How to set up a 1996TS | OpenBVE Jubilee Line demo
Вставка
- Опубліковано 31 гру 2017
- This video shows how to set up the 1996 tube stock for the Jubilee Line demo, I've tried to go into enough detail as I could but I highly recommend going through the manual for other features with the train which I may not have covered.
Download it here!: bvewesternregion.co.uk/
Download OpenBve (Latest version): openbve-project.net/
I hope this video has helped and if you have any questions or need further help, then feel free to drop them in the comments or on the forum bveworldwide.unlimitedboard.co...
Full run of the route: • OpenBVE Jubilee Line P... - Розваги
took me like 30 mins to depart the first time I played, didn't help that it was my first ever openbve game. eventually figured out the controls
Hope you enjoyed it! It is a rather complex thing to learn at first but it becomes easier eventually. it captures what was the early 2000s era where drivers actually drove by sight to signals. I hear in the grape vine the next phase (phase 3) is soon to be released. I don't know how soon but I eagerly await the day.
Should you stumble across any problems, feel free to comment the issue anytime and I'll do my best to help!
Hmm there was speculation of a BR Route. In fact BVEWR posted a snip of the North London Line from between Kew Gardens and Gunnersbury, the era being Silverlink Metro when it was operating class 313s around 2006. I think, and will include the full route from Richmond to North Woolwich there's no known release date yet however I'm thinking the developer might look to complete the Jubilee Line first and then maybe continue work on other open projects. But I agree I wasn't neither expecting such a highly realistic train to this level of detail. Now I feel like I can finally drive like the pros :)
EDIT: For future readers, the full route to North Woolwich is released and available to download and play on their website
Agreed
dude tysm
You can do Richmond to Stratford then Stratford to West Hampstead
@@milkandduckrailway323 It depends on whether or not I have the time to do it, recently my video capture has been giving issues of late
Thanks!
Hi, How do I use the Deadman pedal? Because the train is constantly giving an error message. The fault indication is called Deadman Alarm Sent. Thank you in advance for your help.
That alarm would be the vigilance alarm. When no input is made after 60 seconds, this alarm will sound. When this happens, cancel the alarm by pressing space or move the TBC using keys Q, A or Z on your keyboard. Then press 0 to clear the Deadmans alarm message on the TMS. My other video covers this
I wonder what Bve Western Region will come up with next, apparently there may be another LU Route, or it will be a BR Route (Possibly with NSE?)
I am looking foward to seeing this as I was not expecting this at all.
Here's the video I found: vimeo.com/144397681 It goes as far as after the points by Gunnersbury.
Hey man again sorry to be a pain but how do you use the camera controls I have 0 idea I just got my pc yesterday 😂
On the keyboard with default arrow keys moves the viewpoint on spot. The NUM pad key arrows respectively move the camera left and right on X axis and up and down on Y axis. And NUM keys 7 and 9 moves the camera forward and back on the Z axis. You can change views using the first 4 F keys at the top. F1 - Driver view, F2 - follow train, F3 view from fixed point and F4 is spectator view (or enthusiast view when it is on a fixed point but locked to a certain car of the train as it goes past)
Hope the above helps
Bvetube101 thanks a bunch now I can go in the train itself and go around the stations thanks!
I dont have the PGup button or the PGdown , as im in a french keyboard , could you help me.
Openbve is customizable with setting the keys to your preference if you don't have the preset for your keyboard.
So if you open OpenBVE so that the main menu pops up -> Click on Pers. Des commandes -> in the list look for "SECURITY_C1 & C2" -> select C1 first, this is defaulted to keybind "Page précédente" key (or Page Up) on the keyboard next to Début and "Fin". To change this to another key of your choice in the "Commande actuellement sélectionnée, Confirm the Commande you wish to change and ensure its selected. In this case its" SECURITY_C1". Ensure Clavier is selected unless you have a joystick as well. Then from this point you can either click on the box to the right which say "Click here to enable Keyboard..." so that it lights up in pink. This activates edit mode. -> Press your desired key on the keyboard you wish to use. (It must be a key that is not already used). Once selected to the left in the Touche box you will see the key you have selected. Press on the drop down box or any box (without selecting anything that is already set in there) to come out of edit mode and et voilá. Repeat the same as above for SECURITY_C2.
