Your videos are well done. Thank you for taking the time to do these videos. They are very helpful for those of us needing encouragement and information to do these services ourselves.
Hi Mark, as always a nice and interesting video. Thanks for that, even though I have an automatic transmission. I'm always waiting for your new clips here. Greetings from Germany, where we're waiting for the spring weather.
Having watched this video, I have just changed the gearbox oil on my 2000 Z3 2.8 using the Redline D4 ATF oil that you recommended. Much smoother changes now. Thanks for the advice.
Just did my transmission fluid using Valvoline Synchromesh for my Getrag 5 speed manual. Easy process, took my time. Mine was about 38 oz, but then it overflowed a bit, started dripping and had to keep wiping it for a few minutes until it quit. Easy job. I have a special work environment, I used my garage in floor tornado shelter, which doubles as a maintance bay for working under my car- no jacking required! Worked great for diff fluid and transmission! Thanks for the tutorial Mark! @MomentOfZed
I wound up purchasing another manual transfer pump for the transmission fluid, different from the on that I used for differential fluid. They are cheap, didn't have to worry about cleaning it.
A bit of liquid pipe sealant (not tape) on the drain plug threads is good insurance against a leak. After changing the fluid, mine had a very slight leak of maybe a dime-sized spot after a drive that I was able to fix with the sealant. It has never leaked a drop since.
Mark, did you find you needed to top up the oil after the initial fill? In my automatic transmission fill, I turned on the engine and cycled through the gears and was able to add more fluid.
Fortunately i havent had that issue. Did you change the fluid recently? If so is it all the way tightened? Even if you didnt is it all the way tightened? Are the threads clean both sides?
Now that a year has gone by, how would you describe the results of your choice of fluid for this Transmission fluid change? I am not on my journey of deciding which. I have nothing to really go on except to try and match others and go on their results. I have a 98 2.8 Z3
Hi. How long did that take you? I am not the type who does my own fixing. So I asked my friendly neighborhood BMW independent mechanic to check and replace my transmission oil. He said it is a “time consuming process.” So I want to cross check with you. Thanks. Awesome video as always.
Back under the differential. Dead center don't stress the cover. Front under the crossmember, but not the x brace!! See coolcat Terri's channel for a full video.
Good video. Nicely done. Just want to add I use the Red Line MTF. When I also used the Red Line ATF, did not like it. Switched to the MTF. Much nicer shifting. Currently at 361,000 on my 2000 2.3. Still going strong.
Your videos are well done. Thank you for taking the time to do these videos. They are very helpful for those of us needing encouragement and information to do these services ourselves.
Thanks for the kind words and for watching!
Dude your videos are amazing! You have helped me a lot with a Z that was stopped for 20 years 🤯!
Thanks! Sounds like a great project!
Thank you for the video, now I know why it is little hard to shift into reverse
Hi Mark,
as always a nice and interesting video. Thanks for that, even though I have an automatic transmission.
I'm always waiting for your new clips here.
Greetings from Germany, where we're waiting for the spring weather.
Having watched this video, I have just changed the gearbox oil on my 2000 Z3 2.8 using the Redline D4 ATF oil that you recommended. Much smoother changes now. Thanks for the advice.
Glad to hear and thanks for watching!
Just did my transmission fluid using Valvoline Synchromesh for my Getrag 5 speed manual. Easy process, took my time. Mine was about 38 oz, but then it overflowed a bit, started dripping and had to keep wiping it for a few minutes until it quit. Easy job. I have a special work environment, I used my garage in floor tornado shelter, which doubles as a maintance bay for working under my car- no jacking required! Worked great for diff fluid and transmission! Thanks for the tutorial Mark! @MomentOfZed
I wound up purchasing another manual transfer pump for the transmission fluid, different from the on that I used for differential fluid. They are cheap, didn't have to worry about cleaning it.
@johncagle3362 thanks for watching! Wish I had that!
