercom, to connect your passenger to the audio use the music sharing feature on your SENA headset
Hi Richard, thanks for the very clear and helpful video. Helped me set up my K1600 easily. Just interested to know what the music is you're playing in the background (from 1'19" in particular!). Very funky. Thanks again from the UK
Hi Mark, Glad the video was useful 142,000 views can't be wrong ;-) The music is from a company called "Smartsound" which I can purchase with no copyright issues.
Richard Battles Thsnks for the quick reply! I’ll look them up!
Richard, thanks for the great video. I switched from an Interphone F4 to the Sena 20S Evo for use with my 2014 BMW R1200RT. Your wonderful tutorial connects the Sena to the bike, the phone (in my case and Android) to the Nav V, and the Nav V to the second A2DP profile. That all works well, but....
I only use my GPS when following a route, or on a long trip. Without the GPS there is no connection for the phone in the configuration we've set up. Is there a way to have the Sena unit hear the BMW radio, and interface with the phone regardless of whether the GPS is installed or not? Thanks!
When you are not using the GPS (I assume not even on the moto) Connect the phone to the SENA 20S using the same profile as the GPS would use. Jog button 6 seconds then Tap phone button (Second mobile phone pairing). NOW you will receive and make calls directly through your phone. .... I do not understand why you would want to do this, as using the GPS as a phone answer allows you to SEE who is calling, but that's how you do it. When you install the GPS you will have to "remove" the phone pairing from the 20S and reconnect it with the GPS Richard RKA
Thanks for your immediate reply! Yes, I did mean that the cover is over the GPS prep mount on the motorcycle, and the GPS remains in the drawer at home. The main reason that I only bring the GPS when I need the directional support is to prevent theft of the GPS if I forget to remove it at a stop. The advantage of pairing the headset to the phone is that I have hands free (and vision free) control over incoming and outgoing calls with voice commands. You are right that with the phone connected through the GPS I can see who the incoming caller is, but my eyes are off the road, I have to reach the GPS to answer the call, and search for names I want to call.
I had hoped that I could put the bike audio (which includes the GPS) on one A2DP profile, and the phone on the other, but there's too much interference. I tried to put the bike audio on the GPS profile, but got no sound.
The solution is to just forget about the whole BMW deal then. If you are afraid of theft, afraid to reach for the screen, afraid to look for numbers I can totally understand. I talk about and teach this BMW stuff. BUT in reality I do not use it.
I use my iPhone ONLY! I connect my phone to my 30K (You may want to upgrade ... which has hands free voice commands) I use these two commands ..... "Hello SENA" .... "Hey SIRI". Not only that I use Garmin USA app on my phone for Navigation.
Feel free to get off of this format and email me at richard@rka-luggage.com or call mye at 707 836 7659 ....
Watch these two videos ....30K "Hello SENA" and "Hey SIRI" voice Commands .....ua-cam.com/video/qrEVgfatyjM/v-deo.html AND "SENA Bluetooth for Dummies II" .... ua-cam.com/video/ss5GoS1PYhg/v-deo.html.
If you want to use the features on the BMW you need to carry the GPS, and touch the controls.
Richard, You have answered my one question that several BMW R1200RT forums haven't been able too... and that is does the Sena pair the bike, helmet, and NAV.... it does. Thank you for the video. How's the audio with XM, and the AM/FM from the bike?
Adam, I am not sure what your question is. If you followed the video EVERYTHING works from the bike. Maybe email me or call richard@rka-luggage.com, 707 836 7659
Good. Video but what appears to be missing is insttruction on which sena mode to use for each connetion. Sena has two phone modes, a Nav mode and a music mode for pairing which mode is used for each pairing in the. Ideo?
Hi Rick, At 1:55 to 2:05 Phone pairing is written on the screen, 3:10 to :3:52 Multipoint pairing is also on the screen during this time, which is now called 2nd mobile phone pairing. There is also a NEW updated video here .....ua-cam.com/video/qOYbaq9gszU/v-deo.html .... Hope this helps you understand the drill better.
Hi Richard, Great video...Thanks. I dont want to pair my phone. Just the bike audio and the NAV VI. I have a Sena SRL. So if I clear all pairings from SRL, Bike, and Nav. VI first...Then Pair SRL to my RT, SRL to the NAV VI I should be good to go? And no way to pair helmet 2 correct? Read that has to be a BMW com. system to pair 2 helmets. Thanks, Bill
Phone pairing, SENA to RT / 2nd Mobile phone pairing or GPS pairing, SENA to NAV VI ..... Correct you can only connect Helmet ONE to the RT. You can use the SENA music sharing if you want to share the audio with a passenger.
@@Richardrka1 Thank you sir! When I first picked up the bike, I paired the Nav VI to GPS pairing on Sena and then the bike to phone 1 on Sena. I didnt clear all pairings first. Had my wife's helmet paired and my Zumo 350. Nav worked great. Bike audio worked great in the garage!! (audio sharing too). When out on the road it was cutting in and out. Strong satellite signal and even tried a strong FM station.....Same results. Hoping after clearing everything first, then pairing in this order everything will work. I'll pair the 2 SRL's last.