If you have any trouble then feel free to reply to this comment :)
@@Bvetube101 Thanks!
I did what you said it wont move
the tripcock keeps going off and im pressing 0
Hello there, this video is quite an old one, there were some changes made to the configuration of the train in the latest release. By the way did you mean the deadman's CAT A alarm? I cover that in this video ua-cam.com/video/CPdJ6drUwpQ/v-deo.html skip to 11 minutes in under Extras. A brief explanation here for you: When the alarm sounds, (visual cues being the Alarm Acknowledge button on the radio panel to the left is flashing and the TMS screen should display a message reading "CAT A Deadman's Alarm Imminent... Acknowledge!") given the train is correctly set into Full Speed Manual mode, press Space on your keyboard twice or press Q, A or Z to cancel the aural alarm then press 0 to clear the TMS message on the screen. Let me know if this works for you :)
Hi could you tell me what key to use to acknowledge the alrarm
Thanks!
If the CAT-A alarm sounds, move the TBC with Q, Z or Spacebar to twist (Must be in notch B3) then press 0 to clear the message on the TMS
Bvetube101 The alarm has stopped sounding but unfortunately the TMS is still displaying the warning message
@@maxwelsh4126 Make sure to press key "0" to clear the message
The ‘call on light’ is flashing and I dunno how to change it
Hi if your call on light is flashing check the train mode is set in full speed Manual mode. Call on light flashes when the mode is set to Reverse, Inter or Forward/Restricted Manual
But how to you go I have phase 2 but that top yellow button next yo the red flashes?
If that happens and the CAT A alarm sounds you have likely passed a signal at red (danger) To reset simply Shutdown your train, not removing the key, then press INSERT (You'll hear a relay click). Now turn back on the train, but move the mode selector to the RM setting, if you try moving it to the PM/FSM mode you'll get an Alarm. Note the tripcock delay light is illuminated and will say illuminated for If I remember rightly about 3 or 4 minutes. In RM you're speed restricted or you can sit and wait for the tripcock delay light to go out.
Once the tripcock delay light has extinguished, stop the train (if its moving under RM, switch the mode selector back to PM/FSM and continue normal driving.
I will also do a video demonstrating this for you soon 👍
@@Bvetube101 THX
@@everydaywrld7306 Glad I could help 👍
Hi! How do i download other routes like the northern line?
A good few sites host them. Best to Google anything since you might likely find what you're looking for through a general search (Not always the case though) here is a link to a site that has the Northern Line bve files on there. Credits to original authors
openbve-depot.weebly.com/northern-line.html
@@Bvetube101 Really appreciate it! Thank you! 👍
can be ride on the other bve routes, northern and victoria line ?
even though I followed the instructions for starting this train, i did not manage to move it. Was it supposed to be so complicated?
This train has been fitted with a plugin that only allows it to work on the route that comes with it due to the advanced features you see featured, including the TMS functionality, driving modes etc. You could remove the plugin from within the ATS file in the train folder to run it on other routes, however this will result in a train which doesn't work properly and not something I would recommend
@@Bvetube101 yes, you are right, for example, i can not turn on the front light and the light in the driver's cabin. The motor sound is not heard when the handle is set to "n". I do not know how it is on the original route because I could not move the train. I noticed that the sound of the track is not heard ..
@@Bvetube101 so, this train looks great, unlike the previous versions for bve. I mean the interior.
@@jovankovacevic457 I do agree, and based on things not seen and heard when this train is played on other routes may be also due to the way the train was designed. Track sounds may play differently based on the track type running sound numbers that are set in the route file and these vary from route to route regardless of the train that is being run on it.
@@Bvetube101 thanks mate for answers ;)
another short question is if it's not a problem. Do you know when it will be finished victoria line (northbound, version 5)?
For some reason my doors wont close and TMS wont work
I can't seem to understand what you said at 6:20 . What are you meant to press?
Press the Page Down or Page Up key to move the mode control switch (MCS) between the different train modes I think is what I was meant to have said there. Let me know if it helps
@@Bvetube101 Thanks for replying quickly! Pressing page up and page down just moves the camera, and the same thing goes for using the numpad, whether that be numlock on or off.
