Hello bve tube u know when I use the central line for some reason every time I load it the screen is white but the central line is there do u know how to fix. It
Hey @Elite_Ehsan As far as I know there isn't currently any Jubilee Line routes that feature ATO. This route here is pre 2000s era where you had conventional signalling as you can see here, so before the present day where there is ATO on the Jubilee Line
hey man you helped me well earlier i can;t get enough of this, but stopping at the green mark is hard. so which speed do i use actual or target speed???
Glad you're enjoying it, in the video I think second section in, I demonstrate coming into the station at no more than 30 and begin braking, feathering the brakes to vary the speed which has me slow enough so that if needed I can apply more brake to stop correctly at the stop point. The margin of the stop area is quite tight so ensure you maintain brake to crawl speed. There is a slight delay for the brakes to kick in however when you apply it so judge the correct timing in which to do so. Also if you stop short, apply one notch of power but almost immediately apply brake to move a few inches as I found if you watch my phase 1 video, Stratford to North Greenwich, at North Greenwich I stopped almost correctly but didn't want to overshoot so I did what I described above.
Hiya, see if you can look for and run version 1.7.0.3. See here vps.bvecornwall.co.uk/OpenBVE/Stable/. Ensure you have placed the folders in the correct location. Let's use the Jubilee Line for example, make sure that your Jubilee Objects folder is in [Openbve/Railway /Objects/Jubilee Line] and not [Openbve/Railway/Objects/Objects/Jubilee line]. This results in the sim returning a blank when it's running as it cannot locate the path of the objects in the route file when called.
Hello, I know this video is over a year old but I recently downloaded the jubilee line and for some reason I can't get the doors to close, I press F5 and it works for opening but it doesn't do the same for closing so is there any solution?
Hey for troubleshooting first check the key assignments in the openbve options in the home menu are set as default. Also make sure that the DOOR_CLOSE left (F5) is not multi set than more that one key. Next check when you start the route that the plugin has correctly loaded using the version of openbve that is recommended by Bve Western region. Let me know if this has worked for you. Cheers 👍🏻
@Bvetube101 Sorry but one question can u make a video on Waterloo and city line and also when im driving Waterloo and city line An alarm constantly reappears what do I do?
I can... Should be after this next video on the Jubilee line phase 3 I have upcoming. The alarm that reappears, can only be one of two things I'm thinking of. One is the deadman's alarm that only goes off if stationary and no input to the traction brake controller was made within 60 seconds, or if you've either passed a signal at red. Last I can think about is you may be driving in RM mode which restricts your speed to 13kph and greater than 16kph an alarm would sound. Generally if starting from the siding road into Waterloo you start the move in RM then when berthed at the platform, press PG Dn to put the mode into CM/FSM (Coded Manual/Full Speed Manual)
farhana rahman you need to wait for both signals to turn white in the depot. Use CM (Coded Manual) for the departure from everywhere EXCEPT Waterloo ARRIVAL platform. You will need to use restricted manual for that. Be alert and pay attention to the speed in the tunnel as they change quite often. Also, don’t forget to press the spacebar to twist the TBC and then go to the P3 detent to get the train moving
Hello there, I'll add it to my list of things to get to. With the central line although a 4th brake has been added, only the ATO can use this brake and will have no effect if being used when driving in coded manual (CM) I'd recommend maybe 55kph but use correct judgement, if you feel its too quick approach the platform slower and feather the brakes to suit so you have enough room to stop at the stop point. I will do a driving guide video for you soon
Hi certi, press CTRL and V on the keyboard will show the speed. First press will show speed in KPH, second press will show speed in MPH and third press will clear the speed display back to original Hope this will help!