Richard. I just dumped all my bluetooth configs and gave this procedure a go. I noticed a couple things. 1. You lose Siri capability by pressing the phone button on the 20s. 2. The connection between the 20s and the Nav V seemed pretty flaky. Sometimes it would all connect up fine and sometimes not. 3. You lose ability to play music from your phone to your 20s, even if the BMW bike audio is turned off. Do you see these things as well? Is this still the setup you are using? Thanks
What motorcycle are you connecting to?
2016 K1600GTL Exclusive. 20s on Firmware 1.6.3
We need to talk .... there is NO issues on this .... my connections are and have been the same. The New Dual A2DP as presented some problems with some peoples desire and set up. I am leaving in a few hours for Quincy, CA, and BMW rally. CALL me and lets get on the same page as your videos are also very enlightening ....email me at richard@rka-luggage.com and I will give you my cell. ;-)
thanks for this video!!! I have a srl 2 inn my shoei neo tec 2....... so will this set up override and make my bovee tune2air unecessary now? Im assuming that Ill be able to control my calls and music on my phone the way youve described this pairing with my srl2.
You may want to watch this video espically from 2:15 on. ua-cam.com/video/LQoAPIt2b3E/v-deo.html If I understand you correctly the answer to your question is "NO" If you have a Nav VI THEN you can stream music FROM your phone THROUGH your NAV VI into the BMW Audio system. TANKS for watch our videos ;-)
@@Richardrka1 nav iv on my 2018 bagger
@@fredzuccarelli ua-cam.com/video/ULkuwxJTGtY/v-deo.html ..... keep the tune 2air or upgrade to a nav vI ;-)
HI Richard,
I have tried numerous times to follow your video and connect my Sena 20s Evo + BMW BT module + Nav VI. For some reason, my iPhone doesn't want to connect to my Nav VI properly.
Strange part is that the Nav VI sees the iPhone and the Garmin Link app is able to connect. But I cannot carry phone call... The icon is grey out.
Hope you can shed some light on this. This got to be most convoluted Bluetooth setup I have come across and I pride myself as pretty tech savvy...
Thanks for doing this useful video.
K
Hi Kevin. You are missing a step somewhere. The setup is not "convoluted" it is actually pretty simple when you think about it. Three steps ....
1: Headset to BMW module ..... Phone button ... Mobile phone pairing
2: Headset to GPS .................... Jog button tab phone button ... Second Mobile phone pairing
3: phone to GPS. ..... Follow Nav instructions.
First I must admit I do not understand why your phone Icon is greyed out BUT ... I am not there with you to see what is going on.
My mantra is "Get outta the car, walk around, and get back in".... CLEAR everything and start over. Connect ONE thing at a time and TEST. If it works go forward. Try to narrow it down and find the culprit
This may be the biggest help to you ..... DO NOT CONNECT YOUR PHONE TO YOUR HEADSET! If you have you have created conflict and your phone does not know who to be friends with.
Hope this helps.
R, RKA
Thanks Richard. Let me wipe everything and try again this afternoon! Once again, thank you!!
@@Bigheaddonut Hi Kevin, did you get it figured out? I have the same problem with the phone icon greyed out.
@@SecretSqurrl try not to install the sena app on the phone yet until your phone is connected to the NAV unit.
I found the comm app can confuse the whole connectivity sequence.
hello Richard,
What is the point of connection the sena or iphone to the bmw module?
i get it for the NAV but module...
thanks a lot
olivier
Sorry Oliver I do not understand the question
sorry typo
what is the point of connecting to the bmw module your phone or headset instead of the Navigator V?
Thanks
Sorry Oliver I STILL do not seem to see what you are asking here. Maybe watch the video again.
The point is to have all audio come through the helmet, but controlled by the BMW system. Personally, I don't like the audio coming through my headset. I wear earplugs to cut down noise, but listen to XM music through the BMW speakers. I connect my bluetooth headset and phone directly to the Navi. While riding, I hear music through the speakers, but telephone calls and GPS instructions through my helmet - and both are controlled through the GPS screen. Makes life simple.
will it work for k1600gtl 2012
Does anyone know...
My wife and I currently both have BMW System 6 evo helmets with the BMW communications system in each. Both helmets are paired to my R1200RT for intercomm, radio, phone and Nav 5. I'd like to change to a schuberth C4 Carbon pro with their SENA SC1 Advanced comms in. I can see from Richards vid that I can pair the new SC1 with my RT, but....if my wife stays on the BMW Evo helmet with the BMW comms, will we be able to talk to each other? In other words will we be able to use different systems through the RT? Any help greatly appreciated. Mike
NO .... The BMW systems connect to Helmet 1 and Helmet 2 on the BMW system ... The C4 connects ONLY to helmet ONE ... Then to each other via intercom function ... I do not know WHO manufactures the BMW system for BMW BUT it is never a good idea to use different systems as you will have to use universal intercom which takes away that persons features as it uses the PHONE Bluetooth connection to connect. NOT a fan of either of these systems. Kathy and I use the new SENA 50 series .... check out the latest 50 series videos on our RKA UA-cam Page.
ua-cam.com/users/Richardrka1videos
There are 4 or 5 starting with (who would have known) .... SENA 50 DEMO 1 ;-)
If I have to get the Sena which models will work with my 2014 BMW R1200RT
+John Conrad Like I answered above CALL me. 707 836 7659 BUT ANY SENA model will work it depends on what features you want or do not need.