@@TheBromleyBusGuy Maybe check your key assignments in the options in the main OpenBVE menu. I'm using the default keys. I think I explained it somewhere before to someone here that had a different keyboard layout on how to custom assign keys
@@Bvetube101 I managed to work it out. You have to hold down "fn" on the keyboard and then press page up or down, like with f keys. The only trouble I now have is stopping at the correct point now. It's hard to get it spot on
@@TheBromleyBusGuy Glad I could help! Do refer to my follow up video on how to use techniques to stop correctly
Whhen i look at the screen it says this
BVE INTERNAL ERROR TRAIN PLUGIN FAILEDTO LOAD CAR 1 Please reset OpenBVE for troubleshooting see the user guide
00
How do i fix that
Also When i loadthe game on the top left corner is says 12 file(s) Not found
20 error(s), 56 warnings
For your first issue, check on the website that you are running the required version to operate this sim. As I understand the latest version of OpenBVE may throw up errors when trying to run the sim.
This is because of the port to 64-bit whereas the jubilee line sim was built in 32-bit.
To answer your second question those errors and files not found are a normal thing, it shouldn't affect gameplay. It's more for the developer incase such pathing for files that are called in the route file are not there maybe because it was taken out but not removed. (anyway like I mentioned no need to be concerned with it)
More info on this link, hopefully it will shed some light on the subject
bvewesternregion.co.uk/important-information-about-our-jubilee-line-and-other-routes/
@@Bvetube101 Can you send me the link to the open bve you play on because im not 100% sure if i got the correct one or not since theres different versions of open bve
hi it shows an error where i need to take out the B3? how do i do that i can't drive now
Check the instruction at the top. Ensure TBC is in B3 position the press spacebar to twist handle in order take it out of the "Stow" position then press till it indicates P1 or more as desired (bottom left of the screen in game)
Whenever the TBC handle is stowed such as when stopped at a station and you move the handle with Q and Z, the message just displays as a reminder to you.
Hope that helps!
@@Bvetube101 I pressed F to realease it but it wont work, which button in default puts it out of stow?
@@hartstukken BAKEMONO ensure brakes are in B3 then press Spacebar to twist handle (Ensuring the doors are closed) The reverser F and V keys do not work since the plugin on this works differently by Mode Selection. So press Pg Dn and ensure the mode control selector is at FSM (Full Speed Manual) and the steps above should have it working for you
@@Bvetube101 I've done all this and started driving but the TBC twisted right back at me?! mid drive?! I've been reading the manual but how do i go into B3??? i pressed F as instructed but it won't work.
so i checked it out i got it working! now on to stopping practice
Help i have this random alarm when i depart when im on 10 mph and keeps alarming
Ah I believe you might be in Restricted Manual mode (RM). And you can tell this by looking at the mode selector position and also the flashing call on light.
In RM mode the train is restricted to 14kph, after which if the train exceeds this speed then the traction motors will cut out and you will hear that audible alarm.
So before starting your journey, double check that you have selected Full Speed Manual/Protected Manual (FSM/PM) using the page Up and Page Down keys on the keyboard, which will hopefully fix your issue.
@@Bvetube101 ty
@@Bvetube101 yo do you have the victoria line route i cant find it i have the train all i need is the route please
tag me once replied :))
@@Roke001 web.archive.org/web/20190107012147/bvelondon.co.uk/victoria-line/
Hi, good tutorial. I press F10 to disable huds, it comes up with information and back at score and not showing me that I've disable huds. Do you know how you disable huds.
Also how do you get the passenger interior on the train carriage.
Press F10 twice, should do the trick! F2 follow the train in exterior mode then press the Numpad keys to move about
I have the deadman alarm
Take a look at my latest video here: ua-cam.com/video/CPdJ6drUwpQ/v-deo.html and skip to 11 minutes in, I cover that there :)
And a call light on
how do you close the cab door
"Insert" and "Home" keys
thank you
Mine say error please reset openbve when wanting to change destination troubleshoot report
Hi there,
What version of OpenBVE are you running?
