***Build That Wall Strong*** Project SPL Update

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 114

  • @UnofficialAudio
    @UnofficialAudio  5 років тому +29

    The enclosure is actually starting to look like something. What do yall think so far? Could you hear the difference between the gong and the thud?

    • @ogairbender808
      @ogairbender808 5 років тому +1

      Love it man she's a tank for sure.

    • @FinancePro203
      @FinancePro203 5 років тому

      Loving this. Seems like guys put months and years into welding cages, etc... and I bet this will be just as loud if not louder than most other SPL builds that have 10x the money and labor put into them 👌🏽

    • @04tb2
      @04tb2 5 років тому +1

      Looking great, love the build videos and loved the long video also just because there is so much involved in the build and it's great to see everything coming together.
      Hope to see this sundown monster this season

    • @fxgamer-11yt
      @fxgamer-11yt 5 років тому

      i hope you plan on fibre glassing the wood under the cab

    • @hotshottingwithaChevyhd
      @hotshottingwithaChevyhd 5 років тому

      A lot better video thanks i been wanting to see the work being done great video ill be looking out for more

  • @iamthemaninde
    @iamthemaninde 5 років тому

    Awesome... Looking good !!! 👍👍

  • @rudejude9725
    @rudejude9725 5 років тому +1

    You can definitely hear the difference dude it’s going to be so solid as fuck when it’s done . I honestly can’t believe how much progress you’ve had in such a short period of time keep up the hustle

    • @UnofficialAudio
      @UnofficialAudio  5 років тому

      And here I thought I was going slow only getting an hour or so of work in a few nights a week

    • @rudejude9725
      @rudejude9725 5 років тому

      No way I know how hard it is to get shit done with two kids I’ve been trying to get in my trunk for a week now

  • @Tom-yd1em
    @Tom-yd1em 5 років тому +1

    Awesome work sir. That's going to be badass..

  • @robfalkner4303
    @robfalkner4303 5 років тому +1

    Can't wait to hear it Derrick !!!

  • @TheQuadfather1976
    @TheQuadfather1976 5 років тому +1

    Great video Derrick!

  • @bigcountrybang774
    @bigcountrybang774 5 років тому +1

    Your fucking amazing at your craft brutha. I hope to one day be a fraction as good as you are with your craftsmanship brutha and I'd be stoked. Thanks again for all your knowledge...your channel is deffinantly my #1 go to when watching any SPL build or any other build you may have in store for us.👍👍👍👍👍👍👍

  • @smokeythomas4407
    @smokeythomas4407 5 років тому +1

    Much better..now that's a time lapse..love it

  • @iCRASHgetOUT
    @iCRASHgetOUT 5 років тому +1

    Coming along real quick! Good job! I like that you upload almost everyday and atleast have a build video atleast every other. I watched bassman and Jeep and bass while they build and I’d have to ignore their channel for like a week at a time just to get behind so I could binge watch a few. Love the channel and what your doing! Can’t wait to see it slammin.

  • @markcunningham2959
    @markcunningham2959 5 років тому +1

    Nice job 👍

  • @ericklypchak4677
    @ericklypchak4677 5 років тому +1

    Looking good. I really like the time elapsed video.hope to see more if it.great work

  • @loloent
    @loloent 5 років тому +1

    Much better the actual building of it & time-lapse catches my attention.

  • @MadDragon75
    @MadDragon75 5 років тому +2

    Details are good. It's hard to please everyone. This is going to be epic!

  • @psementalist
    @psementalist 5 років тому +2

    Progress is moving forward cery nicely looks badass

  • @LDRTHNU
    @LDRTHNU 5 років тому +1

    Derek this is starting to look rock solid, I can’t wait to see the loading wall, tubes and it’s going to be loud af

    • @UnofficialAudio
      @UnofficialAudio  5 років тому

      Thanks! Doing a full video just on building the tubes. Hopefully get that done next week.

  • @adventuresofhess1058
    @adventuresofhess1058 5 років тому +2

    Love a full build vlog. Seeing all the small details is the interesting part to me. Keep it up man.

  • @mattalones93
    @mattalones93 5 років тому

    Beats mode! 💪🏼 🔊

  • @jeffwallace8437
    @jeffwallace8437 5 років тому +1

    Loving the progress and wishing the best. keep up the good work Derrick!