Hi there, since this video the route has updated and I hope to put out another video soon Did you follow everything properly, so on closing the doors, the Reverser key doesn't work since the train movement through setting the Mode on the Mode Control Selector. Ensure it's set to FSM/PM (5 ish o'clock position), secondly make sure the combined power/brake handle is in "B3" then press SPACEBAR, you'll hear the combined handle twist and finally press Z until its at P3 or whatever power notch is desired. I hope this will help :)
I believe according to the manual Home and End keys on keyboard Close/open the Near and offside driver doors. Which Alarm can't you silence? I would gather two guesses, one the Dead man's Alarm CAT A if no input was made to the combined Driving handle for a while. (I explain at the end of this video on how to cancel that alarm). OR the Mode Control Selector switch is set to ATO, which you'd get both CAT A and B alarms and a TMS message (No Code) because there is no systems installed that use this mode. If this is the case then press the Pg Up button to take you back one Mode to FSM and clear the message by pressing 0
@@farhanarahman2634 From what I know and in real life too, drivers can have the doors open while the train is in motion so long as they are in FSM/PM. No alarm should sound, just check it may likely be the mode selector or the dead man's alarm. The TMS will indicate each. If its the dead man's alarm either pressing Q, A, Z or spacebar if the notch is set in B3 should cancel the alarm then press 0 to clear the TMS message
Which side are your keys assigned to? Ensure if using a main keyboard the numbers are the ones at the top below the F keys, not the Num pad to the right. Also check openbve key assignments to ensure they're correct
Oh my god, please help, I’m so so confused. Whenever I try and move, I just can’t! It’s so annoying, and this train sim is just too complicated for me. Please help me how I can actually move because I can’t :(
Hi there, firstly are you running the latest version of OpenBVE, The sim requires v1.5 or later. Secondly have you correctly set up the train? If not do take a look at my other video in the description, I go into more detail in how to set up the train to get it moving. This video does not include the full setup procedure. Rather when the train is set up ready to depart which is the first scenario demonstrated at the beginning. Let me know if you are still struggling with that and I'll do my best to help!
Bvetube101 hi, thank you for the quick response!! I’ve looked at your other video already and I’ve done the set up bit, and clicked space, then tried to go forward and I just hear a clicking noise but I don’t move at all
Bvetube101 basically after i press delete there is this light that flashes and wont stop and will sometimes cause a alarm and my doors refuse to close if u can give me a more detailed way to get the train working that will be much appreciated
@@Itreallywasnt is this based on starting up the train as you start the simulation? If so then in my first video linked in the description, I explain that pressing the Delete Key 🗝 inserts the key into the panel. This then activates the function to select the driving mode by pressing page up or page down key to turn the mode control selector switch clockwise or anti clockwise. If you press the Pg down key on your keyboard until the Mode control selector points at "Full speed Manual" this should be the one you want. In your case if you're getting an Alarm, you've likely selected the ATO mode which isn't functional at all as this is before TBTC was ever implemented years later and you'll get an ATO/ATP Error No code message on the TMS screen. In such case just press page up. The doors should close when you press F5 or F6 respective of which side the doors are open. Let me know if you are still having problems
@@Itreallywasnt I might reckon it could be either a plugin issue or the version of OpenBVE you're running it on. What version of OpenBVE are you using?
![Jubilee Line ⚪️ Willesden Green to Green Park [LU Roblox]](http://i.ytimg.com/vi/DYNe9pXo4bc/mqdefault.jpg)
hey man ..im new in openbve keep on the good content is really helping me
Thanks! I appreciate it 👍🏻
This really helped me!
Hey Joe! I'm glad it has, hope you enjoyed the video!
Yes I enjoyed!
ahh one thing i got the train and route but in openbve i press desktop and it dont come up
@@victorialine222 How do you mean? As in the simulator window won't show or?
@@Bvetube101 oh my dad helped me i cant wait to paly bc im new with windows and i dont know how to work it properly
Hello bve tube u know when I use the central line for some reason every time I load it the screen is white but the central line is there do u know how to fix. It
I'm not sure I understand, could you try to elaborate more? Did you check the locations of the folders are correct?
Bvetube101 basically I don't think the map loaded but the train did so the map is like white and also I can drive the central line
@@farhanarahman2634 Are you running the latest version of openbve?
Actually I don't think so
Omg I couldn’t drive but NOW I CAN
hey bve tube 101 is 1 question is there ATO for the jubilee line
Hey @Elite_Ehsan As far as I know there isn't currently any Jubilee Line routes that feature ATO. This route here is pre 2000s era where you had conventional signalling as you can see here, so before the present day where there is ATO on the Jubilee Line
Bvetube101 ok
hey man you helped me well earlier i can;t get enough of this, but stopping at the green mark is hard. so which speed do i use actual or target speed???
