Te pasaste, gracias por los ánimos, si tengo pensado seguir subiendo videos! Yo creo que empezarán a variar también, no solamente de builds sino también videos hablados en su momento, estoy abierto a ideas
Hey, I have been searching parts for a 40% built for the past weeks. I was wondering if you could list the parts of this build. It is just what I am searching for. Really nice UA-cam chanel happy to be in the first 50 subs.
Yep, late. Case: es.aliexpress.com/item/32847563433.html?gatewayAdapt=glo2esp Pcb: es.aliexpress.com/item/32831965170.html?gatewayAdapt=glo2esp The switches are a Frankenwitch called "Creamsicles", made with the top and bottom housing of tangerines, nk cream steam, and I swapped the springs to some of vintage mx blacks, I think they are the same as the new ones, idk. They were filmed and lubed with Krytox (205g0). The keycaps are from Thekey.company. Durock Stabs V1. Thank you!
Hi. You can skip that part if the pcb is "hot swap", wich means that you can put your switches just with pressure, and then you can change them very easily. At the end, depends on the type of pcb
Hey do you know if you could link the sizes or the actual link to the O-Ring you used Oye, ¿sabes si podrías vincular los tamaños o el enlace real a la junta tórica que usaste?
First of all, hi! Those are the katakana alphas by the key dot co (Out of stock ricght now), and the white ones are a full set of the "Keyreative blank keyset", you can choose the color
hey, not the uploader but I believe they used GMK katakana for the alphas and some white blank keycaps (possibly from an ergo keycap set) for the mods.
Buena amigazo! Es buena idea lo de las expectativas, sinceramente nunca lo he hecho, pero creo que igual daría juego, como para hacer un video hablado! Lo dejaré como idea a futuro, muchas gracias
The pcb has a ucb mini, yes. About the soldering....I keep getting that question, and I don't know why, there is a part on the video where I solder the pcb. Yes, you have to Greetings
Great build! Do you know how to flash the firmware and create my own keymap on this board? Is it qmk compatible? Or do I have to use tkg tools (which I have never used before)?
Great question! But I do not have the answer sadly...I search it on qmk and there is a firmware for it! But I have never used it...you can ask on this Discord channel! discord.gg/nxQwgaKgth Is a 40% group
hey, great video! you've made me want to try out this board for myself. can I know if the space between the pcb and the bottom case is very large? is there a lot of dead space within the case? thank you!
Hi! these ones: Case: kprepublic.com/products/anodized-aluminium-case-for-daisy-40-hhkb-layout-custom-keyboard-acrylic-diffuser-can-support-daisy?_pos=5&_sid=f599a10f8&_ss=r And the keycaps are a combination of the blanks from thekey.company/, the alphas (katakana IFK WHITE ON BLACK (WOB) KEYSET) from the same store, are out of stock right now :(
Se ve que es un teclado robusto, y realmente se ve y suena genial!! Tengo una pregunta para hacerte, podrías decirme como se llama ese set de keycaps? estoy pensando en armarme un 40% tambien y se ven increibles. Saludos
Hola, imagino que te refieres a las wob katakanas, puedes revisar thekey.company/, ya que están agotadas desde hace tiempo, y las mías las pude comprar por eBay. Las blanks, las puedes encontrar en la página, las recomiendo mucho
I've got 2 PCBs of this keyboard and both of them has one same key that doesn't work when I tested with a tweezers. Did you encounter any issue like this? Also great looking keyboard you have there.
Hi, and sorry for the late response! hmmm, when I have to solder a new pcb, that's actually what always scares me. But, in this case, the pcb works perfect!
Hey man not sure if this is too late but I think that might be the Fn Key, which doesnt show up on when u test them with tweezers. You have get 2 tweezers, hold the function key down with another key (e.g. Fn + 1) to see if it works! Had the same issue with my build and scared the crap outta me, but it turns out that i wasn't a faulty board.
@@teojoel6985 a bit late but thanks for the advice. I've managed to solve the problem by flashing the pcb. Well now I got 5 spare Daisy for future projects :D
Muy buen video en general, agradable no muy largo, además de las excelentes ideas para los mods y para rematar una prueba de sonido ufff exquisita. Mucho éxito con el canal!! Tenia dos consultas relacionadas con los mods 1) Para que es la cinta en la parte inferior de la pcb? para proteger o cumple alguna otra función?? 2) Donde se pueden comprar y que medida son los o'rings ? (De ser mas menos estándar, lo encontré una idea genial para amortiguar un poco el sonido). Muchas gracias!
