How to change a clutch on an Audi A4 2000-2005 1.9 TDI (AVF engine) and other VAG models!
Вставка
- Опубліковано 1 жов 2024
- Unfortunately our boat engine is still complete toast.. We have done a lot of other things lately. We changed out the Clutch, Duo Mass Flywheel, Pressure Plate and Bearing on an Audi A4 from 2000-2005 1.9 TDI. This clutch kit is used in a lot of other VAG models like Audi A4 1.9 TDI 2000-2005 (AVF engine), Audi A6 1.9 TDI 2001-2005 (AVF engine), Volkswagen Passat 1.9 TDI 2000-2005 (AVF engine)
As many of you know we still have a full time job next to Absolute Rebuilds. Next to that we want to keep our videos interesting with these huge builds, so we changed our upload frequency to every Thursday!
Hopefully you would understand and keeping supporting Absolute Rebuilds
Did you already check out our other projects??
- Rebuilding a Mariah Z241 Davanti 1994 350 5.7 Magnum Mercruiser
• Rebuilding a Mariah Z2...
- Fixing a 1963 Buick Skylark Convertible 215cid 3.5L V8!:
• New Project!! Fixing a...
-Rebuild a (FREE) Cheval Liberte horse trailer:
• How to Rebuild a (FREE...
-Did you already check out our videos of the 1977 Chevrolet C20 Longbed SquareBody:
• Rebuilding a 1977 454 ...
-Have you checked our 1981 Chevrolet Corvette Turbo (By Corvette Clinic) video yet?
• Barn Find! Will it sta...
-What about our other build? We are working on a wrecked Jaguar XK 5.0 Portfolio Convertible
• Rebuilding a wrecked J...
-What about our Bimmer 7 series project ?
• New Project!! Fixing a...
-And have you checked out our Rebuilding a Maserati 3200GT with theft damage playlist?
• Rebuilding a Maserati ...
If you want to see more of this build of our other build, make sure to like, subscribe and comment.
Stay tuned for more!
Absolute Rebuilds
* Website: www.absolutere...
* Instagram: / absolutereb. .
* Facebook: / absoluterebu. .
* Twitter: / absoluterebuild
* Email: absoluterebuilds@hotmail.com
* Email: info@absoluterebuilds.com
#Clutchreplacement #VAG #1.9TDI #Audi #Volkswagen #A4 #A6 #Passat #2000-2005 #doityourself #Howto #Avant #AVF #Diesel #Sedan #AudiA4 #AudiA6 #VolkswagenPassat #Station #Stationcar #DIY #Rebuilding #AVFengine #Engine #gearbox #Clutch #Flywheel #Duoflywheel #Duomassflywheel #Clutchkit #Pressureplate #Clutchplate #Manualtransmission #Transmission #6speed #Manual
You can easily get the gearbox down without removing the driveshaft the whole way. Just remove them on gearbox side, thats enough
thanks for the tip, I wish I knew this sooner haha
Is the gearbox heavier than a 1.8t petrol gearbox, mines the 5speed AVB.
@@Jakey959 mine was 5 speed to. T
Hi! My name is Artyom. I'm subscribed on your youtube channel and I really like your videos! I want to ask you about audi a4 b6 1.9 tdi with avf engine. I'm also have this car with avf engine and 6s step gear-box.
1) What's the part code of the clutch kit you bought? How much did it cost?
2) What's the part code of the steering rack you bought?
How much did it cost?
Thanks!
Hey, nice video. Just to tell you, that u have to tighten the suspension parts when the car is on the ground.
the control arms :)
Thank you so much for this video, in my one AVF clutch is slipping and I need to change it.
Man I wish we got the diesel b6 a4 in the states :(
Hey Absolute, when you removed the stock flywheel, were there spacers installed? Building a 96 A4 Quattro now and don't see anything mentioning these spacers
The camshaft it’s worn out. You can tell by the beating sound of the engine
Lol wtf
Hola, quiero cambiarle al mío el embrague, que marca lleva el embrague original que viene con Audi? Vi que desmontas los palier en rueda, es necesario? O con desatornillarlos de la caja de cambio es suficiente? Muy buen video
How did you reach the 3 bolts on top of the transmission? And what tool did you use to loosen them?
A really long socket rench then take it from the top thru the motor
Czy jest jakaś regulacja zmiany biegów bo po zmienieniu dwu masy nie mam wstecznego czy coś źle skręcone ?
Just do it I did it an it worked so if I can do it anyone can
What kind of scissor bridge do you use?
is this a box 5? if so which clutch do I need?
You crazy, why are you dismantling the exhaust pipe and half axle, why are you removing air tube wtf mane you crazy
6:25 Completely gone? i did seweral dualmass flywheel replaces, and even NEW flywheel came with this amout of play...
Muy buen video. Una consulta tengo que hacer el mismo trabajo en un Skoda superb que tiene el mismo motor, es necesario quitar la transmisiones del lado de la rueda(homocinetica) Un saludo cordial desde Badajoz España
Great video. Perfectly made. Many thanks!
muy , muy, bien👍
Nice one mate...
😉🤘💪
hi man, was it your customer's car? Doing a test drive with such oily hands, I hope you didn't charge any labor costs.. but paid to him, to cover some deep cleaning instead..
you had a lot of work :), best regards from Poland
Great video, nice and simple to follow 😃
Whats the component where the flywheel get screwed on called?
Great vid mate , couple of questions;
worth replacing the rear seal on the gearbox while everything is out ?
How many hours did you spend doing the clutch / DMF swap ?
Most likely it takes 4-6 hours if u know what ur doing, if u got no clue maybe 12hours but lable every goddamn screw so u know where they going or record u taking it apart then watch in reverse🤣
hello
there was no need to bleed the clutch?
Hi how many hours does it take to replace the clutch thanks
about 5 hours, thats what i managed to do in my garage with jackstands, also 3rd time i've changed it on this type of car
@@MidtGamingDK thank you
Can you remove the gearbox without removing the drive shaft thanks
@@MidtGamingDKcan you remove the gearbox without removing the driveshaft thanks
does this also apply to the 1.8T? i have a 04 avant with the 01X 6mt
its just a little longer and heavier than 6 spd gearbox, you dont need to remove the driveshafts, just undo the 6 bolts and slide them aside. if you want to take them out to make your life easier, you dont need to undo the knuckle, just turn the steering wheel
whats the bit used at 3:12 please somebody? looks like an extended star drive
XZN or triple square
How long did this take you mate
Good job ! SUB :)
thanks, really appreciate it!
🙂🙂🙂🙂🙂👍👍👍👍👍👍
Es necesario quitar transmisiones?
how many cost ?
Approximately how long does it take to do the whole process ?
4-6 hours if well experienced.
2 days if you have never done it and don't have a lift or the right tools. You can get it done but you will run into problems along the way that need solving. You won't have all the tools you need and need to get creative.
Great video keep it up! What's happening with the boat?
Thank you for all your support! Just want to let you know we really appreciate it! We are currently rebuilding both heads!
What's the torques for tightening the flywheel?
60 nm or 90 degrees.
Nice video
Thank you!
👋
Where can I find the clutch alignment tool? Great video
nice music, nice work