as someone who got my first drill last year and really has no clue what i'm doing, thank you for these tips! they might be common sense to people who grew up using tools but for those who didn't and have had no mentorship, this was really helpful.
My opinion. When you relax, take your time and maintain full control of your power tools. Your power tools will last twice as long. Read the manual or another brands manual that is more detailed. Use sharp drill bits when drilling holes. Dull drill bits waste time, will possibly overheat the motor, battery, gears and ball bearings in the drill. I'm a hybrid or transitional tool user. I enjoy both corded and cordless tools. I still enjoy using my very reliable corded electric drills. I actually like the, motor sound and the small internal carbon brush sparks. The fan blowing out of the vents feels good to. Grab and go. Cordless drills are awesome too as long as the batteries are charged. The clutch and ability to driving screws is amazing. I occasionally grab a screwdriver and enjoy the feeling that I drove in that screw by hand. Drill a pilot hole and use a tiny amount beeswax on wood screws threads. I personally don't like the cordless drill"s "electric brake " sound or noise. Internal parts rotating high speed are being stopped almost instantly. My opinion. If it sounds really bad and destructive it may not be very good for the cordless drill.
You did not explain why you chose a Phillips #2, when you ended up using a PZ 3 bit in the first large screw. Why didn’t you start with a PH 3? It wouldn’t have spun out.
2:25 nothing wrong will be done to the mechanism while we are stopping rotation ruptly - just normal electric breaking system stops the drill. The real damage to the gearbox is caused by clutching the gearbox from slow to fast speed while the drill keeps rotation or incomplete gear switching. That's the source of the most drill mechanism problem.
It is believed that carbon brushes wear out from a sudden stop. But I think it's easier to change these brushes more often than to waste time on a smooth stop.
@@cristianpablo-es7jq Sí. Este modelo tiene un motor con escobillas eléctricas. Hace poco cambié la parte trasera de plástico del motor que sujeta las escobillas. Este detalle puede diferir y requerir refinamiento, pero si toma barras de carbón, esto no es un problema. Al principio, el motor echaba humo con una carga pequeña, luego comenzó a funcionar normalmente.
2:26 My dad did this a lot and now the driller keeps spinning for a second or two before stopping... do you know which piece I have to replace to make it work again? I already replaced the motor at the back 😅
As well as drilling a pilot hole near the end of a piece of wood I would also recomend countersinking it because without doing so the head of the screw forces the wood fibres apart; it's like driving a wedge into the wood. Whenever I want to join two pieces of wood together I always drill a hole in the top piece wood the same diameter as the screwthread, otherwise the top piece of wood is never really clamped tight to the bottom piece because the screw thead prevents them from doing.
you're great, there are a lot of people who use them without knowing. unconscious use harms the user, the material and the machines. greetings from Turkiye my friend. 🇹🇷
I'm going to add one more note that goes with the video itself I already know that you never ever ever had the wrong screwdriver bit with the screw could be slop it will strip the bit out clutch or no clutch and you are correct about the hammer mode never use it for screws and you most must have masonry bits you'll destroy regular bits. The only way my 27 years using cordless drills I've learned he is in a hex screw bit that usually either has a Phillips or Flathead secondary you can use the drill mode just be careful I wouldn't recommend that for a newbie or a homeowner someone in the trees and know what they're doing and know how to use the variable speed trigger properly yeah
This can be felt and seen when the screw has reached the desired position, especially if there are drilled holes. But it does take skill, especially on large fasteners where the final effort will twist the arm.
The hammer function of a battery tool does not add anything to the torque rotation of the fastener. It is purely percussion from the end. That’s why it doesn’t matter if you use it unless you want to damage your drill.
I once used latex gloves operating a pillar drill. Can't believe I was so stupid. Unsurprisingly the rotating bit caught the glove, which began wrapping round, pulled my hand in towards the spinning bit. Got away with a small gash on the back of my hand. Gloves and drills=No! Get dirty hands instead 👍
PH is called a Phillips screw, PZ is Pozidrive. They're slightly different designs. Unfortunately he has conned the viewers because he used a smaller bit in the PH demo, which would always not fit.
Прав Задорнов. 😎 По названию ожидал увидеть нечто толковое, неочевидное. Досмотреть до конца невозможно.. 🤦 Не использовать режим "перфоратор" для закручивания шурупов. Это добило.