  • @gordn24555
    @gordn24555 5 років тому

    wow ppl complain about every little thing never happy. I liked that last video its great for ppl wanting or thinking of doing their first wall build. i cant waaaaaait to upgrade my 12"s to sundowns : / Big fan an subscriber from San Antonio oh i want to see that truck an awesome system when you come to Texas

  • @charliefrancis6438
    @charliefrancis6438 5 років тому

    This project brings me back to my youth , good to see other people who as crazy me , 8 15 inch subs 4 layers of 1 inch mdf, you need more room for batteries, unless your going with super caps , keep up the good work

    • @UniCrafter
      @UniCrafter 5 років тому

      yeah he's going with supercaps, but still 3 per amp, so 12 for 4 7500s

    • @UnofficialAudio
      @UnofficialAudio  5 років тому

      Yeah I'll be using supercaps. Planning ahead for the future when i go up to 6 amps on 6 subs so going with 18 banks of supercaps.

    • @charliefrancis6438
      @charliefrancis6438 5 років тому

      Go crazy and strap 2 amps on each coil , think they will handle 30 k for 1.5 seconds ?, or are you planning on running this setup for minutes at a time? , with super caps I assume your just burping the system, go with the most power you possibly can fit 👍🏻👍🏻👍🏻

  • @Xstreamaudio
    @Xstreamaudio 5 років тому

    Looking good!.I'm about to start wall number 3 in my gmc sierra. Your progress has motivated me to get it going.

  • @benjaminoller8765
    @benjaminoller8765 5 років тому

    I'm amazed at how quickly you are able to get this worked on

  • @chrisstafford6793
    @chrisstafford6793 5 років тому +1

    👍👍👍👍👍👍👍👍 Derrick your the man.

  • @terryfarmer170
    @terryfarmer170 5 років тому +1

    Awsome build that's a lot of work but it will be worth it love to hear it 👂🔊👍

  • @julioc3445
    @julioc3445 5 років тому +1

    Fuck the haters bro... Last video was just fine... Your doing a damn good job! KEEP ON KEEPING ON!!!

  • @bigvell02
    @bigvell02 5 років тому +1

    That other video was long but still cool, lol I actually watched it in 2 parts. Keep up the great work all the way around. Heck I need to start on mine smh. I already know I will be a busy basshead and at the last min.

  • @ogairbender808
    @ogairbender808 5 років тому +1

    Give it hell bro love the build log keep it up man.

  • @winfieldjenkins1328
    @winfieldjenkins1328 5 років тому +2

    You should nickname the blazer Hulksmash. Great progress

  • @dcraig63
    @dcraig63 5 років тому +1

    Very nice Derrick. It looks very solid all the way around. It sounds like it is going to be very loud in there. That last piece you did had a lot of test fitting and trimming done on it. It looks great though. Who cares if it's not square and gaps. Those are easy fixes. Mine definitely wasn't square in the Kia. Had a lot of filling in gaps and a lot of grinding to get it to fit right. Looking forward to the next update man.

  • @KurTzyGG
    @KurTzyGG 5 років тому +1

    Now we're talking. Awesome vid update Derrick 👌 Really curious on how this turns out.

  • @MaruSama
    @MaruSama 2 роки тому +1

    So I want to do my own with only basic knowledge (I know everything about electronics and about Calculating Boxes, tuning them and Orders). But I do wonder about the Walls and Windows. Is it fine to just put Expander Foam between the Walls and the Windows? Or is some other Preperation needed?
    Just found your Video and I love the Detail you put in it! :)

  • @justinvanburen8259
    @justinvanburen8259 5 років тому +2

    Great work!! Keep it up, how much does the 16# foam expand?

  • @brycelawmaster3746
    @brycelawmaster3746 5 років тому +1

    how are you planning on water proofing the under side of the box?

    • @UnofficialAudio
      @UnofficialAudio  5 років тому

      Gonna spray it all with bedliner to protect from the elements

    • @brycelawmaster3746
      @brycelawmaster3746 5 років тому

      @@UnofficialAudio just my opinion " and u know what they say about opinions" but I would have treated the bottom layer before it was installed so there wouldn't be any untreated spots between the frame and the box

  • @jaredappleseed7037
    @jaredappleseed7037 5 років тому +1

    👍👍

  • @akirk2089
    @akirk2089 5 років тому +1

    I feel like your making some good progress bro. I'm getting excited and were still on the box. Lol.

