2004 GMC Envoy Mods Walk around
Вставка
- Опубліковано 23 лип 2018
- LED Bulbs
Cougar Motor LED Headlight Bulbs... www.amazon.com/dp/B01H6NZ6F2?...
Led bar
48" Redline TRIPLE LED Tailgate Light... www.amazon.com/dp/B01HUJY0AO?...
Led bar connector
CURT 55384 Custom Wiring Connector www.amazon.com/dp/B0009FJ38Q?...
Hitch
RHINO USA Shackle Hitch Receiver,... www.amazon.com/dp/B06WLMF23C?...
Shocks
Bilstein 24103350 Shock Absorber for... www.amazon.com/dp/B00DRYNBN4?...
Spacers
4PCs 38.1mm (2") 6x5 Hubcentric Black... www.amazon.com/dp/B073C5HH68?...
Bullbar
Black Horse Off Road MBS-GMC3005... www.amazon.com/dp/B01EJYXZT0?...
Taillight assembly
GMC Envoy SUV Red Smoked Rear Tail... www.amazon.com/dp/B016EBCS9E?...
Headlight assembly
rover.ebay.com/rover/0/0/0?mp...
Spoiler
2 Pcs Mini Spoiler Auto Car Tail... www.amazon.com/dp/B073ST3SZ4?...
Intake
K&N77-3036KP Polished Performance Air... www.amazon.com/dp/B000CODM0Y?...
Wrap for intake
DEI 010129 Titanium Exhaust Heat Wrap... www.amazon.com/dp/B002R4U7G4?...
Grille www.amazon.com/dp/B00865GOIS?... - Авто та транспорт
Thanks again for posting this and for your terrific feedback! Installed the spacers and the grille on my 2004 and it looks awesome! Many thanks!
Thats awesome to hear man, that makes me happy :D
Lookin real nice with 2” spacers. Got me thinking about getting some for my “04” as well 👍🏼
Is it just to push the tires out? How do you install spacers do you need a lift
I had a set of those blacked out OEM headlights on my '06 Denali, but they were absolute junk. I couldn't adjust the headlights hardly at all, and the mechanism would just strip out if you tried to adjust them. Loved the look though on yours. Thanks for sharing!
Yeah these are basically the same thing. Instead of the little white torqes bit on top, i used a socket to adjust them from behind :P
Hhhh..Finally someone that doesn't overdue it!!..Nice👍🏼
Check mines and see have I over did it
@@listenandreadcarefully9154 LoL...Thats Tight!!
it looks great
Beautiful
I absolutely am digging the grill..classy
just ordered one for my 02.
Bolt right up?
I dig that bar up front!
I have a 2006 GMC envoy.with cat and a Flowmaster series 40 exhaust.and it sounds like your. I need to replace the airbag rear suspension. And I like your wheel spacers. Sharp Envoy
Thanks man :) upload a video of your exhaust
This Custom Royal Blue 2004 GMC Envoy is tight & cool 🆒🆒.
How many inches front and rear? Or is it just a leveling kit for the front?
Well done!
Doing some work on my GMC as well. You should replace the gas cover with a locking one and hood vents. These models have problems with over heating when its hot out. What i did to mine was i added cooling fans to the radiator and lifted the rear of the hood and it most definitely cools down the engine bay. I mainly spaced the hood till i install the vents myself.
That sounds like an awesome idea. It's great to hear you're working on yours too, I'd love to see what you did :)
It isn't that common for them to over heating when hot out. You have other issues. I live in the desert and don't have issues.
Like the look of the wheel spacing. Reading where wheel spacers may loosen over though. Does that concern you and what brand spacers did you purchase? Many thanks
As long as you get the right size snd ones that are hubcentric, you have nothing to worry about. And any brand as long as they tell you what kind of metal they use. Make sure its a good quality metal
Good looking car bud! Quick question, did the air filter mod actually made a difference? do you feel an increase in horsepower?
