14 Spray Painting Tips
Вставка
- Опубліковано 16 гру 2020
- Big thank you to Fleximount for sponsoring this video:
Buy from Amazon: amzn.to/2LNbB7f
Buy from Fleximounts: bit.ly/2WoIc5s
Check out my other Tips and Tricks here: • Tips and Tricks - Apri...
Patreon: www.patreon.com/user?u=257047
Instagram: / wilker_dos
Website: www.wilkerdos.com
Facebook: / wilkerdos
Want to support me? Support the companies that support me:
Triton Tools: bit.ly/2jaC0dD
ISOtunes: bit.ly/2YuZBtr
Rockler: bit.ly/2oWrisB
Armor Tool: bit.ly/2PjJuKJ
Things I Used in This Project:
ISOtunes Ear Protection: bit.ly/2YuZBtr bit.ly/2Cf6OXP
Armor Tools Mobile Workbench: bit.ly/2JL03ix
Plywood Workbench: bit.ly/2LdT3Z0 - Навчання та стиль
![ОРБАН приехал к ПУТИНУ и "отчитался" о поездке в Киев 😁 [Пародия]](http://i.ytimg.com/vi/_0ukDovOWq8/mqdefault.jpg)
Great Tips April! And #15, another simple but obvious spray paint tip, Make sure the nozzle is pointing *towards* your workpiece and *NOT* in the opposite direction. This avoids that common "spray paint selfie" issue... LOL -- that's never happened to me 😜 this tip is for the newbies that might make that mistake.
BONUS Tip #16: I prefer to use one of those grip handles that go over the can and gives you an easy trigger, for better control and no paint on your finger and it also eliminates "spay pain selfies" if you have it pointed the wrong direction, which as I said, doesn't happen to me.
I finally bought a detachable handle and was surprised at how much easier it made the process.
...and cleaner. $3 ones work, but after breaking 2, I spent the "big bucks" (ooooo...$9) and haven't been sorry. So much nicer. :)
buy more then one handle ...someday I will find them keep them with the spray can storage...
Got painter`s finger(it's a thing apparently) once cause I didn`t use a handle... took days to get the feeling back in my pointer finger. Never again. That handle is a life saver!
Always store the cans upside down and it will save you 15 minutes of "shaking" the can. Leave it upside down until a few minutes before ready to use, then lightly shake it and you are good to go. Spray first coat light enough so that it dries within a few minutes. This will give you better adhesion and if there are any defects you can spot repair them quickly and move on. Scuff between coats and tack rag before applying remaining coats. Perfecto!
❤
A good tip that I use when using the same color can, one after another, is to reuse the same cap. If you got a good cap, reuse it and save the new one in a bag. So when you come across a clogged cap, swap it out from a new one in your stash.
Are you talking about the actual cap of the bottle or the nozzle the paint comes out of? A newbie needs clarification. 😀😬😅😉🙃
I saved a lazy susan from the trash and use it for spinning the small items I’m painting. It’s an easy way to reach all the sides.
The most important thing to know about spray painting: Several very light coats give much, much better results than one or two heavy coats.
Speaking as a graffiti artist, you’re missing two very important tips:
1) if you don’t want runs in your paint, only get about 70% coverage on your first pass, then 100% coverage on your second pass. And always let the previous coat fully dry before your next coat!!!
2) don’t look at the nozzle of the can, look at where the paint is hitting the wall.
Instead of leaving the can out in the sun to warm, you can just ran cans under warm running water for 30-60 seconds to bring them up to temperature. The metal can will absorb heat very fast from the water, so you don't need long. Alternatively, if you're using a bunch of cans and switching between them on a project, I like to fill a shop sink or tub with warm water and set all of the cans in, with some bricks or other heavy things to hold them down. Then they can all stay comfy and warm while you work.
One of those pistol grip handles you can put on on cans of spray paint is a life saver. I bought mine on a whim when they were on a feature by the displays and even though they seemed like a gimmick at the time, boy have they made it so much easier.