Hi Richard,
I have followed exactly your instructions, and when i get to pairing the NAV V to the SENA headset i cannot produce what your getting.
I hold the jog button for 6 sec, the light then flashes red which is correct, but when i press the phone button the unit stays flashing red.
I have firmware 2.0.1 on the SENA 20S EVO, does this make a difference to the way i should be pairing?
By the way your video is easy to read & understand
Hi David, Hold the "Jog Button" down until you hear "Intercom Pairing" then within 2 seconds press and release the "Phone Button" Voice prompt will say "Second Mobile Phone Pairing" ..... Do not worry about 5 or 6 seconds, listen for voice prompts.
@@Richardrka1 Thanks Richard for the quick reply, i will attempt this the 3rd time tomorrow and let you know exactly the result. Just a question with this step i was stuck on, am i putting the 20S into GPS pairing mode, because if so the manual clearly states to press the "phone button" twice, once to get it into "second mobile phone pairing" mode, and second push into "GPS pairing" mode.
@@dwcdesigndrafting Tap the phone button twice if you want that mode. You will hear the Voice prompt say "GPS pairing". Here is the POINT. if you hear the voice prompt SAY "Phone pairing", "2nd mobile phone pairing", "GPS pairing" you are GOOD. If you do not, you have not done the drill correctly ;-) If you HEAR the prompt and still no connection the issue is on the other end (NAV V) make sure you have followed those prompts correctly. 99.99% of issues are USER ERROR ;-)
Richard, enjoy your Sena videos. I have paired my NAV V and phn with my 30K per your instructions, but I have been unable to pair the K30 to my NAV V and another rider. I get one or the other. Also yesterday my friend and had a long wait before his 20S and my 30K would pair. After break on our ride home we could not get them to pair at all. Could you direct me to one of your videos, or offer some instructions? Thanx. Bob
My email is richard@rka-luggage.com. I see a lot of questions to ask or address in your comment that may have been presented in a different way than I can understand.
1: "30K, NAV V and another rider" have nothing in common It's like saying you turn on your TV and your stove turns off. ;-)
2: When connecting headsets after "voice command" says "Intercom Pairing" you need to "Tap" one of the headsets "jog Buttons" to actually start the connections looking at each other.
3: "we could not get them to pair at all". Sounds like you think you have to re-pair them every time you stop. Even better call me at the shop 707 836 7659.
4: You also need to understand the 30K when in Bluetooth mode is setting on top of a 10S NOT a 20S you have no audio multitasking in Bluetooth mode.
5: The 30K DOES have audio multitasking in MESH MODE, To get full benefit of the 30K you need the other rider(s) to have one. The 30K starts shining when there are 3 and more riders
To all those reading this ... I WILL COME BACK ... and comment on what happens. ;-)
Richard RKA
Richard, thanx for the quick reply. I think I understand our difficulty in pairing my 30k with his 20s. We were pushing both jog wheels. I understand you to also say that I can't pair with a 20s and also have my XM radio thru my Nav V. Will I be able to pair with another 30s and have my NAV V as well? Thanx again for all your info. Bob
You are turning on the TV and turning off the stove again Bob ;-)
"INTERCOM" as NOTHING to do with connecting DEVICES.
You CAN have an intercom connection with a 20S
Again ... a little confusing for me to understand what you are saying here ....
You CAN connect to your NAV V ... BUT your XM radio does not go through your Nav V. It comes through the BMW Audio System which you also connect to under one of the other profiles has shown in the video.
"Will I be able to pair with another 30s and have my NAV V as well"
YES!
Turning off the stove again.
THE INTERCOM CONNECTION IS TOTALLY DIFFERENT THING THAN CONNECTING DEVICES. THERE IS NO CONFLICT THERE.
Phone pairing, Second Mobile phone pairing, GPS pairing, Selective phone pairing, Media Selective pairing are ALL ways to connect to different DEVICES. Connecting the intercom to helmet 1 and to helmet 2 are in a different PROFILE .... Please if you do not understand drop me a line and we can talk outside the UA-cam environment.
Hi. I am Raymond from Singapore. I am trying to pair my Sena 10S to my BMW Nav5. Please advise how to do it.
Hi Raymond, This video shows the whole procedure, how else can I help you????
I have an S1000XR with the Nav V. I'm assuming (you know what they say about that) that since the bike does not have the BMW Bluetooth module like the GTL and RT's, that this is not the correct process for me? I seem to have some issues playing music from my Android phone via Amazon Prime Music. There is some interference that prevents me from using the jog dial to forward/rewind and pause music. Only happens when on my BMW and the Nav is on. On other bikes there is no issue leading me to believe I have the Sena 20s and Nav V paired incorrectly? Any advice?
Hi Jason, I may not understand exactly what you want to do but ....... try this video and report back ;-) Smartphone_SENA_Nav ... ua-cam.com/video/rZWJtLt1VmU/v-deo.html It is video 37 on our SENA Instructions Playlist. There are a number of different ways to connect to where you want to go. Not sure I understand the "OTHER BIKES" how many do you have and how is the Nav mounted on them? If the video does not help email me at Richard@rka-luggage.com.
Thanks for the reply, Richard. I sent you an email.
Hi Richard, your videos are always very helpful. I have a little issue with mt SC1 advanced and my Schuberth C4. I have navigation and phone but I can't seem to my music in my helmet like i had?... what do think I did wrong?...
