Harbor Freight Vise Installation for Beginners | Quick and Easy
Вставка
- Опубліковано 11 лис 2021
- Today we're going to complete a harbor freight vise installation on my new workbench. I just picked up this vise for just $39 which could make it a harbor freight best kept secret, Installing a vise on a workbench is really easy but there are some important details you should know before you start. Today we're going to go over these details so your installation goes as smoothly as mine. Let's get started.
Subscribe link: https:
/ @backyardmaine
Workbench build:
• Video
Canoe / kayak storage:
• DIY Canoe Kayak Storag...
Canoe / kayak rack for truck (short version)
• Built a DIY Canoe Rack...
Canoe / kayak rack for truck (with material and cut list)
• How to build a DIY Can... - Навчання та стиль
Thanks mane
Thanks. Just the info I needed
Glad it was helpful!
Good job my man. I used case hardened bolts. My bench I put on heavy duty casters, so I wasn't restricted to space. But I'm not knocking you,I admire your work. Sincerely
Sounds awesome. Thanks for sharing
Nice little vice
It's not bad at all. Thanks for watching!
Just invested in the Doyle 5" (the red painted one) for better quality, but same three holes. Thank you.
Very cool. Thanks for sharing.
Harbor Freight is in California too. This land is your land...this land is my land
So two of the anchor points are screwed into the wood and one is pass-thru bolt? I just bought an HF 6” swivel but can’t figure how to get it on the corner since my workbench doesn’t have overhangs. Maybe do one or two but not all three as pass-thru bolts.
I would have lagged all three if I could have. I’m sure you’ll be fine either way.
Great video. The link for your workbench build is private, do you have another video for it?
This one should work.. ua-cam.com/video/JWmshwVz6L0/v-deo.html
What did you use for the sharp edges? What kind of attachment for the Dremel
It was a little grinding wheel
Which video is the overhead bench light? Going through all of this now.
I never ended up posting the video of the power and lights. Sorry. You can see what I did in some of my other videos since I'm using that space as my working studio.
@@BackyardMaine Thanks. Have a 4 ft LED. Everything I've read says to mount it 5.5 to 6 ft above the work surface. Have pegboard galore.
@@34dawgsgo I mounted a 4 ft LED over my bench as well. I mounted it right to the ceiling probably about 5 ft above the bench. It lights up everything well.
This is great!
Thank You!
You mounted the vise too far away from the edge of the workbench. The fixed jaw should be located beyond the edge of the workbench.
This location works perfect for me. I can spin it sideways and work off the side as well. I'll never use it where I need something coming up at an angle from the floor.