BENCH VISE - Install Swivel Vise - DIY
Вставка
- Опубліковано 9 лип 2024
- If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
1. Workbench:
amzn.to/3g3UX2m
2. Swivel vise:
amzn.to/3sfLsAv
1. How to add drawers to workbench
• Assemble & add drawers...
2. Adding drawers to workbench
• Assemble & add drawers...
3. Install workbench drawer liner
• How to install workben...
Visit our Amazon Affiliate store, as an Amazon Affiliate, I earn from qualifying purchases.
www.amazon.com/shop/diywithmi... - Навчання та стиль
There is no overhang of the rear jaw when swiveled to the right. He should have gotten closer to the corner. If the frame is in the way underneath, double up a 2x12x12 platform and mount the vise on a platform corner, then mount the platform on the table. You can countersink bolts so the platform lays flat. That's why the platform is doubled. Also, if you use wing nuts you can make the platform easily removeable.
Thanks for watching & sharing. Any & all helpful info is greatly appreciated.
😎👍
Nice video. I have the same bench and vise which is yet to be mounted.
What size bolts did you use?
Could you have placed the base so that one of the holes was in the corner of the bench top without being affected by the metal legs of the bench underneath? I’m trying ti figure out how I’ll mount mine. Also, have you secured the workbench to the wall or floor at all to avoid it moving when using the vise? Thanks!!
If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
1. Workbench:
amzn.to/3g3UX2m
2. Swivel vise:
amzn.to/3sfLsAv
1. How to add drawers to workbench
ua-cam.com/video/bc9lNnXUlsA/v-deo.html
2. Adding drawers to workbench
ua-cam.com/video/bc9lNnXUlsA/v-deo.html
3. Install workbench drawer liner
ua-cam.com/video/mk3OBxbZP9A/v-deo.html
Visit our Amazon Affiliate store, as an Amazon Affiliate, I earn from qualifying purchases.
www.amazon.com/shop/diywithmichaelborders?ref=inf_own_diywithmichaelborders
Helpful video. Thanks!
Awesome, great to hear. Thanks for sharing this. 😎👍
Can you install the vice if you already have the 5 drawer module installed?
Just wanted to update that the Yost ADI-5 has .43” holes. The aforementioned 1/2” bolts WILL NOT FIT. Not sure if they updated the vise, or if the 1/2” bolt suggestion was in error.
Edit: After re-watching, a 5/16” drill was used for the final hole, leading me to believe a 1/2” bolt was never used.
Thanks for watching and sharing. Any and all helpful info, feedback, and advice is greatly appreciated. 👍🧰
_very well narrated_
Good morning, and thank you. Our goal is to get you the info you need without wasting your valuable time. Reach out to us anytime.
Also if you’re into crypto trading, be an early participant in our newly launched DIY community ecosystem.
Toolboxtoken.com
We DIYers need to stick together! 🧰
Good video, thanks. How did you decide whether to put the vise on the Right or left corner?
Thanks for watching & welcome to the DIY Raptor Club. We really wanted it on the left side however the work bench will be going into a room where the left side will be flush with the wall.
This unfortunately would not give us the space to utilize the vise to its full potential.
Keep us posted on your project, thanks again for watching.
Nice video - what size bolts did you use to mount the vise? I just purchased the exact same model.
Awesome, you will love this vise. We used 1/2 bolts that we purchased from our local Ace hardware.
Keep us posted on your DIY install.
How thick is the wood bench top? My vise is around 68 pounds, so I was thinking of bolting down a sheet of maple plywood on top of my metal-topped 56-inch Harbor Freight toop chest & then bolting the vise through both the plywood & chest top. Not sure if 1/2" would suffice or should I use a 3/4" sheet........
Thanks for watching, you are very welcome. This exact bench comes with a 1” thick wood top. Hope this helps.
Welcome to the DIY Raptor Club.
😎👍
Nice studio ❤
Thank you, that’s been a fun place to work. Let us know if you have any questions.
Hey if you’re into crypto trading, we just launched our new platform website. Lots of fun goals ahead.