  • @10krms8
    @10krms8 5 років тому

    Looking very loud all ready What modelo subs n amps r going in there

    • @UnofficialAudio
      @UnofficialAudio  5 років тому +1

      To start it will be four Sundown Audio U-18" subs and four scv-7500d amps

  • @MetricSun
    @MetricSun 5 років тому

    I I’m thinking about getting 1 SA12, is a 2 cubic foot box the largest ported box that is recommended? I had a L7 12 in a 3.2 cubic box and it played loud and very Deeep. I’m just wanting that deep bass like I had before. I’m planning on running 1200 watts to it. Sealed to front and ported through rear deck. 2015 Accord v6. Thanks

  • @chavycash2518
    @chavycash2518 5 років тому

    Hey is there any liquid that will dissolve the foam? I messed up and now my trunk wont open

  • @mrlovethatbass21
    @mrlovethatbass21 5 років тому +1

    Can that foam be sprayed as well ?

    • @UnofficialAudio
      @UnofficialAudio  5 років тому +1

      It qould be tricky mixing it into something then spraying it out. There isnt much working time before it starts expanding.

  • @ColdVenom159
    @ColdVenom159 5 років тому +1

    Gotta say man that is one thick as fuck enclosure lol, more i see the update videos on it more im looking forward to seeing that monster speak, With how its being built il be surprised if it dont hit 170+ db. Wish there were places up here where i could put my setup on a meter lol. i know im pushing close to 160 db specially with my new amp.

  • @joseg4061
    @joseg4061 5 років тому +1

    Hell yea

  • @COMPASBASSCHICALI
    @COMPASBASSCHICALI 5 років тому +1

    Thanks bro for the short video. I was leaving hone to work when I saw the length of the vid and I went no way😅

    • @UnofficialAudio
      @UnofficialAudio  5 років тому

      Haha gonna try to keep the future updates small in the 15min or so range

    • @COMPASBASSCHICALI
      @COMPASBASSCHICALI 5 років тому

      @@UnofficialAudio Hahha👍 30+ min is like let me get a cold one to sit down and enjoy😅

  • @HKE_
    @HKE_ 5 років тому +5

    Be carefull so the foam doesn't push the windows out when it expands though.
    And the screws that are to long, just cut them with the angle grinder.

    • @UnofficialAudio
      @UnofficialAudio  5 років тому +1

      I'll pour the foam in small batches

    • @HKE_
      @HKE_ 5 років тому

      @@UnofficialAudio Cool beans! I'm sure you would have it under controll, but it doesn't cost me anything to point it out just if...
      Keep on keepin on!

    • @mpugne
      @mpugne 5 років тому

      It also has a very low expansion rate also. The big kit only expands to aroud 5cuft, in 2lb density it fills around 40cuft.

  • @johnsmith-qz4bv
    @johnsmith-qz4bv 4 роки тому

    nice

  • @anthonyhunter5031
    @anthonyhunter5031 5 років тому

    What instrumental is that playing in the background

  • @rodamik
    @rodamik 5 років тому

    The foam wont bust out the windows when it expands?

  • @michaeljordan1837
    @michaeljordan1837 5 років тому

    So if I bought 2 team's 18s and 2 7500.1 would y'all build my box

  • @garychaney9177
    @garychaney9177 5 років тому

    I want a wall in my Altima , is that possible?

  • @STR8CLPN
    @STR8CLPN 5 років тому +1

    💪💪💪💪💪💪

  • @thenotoriousrvh6091
    @thenotoriousrvh6091 5 років тому +2

    Damn your making some progress !! Is there no way to pop those side windows out to foam it in ? I'm probably the 1 person that watched the whole long video.
    Most UA-cam watchers have very short attention spans lol.

    • @UnofficialAudio
      @UnofficialAudio  5 років тому

      The windows have to be in the hold the foam in place

    • @thenotoriousrvh6091
      @thenotoriousrvh6091 5 років тому

      @@UnofficialAudio Right, but was thinking it'd be easier to make sure you got good coverage below the window line. Then make a wood template the size of the glass, use that in place of the window. Then when the foam has cured scrape away just enough foam to put the window back in. Wouldn't that insure better coverage with out worrying about too much popping the windows ? Just a thought.

  • @TBONESIDEOFLIFE
    @TBONESIDEOFLIFE 5 років тому +4

    𝒏𝒆𝒆𝒅𝒔 𝒎𝒐𝒓𝒆 𝒄𝒐𝒘𝒃𝒆𝒍𝒍. 😆𝒉𝒂❟𝒉𝒂❟ 𝒃𝒖𝒕 𝒍𝒐𝒐𝒌 𝒗𝒆𝒓𝒚 𝒘𝒆𝒍𝒍 𝒔𝒐 𝒇𝒂𝒓.👍

  • @nuclearbum9858
    @nuclearbum9858 5 років тому

    bandpass or ported

  • @eddieyocom5140
    @eddieyocom5140 5 років тому +1

    boiiiing boiiiing THUD.