Yeah man especially around 5k. Like when you floor it, you see it climbing rpms and then at around 5k you feel a kick. Its awesome
Edit: oh and the sound it makes is just amazing
I need one of those Pit Maneuver bars for mine.
They're actually pretty cheap. I wish i had gotten the one with the built in led bar.
nice ride bro. thumbs up
Any performance/engine issues with the air intake mod? Definitely digging your Envoy. I’m starting to slowly upgrade mine, appreciate the help!
No, none at all! It's running really smooth. :) thanks man i appreciate that!
The Upscale hell yeah glad to hear everything is running smooth. I currently have VTEC (original) but afraid I might have engine problems if I upgrade. I love the look when you open the hood
I have an 06 envoy and put dual exhaust mod, but I like that additional brake strip in the back. How did you install? Did it impede the back from opening and closing?
Dual exhaust sounds awesome! The back opens and closes fine. The only thing I didnt like is that it sort of, a little, blocks the top of the bar. For installing, it comes with an adhesive strip on the back, but for mine, it didnt stick so I had to use zip ties 🤣 for the wires, I ran it through the driver brake light, and connected the plug into the back of my towing outlet with an adapter so it hides the wires, I believe I left all the products in the description
@@theupscale7130 if you're interested, Total Flow Mufflers on Amazon is where I got my dual out. Its cheaper than flow masters and sound really good. Just had to take out my spare tire because I didn't have room. My link is below
ua-cam.com/video/Ki77zG8ftfQ/v-deo.html
Had two questions: How did you secure front wheels from moving as you torqued the wheel spacers? And were you able to unsnap the grille clips when inserting that Denali style grille?
I used a screwdriver inside the rotor lol and to take off the grill yeah, it was easy to just unclip them. For the new grill it bolts into the oem grill
@@theupscale7130 LOL! Yeah, I put in one too long and snapped the ABS Sensor and have to replace it! Afraid of breaking the clips to get behind the high-quality plastic stock grille!
Nice
Notice any issues with spacers? Like bearings? And did you have to trim lugs for them to fit.
No issues at all, they've been amazing. I got 2" hub centric ones that were actually good quality ones, you really dont want to go cheap on them. But yeah man, they've been solid, its like they're not even on there.
@@theupscale7130 link to those spacers please, going to put that on my 04 xuv 5.3.
This is great.
Wh we re did you get the Denali grill and did you put it over the existing grill?
search stainless steel grill insert envoy on ebay. just bought one for $51.99
Wow what camera are you recording this with? Its crystal clear lol.
Samsung Galaxy s9 phone :P
Hey I know this video is kinda old, but when installing your straight pipe did you loose horse power? What’s your exact exhaust setup? Looking for some ideas for my envoy 😃
Hey no problem. Honestly I didnt notice any loss when I did it. Honestly it would be pretty safe to say I gained some. It has a HUGE 3 foot muffler in the middle and that big ugly trash can looking resonator in the rear which makes even more restriction. For the set up, it's literally just a cat back straight. I first started with the resonator being cut off. It had made a small, but noticeable difference with sound. But mainly thats for looks. Then i had the oem muffler swapped for a flowmaster super 44, which honestly was perfect. Then after a while, i had that cut off and had a pipe welded in its place. Actually just recently i gutted the entire inside of the envoy and added sound deadening mats and a brand new thicker, plusher carpet than the old carpet. And honestly, now, when i have all the windows closed, its scary how quiet it is inside. But when the windows are open you definitely hear the beautiful i6 sound
The Upscale Thankyou man! I appreciate it! I was learly of just straight piping it because of power but I might just have to say f it and do it lol. Clean looking truck like always
Hate to bug, but the link for the spacers is no longer. Do you have a manufacturer's part number? Sounds like you haven't had any issues with a rough ride or wheel bearings wearing out so would be interested in which ones you've had luck with!