Muchas gracias por el comentario! Que bueno que hayan preguntas jajaj, mira! Con respecto a lo primero; hace un tiempo se hizo popular un mod conocido como el "tape mod" y es basicamente eso! Se coloca cinta en la zona inferior de la pcb, puedes buscar en youtube más videos, o lo puedes probar tú! Es muy simple y barato, y ayuda a cambiar el sonido. Hay un video en youtube (inglés eso si), que explica un poco la ciencia de esto! Y podrías entenderlo mejor. Con respecto a la segunda pregunta, hay un momento en el video donde muestro la bolsita de los o rings, ahí sale la medida! Aquí de todas maneras está el link! (Si no puedes verlo, me mandas un mensaje por instagram @yeyo_clack) a.aliexpress.com/_mMgZkHd
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Excelente video e increíble teclado, sigue con el buen trabajo bro
Te pasaste, gracias por los ánimos, si tengo pensado seguir subiendo videos! Yo creo que empezarán a variar también, no solamente de builds sino también videos hablados en su momento, estoy abierto a ideas
Hey, I have been searching parts for a 40% built for the past weeks. I was wondering if you could list the parts of this build. It is just what I am searching for. Really nice UA-cam chanel happy to be in the first 50 subs.
Yep, late.
Case: es.aliexpress.com/item/32847563433.html?gatewayAdapt=glo2esp
Pcb: es.aliexpress.com/item/32831965170.html?gatewayAdapt=glo2esp
The switches are a Frankenwitch called "Creamsicles", made with the top and bottom housing of tangerines, nk cream steam, and I swapped the springs to some of vintage mx blacks, I think they are the same as the new ones, idk. They were filmed and lubed with Krytox (205g0). The keycaps are from Thekey.company. Durock Stabs V1.
Thank you!
@@yokaicl what plate
@@robertochannel3847 I think that the build doesn't needs plate
@@R4FICA i remember that the daisy can either platelets or top mount
The plate comes with the case
where did you find the plate cause im having trouble finding a top mount plate
hey, do im trying to build my own keyboard and i was wondering if i really need to do all the soldering or can i skip that part
Hi.
You can skip that part if the pcb is "hot swap", wich means that you can put your switches just with pressure, and then you can change them very easily.
At the end, depends on the type of pcb
Where do you get the kit?
What was the keycaps you used?
What were the o-rings for? Do they come with the PCB or case?
can you tell me which stabilizer did you use?
no stabs? And can you give the links for all the parts
Hey do you know if you could link the sizes or the actual link to the O-Ring you used
Oye, ¿sabes si podrías vincular los tamaños o el enlace real a la junta tórica que usaste?
es.aliexpress.com/item/32956003182.html?spm=a2g0o.9042311.0.0.274263c0bDs1bN That's the link! and the sizes are 4x1x1,5 mm
Greetings!
@@yokaicl thanks
Cuales son las medidas del teclado bro?
what cable are you using? i have the daisy too but have a shitty cable and im looking for a new one!
Sorry for late response!!! The cable is from the same store, Kprepublic
software for keyboard?
What key caps
First of all, hi!
Those are the katakana alphas by the key dot co (Out of stock ricght now), and the white ones are a full set of the "Keyreative blank keyset", you can choose the color
@@yokaicl thank you so much
Hey, I was wondering what keycaps those are they look amazing and I was planning on using the same board.
hey, not the uploader but I believe they used GMK katakana for the alphas and some white blank keycaps (possibly from an ergo keycap set) for the mods.
@@fallasleeq Tysm!
Medios temones para un video fenomenal.
Has pensado en poner tus impresiones o expectativas al principio del video?
Buena amigazo! Es buena idea lo de las expectativas, sinceramente nunca lo he hecho, pero creo que igual daría juego, como para hacer un video hablado! Lo dejaré como idea a futuro, muchas gracias
how much did you spend on the keyboard ? BTW I WAS WONDERING IF I CAN BUY THIS KEYBOARD OF YOU BUT IF IS NOT FOR SALE THE IS OK
What keycaps?
Thekey.company
Is the pcb hotswap?
No, I solder the pcb in the video
I have 2 questions
1) Do you use mini usb cable?
2) Do I need to solder pcb?
The pcb has a ucb mini, yes.
About the soldering....I keep getting that question, and I don't know why, there is a part on the video where I solder the pcb. Yes, you have to
Greetings
@@yokaicl Thanks for answer
hi dude, what's ur deskmat ? and where did u get it ?
nice vid btw ;-)
Hi! And thank you. This is the gmk bento deskpad, in salmon color! You can search it
Great build! Do you know how to flash the firmware and create my own keymap on this board? Is it qmk compatible? Or do I have to use tkg tools (which I have never used before)?