Başlarken bir çok paylaşımcı arkadaşımızın şarjlı matkap tanıtımları sırasında karşılaştıkları küçükte olsa vidalama hataları üzerine bu konuyu gündeme alıp,amatör kullanıcılara anlatılması önemlidir diye yorum yapmıştım.Şuan sizin payylaşımınızı izlemeden sade konu başlığını okuyup,bu yorumu yapıyorum.Çünkü bir Türk atasözü ''Çarşambanın gelişi perşembeden bellidir''Bende bu atasözüne inandığım için öyle olduğunu biliyorum.Sizi insanları bilgilendirdiğiniz anlamlı paylaşım için kutluyorum.Tebrik ediyorum.
Evet. Birçok kişi şarjlı matkabın nasıl kullanıldığı konusunda tecrübe sahibi değil... Sadece evine veya iş yerine alıp, gelişigüzel kullanıyor. Haklısınız...
Il oublier d’indiquer que pour faire fonctionner la perceuse qu’il fallait appuyer sur le bouton et ne pas chercher à la brancher, car c’est une perceuse sans fil comme ne pas essayer d’enfoncer la vis en la posant le plat en bas et la pointe filetée vers le haut, car elle n’entrera pas ! S’il ne considère pas les auditeurs pour des papillons blancs directement ,il leur fait gentiment comprendre !
Eigentlich sollte man zum einen genug verstand im kopf haben und wissen, das man den Richtigen BIT für die entsprechende Schraube nehmen sollte und auch zwei Augen im Kopf haben um zu sehen ob der Bit auch in den Schrauben kopf richtig passt. Und ausserdem ist es logisch und üblich dementsprechend mit einem passenden Bohrer vor zu bohren bevor man die Schraube rein schraubt. zum einen macht man es sich selbst leichter und man braucht nicht den Accuschrauber zu stark beanspruchen , soll heissen den Accu und dann kann auch der Bit nicht rausrutschen aus dem Schrauben Kopf. generell übt man beim Schrauben mit dem Accuschrauber von oben druck aus damit der Bit nicht überdreht und auf dem Schraubenkopf springt und zum einnen den Bit und den Schraubenkopf zerstört. Sorry das man sowas noch sagen muss, aber eigentlich sollte man darauf von selbst kommen. 🙄 Wer auf diese art und weise Werkzeuge und schrauben benutzt, sollte am besten die Finger ganz davon lassen und es jemanden machen lassen der die nötigen fachkenntnisse sowie erfahrungen und KEINE 2 linken Hände hatt.
@@user-qs2ky1oh5d English of Course. Silence may be universal but we no longer have silent movies, do we? Most of the Technological World (UA-cam) is Speaking ENGLISH.
I should show this video to my father in-law you still thinks a cordless drill the clutch doesn't need to be used you just put it on drill and go and what his wife's breaking screws I'll explain to me and times you don't get it I remember entering a contest for some Ryobi toolkit I gave him the drill and sold the impact driver because he don't know how to use that even with circulatory doesn't use the adjustments or the bevel just cuts I told you can get kick back if it's at the wrong level the blade I did this for a living this stuff so I know what I'm talking about but people don't listen I just want to throw my two cents in there maybe it helps someone else out
I understand you. People do not take it seriously, and dont realise your talents and experience. Here is what I wrote for you. I improved your message into proper english - "I will show this video to my father-in-law, who thinks that a the clutch in the cordless drill is not needed. He just puts it on drill mode and go. His wife has been telling me that he breaks the screes all the time, and still doesn't listen. I remember entering a contest and winning a Ryobi toolkit. I gave him the drill machine, and sold the impact driver, because he didn't know how to use it. Same with the circular saw, he never uses the adjustments or bevel angle settings. He just turns it on and cuts. I told him that he can get kickback if he keeps using the wrong level of the blade. I did this stuff for a living, so I know what I am talking about. But people just dont listen to me and keep doing the wrong thigs again and again. Just wanted to throw my two cents here, which might help someone out."
as someone who got my first drill last year and really has no clue what i'm doing, thank you for these tips! they might be common sense to people who grew up using tools but for those who didn't and have had no mentorship, this was really helpful.