Honestly just any 6x127 HUBCENTRIC wheel spacers that aren't made with super cheap metal. I remember mine was made from all solid metal materials. And make sure they're not like $20 for 4. Something crazy cheap like that, of course will be a risk. I think mine i bought were like $100 -$120. I have had 0 issues these. Just make sure you have them properly torqued down and you'll be good 👍
Questions what were the specific things you did to make it sound like that i know straight pipe and stuff but what else? And what kind of tires are those and is it lifted?
I have a 77 series k&n intake, and I removed the muffler and resonator. Tires are 245/65 r17 Michelin defender ltx m/s. No lift, just 2" wheel spacers to make the tires stick out
The Upscale on man but how did you get it to sit like that?
The Upscale oh and another question if i put a 2” rough country lift only on the front would it sit even with the rear?
can I have the link where you got that grill from?
what size tires and what did you use to tint your tail lights?
These were 245/65r17. Taillights were purchased like that. I believe i got them off Amazon
IT'S A NICE ENVOY WHAT YOU GOING TO DO TO THE BACK ROW SEATS THINKING OF PUTTING SOUNDS ??? I LIKE IT IF SOMEONE ELSE WOULD DO A PROJECT WITH ANOTHER ENVOY BUT BLACK ON BLACK RIMS PAINTING THE SUV BLACK GRILL BLACK RAMMING BARS FRONT AND BACK BLACK LIGHTS COVER 🖤
My envoy is giving me so much hell right now it seems to fall on itself or stays at the same speed just rpm goes up then stays there , but when I ease in to the throttle it gets going above 45 ? Any ideas
That sounds like a transmission problem. When was the fluid last changed? Is it too low or overfilled? I threw a bottle of lucas trans slip fix in and it made a huge difference.
Have you had to do anything on it other than oil changes?
Two mandatory things were water pump and power steering lines rusted out (above strut tower mount) and there were just a bunch of other stuff i wanted to just swap out for just being old.
I have a white envoy, I really love mine. Have you ever had any problem with front end body roll.
One thing that I highly recommend is to get the sway bar end links from suspensionmaxx. They're SO much stronger than the OEM ones and really help with stiffening up handling. Definitely give it a try!
@@theupscale7130 Thanks for replying. 👍🏼
Nice looking truck
Thanks man!
I see you have exhaust wrap on the intake, what difference did it make after doing that?
I didnt do a thorough test but i seen with my scan tool (blue driver) the iat dropped 20 degrees
@@theupscale7130 great to hear, I have the same platform truck. Is your k&n intake the 77 series or 57? (Metal or plastic intake)
@@carlbrooks90 77 metal
@@theupscale7130 thanks. Also you mentioned that its stright piped, is the cat removed also?
@@carlbrooks90 cat is still there :)
envoy nice truck awesome straight pipe and other mods. did some models come with a v8?
Yeah! That was the Denali and the Xl I believe. Thanks man, it means a lot :)
The denali came with a 5.3L V8. I have one. Honestly, unless you are towing/hauling you can do everything you need to do with the I6. There is like a 9hp difference and a decent MPG penalty.
silverado 15 Yes not all XLs came with a V8 and some SLTs have the V8. I’m looking for one.
I have a 2004 gmc envoy and I would like to know where you got your grille
If you'd live anywhere near me I'd give it to you lol. I'm pretty sure i got it off of amazon. It was called like a denali grill insert
What else did u do 2 the exhaust like glass pack ?
Its literally stock heads and cat and everything past the cats is just a 3" pipe :)
I just bought a 2004 GMC Envoy wi/75k.. I got it for a good price (I think) and the only reason I jumped on it is because it’s in such immaculate shape. It’s an absolutely good condition and I know these 4.2L V6 cuz i’ve had a few trailblazers with the vortek engines… I know they’re reliable and easy to work on and basically anything GM and Chevy are the same. My question is does anyone have any recommendations for me to upgrade from stock? It’s the XL, not the Denali version.. wanna do a air intake like he did and maybe new grill, fender flares, 2” spacers if they fit and anything else I can do to get some extra kick outta the motor haha
I have a few more videos on mods i did to the envoy, I'd suggest checking them out! The main two that really made a huge difference were removing the mechanical fan clutch for an electric fan kit, and a pcm tune. Bothel were from PCMofNC.