I also made a device to shake the cans using a jigsaw or a sawzall and that is an arm saver, you can make one using some metal hose clamps on plywood with an old saw blade bolted to it. Only takes 10-15 seconds and it's perfectly shaken.
Thanks April, for the ideas. I've been painting for a long time (we don't bother mentioning how "well" the painting has gone.) but it's mostly been rattle cans and such. There's always room for a brighter idea!
I used to use pizza box spacers as a paint / finish stand
If the suns not out, soak the paint can in warm water to warm up the paint can.
Also, spray through a toilet paper tube to contain overspray or if you in a tight spot.
Save the spray can caps they make good stand offs.
Brilliant!
what are stand offs?
@@livintheislandlife7561 Stand off are used to raise whatever you want to spray paint off the table allowing you to paint the edges. This will keep the part from sticking to the table after the paint has dried. I find spray can caps work good for this.
3:38 I've done this with two different colors (yellow and red) to get a very passable orange when I didn't have orange on hand. I was surprised at how well this worked. The target object was the body of a model rocket, and I swept the combined paint spray vertically along the body. I was somewhere around 13 at the time.. lol.
OLD LEATHER SMITH here, Nice Job, I use EVERY Thing you showed in my shop the only difference is I only have oil dye & stain, PLEASE HAVE A MERRY CHRISTMAS AND A SAFE AND HAPPY NEW YEAR, GOD'S BLESSINGS ✝️⚾🙃
I recommend one of those cheap trigger things to save finger fatigue and spray on your finger.
The Pewpew Attachment! I have one.
@@doubledarefan Funny you call it a "pew pew" attachment.. I use mine at the pistol range to recoat steel targets with cheap paint. So double the "pew pew" relevance.
Thanks for the spray painting tips. You are correct. It's always good to be reminded of proper techniques.
I have installed the overhead racks in my daughter's garage. They are super sturdy and easy to install. She loves them.
Stay safe.
Love the little improvised stands. Also pleased by your sponsor - I installed a set of those same wall mount shelves about a month ago, surprisingly easy to do without help, made a decent "my first lumber rack" for a tiny workshop...
Main tip from me April is to spray in the direction of view. For example, As a car sprayer of Rolls Royce, Bentleys and other prestige vehicles we spray doors, wings with them in an upright position as that is how you view it in real life. We spray bonnets, boots, roofs etc in the horizontal position as that is how you view them in real life.
Spray a door that is laying on a bench in a horizontal position will look a slightly different colour when refitted.
Recap. Spray each item with that item in its orientation of fitting and results will be better.
☺
thanks!
@@bruce-le-smith thnks too 👍👍🤝
Hi April thanks for all the tips you share with us. They're so simple but so useful.
Thanks April. I have just started using spray paint with small pieces and turnings. The tips will help a lot.
Tip 16 - wear disposable gloves. No matter how hard I try, some paint always gets on my hands.
Getting skin oils on a piece after wiping down with solvent partially defeats the cleaning too
For the runs on the paint you can use masking tape by tearing off 8-10 inches and make a circle so that the sticky part is facing out and tap on the paint that has a run and will make a cleaner and smoother surface as well.
yes or better yet blue painters tape, just let it touch the run and presto it's gone. had to check to make sure no one else had beat me to it :)
Thanks for your awesome enthusiasm and a go get it attitude. Your folks did a great job and appear to be down to earth, hardworking folks. Keep up the awe inspiring work. I hope I might to get to say hello in Atlanta some day when all this weirdness settles down. You make it feel like family. Don't change that. I wish all of you and yours well.
Great tips, thank you April !
Always a pleasure to see you April ❤️. Great tips💯🤙🏾
Good tips all!!! Merry Christmas!!!
Great tips! One I would add is to get yourself one of the pistol grips that attach to the top of the can. They are not very expensive and make using a rattle can so much more like a paint spray gun.