If you ride a BMW with the module ....
1: SC1 to Modular .... PHONE PAIRING
2: SC1 to Nav ........... 2nd Mobile phone OR GPS Pairing
3: Phone to NAV
You did not say WHERE your music WAS coming from
You are now connected to the motorcycles auto system NOT your phones.
If you have a NAV VI you can STREAM your phones music through the NAV VI
The C4 SC1 is my very least favorite system
Richard
@@Richardrka1 Music is coming from the bike , not the phone, don't know if it has something to do with the fact it was originally connected to my last K1600B, it seems like it tries but then switches back...
Should my phone wifi be off between procedure 2 and 3?...
@@marcellofalcone4044 With new connects ALWAYS delete, remove, forget EVERYTHING and start with a new blank page, WiFi as nothing to do with your connections
When you connect the headset to the BMW TEST for music RIGHT THEN.
@@Richardrka1 I get the instructions in the headset but not the music....
I have the Uclear 100 plus and it does everything but it will not play my BMW bike music. Are you guys saying that I will have to buy a sena unit
+John Conrad Hi John, NO we are not saying you have to buy another unit. I do not know how the Uclear unit works BUT it SHOULD connect to your BMW Bluetooth module as I assume it has A2DP stereo profile. CALL me.
Hello Mr Battles,
I'm driving an BMW R1200RT LC (2014), have an BMW Evo 6 helmet with BMW communication system. The communication is done via the Navigator 5 (and also paired with an iPhone). My passenger doesn't have a BMW helmet and we want to communicate without having to buy an extra Evo 6 (or 7) with BMW communication system. If this possible and what can you recommend to make this possible ?
Many thanks.
ps : nice video's
This is going to be a long answer sorry. First I assume you are on the other side of the pond. Second understand I think the BMW system is the very worst as far as quality and functionality and is using OLD technology. The short answer is to purchase another BMW system OR BEST solution is to trash the BMW headset (I know OUCH!) and purchase the SENA 20S dual set (Expensive change OUCH!) This very video explains how to connect a 20S to everything on your waterpumper. (I also own a 2014 R1200RT) I would have to do my whole seminar here to tell you why this is the best solution so here are some videos to watch from our playlist on "SENA Instructional Videos".
#39 The SENA SMH20S App Connection
#36 SENA .. The Full Monty
#26 The 20S App
#25 20S Group Intercom Setup
#23 Universal Intercom
Maybe the most important one to watch .... You CAN purchase another Bluetooth headset and use universal intercom connection. BUT it will not give your passenger or you all the features you need and want.......
Sorry I cannot give you a better answer for your issue
Take two aspirin and call me in the morning ;-)
Richard
Mr Battles, thank you very much for your answer. I have already looked at several of the video's you have suggested. I think I will visit the shop this week and and have a look at the SMH20 and test the universal intercom function. Afterwards, depending on the results, I may take on your on your suggestion for the aspirin.
Again many thanks for your quick and professional answer. It is being highly appreciated on the other side of the pond
Regards,
Eddy
I wanted to hear music threw my iphone and K1600GTs GPS directions either overlay the music I'm listening to or interrupt it. I paired phone to sena 20 s evo as first mobile (or second, can't remember now) and paired to helmet one on bike as the other mobile phone pairing. Can hear everything. My only issue is when the music is playing on the phone, I can no longer hear the gps give me directions unless I stop the phone music app. I like the phone paired to sena directly because of sound quality. Is there a simple way to get what I'm looking for? I was using 1.6x firmware during this but just updated to 1.77 so a factory reset will have me starting over I imagine. Have not done that yet.
Hi Dave, I am going to have to assume, as you did not spill all the beans ;-). If this does not fix the issue we can contiune from email at "richard@rka-luggage.com" You meantioned ONLY the GPS (NAV V or NAV VI?) and the phone. I suspect you have "CONFLICT". Quickest form of resisitance is .... Reset, Clear, forget EVERYTHING associated with your system, EVERYTHING, headset, devices. Connect your phone to the SENA using "PHONE" profile, connect your GPS using "Second Mobile phone" profile. (you can do this either way). Your done. Test your nav by starting music on the phone, and the going to the green nav screen scroll down from "page, Zoom +, Zoom -, to "SPEAK". Push the multifunction wheel IN and the voice prompt will say "Ready to Navagate" cutting out the music. After navagation voice goes away music will resume. NOW you are making and recieving calls through THE PHONE, not the NAV, .... If you connect ANYTHING else like your GT's BT system on the GT to one of those two profiles you will get CONFLICT. Lastly .... If you have a NAV VI you DO NOT HAVE any issues as you can stream your phones music through the VI. I do not like to drag out these answers on UA-cam but feel free to email me. If you follow these instructions it will do what you want. Ride Safe. Richard RKA
Hi Richard. I just wanted to say thanks for helping all of us. I have a few more questions that I will send via email. Thanks again.
I did it and worked, 2 things to note, Sena now is in firmware 1.7 and some options have changed. One the pairing is not Multipoint and the GPS will say 'second mobile phone pairing'. I couldn't find a way to send music from my telephone to the headset other than connecting the phone to Aux on the bike I have an iphone. Own the bike for almost a year is a 16'RT. Other funny thing is that I have to turn on first the headset and then the bike, otherwise I can only hear the voice but they can not hear me. Anyway without this tutorial I wouldn't have connected.
