Peugeot 206 Gear Knob and Gaiter Removal and Refitting
Вставка
- Опубліковано 7 лют 2025
- Replacing the gear stick knob and gaiter on a Peugeot 206 from years 2002 to 2009. Thanks for watching. Please comment, like and subscribe !.
~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.
🚗 Gaiter ~ amzn.to/3PvsJuf
🚗 Gear Knob ~ amzn.to/3yZJh6C
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.co.uk
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.
Thank you so much for this video! The dealer quoted me over $300 to replace. I bought the part from them and did it myself.
You're welcome !
Wow 😲 I never knew this,no explanation, but just actions only, indeed action speak louder than words 👍
Before I installed new front speakers on my 206 SW ,i did an over the top insulation of the inside of the doors + foam & pieces of thick carpet under the gaiter to quiet the car noises....the difference in DB from the road & sound is great..cheap & easy DIY tricks(with a 10$ yoga-mat..rather that spending 50 on dynamat or boom-mat..!!
Thank you for this video from Budapest
You're welcome, thanks for watching !
thank you very much man!!
Thanks that you share your experience.I will not forget it 😉
Thanks for watching !
Clear and logical, thanks!
Thank you for this video
You're welcome !
Nice Video.Great tip using the Pliers to get that little extra liverage,🧤
Thanks 👍
Thank you for explaining!! 🥰
You’re welcome 😊
Merci, c'est très bien expliqué, y compris la difficulté pour enlever le pommeau.
You are very welcome :)
Thank man❤❤❤
You're welcome !
muy útil!! gracias!!
Thank you !
Grate Thanks!!!!!
You're welcome!
Hey, I was just wondering if it’s possible to remove that sleeve adaptor as I have bought an after marketed threaded gear shifter with a threaded knob adaptor to fit it. If able to remove the knob sleeve I would put the threaded adaptor turning my short shifter into a threaded one making it easier to change gear shifters.
I'm not actually sure if it can be removed without destroying it to be honest
@@screwsnutsandboltsI replaced my gear knob a couple of days ago, i bought an after market adaptor as well just in case and indeed the "white stuff" broke as i took it out and it was hard to cut it. After that when i replaced it with the after market, the hole was bigger and my gear was always making turns, it wasn't steady... I kinda found a solution with some silicone, but i don't know if it'll keep it up.
how can i install an aftermarket shifter, do i need to remove the white plastic?
If the new one already has its own insert built into it then you will need to remove the original one from the gear shifter stick
I want to do the same how do you do it?
How do you remove that white plastic on the shifter?
I think it's glued on so I don't think there's any way of removing it without destroying it.
👍
Thanks !
Is this the same method on the 406 model?
I haven't worked on a 406 so I'm not sure but I expect it's quite similar
May I ask what setup you use to film this? How do you mount the camera in that position.
I use a small adjustable camera mount with a clamp, like one you can attach to a bicycle handlebars, and I clamp it to anything I can :)
Can you remove that white stuff?
I think that's glued on. It would probably be destroyed talking it off.
That "white stuff" is completely broken in my car, how do I replace that?
1000th like.
Thanks :)
@@screwsnutsandbolts Thank *you*. I just changed my 206's gear knob and gaiter, the video was very helpful.