Oh I thought you had spacers on the front
What kind of lift do you have on it?
I dont have one :P I do have new shocks and struts though? I have bilstein rear shocks and moog front struts.
Where did you get the hitch cover??
I left a link in the description
I have a 04 envoy how did u get urs to remote start
A shop put in a remote starter in it
Was it difficult to replace halogen for leds?
Hell no, it took less than 5 mins for both :)
Every how to video I see shows that the leds won’t fit with the boot covering the original halogen bulbs , I want to upgrade to leds but not sure how to make it all fit.
Could you recommend a solution? Thanks.
@@jalenm7343 mine stuck out a little past the housing, but it still fit back into place.
How did you put the grille on?
That was a little plate i just lay over the oem grill. It has long bolts and a T end that hooks into the grills going across. I actually still have it, for some reason lol
Hi where did you get the LED bulbs
Those specific ones were off Amazon. You need sizes 9005 & 9006 for high and low beams :) I like the cougar motors specifically but any brand will work
WHY did you add wheel spacers?
Looks cool to me
What size are your tires here?
245/65r17
@@theupscale7130 Thanks. They looked like a bigger size than stock. I guess not.
@@skankytrick maybe it was the brand of tire? Those were Michelin defender ltx m/s
Black Grill?
V6 or v8? Front wheel drive or 4wd? How many miles? Do you like it?
I6 (inline 6) 4wd. 167k fucking love it ❤
I'm looking at buying one...I rented a brand new one and it rocked!...the 04 to 2016 look all about the same
@@showgirlsaroundtheworldada4484
I believe that GM stopped making the Envoy in 09' did you rent an Acadia or Terrain?
This is very obviously a I6
And they’re never front wheel drive.
Tinted the windshield?
Yeah. You know, like the tints on the side, i got it for my windshield for 50% tint
@@theupscale7130 can you see through them?
Muy bonita Como se el precio
All terrain tires
Remove the roof rack and why did u remove the rear seats ?
At the time I removed my running boards and back seats to see if there would be a difference because of the weight reduction, but I put both of them back on :P
@@theupscale7130 id say keep the running boards off but yea get ur backseats on and remove the roofrack 👌
Nice. Plenty of room for a lit sound system and led lights inside without seats. Definitely keep running boards and roof rack. Cheap 22s would be dope on it too. Wishful thinking lol
Do you wanna race boss 😊
Lol sure 😂
nevermind I saw it in the comments
I remember seeing it off Amazon, if it helps
If it has cats then it's not straighpiped. Straighpiped literally means just tubes straight out to the tips
Im sorry?
@@theupscale7130 no need to be sorry, it's good information to you. The more you know. I understand you have deleted the mufflers and resonators and that's great, but with cats still on it's not straightpiped.
@@U2Jaime1317 would you prefer if i said it was a catback straight?
@@theupscale7130 your system would be called "muffler delete"
Of all the things you could’ve pointed out to him you chose that? Lol of course...
Looks SMOKING!
Thanks! :D
@@theupscale7130 Mine is an 05. Looks great for 256K I love it. I did those damn power steering lines too. 3 months after I did the power steering cooler. Gotta do the damn Exhaust Manifold. Put it off for 2 plus years now. Hey it gets louder every year. Oh well. Best!
Do you have instgram
Nope :/ i dont have any social media stuff. Just this
@@theupscale7130 Your 1 of the few 30% in America that Dosen't,same here!
My friend, how can I start the car with the control key?
I had an aftermarket remote starter on the vehicle at the time.
Realizing I need to upgrade my envoy because it be looking to original 😢