I’m super happy with my ball joints. I appreciate the intel on the 2006 drivers side steering knuckle. Turns out I had one of the bad ones from the factory.I was able to find a 2007 at a junk yard for 125.00. Now the knuckle spins freely on the ball joints. Your Instructions were great for the installation. You guys rock!
I put a set of your ball joints on my 02 Dodge last spring, after about a year and 35,000km on gravel road and shitty MB highways, I can say these are fantastic, I'd usually have to replace Moogs after 1 year, my EMFs are still like new
@@EMFEVO I have an 05 dodge 3500 with either bent ears or something it had offset upper ball joints do you offer an adjustable upper joint and can I buy a hole set of your joints
Good video! I am starting the Upgrade Path for my 2005 Ram 3500 Cummins 4WD. What is the recommendation? The ball joints in them are the original ones. Should I change these at the same time I update the steering? Thanks for any feedback!
Is the Dodge front axle different in the ball joint area relative to a Ford or GM Dana 60. I am ignorant in this area, just bought a 96 Ram 2500 (my first 4x4) that will be needing me to replace front end components an wanting to learn about similarities of the Dana 60 in this vehicle to other manufacturers.
Hi there! Awesome product and videos! Could you do a video showing cutaways of lower ball joints so we can see the differences? Also is it possible to rebuild the lower joint in the truck like this? Thank you!!!!
Hard to compare. We're probably the only company that's devoted as much time to learning why dodges steer the way they do and what the problems are exactly. That in relation to how it effects the joints and the motion that occurs inside while the joints are pressed into a housing. So they're pretty much stuck watching what we do and changing their designs to compete.
I’m super happy with my ball joints. I appreciate the intel on the 2006 drivers side steering knuckle. Turns out I had one of the bad ones from the factory.I was able to find a 2007 at a junk yard for 125.00. Now the knuckle spins freely on the ball joints. Your Instructions were great for the installation. You guys rock!
im definatly going to be buying a set for my dana 60 !
That makes sense ! I'll use them next time ! God Bless !!!
So, a king pin in a ball joint.
I can't wait for my order to get here .!
I put a set of your ball joints on my 02 Dodge last spring, after about a year and 35,000km on gravel road and shitty MB highways, I can say these are fantastic, I'd usually have to replace Moogs after 1 year, my EMFs are still like new
Awesome to hear! Thanks for the feedback!
@@EMFEVO I have an 05 dodge 3500 with either bent ears or something it had offset upper ball joints do you offer an adjustable upper joint and can I buy a hole set of your joints
how do you torque the nut with the hub and axle in?
Best in the world!
Hey which ball joint tool kit for the 4th gen rams?
Good video! I am starting the Upgrade Path for my 2005 Ram 3500 Cummins 4WD. What is the recommendation? The ball joints in them are the original ones. Should I change these at the same time I update the steering? Thanks for any feedback!
Is the Dodge front axle different in the ball joint area relative to a Ford or GM Dana 60. I am ignorant in this area, just bought a 96 Ram 2500 (my first 4x4) that will be needing me to replace front end components an wanting to learn about similarities of the Dana 60 in this vehicle to other manufacturers.
I see that on your site and Gino's Garage it is only listed as a 4wd ball joint kit. Will this work for a 2wd configuration?
Hi there! Awesome product and videos! Could you do a video showing cutaways of lower ball joints so we can see the differences? Also is it possible to rebuild the lower joint in the truck like this?
Thank you!!!!
Yes you can rebuild the lower joint in the truck. But the spindle knuckle has t come off. We'll work on an vide of the cut out.
Awesome! Thank you!!!
What about danatrac ball joints deletes
Loving your design, how do you compare to carli, dynatrac and synergy?
Hard to compare. We're probably the only company that's devoted as much time to learning why dodges steer the way they do and what the problems are exactly. That in relation to how it effects the joints and the motion that occurs inside while the joints are pressed into a housing. So they're pretty much stuck watching what we do and changing their designs to compete.
@@EMFEVO Okay understable. When will your joints actually be on the market?
@@KJV0812 which ones? They've been on the market for about 5 years now
Can i buy these individually?
Yes although I think only from us.
Can i buy these individually?
Yes you can buy individual joints
Probably only from us.