Nice reminder. Thanks.
Thank you for the excellent ideas
very handy tips - thanks for sharing
What has always helped me, boil a jug with water and empty it into a small bucket, then drop the spray can in and leave it for 5 minutes. Hopefully the temp of the can will get up 60 or 70 degrees.
The paint will come out warm and fluffy, will adhere brilliantly, dry evenly and quickly, it’s the best spray can paint tip ever.
Super helpful, thanks!!
great video April, thank you
The dabbing off runs is a new one for me, thanks April !!!
Great tips and amazing you know all these little things that will make a difference.
Great content thanks for sharing
Merci beaucoup April ! Your tips will certainly help the poor builder that I am. Thanks also for all your videos 🙏
Great tips!!
You posted this only after I had finished painting a train track table for my grandsons - good thing I didn't make to many mistakes. Great tips - thanks and Merry Christmas!
Go with the Adam Savage impatience method, keep a hair dryer around so you don't have to wait between coats.
Hey April, great tips on spray painting. thanks
My "tip" over the years is to PRIME everything I paint.
It makes adhesion incredibly easy and the number of coats required go WAY down.
AND I don't have to go with several thin coats and be frustrated by waiting etc . . Just ONE coat is usually all that is needed on a PRIMED surface - and no runs either.
Just use a spray paint that's both, a lot of them are nowadays
Thanks for this information April.🌸
Thank you!!
Duct tape or hose clamp the spray can to a worn out sawzall blade and give it a couple of seconds ride and the paint will be well shaken.
Thank you!
Thanks for the tips April! 😃👍🏻👊🏻
Beautiful. Good job my friend
All very good tips!
Awesome tips. Tried my first spray job then chickened out and pulled out the brush. Will give it another shot.
Thanx for the awesome tips it helps. Its not a spray paint tip as such, but I always cut the empty can open there is actually pretty marbles on the inside. I like to collect them.
Great tips! I spray paint often and didn’t think about a few of these. Thanks! Great video! 💚
Merry Christmas to you and the family. God bless
Love your suggestions, thank you!
Glad you like them!
After a spray can is empty, I clean the tips in solvent and store them in an Altoids tin for reuse.
That's a grand idea, Thanks
Love these
After clearing the nozzle by spraying upsidedown, I remove the nozzle and put it in a glass jar with some paint thinner. When I need a nozzle, I fish one out.
Great Info!!! Thank You Miss!!! I always flustered when they don't work right. 🌹👍😎
Great video
Thanks April. 👍
Handy tips!
Learned a lot!
Thank you!
Glad it was helpful!
WOW thanks. Dang another great tip list! Hey! Merry Christmas.
I honestly didn't know the tips are interchangeable. I put cans in warm water sometimes I even use a torch at the bottom because this pressure the can so all the paint comes out smoother like when the can was full or a air pressure gun
Thanks!
Good vid. I’ve had good luck using auto body filllers, like glazing putty for small imperfections
Great tips!
I'm so glad you're not in Oregon or I would be "dropping by" with questions on a daily basis.
Very helpful. I've been considering taking two of the slatted end pieces of an old baby crib and laying them horizontal, covered with a layer of window screen so that runoff can drop to a piece of cardboard below. Having a huge issue painting some 3/4" thick "peeps" with yellow and the paint not applying evenly on the sides. Going to definitely grab a foam brush to do some "dabbing," and forgo the crib contraption for the moment. This is a very helpful video and thank you.
Thanks for the tip on those Fleximount units! Definitely going to be buying one for my garage! Hello 4x8 ceiling mount!!
Great video april👍👍👍👍😀
Tip 11 was my favorite i never knew that and was soo cool thanks again 😀
All excellent tips, plus use a detachable spray handle. They work great! Thanks and Merry Christmas 🎄!
Very helpful! Thanks!
