Just changed out my backup camera today. I could not have done it so quickly without this video. I would have struggled for hours finding all the hidden bolts. GREAT VIDEO! The only thing I did differently was to pop out the interior light and unplug it first with a trim tool.
Not bad for a handheld smartphone video. I was more interested in the panel removal since mine is loose on one side. Looks like more effort than it is worth but the video was helpful.
I have a base model grand caravan 2013. I found an original touch screen radio from another Grand caravan at the scrapyard. Now i want to get the camera too. Do you think the wiring for the camera still be in the trunk door ? Since my model is base i probably dont even have a camera connector over there. thank you
Hello, most likely there will be no wiring for the backup camera if it was not originally equipped. Your better bet would be goin with the aftermarket camera or you will have to pull all the wiring
Hmmm it can be quite a challenge as it might have to be drilled out if there is no other way to remove it. Things like this happen quite often especially on older vehicles and it adds a lot to the labor time
Thanks for the video! So I have an 09 Routan and the process was SIMILAR but not exact, turns out I ordered the wrong camera, the part number for the camera on the 09 Routan is 5026338AB and they want $500 for a new one! Hilarious! Well you can hack in an off the shelf backup camera. Look at the plug going to the camera, it should have 4 main wires, color may differ but hopefully you have Green\white = 12v Black= Ground Smaller gauge wire Black = video ground Red = video Signal You can wire in any 12v backup camera this way (May have to get an RCA pigtail or make your own).
Thank You for the video. Unfortunately for me 3 of the 4 bolts (at 4 minutes and 32 seconds), just kept spinning. Wouldn’t come off. 🤷🏻♂️ Looks like I’ll have to call the professionals. 😂
Sorry to hear that. I know the feeling and unfortunately it happens quite often when fixing cars. Something that is supposed to be simple gets very complicated
I am at the same point in the procedure, and the same thing happened to me. It looks like to me that the same thing happened to you. At 5:24 it looks like you have two broken studs with nuts on them. I would have liked to see how you repaired those, and I apologize if I am incorrect and commend you on an excellent disassembly video.
Just changed out my backup camera today. I could not have done it so quickly without this video. I would have struggled for hours finding all the hidden bolts. GREAT VIDEO! The only thing I did differently was to pop out the interior light and unplug it first with a trim tool.
I'm glad my video helped you out :)
Sir, you did fantastic showing how to do this. Excellent work!
Thank you kindly!
Your video is excellent! You made my experience of installing a new camera a breeze. THANK YOU!!!!
Glad to help :)
Not bad for a handheld smartphone video. I was more interested in the panel removal since mine is loose on one side. Looks like more effort than it is worth but the video was helpful.
Glad my video helped you out :)
Fantastic video - great job!!! Worked perfectly for my 2011 Chrysler Town & Country Touring L
Great to hear! Thanks for watching :)
Perfect thank you sir for your help and time
No problem. Glad to help
Hello, I loved your video, I live in Mississauga, what wreckers did you get your camera from?
Thanks for watching. I got it from small private wreckage near Edmonton
I have a base model grand caravan 2013. I found an original touch screen radio from another Grand caravan at the scrapyard. Now i want to get the camera too. Do you think the wiring for the camera still be in the trunk door ? Since my model is base i probably dont even have a camera connector over there. thank you
Hello, most likely there will be no wiring for the backup camera if it was not originally equipped. Your better bet would be goin with the aftermarket camera or you will have to pull all the wiring
I have tried to install wireless Autovox camera but it prevents from opening gate handle.
Anyone has any experience with that ,ideas ?
Thank you.
What can I do if one of the 10mm from the side spins freely? The mechanism that holds it in place under the plastic has failed.
Hmmm it can be quite a challenge as it might have to be drilled out if there is no other way to remove it. Things like this happen quite often especially on older vehicles and it adds a lot to the labor time
Thanks for the video!
So I have an 09 Routan and the process was SIMILAR but not exact, turns out I ordered the wrong camera, the part number for the camera on the 09 Routan is 5026338AB and they want $500 for a new one! Hilarious! Well you can hack in an off the shelf backup camera.
Look at the plug going to the camera, it should have 4 main wires, color may differ but hopefully you have
Green\white = 12v
Black= Ground
Smaller gauge wire
Black = video ground
Red = video Signal
You can wire in any 12v backup camera this way (May have to get an RCA pigtail or make your own).
You're welcome and thanks for sharing your knowledge regarding wiring in a backup camera
Thank you brother you are the best
You're most welcome :)
Graciassss!! Paso a paso ! Y hicimos el cambio sin problemas!! Gracias x la ayuda!!
You're welcome :)
Thx bro! It was helpful
You're welcome. I'm glad to hear that
Thank you
You're welcome
Thank You for the video. Unfortunately for me 3 of the 4 bolts (at 4 minutes and 32 seconds), just kept spinning. Wouldn’t come off. 🤷🏻♂️ Looks like I’ll have to call the professionals. 😂
Sorry to hear that. I know the feeling and unfortunately it happens quite often when fixing cars. Something that is supposed to be simple gets very complicated
I am at the same point in the procedure, and the same thing happened to me. It looks like to me that the same thing happened to you. At 5:24 it looks like you have two broken studs with nuts on them. I would have liked to see how you repaired those, and I apologize if I am incorrect and commend you on an excellent disassembly video.