That’s amazing clips video!! คลิปดีมากๆๆเลยคะ ทำให้นู๋ฉลาดขึ้นเยอะเลย ขอบคุณที่ทำคลิปดีๆนะคะ นู๋ต้องซ่อมบ้านเอง เลยต้องมาตามหัดเรียนรู้ในนี้ เพราะนู๋ถูกช่างโกงหลายล้าน และจบท้ายด้วยการทิ้งงานคะ 😢
My opinion.
When you relax, take your time and maintain full control of your power tools.
Your power tools will last twice as long.
Read the manual or another brands manual that is more detailed.
Use sharp drill bits when drilling holes.
Dull drill bits waste time, will possibly overheat the motor, battery, gears and ball bearings in the drill.
I'm a hybrid or transitional tool user.
I enjoy both corded and cordless tools.
I still enjoy using my very reliable corded electric drills.
I actually like the, motor sound and the small internal carbon brush sparks. The fan blowing out of the vents feels good to.
Grab and go.
Cordless drills are awesome too as long as the batteries are charged.
The clutch and ability to driving screws is amazing.
I occasionally grab a screwdriver and enjoy the feeling that I drove in that screw by hand.
Drill a pilot hole and use a tiny amount beeswax on wood screws threads.
I personally don't like the cordless drill"s "electric brake " sound or noise.
Internal parts rotating high speed are being stopped almost instantly.
My opinion.
If it sounds really bad and destructive it
may not be very good for the cordless drill.
Excelente video,de temas que nadie trata,gracias.
thanks for the advice
Great video super helpful and informative, you’ve gained a new sub!
Good tips!
Very useful video, many many tganks
Thank you 😍
You did not explain why you chose a Phillips #2, when you ended up using a PZ 3 bit in the first large screw. Why didn’t you start with a PH 3? It wouldn’t have spun out.
True, maybe not that easily, but it would still be the wrong bit for the PZ screw.
Muy bueno !!
Спасибо тебе, добрый человек
Cool, i've just bought mine :)
Terimakasih telah berbagi informasi ini yang sangat membantu.... semoga selalu sehat....
2:25 nothing wrong will be done to the mechanism while we are stopping rotation ruptly - just normal electric breaking system stops the drill.
The real damage to the gearbox is caused by clutching the gearbox from slow to fast speed while the drill keeps rotation or incomplete gear switching. That's the source of the most drill mechanism problem.
It is believed that carbon brushes wear out from a sudden stop. But I think it's easier to change these brushes more often than to waste time on a smooth stop.
Battery powered tools made for the last 15 years are brushless. Your point is not valid.
@@johnrobertson7583 Brush battery tools are still in use.
@@variablegoods7234hola el einhel tccd1835li tiene ese defecto ?
@@cristianpablo-es7jq Sí. Este modelo tiene un motor con escobillas eléctricas. Hace poco cambié la parte trasera de plástico del motor que sujeta las escobillas. Este detalle puede diferir y requerir refinamiento, pero si toma barras de carbón, esto no es un problema. Al principio, el motor echaba humo con una carga pequeña, luego comenzó a funcionar normalmente.
Thank you,my friend!It s very itresting!
Too bad. The. Batt don't last long on charging them
Thanks I just made that mistake a month ago. Now I now what I did wrong. 👍👍🙏🙏
Actually solid info. Thanks
You should do a video on 5 things you should never do with a cordless impact driver.
2:26 My dad did this a lot and now the driller keeps spinning for a second or two before stopping... do you know which piece I have to replace to make it work again? I already replaced the motor at the back 😅
As well as drilling a pilot hole near the end of a piece of wood I would also recomend countersinking it because without doing so the head of the screw forces the wood fibres apart; it's like driving a wedge into the wood.
Whenever I want to join two pieces of wood together I always drill a hole in the top piece wood the same diameter as the screwthread, otherwise the top piece of wood is never really clamped tight to the bottom piece because the screw thead prevents them from doing.
6. Never use drill bits without bit holder
It's more a matter of convenience and specific situation.
you're great, there are a lot of people who use them without knowing. unconscious use harms the user, the material and the machines. greetings from Turkiye my friend. 🇹🇷
Where's turkiye?