Glad it was helpful!
Nice information
Great tips, thanks for sharing with us April. Merry Christmas to you and your families, have a blessed and safe Holiday Season.👍👍👍👍👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Purchase one of the trigger attachments, I find them a must for even pressure
What Neil said
Came to say this! They are only a couple bucks and is sooo much better for comfy painting
Oh absolutely. Much easier on the finger.
Every time I come across a spray paint tips video I expect to see this but never do. I also watch people paint whole chassis they have made only using their finger and think OUCH! my finger would die.
Nice Tips. Thanks. #STAYSAFE
Store the cans upside down for long term needs. That way the pigment isn't all stuck to the bottom, and the shaker ball makes even quicker work of it all.
Make standoffs from a scrap block and a drywall screw. Your way is a bit more dangerous.
Some newer cans do not need to be turned upside down to clear the nozzle after spraying. It seems that most of those also have a completely different, more comfortable, and not compatible with spray handles, tip.
Curing the paint quickly with a heat gun or propane torch works well, just be careful not to overheat. That will ruin the nice job you just did.
Keep empties around for target practice with the pellet rifle in the back yard. Sometimes they pop with much fanfare and color. Then you can salvage the steelie or marble inside for wrist rocket ammo! Always fun to see if you can shoot the little plastic spray tip from 20 yards, too.
Smart and clever.
Thanks
A. W. Está inovando parabéns pela criatividade.
Abração SP Brasil.
Great! Thank you!
Glad you liked it! Thanks for watching.
Learned a thing or two thanks
Nice information about
Instead of making all sorts of random stand-offs I bought a bunch of plate joiners. These are the spike strips used to join boards on commercially made trusses and rafters. They're cheap, reusable and come in many sizes.
One thing I think you should consider is wearing a mask. I have been spraying painting and airbrushing for years, you would be shocked at the amount of paint on your mask, even when painting outside, when you finish..
Really fantastic tips, April! Thanks a lot! 😃
I'm going to make some blocks with nails for sure! 😂
Stay safe there with your family! 🖖😊
Making a stand is such an obvious yet over the head idea. Why hadn’t i thought of that yet 🤦🏽♀️😂 thank you so much, sis ❤️
April, I am a spray painter when
refurbishing drum shells; I’m also an up and coming drummer.
I would love to know if you have ever spray painted with the over spray design?
My brain has a difficult time getting this technique down no matter how many videos I’ve checked out. You are awesome.
I like those clip on triggers and I use even a crappy dust mask as well as throw away gloves.
Thats some fancy copper bailing wire you got there
Besides John Blystone's recommended handle, wash out a little jar like for horseradish and store still-working tips from empty cans in mineral spirits so you'll be able to find a correct replacement should one plug up in the future..
Wow I’m putting this in my watch later for when I need it problem though with spray paint I think I have arthritis or something cause when I use cans when I spray with the finger my wrist and fingers hurt after like a minute and then I have a hurting hand all day but I really like the nails out the board trick to having stuff stand on top of
Great tips! Regarding tip #10 I'll add that some products are designed to spray from any angle including upside down... for those, just make sure to wipe all of the wet paint off the nozzle.
Agreed. You can't spray clear the tip.
As an alternate way to hear up the can, I use my electric kettle to hear water up to 160/170 degrees and then slowly pour into a water pitcher with the can inside (and weighted down so it doesn't float). Wait a few minutes, then shake the can for a few while you reheat the water for another round
Swap the spray nozzle? I've been frustrated by misbehaving nozzles several times, but now I have something to try if (when) it happens again. Thanks!
You are so nice and brave lady, have many ideas I say you ought to make vedio for bamboo art
Good luck ⚘
To reduce finger fatigue when spraying I use a snap on spray can trigger. Get a good quality one that clamps around the neck of the can. A cheap one will allow the can to fall into your work. Thanks
That's some mighty fancy bailin' wire you're using. :D