  • @COMPASBASSCHICALI
    @COMPASBASSCHICALI 5 років тому

    Why you went 2 half layer and then 1 complete one?

    • @UnofficialAudio
      @UnofficialAudio  5 років тому

      I'm guessing you mean on the floor. It was to use up some big "scrap" pieces I had that would fit it that space perfect. Being two separate pieces won't effect strength since its stacked in with 8 layers of wood. If you're talking about in the back of the truck its because big solid sheets won't fit in the rear opening. Had to split the pieces up and, again, using up some big scrap sections that will fit in there nicely.

    • @COMPASBASSCHICALI
      @COMPASBASSCHICALI 5 років тому

      @@UnofficialAudio I got you! And yes I mean on the floor👍

  • @jeremytauer3868
    @jeremytauer3868 5 років тому

    441 FTW!!!

  • @Supercharged1976
    @Supercharged1976 5 років тому

    Why didn't you remove the rear side windows for access to the sides then just weld some metal in their place? Too much work vs just drilling a hole and pouring?

    • @UnofficialAudio
      @UnofficialAudio  5 років тому

      Drilling a hole and pouring it in is pretty simple. Can't get much easier than that.

  • @colewoodruff603
    @colewoodruff603 5 років тому

    Damn bro that thing gunna be strong af, are you gonna even need any bracing lol.

  • @johnalenwork53
    @johnalenwork53 5 років тому +4

    THIS RIG IS GOING TO BURP STUPID NUMBERS!!!!!

    • @UnofficialAudio
      @UnofficialAudio  5 років тому +1

      :fingerscrossed:

    • @jakec79
      @jakec79 5 років тому +1

      Do you have a number you’d like to see?

    • @monsieurskar7173
      @monsieurskar7173 5 років тому

      Is it just a burp vehicle? Numbers are cool but I like full tilt demo vehicles more :-)

  • @cboyamg
    @cboyamg 5 років тому

    If you want to build it strong you should start by making sure your angle cuts are at the right angle so they butt up against each other completely... The way you have them now they are crooked AF and have mad gap. When done correctly you can achieve the same results with less material.... Little details like that is what separates the pros from the rookies

    • @UnofficialAudio
      @UnofficialAudio  5 років тому

      And sometimes it just doesnt matter. Definitely make sure you check out the next update vid though.

  • @Fackler91
    @Fackler91 5 років тому +1

    Where's dave at? Lol

    • @UnofficialAudio
      @UnofficialAudio  5 років тому +1

      By the time I'm doing this he's either at home or the gym. All this work is after hours.

  • @1-Six-dee
    @1-Six-dee 5 років тому

    To trim all that spray from man if u don't have a mutli tool or the vibrating saw u need to get one they r great and pretty cheap these days y can carve that spray foam. Like a artist with one

    • @1-Six-dee
      @1-Six-dee 5 років тому

      @@UnofficialAudio I can gurantee u if u buy this tool u will never regret it I bought one about four years ago and it is still working I use it about everyday cost less than 120

  • @MoDzAudio
    @MoDzAudio 5 років тому +1

    Bro you sure you used enough glue? I really dont think you did man.

  • @jbb5266
    @jbb5266 5 років тому +1

    Dude I fuck with the long videos. Muh fuckers can fast forward

  • @akirk2089
    @akirk2089 5 років тому +1

    Not even gonna front I'm watching it twice

  • @herbyverstink
    @herbyverstink 5 років тому +1

    safest place to be in an earthquake is in that box

  • @u9Nails
    @u9Nails 5 років тому

    Make your videos how you would want to watch them. F*k the jokers who tell you how to make *your* videos; shorter, longer, with more explosions... You can't please them all, so do what you like.

    • @UnofficialAudio
      @UnofficialAudio  5 років тому +1

      Its all good. Last one was kinda long so I agree with that. Didn't mean for it to get that long so gonna make sure to keep them within a reasonable 15-20min from now on.

  • @ToiletduckX
    @ToiletduckX 5 років тому

    This guy needs to do his homework....

    • @UnofficialAudio
      @UnofficialAudio  5 років тому +2

      Even when i was in school i didnt do any homework

    • @ToiletduckX
      @ToiletduckX 5 років тому

      @@UnofficialAudio ;)

  • @davef.566
    @davef.566 5 років тому

    hello maybe contact your congressman to get some moneys:-) :-) to build your wall :-) :-) :-) like trump is doing:-) :-) :-)