@@jesseerickson662where are you from?
magic 😳
Bueno vídeo mucho very good
mucho very good....
I'm going to add one more note that goes with the video itself I already know that you never ever ever had the wrong screwdriver bit with the screw could be slop it will strip the bit out clutch or no clutch and you are correct about the hammer mode never use it for screws and you most must have masonry bits you'll destroy regular bits. The only way my 27 years using cordless drills I've learned he is in a hex screw bit that usually either has a Phillips or Flathead secondary you can use the drill mode just be careful I wouldn't recommend that for a newbie or a homeowner someone in the trees and know what they're doing and know how to use the variable speed trigger properly yeah
This can be felt and seen when the screw has reached the desired position, especially if there are drilled holes. But it does take skill, especially on large fasteners where the final effort will twist the arm.
The hammer function of a battery tool does not add anything to the torque rotation of the fastener. It is purely percussion from the end. That’s why it doesn’t matter if you use it unless you want to damage your drill.
Bir vidayı kaçıncı torkta sıkmamız lazım tam göremedim
I once used latex gloves operating a pillar drill. Can't believe I was so stupid. Unsurprisingly the rotating bit caught the glove, which began wrapping round, pulled my hand in towards the spinning bit. Got away with a small gash on the back of my hand. Gloves and drills=No!
Get dirty hands instead 👍
using a size 2 bit on a size 3 screw will always be a bad idea
So the hammer function isn't for driving in nails.
use bit extender
Есть же текстовые пояснения, пальчиком для чего дёргать
What do you mean by PH and PZ please ?
Thanks
PH is called a Phillips screw, PZ is Pozidrive. They're slightly different designs. Unfortunately he has conned the viewers because he used a smaller bit in the PH demo, which would always not fit.
Puras claves pz uh de q se trata
ne jamais la tremper dans l'eau, après elle fonctionne moins bien !!
❤
Капитан очевидность.
Прав Задорнов. 😎 По названию ожидал увидеть нечто толковое, неочевидное. Досмотреть до конца невозможно.. 🤦 Не использовать режим "перфоратор" для закручивания шурупов. Это добило.
I learned something today. Never use a size 2 bit in a screw that requires a size 3 🤨...🤦
Başlarken bir çok paylaşımcı arkadaşımızın şarjlı matkap tanıtımları sırasında karşılaştıkları küçükte olsa vidalama hataları üzerine bu konuyu gündeme alıp,amatör kullanıcılara anlatılması önemlidir diye yorum yapmıştım.Şuan sizin payylaşımınızı izlemeden sade konu başlığını okuyup,bu yorumu yapıyorum.Çünkü bir Türk atasözü ''Çarşambanın gelişi perşembeden bellidir''Bende bu atasözüne inandığım için öyle olduğunu biliyorum.Sizi insanları bilgilendirdiğiniz anlamlı paylaşım için kutluyorum.Tebrik ediyorum.
Evet. Birçok kişi şarjlı matkabın nasıl kullanıldığı konusunda tecrübe sahibi değil... Sadece evine veya iş yerine alıp, gelişigüzel kullanıyor. Haklısınız...
the screw head will tell you if its a ph or pz ( pz screws have the marks )
Why you use Combi Drill??
De ce nu sunt toate PH s-au PZ , care este diferența??
Il oublier d’indiquer que pour faire fonctionner la perceuse qu’il fallait appuyer sur le bouton et ne pas chercher à la brancher, car c’est une perceuse sans fil comme ne pas essayer d’enfoncer la vis en la posant le plat en bas et la pointe filetée vers le haut, car elle n’entrera pas !
S’il ne considère pas les auditeurs pour des papillons blancs directement ,il leur fait gentiment comprendre !
Ich habe mich öfters gefragt warum gibt's ph und pz???? Kann da nicht nur z.B. PH2,oder PH1 als Standard bleiben??!!
💯💯💯💯💯💯👍🤝
Хорошо что просветили, Я всю жизнь шурупы забивал шуруповёртом а закручивал молотком
ph2 и pz3 ? конечно не совместимы , нужно было брать ph3 🤣
Nein
Stopping the drill at full speed doesn't damage it. It has a brake
I learned something today. now back to bed. . . . . . . . .