Glad you're enjoying it, in the video I think second section in, I demonstrate coming into the station at no more than 30 and begin braking, feathering the brakes to vary the speed which has me slow enough so that if needed I can apply more brake to stop correctly at the stop point. The margin of the stop area is quite tight so ensure you maintain brake to crawl speed. There is a slight delay for the brakes to kick in however when you apply it so judge the correct timing in which to do so. Also if you stop short, apply one notch of power but almost immediately apply brake to move a few inches as I found if you watch my phase 1 video, Stratford to North Greenwich, at North Greenwich I stopped almost correctly but didn't want to overshoot so I did what I described above.
hey bve tube i am running the latest version but the central line still goes white
and btw im on my laptop from my ipad has my moms account the farhana rahman one
Hiya, see if you can look for and run version 1.7.0.3. See here vps.bvecornwall.co.uk/OpenBVE/Stable/.
Ensure you have placed the folders in the correct location. Let's use the Jubilee Line for example, make sure that your Jubilee Objects folder is in [Openbve/Railway /Objects/Jubilee Line] and not [Openbve/Railway/Objects/Objects/Jubilee line]. This results in the sim returning a blank when it's running as it cannot locate the path of the objects in the route file when called.
What u mean
@@eliteehsan1887 Is all the folders placed correctly?
Hello, I know this video is over a year old but I recently downloaded the jubilee line and for some reason I can't get the doors to close, I press F5 and it works for opening but it doesn't do the same for closing so is there any solution?
Hey for troubleshooting first check the key assignments in the openbve options in the home menu are set as default. Also make sure that the DOOR_CLOSE left (F5) is not multi set than more that one key.
Next check when you start the route that the plugin has correctly loaded using the version of openbve that is recommended by Bve Western region.
Let me know if this has worked for you.
Cheers 👍🏻
@Bvetube101 Sorry but one question can u make a video on Waterloo and city line and also when im driving Waterloo and city line An alarm constantly reappears what do I do?
I meant constantly reapeats
I can... Should be after this next video on the Jubilee line phase 3 I have upcoming. The alarm that reappears, can only be one of two things I'm thinking of. One is the deadman's alarm that only goes off if stationary and no input to the traction brake controller was made within 60 seconds, or if you've either passed a signal at red. Last I can think about is you may be driving in RM mode which restricts your speed to 13kph and greater than 16kph an alarm would sound. Generally if starting from the siding road into Waterloo you start the move in RM then when berthed at the platform, press PG Dn to put the mode into CM/FSM (Coded Manual/Full Speed Manual)
farhana rahman you need to wait for both signals to turn white in the depot. Use CM (Coded Manual) for the departure from everywhere EXCEPT Waterloo ARRIVAL platform. You will need to use restricted manual for that. Be alert and pay attention to the speed in the tunnel as they change quite often. Also, don’t forget to press the spacebar to twist the TBC and then go to the P3 detent to get the train moving
Tips for central line plz? I have a -4th braking detent. How should I distribute my braking now?
Hello there,
I'll add it to my list of things to get to. With the central line although a 4th brake has been added, only the ATO can use this brake and will have no effect if being used when driving in coded manual (CM) I'd recommend maybe 55kph but use correct judgement, if you feel its too quick approach the platform slower and feather the brakes to suit so you have enough room to stop at the stop point. I will do a driving guide video for you soon
Bvetube101 thanks mate. Appreciate it
How do u show the speed u are going on the GUI on bottom left
Hi certi, press CTRL and V on the keyboard will show the speed. First press will show speed in KPH, second press will show speed in MPH and third press will clear the speed display back to original
Hope this will help!
@@Bvetube101 thank you
Could i know how to open and close local doors?
The default keys is usually F5 and F6 (very top of the keyboard)
End and home
The first bit didn't work for me I pressed Z lots of times quickly
Hi there, since this video the route has updated and I hope to put out another video soon
Did you follow everything properly, so on closing the doors, the Reverser key doesn't work since the train movement through setting the Mode on the Mode Control Selector. Ensure it's set to FSM/PM (5 ish o'clock position), secondly make sure the combined power/brake handle is in "B3" then press SPACEBAR, you'll hear the combined handle twist and finally press Z until its at P3 or whatever power notch is desired.