Hi Guillermo, TANKS for the comments of course Firmware updates are happening everyday and videos are pretty much impossible to edit once done ;-) I am working right now on a new video that will cover a lot. One of the longest ones I have done. Connecting the phone to AUX is the best way to do this!!!! Why try to make more Bluetooth connects pull against each other ;-) (This could be your issue I mention at the end) Lastly I cannot understand why you are having connection issues. It should not matter what you turn on first unless you have conflicting connections as that WILL make the headset make a decision as to what to connect to and it will connect to the first thing turned on. SO you have something double connected, and you do not need one of them. Hope this does not confuse you. STAY TUNED for the new video ... Called "Let me count the ways" should be finished this weekend. Ride safe. Richard RKA
Multiple pairing could be the issue, I will check once more the connections. I've started from scratch making a factory reset. Thanks again, looking foward to the video!
AND reset all the devices.
I have the schuberth C 4 and navigator 6 but there is imposible the conection ,whath can i do?
Thank you very much
Hi David, The C4 is the same procederue as ANY SENA headset. The NAV VI is the same proceddures as older ones so ...... The drill is the same ..... ONE BMW BT = "Phone Pairing", TWO Nav VI "Second mobile phone pairing" THREE Phone to NAV VI, Follow Nav VI screens. DONE .... This C4 over view may help. ua-cam.com/video/k5si_KfAPq0/v-deo.html
This information is covered on pages 11 and 12 of your C4 owners manual. Good luck.
How about pairing the second headset? Thanks Mark
Hi Mark. That's another video which is on our UA-cam page BUT .... If you are talking about intercom .... Turn on the headsets. Hold the "JOG" button for 5 or 6 seconds on both headsets, voice command will say "Intercom pairing". then tap and release the "jog" button on ONE of the units.
Richard - great video and I think this is the best way of doing it. Two quick questions:
1. When you pair like this, do you give up smart phone control of your 20S?
2. Can you pair a second helmet to the RT using the Helmet 2 setting? I have heard this is not very reliable on the BMW.
Thanks,
Brian
+Brian Lewis
Question 2. NO. Only the BMW system can connect to helmet 2. With SENA you use "Music Sharing" to connect audio to helmet 2. Also SENA "Audio multitasking" allows ... NO BUTTON PUSHING ... speak music goes into the back ground stop and it comes back
Question 1. YES, BUT NO. This video is dated watch this one .... SENA 20S ver 1.6 Firmware update .... Now you can. ;-) It allows TWO A2DP devices, and the phone to the GPS for phone calls. If you are confused watch it again ;-) or get back to me.
+Richard Battles ok - I have 1.6 and if I am understanding this, I can connect the phone to the Nav V (done), connect to the RT (done) music share with my wife (done). All is good there. So, when the bike is off, I can connect my iPhone to the 20S and use the app but will I have to turn the bike on before I power up the 20S so the phone will connect to the Nav V and not the headset?
+Brian Lewis
Hi Brain you have ME confused. You are doing it so give it a try. ;-) I think it sounds like it will work. BUT WHY? Why do you want to have the iPhone connected twice to TWO different A2DP connections????? This can confuse the GPS, Confuse the BMW Module and confuse the 20S if the situation is wrong and then YOU will be confused. I have been involved with Bluetooth for over 7 years now and I do not understand why you want to do this. I have my moto connected like a pin ball machine and it's everything and more. SOOOO Why do you want to do this? Please understand I am not being critical just curious. EVERYTIME I do a seminar and the Q&A comes up someone asks a question I have never heard ;-)
+Richard Battles , I see your point and here is my answer. I like having the phone go through the GPS so I can see the callers, etc. but my concern is: I like to use the SENA app to configure the 20S - how do I do that if it is connected to the GPS and not the 20S? Do I lose that functionality?
+Brian Lewis This is one of those Ahhhhhhhhhhhhh moments ;-) Watch the 1.6v update video again.
THAT'S what it does ;-)
1. Phone to GPS follow GPS Screens
2. 20S to phone "phone button 6 seconds" A2DP stereo to phone(Use app)
3. 20S to GPS "jog button 6 seconds tap phone" A2DP stereo to GPS
Are we having a "Cool hand Luke" moment here ;-)
How does the intercom work? Is it possible to use a SENA headset and a BMW headset together, including intercom?
+A Hi A, SENA, Cardo, and some other headsets can use universal intercom. The headset asking for connection is fine but the one that GETS connected using universal intercom loses everything except intercom, as they are using their A2DP stereo profile to connect with. Bottom line it is always best to use headsets from the same manufacturer. DIRECT FROM THE SENA MANUAL,
18.2 Two-way Universal Intercom
You can initiate the Universal Intercom connection with non-Sena
Bluetooth headsets using the same intercom connection method as
you would between other Sena headsets. Make sure that the antenna
is flipped up and you may single tap the Jog Dial to begin an intercom
conversation with the first intercom friend, double tap with the second
intercom friend, and triple tap with the third intercom friend.
Non-Sena Bluetooth headsets may initiate the Universal Intercom
connection by activating the voice dialing or using the redialing
operation. You may also disconnect the existing connection by ending
a call operation function (refer to the user’s manual of the headsets for
voice dialing, redialing, and ending a call)
If I have confused you feel free to call me at 707 836 7659 after 8:00 AM PSD.