Nice job mate. Great advice about the replacement fluids too. There are plenty of options that meet or exceed BMW's original fluid specification 👍🏾
Thank you and thanks for watching!
A bit of liquid pipe sealant (not tape) on the drain plug threads is good insurance against a leak. After changing the fluid, mine had a very slight leak of maybe a dime-sized spot after a drive that I was able to fix with the sealant. It has never leaked a drop since.
Thought about that. If mine leaks thats the plan.
How is the car shifting now? Have you noticed any slipping?
I literally was about to do this tomorrow on my 97 2.8
Great video! Also thank you for referencing my video I appreciate it!
Thank you! You're doing good work, keep it up!
Thanks another interesting video. Perfect lunchtime release and length. 👍
Thank you as always!
Hello, tanks for this new video. Do you feel any improvement after the oil change ? Regards, Jérome.
Yes shifting smoother especially N to 1st and 4th to 5th.
can someone tell me why the digital clock on my "97 sounds an alarm and shows me temp when it is 37 degrees outside or less? thanx for the videos
Scared the crap out of me the first time it went off. Done to warn you icy conditions are possible. Not a malfunction or problem.
Mark, did you find you needed to top up the oil after the initial fill? In my automatic transmission fill, I turned on the engine and cycled through the gears and was able to add more fluid.
Have to admit haven't had it back up to check.
My transmission is leaking fluid from the drain plug. Do you think replacing the drain plug would fix it? Any experience with that?
Fortunately i havent had that issue. Did you change the fluid recently? If so is it all the way tightened? Even if you didnt is it all the way tightened? Are the threads clean both sides?
Thanks for the video. Very didactic and very useful.
Thank you for watching and using didactic!
Another really useful video!! Thank you :)
Thank you for watching!
Now that a year has gone by, how would you describe the results of your choice of fluid for this Transmission fluid change? I am not on my journey of deciding which. I have nothing to really go on except to try and match others and go on their results. I have a 98 2.8 Z3
Happy still and no current problems. Shifts well, no noises.
Hi. How long did that take you? I am not the type who does my own fixing. So I asked my friendly neighborhood BMW independent mechanic to check and replace my transmission oil. He said it is a “time consuming process.” So I want to cross check with you. Thanks. Awesome video as always.
If i had a lift it would have been an hour. Warmup, lift, drain, refill. Good luck with it! And thanks for the kind words!
Your undercarriage looks so clean, do you wash it?
How did you manage to get the car on those four jackstands? At what places under the car did you jack up the car?
Back under the differential. Dead center don't stress the cover. Front under the crossmember, but not the x brace!! See coolcat Terri's channel for a full video.
Hi, Can you Please tell me how many bottles of oil are needed for one fill?
@@tadinhchuong manual or auto?
Manual sir.
@@tadinhchuong 1.25 quarts is what mine took
@@MomentofZedthanks bro
Did you feel a difference when shifting?
Yes smoother especially N to 1 and 4th to 5th.
Good video. Nicely done. Just want to add I use the Red Line MTF. When I also used the Red Line ATF, did not like it. Switched to the MTF. Much nicer shifting. Currently at 361,000 on my 2000 2.3. Still going strong.
@@markbigelow1849 thank you! That's a lot of miles!! I'm willing to try the mtf next time.
Is changing oil going to help with changing the gears? 0:05
Yep, much smoother gear changes for both manual & auto gearboxes.
Jeez 9:15 thats one dirty drain hole. You can hear it crunching
Sound effects
Are you supposed the filter and gasket ?
Do you have an automatic?
@@MomentofZed yes, Mines a 2000 z3 2.8. I wish mine was a standard but what can you do lol
I meant change those things by the way
@melissadavis2108 if its a manual you don't have those. You have the automatic?
@@MomentofZed yes it's automatic
Moment of Zed is a trans activist, quintessentially based
Running out of title ideas...
@@MomentofZed I can see "Gearhead" in your title, if you prefer the other I'm out...
@@jimmyk6336 where were you tuesday?😄