I hope this will help :)
Bve tube how do you turn on the speed bar on central line
Speedbar turns on with the train. Does it not light up when you turn the mode selector? (Pg Dn?)
When I do nothing happens but I can hear the thing turn
@@farhanarahman2634 Check the plugin has loaded correctly or the train is download with no missing items?
Don't worry I know now thanks
@@farhanarahman2634 All good! Glad you could resolve your problem 😄
Plz help me how do u close the drivers door and stop the alarm
I believe according to the manual Home and End keys on keyboard Close/open the Near and offside driver doors.
Which Alarm can't you silence? I would gather two guesses, one the Dead man's Alarm CAT A if no input was made to the combined Driving handle for a while. (I explain at the end of this video on how to cancel that alarm). OR the Mode Control Selector switch is set to ATO, which you'd get both CAT A and B alarms and a TMS message (No Code) because there is no systems installed that use this mode. If this is the case then press the Pg Up button to take you back one Mode to FSM and clear the message by pressing 0
Thank u
And why does it keep constantly ringing. The alarm it's so. Annoying is it because of the driver door is open
@@farhanarahman2634 From what I know and in real life too, drivers can have the doors open while the train is in motion so long as they are in FSM/PM. No alarm should sound, just check it may likely be the mode selector or the dead man's alarm. The TMS will indicate each. If its the dead man's alarm either pressing Q, A, Z or spacebar if the notch is set in B3 should cancel the alarm then press 0 to clear the TMS message
Now it just says clear on light how to I get rid of that and like go down on the panel
when i press 9 it just zooms in and press 0 it zoom s out
it wont let me sign on
Which side are your keys assigned to? Ensure if using a main keyboard the numbers are the ones at the top below the F keys, not the Num pad to the right.
Also check openbve key assignments to ensure they're correct
@@Bvetube101 got it working thank you
Oh my god, please help, I’m so so confused. Whenever I try and move, I just can’t! It’s so annoying, and this train sim is just too complicated for me.
Please help me how I can actually move because I can’t :(
also when I release the handle I hear a noise but still can’t move?!
Hi there, firstly are you running the latest version of OpenBVE, The sim requires v1.5 or later. Secondly have you correctly set up the train? If not do take a look at my other video in the description, I go into more detail in how to set up the train to get it moving. This video does not include the full setup procedure. Rather when the train is set up ready to depart which is the first scenario demonstrated at the beginning. Let me know if you are still struggling with that and I'll do my best to help!
Bvetube101 hi, thank you for the quick response!! I’ve looked at your other video already and I’ve done the set up bit, and clicked space, then tried to go forward and I just hear a clicking noise but I don’t move at all
@@sxfthvfflepuff13 Ensure you've set it to B3 then press Space you'll hear the twist and then press Z
Bvetube101 ok ill try again
its doesn't work for me
Hello there, clarify what doesn't seem to work for you? I'll do my best to help!
Bvetube101 basically after i press delete there is this light that flashes and wont stop and will sometimes cause a alarm and my doors refuse to close if u can give me a more detailed way to get the train working that will be much appreciated
@@Itreallywasnt is this based on starting up the train as you start the simulation? If so then in my first video linked in the description, I explain that pressing the Delete Key 🗝 inserts the key into the panel. This then activates the function to select the driving mode by pressing page up or page down key to turn the mode control selector switch clockwise or anti clockwise. If you press the Pg down key on your keyboard until the Mode control selector points at "Full speed Manual" this should be the one you want. In your case if you're getting an Alarm, you've likely selected the ATO mode which isn't functional at all as this is before TBTC was ever implemented years later and you'll get an ATO/ATP Error No code message on the TMS screen. In such case just press page up. The doors should close when you press F5 or F6 respective of which side the doors are open. Let me know if you are still having problems
Bvetube101 i still get an alarm when i out it into full speed manual
@@Itreallywasnt I might reckon it could be either a plugin issue or the version of OpenBVE you're running it on. What version of OpenBVE are you using?
Too thin!
Hi, how do you mean?