+Richard Battles Thanks for your reply Richard. This is very useful info! Hopefully the BMW system implements Universal Intercom.
+A Hi A, I TOTALLY understand you have spend a TON of money on the BMW system. BUT the SENA is so much better it's crazy! RKA also is considering adding Schuberth and the SRC-System to our line. check out our Newsletter this month for more info here: www.rka-luggage.com/A41%20Newsletter/2016/Mar%202016%20Newsletter/March%202016.html
AND from the MAIN NEWLETTER page you can see years of Bluetooth information from past issues: www.rka-luggage.com/A41%20Newsletter/Main%20Newsletter%20Page.html
Hi Richard, I have 2015 K1690 GT and just purchased the Sena 10C Evo and was wondering how the Pairing Works. Will I get any call notification on the Nav V or the Instrument Cluster and if so, how to I hook up. Thank You.
Hi Ed, ALL SENA units connect in the same way, So watch the video again and follow along. It will answer all your questions. Richard
Richard Battles
Thank You RICHARD. Also wondering about display on both Nav Screen and Instrument Cluster, is it suppose to show anything?
@@edkaz5606 sorry I do not understand your questions. BUT ..... when an incoming call comes in your NavV screen will chnage to and say "You have an incoming call from Richard" Accept or decline.
Richard Battles Thank You RICHARD. That’s what I was wondering. Thank You again for your Help.
Let it be known that I have been referred to as being "techtarded," but your instructional on hooking up the system on the RT seems to make sense! Now I have a Samsung Galaxy S3 smartphone, a Bluetooth "Interphone" (communication device w/ helmet speakers & microphone, A2DP compatible), a memory stick full of music, my 2016 RT with its 'module' and its 'Nav / GPS' system........oh, my. I hooked things up in the order you recommended, then attempted the simple task first: receiving a phone call. Should the smartphone and the "Interphone" be enough, or will the bike's units need to be turned on, as well?
Robert, I've used the Interphone F4 for years. With my 2014 R1200RT I paired my Interphone to the bike, and then paired it to my phone. I heard the bike's radio and gps through the bike, and could use voice commands directly to my phone through the Interphone. I also plugged an iPod into the audio connector in the box on the bike, and could listen to that as well. I did try a memory stick full of music connected to the USB audio jack, and while it worked, the volume was too low to be practical. I hope this helps.
I'd love to see these same instructions for the Nav IV. When I perform the last step: connect Sena 20S to Nav IV using Multi-Point pairing, I get a message on the NAV IV that the passkey is 1234 but, you can't enter a code on the Sena 20S so my connection fails each time.......Help?
+LawFiveUSSF Hi LawFiveUSSF, I cannot "SEE" what you are doing but if you get a Pass code 1234 it is asking your PHONE that question NOT your headset. You SHOULD have a screen on the Nav IV That says "Add Audio" "Add Phone" Audio is for the headset, Phone is for the phone. I am not good at this "You_Tube" reply stuff and I miss messages some times so lets start this conversation over and email me at "richard@rka-luggage.com". I'd be more than happy to try and get you going on the yellow brick road. Once you turn left instead of right you will NEVER get to OZ. ;-)
+Richard Battles You are correct sir. After reviewing my steps I see that I was trying to connect the SENA 20S to the NAV as a phone instead OD "Audio". Error corrected,mall set up. Works beautifully! Your video was instrumental in helping me! Thank you!
I tried today to pair a Sena SRL with a Nav6, an iPhone 7 and a BMW 1250RT. I managed to pair everything together (following your video step by step), but couldn’t hear the bike radio in the helmet. (Didn’t tried yet phone calls and GPS instructions). Honestly, this is really complicated.
Hi Wooster it's not complicated at all. ;-) You DID NOT connect everything if you could not hear the bike radio. Getting into the SRL configuration menu is the only difference from the video. There is more than one way to skin a cat but this is one way to do this ......... Start with FIRST pairing .... "Phone Paring" to BMW Module. STOP test it. Play radio, You will hear the BMW audio. GOOD. Now "Second mobile phone pairing" to Nav VI. STOP test it. From the navagation screen (green) highlight "Speak" and press in the wheel in .... you will hear the voice prompt say "Ready to Navagate" GOOD. You are DONE with the SRL. Now connect your iPhone to your Nav VI. Nav VI should show Phone Connected, SRL Connected, you are now ready to roll. THE BIG MISTAKE ...... DO NOT connect your SRL to your phone ...... CONFLICT! Feel free to drop me a line at richard@rka-luggage.com. 95,309 viewers cannot be wrong ;-)
Richard Battles I made it ! I don’t know exactly where I got wrong the first time, but anyway, now it works ! Thank you Richard. Now I think I will install a RC3 because I don’t find the helmet buttons easy to manipulate.
@@wooster1173 RC4 is a better choice www.rka-luggage.com/A46%20SENA/2015%20SENA/RC/SENA_RC4%20Remote_page.html
www.rka-luggage.com/A08%20BMW/R1200RT/2014%20RT%20Richards%20Page/INC%20155%20Full%20Monty/155_left_Rad_CB_RC_iPX_bi.jpg
Richard Battles sorry for using this channel, but I have a suggestion : there is no room for keeping stuff like a U-lock, a safety yellow jacket, few tools, the GPS protection panel... the kind of things that are quite small, for which you want easy access, and that you don’t want to put in the side or top cases (as one might uses these spaces for other stuff : luggages for instance). My suggestion would be to use the passenger seat as a additional space : keep the seat as it is but take out the foam inside and make it so that it can be opened to the inside space. To put it simple : it looks like the original seat, but it is empty inside and is used like a box.