Mine say bve internal error train plugin failed to load car 1 please reset openbve for troubleshooting see user guide
@@patricklukika8115 it's likely the plugin failed to load. What version of OpenBVE are you running? Just so I know if it's an error based on the current version of the sim you have
I have the same problem and delete wont work
Some alerm blocks me
How do you put alerm off
This video was prior to the update on the 1996TS which released with Phase 2. To acknowledge the OPO alarm , either press Spacebar to twist the TBC and then press "0" or you can do the same thing with the Q or Z buttons which manipulates movement of the TBC which you'd then press "0" to cancel the alarm. Hope this helps. Do refer to the manual as it fully explains how it works :)
@@Bvetube101 it does thanks
@@everydaywrld7306 Glad I could help 👍
@@Bvetube101 but one more question is it on hmmsim because phase 1 is but how about 2
@@everydaywrld7306 The Hmmsim version is not affiliated with the developer who produced the route which is intended to run on the latest version of Openbve. There was just a couple of individuals who decided to convert the original route and train to run on Hmmsim without prior permission which led to some issues I understand in which they didn't make Phase 2 for it. In my opinion running a fully immersive route on a simulator not made for a route such as this kills the very essence of actually driving a train as if you were in real life. Not saying you can't but a lot of things don't work on Hmmsim if you're trying to replicate the same thing I find due to the nature of the sim.
why does my train go backwards when im on f not b
Check the mode selector is set to FSM/PM, I did not point out that the mode selector overrides the Reverser in openbve. Coming soon if I get time
alright thanks
Nice reference to aviation shit there, Shaq
Cheers! Hope you enjoyed Adam :)
@@Bvetube101 certainly did. Just now completed the Stratford to West Hampstead* route in OpenBVE. I was very late because I didn't get the speeds all that right but I did a route.
@@simpilotadamt1012 It would be to West Hampstead which is the current phase 3 release. Yeah stopping times are tight I would agree :)
@@Bvetube101 lmao I don't even know the station I stopped at
wat
It says
ATP / ATO system error:
No code found
Hi there, let me guess... You wanted to let the train run in ATO. As explain in my video this is all pre TBTC era when driving by sight of conventional signalling was a thing. So given the above the train does not have any ATO implemented hence it won't work
@@Bvetube101 wat
also everytime i try to move my train the deadman alarm goes off...
@@Bvetube101 ahhhhh my ears im playing the game rn
@@thepersonone134 check the mode is selected on FSM/PM (Full Speed Manual/PM)
Do you know how to change the key for the key insert?
Yes you can do this in the main OpenBVE program, if you click on "Customise Controls" the in the assignments list look for "SECURITY_A1" (Insert). Highlight this, then in the drop down box below you can change it to any key you desire. You can also click on the box on the right so it highlights magenta and press the key you want to assign and it will do it for you.
Hope the above helps! :)
@@Bvetube101 Thank you! It works.
@@human962 Great to hear!
If you have a problem with the Alarm. Press 0
Correct! , this is highlighted in my other video.
Thanks for watching
The train does not want to move...
I've almost finished a video on Driving Tips which will help you with general operation of the train, I plan to have it out Tuesday at the latest but if you want a brief instruction,
1.Set up the train ensuring the Reverser is set to (F) Forward by pressing, 'F' key and the combined handle set to BrakeNotch "B3"
2. Await the signal then Close the doors
3. With the train configured ensuring you are in F - B3 (Step 1), Press space bar, (you'll hear the tbc handle twist) then press Z key to release the brakes and set power. The train should now be moving.
If the train doesn't move ensure on the Master control switch panel that the mode selector is set to FSM/PM. Having it on Reverse, or Forward would move the train in the forward or reverse direction respectively at a restrictive speed and the "calling on" indicator light on the panel above the opo cctv screens will flash steadily. It will also flash if the train is in the "Inter" mode. This mode is generally used for brake testing as the train brake will release but the traction motors are disable and therefore no power will be drawn.
I hope this will help, do look out for the video in the next few days however :)
@@Bvetube101 Thanks, This definitely helped me a lot.
I'm glad it has for you 👍
@@Bvetube101 I have one other question, If I were to use this train on a different route is it supposed to work? I tried it with one of my test routes so I can just go for speed but The doors are not closing, preventing me to drive
@@richiegarcia2819 This train was designed to run on the route it was made for. The features in the plugin which include, Correct Side Door Enable, the TMS and a few other things, specific code is used in the route to allow for it to work. It is not standalone, I believe the developer mentions this somewhere. The only way to get the train itself working on any route would be to implement the code that the plugin requires to make the train operative on that route. Without it (as you've seen and tested) it simply won't work. Hope I helped to answer your question :)