Eigentlich sollte man zum einen genug verstand im kopf haben und wissen, das man den Richtigen BIT für die entsprechende Schraube nehmen sollte und auch zwei Augen im Kopf haben um zu sehen ob der Bit auch in den Schrauben kopf richtig passt. Und ausserdem ist es logisch und üblich dementsprechend mit einem passenden Bohrer vor zu bohren bevor man die Schraube rein schraubt. zum einen macht man es sich selbst leichter und man braucht nicht den Accuschrauber zu stark beanspruchen , soll heissen den Accu und dann kann auch der Bit nicht rausrutschen aus dem Schrauben Kopf. generell übt man beim Schrauben mit dem Accuschrauber von oben druck aus damit der Bit nicht überdreht und auf dem Schraubenkopf springt und zum einnen den Bit und den Schraubenkopf zerstört. Sorry das man sowas noch sagen muss, aber eigentlich sollte man darauf von selbst kommen.
🙄 Wer auf diese art und weise Werkzeuge und schrauben benutzt, sollte am besten die Finger ganz davon lassen und es jemanden machen lassen der die nötigen fachkenntnisse sowie erfahrungen und KEINE 2 linken Hände hatt.
😁👍👏👏👏👏👏👏👏👍
There is sound, I give you permission to TALK, and Narrate the video.
Да, только на каком языке - непонятно. А вот молча и знаками - поймет даже абориген времен Кука
@@user-qs2ky1oh5d English of Course. Silence may be universal but we no longer have silent movies, do we? Most of the Technological World (UA-cam) is Speaking ENGLISH.
On the contrary, I highly appreciate the author's idea to explain without sound, everyone will understand even without a translator.
Глухонемой видимо. Все пальцами манипулирует. Элементарные вещи выдает за эксклюзив.
I should show this video to my father in-law you still thinks a cordless drill the clutch doesn't need to be used you just put it on drill and go and what his wife's breaking screws I'll explain to me and times you don't get it I remember entering a contest for some Ryobi toolkit I gave him the drill and sold the impact driver because he don't know how to use that even with circulatory doesn't use the adjustments or the bevel just cuts I told you can get kick back if it's at the wrong level the blade I did this for a living this stuff so I know what I'm talking about but people don't listen I just want to throw my two cents in there maybe it helps someone else out
I understand you. People do not take it seriously, and dont realise your talents and experience. Here is what I wrote for you. I improved your message into proper english -
"I will show this video to my father-in-law, who thinks that a the clutch in the cordless drill is not needed. He just puts it on drill mode and go. His wife has been telling me that he breaks the screes all the time, and still doesn't listen.
I remember entering a contest and winning a Ryobi toolkit. I gave him the drill machine, and sold the impact driver, because he didn't know how to use it. Same with the circular saw, he never uses the adjustments or bevel angle settings. He just turns it on and cuts. I told him that he can get kickback if he keeps using the wrong level of the blade.
I did this stuff for a living, so I know what I am talking about. But people just dont listen to me and keep doing the wrong thigs again and again. Just wanted to throw my two cents here, which might help someone out."
I c bad grama annoys thee
Try using punctuation if you want to help
@@johnle231 yea budi
I dont understand you sorry.
każdy to wie paranoja
Widać nie każdy xD Ale rozwalił mnie ten film :D
👍👍👍👍👍👌👌👌👌👏👏🇦🇫🇦🇫🇦🇫🇦🇫🇦🇫🇦🇫🇦🇫🇦🇫👏
Don't buy phillips screws, Don't install screws with a drill.
На битодержатель денег не хватило? 🤣
tu as trouvé ca tout seul??
He's 10 and is supposed to do a project for school all by himself
Those tips are too short
Gebruik een bithouder
ну и шляпа
Make love, no war!
А кто не воюет - с тем "любовью" и занимаются
쇼 에 불과함
Try talking my son didn't understand your finger gestures
Are you assuming that his first language is English?
Why don’t you talk
А тут и без слов понятно 🤷♂️
On the contrary, I highly appreciate the author's idea to explain without sound, everyone will understand even without a translator.
Для вас это популярно. Учить какой саморез чем закрутить
Yapmamaniz gereken 5 sey diyen arkadas,yuksek devirde el ile mandreni sıkıyor🤣