Maybe this is the kind of accessory RKA could propose.
@@wooster1173 Sorry but this is not something I can see and we would never do that if we could. We are not seat makers or modifiers ;-) Maybe check with mike Corbin an his Smuggler Trunk ...... www.corbin.com/bmw/bmwk16gtlsmug.shtml. Fine to ask things here but If you want to ask questions or discuss ANYTHING conntact me at richard@rka-luggage.com .... Ride Safe
great video. But does anybody have issues with sound quality when listening to music from the BMW stereo via bluetooth to the SENA SMH10? It's terrible and much better when I listen to music from my iPhone via bluetooth on the Sena.
+John Bell Hi John ..... AHHHHHHHHHHHHHHHH now you got me started ;-). ANY SOUND SOUNDS LIKE S%#t through the BMW Module ... (I own a new RT) This is a BIG part of my seminars .... The BMW Module is using 2.0 Firmware, 3.0 Mbits per second. can you say Dinosaur? 4.0 24 Mbits per second. WHY they do not upgrade the firmware is beyond me. I cannot type so I will be short has possible ...... DO THIS EXPERIMENT .... Plug your smartphone into the AUX plug in your glove box. Play some music, Switch between AUX and XM and the take two aspirin and call me in the morning cuz you'll faint! I am not saying the SMH10 or even the 20S has fabulous speakers BUT ...... In addition purchase our Splugs (You need a 3.5mm input, read 20S) and you will be a better person for it ;-)
+Richard Battles thanks Richard. Will try as soon as I get home.
The connection between SRL headset, nav 6 and bike is ok, but when an alert pops up on the GPS (ie “hazardous zone”), the connection with the radio gets cut ... and lost. It doesn’t switch back to the radio, and I don’t know how to get rid of these alerts. I took out traffic info in the GPS parameters, but this doesn’t help. Is there a solution to that ?
I am not a GPS support person :-( I looked on mine and I cannot find anything on alerts also sorry I cannot help, Calll Garmin and report back
Try turning off the "Smart Link"
Am I be able to hear NAV V turn by turn directions with this setup? I tried on my SMH5-FM but I can't hear the turn by turn directions but I can heard FM and XM from BMW audio system. Thanks
+James Wang The SMH5 will also work if you connect it the way we show in the video. A2DP (stereo) - Phone button 5 seconds to BMW Module, HFP (mono) - Jog button for 5 seconds and tap phone button for the GPS Nav V or IV. Watch the video again. The SMH5 does not have all the features the next step up have but they do have this ability ;-)
+Richard Battles Hi Richard, I tried my SMH5-FM but last step to pair Sean to NAV V always failed. But with 20S I was able to paired to NAV V via HFP (phone button 5 seconds then phone button) I have firmware V1.6.
In you video the last step (Jog then phone button) to "multipoint" pairing but in firmware 1.6 I did not hear this option instead "Second mobile phone pairing" then "GPS pairing". I tried both option but failed. Can you confirm this? It seems Sena took away "multipoint pairing" Thanks
+James Wang YES they have changed the wording to "Second Mobile Phone Pairing" same thing. Except on the 20S ver 1.6 this is now A2DP ... Stereo .... A good thing ;-) I do not have a SMH5 to test we do not really stock them any more, Nice unit but 57 Chevy fins ;-) need to update.
+Richard Battles This SHOULD be the drill for the .....SMH5 from the manual Manual
BMW Module page 12 6.1 Mobile Phone Pairing
NAV V page 12 ............ 6.1.2 Multipoint Mobile Phones Pairing
SR10 page page 15 ...... 7.2 HFP for Phone Call Only
Best I can do for you with out having the SMH5 to test. Not my forte but SHOULD be the same ;-)
+Richard Battles still not working not sure why? However I can paired to my Zumo 660! Thank you for taking time to help me. I'll use 20S from now.
Richard do you have video on Sena SC1 /schuberth integration with bmw rt?
Schuberth has not sent me a helmet so I cannot do a video
Richard Battles ok, I will try following the existing video process and try to adapt the two button format on the sc1
It's pretty straight forward, I have the manual and it is easy to follow.
Hi Bull, It appears I will have a C4 here in a day or two. I will get a video up ASAP.
Richard Battles Good news.
This procedure worked perfectly with my wife's iPhone. With my android, I do not get audio from phone calls. I get notification of incoming and outgoing calls but no audio. Anyone has this setup working with Android devices? BTW I tried with 2 different Androids (Galaxy6 and DroidTurbo2) with the same results. Thanks
Hi Mike, Take a look at my new video "Let me count the ways" it may help out as I think you have cross connections. ua-cam.com/video/pJ_kNH2eva4/v-deo.html
Let me know if this helps. Richard RKA
exactly what I was looking for and the manual does not tell you (as easy as needed) ;)
Hi OL, THANKS ... this video has helped a lot of of riders. Make sure when you are ready to update your SENA products or need luggage you remember where you got help ;-)
Ride Safe.