Great question! But I do not have the answer sadly...I search it on qmk and there is a firmware for it! But I have never used it...you can ask on this Discord channel! discord.gg/nxQwgaKgth
Is a 40% group
@@yokaicl thank you very much for your reply! I definitely will check out the 40% discord server :)
@@yokaicl where did you buy the keycaps? I cant find them anywhere :(
@@wimpiii507 I bought the katakana ones on ebay, since they are sold out in the web. You can check thekey.company/
@@yokaicl thanks a lot:)
Hola! Increible como quedó el teclado😵😵, tengo una duda, la pcb es hotswap? y necesitas soldar cada agujerito?
Hola! La pcb no es hotswap! Es para soldar. Es la daisy 40% y claro hay que soldar cada switch por separado
@@yokaicl aaaaaamigoo okay gracias!!
hey, great video! you've made me want to try out this board for myself. can I know if the space between the pcb and the bottom case is very large? is there a lot of dead space within the case? thank you!
Yes! It depends how you like the feeling of the board ofc, but yeah, there is considerable dead space
keycaps and case?
Hi! these ones:
Case: kprepublic.com/products/anodized-aluminium-case-for-daisy-40-hhkb-layout-custom-keyboard-acrylic-diffuser-can-support-daisy?_pos=5&_sid=f599a10f8&_ss=r
And the keycaps are a combination of the blanks from thekey.company/, the alphas (katakana IFK WHITE ON BLACK (WOB) KEYSET) from the same store, are out of stock right now :(
Se ve que es un teclado robusto, y realmente se ve y suena genial!!
Tengo una pregunta para hacerte, podrías decirme como se llama ese set de keycaps? estoy pensando en armarme un 40% tambien y se ven increibles. Saludos
Hola, imagino que te refieres a las wob katakanas, puedes revisar thekey.company/, ya que están agotadas desde hace tiempo, y las mías las pude comprar por eBay. Las blanks, las puedes encontrar en la página, las recomiendo mucho
I've got 2 PCBs of this keyboard and both of them has one same key that doesn't work when I tested with a tweezers. Did you encounter any issue like this? Also great looking keyboard you have there.
Hi, and sorry for the late response!
hmmm, when I have to solder a new pcb, that's actually what always scares me. But, in this case, the pcb works perfect!
Hey man not sure if this is too late but I think that might be the Fn Key, which doesnt show up on when u test them with tweezers. You have get 2 tweezers, hold the function key down with another key (e.g. Fn + 1) to see if it works! Had the same issue with my build and scared the crap outta me, but it turns out that i wasn't a faulty board.
@@teojoel6985 a bit late but thanks for the advice. I've managed to solve the problem by flashing the pcb. Well now I got 5 spare Daisy for future projects :D
hola tremenda pieza
una duda dudosa, me quiero comprar uno, peeero queria saber si viene con estabilizadores y hay que cómpralos aparte XD
Hola! Cuando compras la pcb, te da la opción para elegir si quieres con o sin stabs, son genéricos, clip in, pero deberían servir sin problemas
@@yokaicl ooo ya, muchas gracias
Muy buen video en general, agradable no muy largo, además de las excelentes ideas para los mods y para rematar una prueba de sonido ufff exquisita. Mucho éxito con el canal!!
Tenia dos consultas relacionadas con los mods
1) Para que es la cinta en la parte inferior de la pcb? para proteger o cumple alguna otra función??
2) Donde se pueden comprar y que medida son los o'rings ? (De ser mas menos estándar, lo encontré una idea genial para amortiguar un poco el sonido). Muchas gracias!
Muchas gracias por el comentario! Que bueno que hayan preguntas jajaj, mira! Con respecto a lo primero; hace un tiempo se hizo popular un mod conocido como el "tape mod" y es basicamente eso! Se coloca cinta en la zona inferior de la pcb, puedes buscar en youtube más videos, o lo puedes probar tú! Es muy simple y barato, y ayuda a cambiar el sonido. Hay un video en youtube (inglés eso si), que explica un poco la ciencia de esto! Y podrías entenderlo mejor.
Con respecto a la segunda pregunta, hay un momento en el video donde muestro la bolsita de los o rings, ahí sale la medida! Aquí de todas maneras está el link! (Si no puedes verlo, me mandas un mensaje por instagram @yeyo_clack)
a.aliexpress.com/_mMgZkHd
Consulto, dónde compraste los Creamsicles? Bonito video por cierto
Gracias por lo último