This is what I like about Ruiraptor we always get a deep dive review covering areas other reviewers dont and I applaud you for it, I was delighted to see that the SD card is able to be inserted the correct way up, I have a dilemma in that I have my money down for a Prusa XL but I so want one of these!
Personally the Prusa XL is more advanced than this in basically every way other than the LIDAR system which isn't actually true LIDAR its more than likely a CMOS sensor at this price point. Stick with the XL and don't get swayed by all the publicity .
Thank you. this is one of the only videos that I found that even mentioned the sd card and the only video that actually showed someone inserting it. Its a bit tough to insert and I didnt want to accidentally break the $150 screen trying to put the sd card in, Thank you for the simple yet reassuring video, definitely earned a like and sub
Never seen anyone show that you could turn on the display with that button either, in fact one youtuber was afraid she would interrupt the print when tapping the screen mid print. Apparently you don't need to do that.
@@atnfn Huh!!! 😍 I had a power outage last night in the first 1/3 of my rather large print… can’t even tell you how scared I was to even look what happened inside of the chamber. To my astonishment, when I turned the printer on, the option to resume was granted - and it finished the job successfully!!!
Could you please do a video on how to set up the printer or slicer to print one color up to a certain height, then switch to a different color through the rest of the print. Such as a 3mm thick black rectangle with white lettering on top. I've tried to paint with height,but can't get it to work like I want.
Good video! I cannot realize any difference when enable/disable the "Video" button in the General menu. Which video is enabled/disabled? Even when disabling i can see the video stream from the inside camera.
Could you make a video on the slicer and what is it exactly is it a downloadable software? Or a website? I’m strictly an iPad user and my only issue is when it’s time to slice a model I have to pull out my laptop. But I run a print farm completely remotely. I’m backing this project no matter what tho !!! Thank you for these videos!
LOL... I am laughing at the fact one of the speed settings is "Ludicrous." I wonder if any of the designers or programmers is a fan of the movie Spaceballs! ??? ...hey now there's an idea for a new product: "Spaceballs! The 3D printer!" (Kids will love this one.) Moichandising, moichandising!
Love to see my mini scraper all over Bambu reviews 5:37 =) Wish Bambu replied to my emails...10 emails over 5 months and still no reply... Prusa replies in 24 hours... All I'm gonna say =)
For anyone who wants to join Bambu Lab's official Discord server, here is the non-expiring invite link. Feel free to talk directly with Bambu Lab employees and demo users, as well as discuss your excitement and curiosities about X1/X1-Carbon/AMS and anything else that interests you! discord.gg/Jmby9N4t8E
This is what I like about Ruiraptor we always get a deep dive review covering areas other reviewers dont and I applaud you for it, I was delighted to see that the SD card is able to be inserted the correct way up, I have a dilemma in that I have my money down for a Prusa XL but I so want one of these!
Hi Andrew, thank you so much for your comment 🙂
Personally the Prusa XL is more advanced than this in basically every way other than the LIDAR system which isn't actually true LIDAR its more than likely a CMOS sensor at this price point. Stick with the XL and don't get swayed by all the publicity .
The most comprehensive and informative guide on UA-cam regarding Bambi X1 printer. Thank you so much, Rui! 😍
Thank you. this is one of the only videos that I found that even mentioned the sd card and the only video that actually showed someone inserting it. Its a bit tough to insert and I didnt want to accidentally break the $150 screen trying to put the sd card in, Thank you for the simple yet reassuring video, definitely earned a like and sub
Never seen anyone show that you could turn on the display with that button either, in fact one youtuber was afraid she would interrupt the print when tapping the screen mid print. Apparently you don't need to do that.
@@atnfn Huh!!! 😍 I had a power outage last night in the first 1/3 of my rather large print… can’t even tell you how scared I was to even look what happened inside of the chamber. To my astonishment, when I turned the printer on, the option to resume was granted - and it finished the job successfully!!!
Thanks! This exactly what I wanted to see! I remember you back from when you did Tevo Tornado videos - top notch content! 👊
Hi, thank you for your comment and also for your support 😊
Could you please do a video on how to set up the printer or slicer to print one color up to a certain height, then switch to a different color through the rest of the print.
Such as a 3mm thick black rectangle with white lettering on top.
I've tried to paint with height,but can't get it to work like I want.
Good video! I cannot realize any difference when enable/disable the "Video" button in the General menu. Which video is enabled/disabled? Even when disabling i can see the video stream from the inside camera.
Hi, that enables/disables the recording of the video on the memory card. If you enable it, it will record everything to the memory card.
Could you make a video on the slicer and what is it exactly is it a downloadable software? Or a website? I’m strictly an iPad user and my only issue is when it’s time to slice a model I have to pull out my laptop. But I run a print farm completely remotely. I’m backing this project no matter what tho !!! Thank you for these videos!
Hi, we are currently working on the slicer software video. It should be online soon ;)
@@ruiraptor y’all are awesome!
Thanks Daniel D 🙂
Çok faydali bir videoydu teşekkürler
For a 1 color print is it possible to choose any of the 4 filaments loaded in the AMS?
Yes
Yes, you can choose which filament/filament slot to use.
@@sdqf Thanks. It seems like a no brainer but I wanted to be sure.
@@ruiraptor That is going to be a great feature!
You can check the next video where we will explain a few more things and that is included 😉
LOL... I am laughing at the fact one of the speed settings is "Ludicrous." I wonder if any of the designers or programmers is a fan of the movie Spaceballs! ???
...hey now there's an idea for a new product: "Spaceballs! The 3D printer!" (Kids will love this one.) Moichandising, moichandising!
possibly a fan of Tesla
how do you delete the warning messages from the display. I have a red dot showing "unread" measages but I have read them and i want to delete them.
Tem menu em pt essa maquina?
Love to see my mini scraper all over Bambu reviews 5:37 =) Wish Bambu replied to my emails...10 emails over 5 months and still no reply... Prusa replies in 24 hours... All I'm gonna say =)
For anyone who wants to join Bambu Lab's official Discord server, here is the non-expiring invite link. Feel free to talk directly with Bambu Lab employees and demo users, as well as discuss your excitement and curiosities about X1/X1-Carbon/AMS and anything else that interests you!
discord.gg/Jmby9N4t8E