Toolboxtoken.com
We DIYers need to stick together! 🧰
Because of this channel I was able to assemble my craftsman work bench! Subscribed!! How much does the vise weight?? I'm in the market for one and don't know the limits of bench. The 5 inch vise that I want is 27lbs and the 6 inch model is 38lbs. Do you think the 6 inch is too heavy?
Thanks for watching & welcome to the DIY Raptor Club. Thanks for sharing this & we subscribed to your channel as well.
We don’t recall the exact weight however we love the 5”. A 6” should work great as well.
This is an awesome bench & we have been very happy having it.
Keep us posted on your project, us fellow DIY’ers need to stick together! Hope all is well.
😎👍🔧🔩
Nice😎👍
Hey Alan, thanks for watching. Nice indeed, we love it. 😁
You could always swivel the vice to access the rear hole (instead of extending the jaw).
Thanks for watching & sharing this, any & all helpful info is greatly appreciated.
Welcome to the DIY Raptor Club.
😎👍
💯
Thanks for watching. 😎👍
I have the same vise
Is 5 inch good for most DIY projects? Or, should I get something bigger?
Good morning, we are drinking our morning coffee answering any and all questions for the DIY community.
This 5” has been perfect for all of our projects. Not to small, not to big, thanks for watching.
😎👍
This is way after the fact but I would recommend replacing the bolts with longer ones. You want enough thread protrusion past the end of the nut to ensure the bolts don't back off prematurely.
Thanks for watching & sharing your thoughts. Any & all helpful info is greatly appreciated! 😎👍
I totally agree with using longer bolts. I would also advise using locknuts instead of standard nuts.
I used self tapping screws.
Good morning ☕️ thanks for sharing.
😁👍🧰
What size bolts did you use?
Nathan, what’s up. Thanks for watching and reaching out to us. The bolts are 1/2” and have worked perfectly!
😎👍
I have the same workbench and have been having trouble finding a good vise that’ll fit/mount properly. Would you please send me a link to the same vise you installed in this video? Thanks!
Thanks for watching Matt, absolutely. If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
amzn.to/3Lvxzq5
This vise is AWESOME!!! 😎👍
@@DIYwithMichaelBorders Thanks!
@@DIYwithMichaelBorders I saw in the comments you recommended 1/2” bolts - what about the length of the bolts?
I want this exact set up
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
We appreciate you reaching out to us Eric. We have enjoyed this workbench with drawers and vise setup/combo. Definitely continues to serve a purpose as we work through our projects. 😎👍
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
So is this the FSV-5 or the newer ADI-5 vise?
Ben, thanks for watching & welcome to the DIY Raptor Club. This is a Yost ADI-5.
We love it. If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
amzn.to/3sfLsAv
😎👍
@@DIYwithMichaelBorders It's Ben (not Brian) and yes, unfortunately I've already ordered one but thank you. Might be wise to mention specific model in the video and provide that affiliate link in the description... I would've probably ordered it that way had you done that. Thanks again for the fast response and I look forward to it - hope I have the same positive experience with mine! Also, side note, but you could've also just rotated the vise to access the back bolt, rather than crank it all the way out for access... Keep up the good work! Regards - Ben
@@ben_blair
Thanks for the reply Ben, you will love this vise. Thanks for the advice, any & all helpful info is greatly appreciated. We have been very pleased, hasn’t let us down once.
😎👍
Can you provide me the link for both vise and working table please :)
Absolutely. Good morning, we are drinking our morning, coffee, answering any and all questions for the DIY community.
If interested in purchasing these products, visit our Amazon affiliate links below.
1. Workbench:
amzn.to/3g3UX2m
2. Swivel vise:
amzn.to/3sfLsAv
Hope this helps. 😎👍
You have a work bench in your house? My wife would kill me
Thanks for watching, I’m lucky. It has come in really helpful for our boat engine rebuild videos. 😎👍
+joshuaburton4172- You should beat her to the punch. Never be afraid of your wife. If you let a girl tell you what to do, YOU are a girl. Class dismissed.
ekcetera? I think you'll find it's spelled with a t, not a k.
Thanks for watching Norman. 😎👍