I don’t get it. I have the nav 6, the Sena and the RT paired, and it works just fine. BUT, I can’t get the iPhone and the Nav 6 to work together : their connection is not stable. They connect for 1 second, and then the connection drops. I have done various time the Nav 6 / iPhone pairing process, but can’t get it work. Has anybody met this problem and found a solution ?
You have TWO devices connected to the SAME PROFILE. .... CONFLICT ..... Start over ..... Delete, unpair, remove, disconnect, forget this device, EVERYTHING you are working with ..... Start with a fresh slate. NOW follow the video again .... Once you get done and everything is working ... DO NOT connect your headset to your phone!!! Again CONFLICT .... You want to use your app? Turn the moto OFF (NAV/BMW BT MODULE). connect to your phone to your headset, use the app, THEN "forget this device". when you turn on the moto again there will be NO CONFLICT. Richard RKA
Richard Battles thanks. Yes. It works now ! I was not using the right connections from the configuration menu of the Sena SRL. I though that GPS needed to be connected as GPS and the bike as media. The GPS shall be paired as « Phone Selective » i.e. HFP and the bike as « Media Selective » i.e. A2DP
@@wooster1173 NOPE, MAY work but not correct. Here is the drill in short hand
1: Phone pairing to BMW Module
2: 2nd mobile phone pairing OR, GPS papring to Nav VI
3: Smartphone to Nav VI
If you want to use the APP on the phone FINE connect your headset to the phone and do your thing on the app. THEN FORGET this device, Unpair your phone from the headset.
You will then be back to the proper setup
At this point, "Media selective pairing" and "Phone Selective pairing" are NOT USED.
PHONE SELECTIVE PAIRING is HFP you cannot use the media player directly on your Nav VI.
If you are connecting more devices let me know.
After answering Fred I thought I would add a little something here. This video was done some 8 years ago so Check out our main "RKA page www.rka-luggage.com/index.html and go to our You_Tube Page" LOTS of new stuff. This drill as been the same and will continue to be the same. 1: Phone to GPS, 2: Headset to GPS via "GPS Pairing" , 3: Headset to Audio system via "Phone Paring" .... DONE. There ARE other ways to do this BUT "KISS" Also there is NO ORDER you have to turn on your stuff to. Ride Safe Richard RKA. We offer Luggage, Schuberth, SENA and more
Mr Battles I just purchased a 2017 BMW GS 1200 with Nav 6 and the 20s automatically connects via Bluetooth to the nav6. However, my SENA will not automatically connect via Bluetooth to my iPhone 7. Help!!!!!!!!!!!! I am begging at this point for somebody smarter than me to figure this out
Hi Arthur, We have had no issues connecting the 7. BUT you do NOT connect the 7 directly to the 20S.
20S to Nav VI
iPhone 7 to Nav VI
DONE STOP NO MORE
NOW if you continue on and connect the 20S to your 7 you will have CONFLICT between the phone and the Nav VI!
Richard Battles ahhhhhbut then how do you answer calls and place them?
Through the Nav VI!!!!!!
Richard Battles 🤗🤗🤗🤗🤗🤗🤗
Now I'm getting it using the wheel control. So I have to loAd my contacts onto the nav 6
I guess using this way , you cannot have the passenger headset connected ?
Hi Alain, As been the case since 2011, The ONLY headsets that can connect to the "BMW headset TWO" are the OEM BMW headsets.
So using the SENA, For rider to passenger use the headests intercom function, To share music use the "Music share" function. Your passenger can also use their own phone and can make their own phone calls and listen to their own music so you can listen to ZZ Top and she can listen to Yo Yo Ma ;-)
So Richard , if i understand you correctly , only my headset would be connected to the bike , the intercom and all the music , etc ; need to be set using the Sena within itself and using their proprietary functions ? Doing this , can the passenger listen to the bike radio same as me ?
Another question as i am new to Sena , operating in this scenario , what about bike to bike intercommunication ?
If you have a SENA 10 series you can connect to a total of three other SENA units. If you have the 20S series you can connect to eight total headsets. READ THE MANUAL ;-) "10S page 20, 5.4 intercom Pairing", "20S EVO page 35 14.1 Pairing with other 20S EVO headsets" The connection procedure is and as been the same with ANY SENA headset the following video was done 4 or 5 years ago with an older system BUT it is the same directions ua-cam.com/video/UN47If-ZrKE/v-deo.html
Let me know if this helps and REMEBER who is helping you ;-) RKA ... We offer these products to you and we use these products a riders. Richard. PS you should know where the RKA You Tube page is ...... ua-cam.com/users/Richardrka1videos
Thanks , i will remember RKA for sure . I will look more deeply into this .
Why not just use your cellphone? Most modern smartphones are waterproof and have a GPS function. Just sayin'...
These darn things are upwards of 1000 USD, way too much money in my opinion.
Hi Kenneth, You GOT IT! Do not tell anyone but when we are not at a show or event where I am doing a seminar I do not connect this way. I use my phone! I get all the music and mapping I need and run "MyRadar" for weather, make and receive calls with ONE connection. Further more I use the RC4 remote rather than worry about the "Wonder wheel Now don't tell ;-) Maybe you should check out more of the RKA UA-cam videos and you will see many different approach's that I cover.