@@DuctTapeMechanicI don’t see it. Can you just say which part is it so I can order it? My machine is stopping in the wash cycle, and I noticed it’s not locking, so I am hoping your recommendation will fix it.
I literally thank God for allowing me to find your video so I could fix my own washing machine. It just stopped working, and I was literally shocked because I had spent money doing other things, and a new washer was NOT in the plans. I tried to hire a company to repair it, but the rate was outrageous for me to pay when I knew the problem. I have the same brand and model. I purchased the part for $20.99 on Amazon. After watching your video, I repaired it myself in 10-15 mins, and the washer is working, and the load is already on the rinse cycle! Thank you very much. Be blessed! I will look out for more things from you in the near future. Thanks again!
Those of us who own this piece of junk washer should file A class action lawsuit against ge for all the money we've spent trying to get this junk with the defective locking mechanism to work consistently. I'm SO ANGRY
I watched your video and fixed my washer, even a girl can do it, Video made it so easy to fix my washer. Ordered the part off Amazon for under $45 and replaced it myself with your step by step instructions on video. Thanks !!
Also a woman here whose washer just went out. I’m pretty handy and confident I can fix mine after watching this video. I have this exact washer. Thank you!
Why should you have to fix it at all? I just bought one, did three loads and it stopped working. Warranty service in 10 day. What bullshit. Never GE again.
My lid lock started acting up (turning on and off for at beginning of cycle), then washer would not start. I removed it, one prong looked corroded. I sanded it and scraped it with needle nose pliers. I put it back and now it works
Hi thanks again for helping with your comments I can't seem to find a link to get the part I think I almost have the same washer you were messing with it's closed anyway did you say all the locks are the same Update I found one $14 I'm just going to go with the cheapy the reviews were okay
I am so thankful I found this I do have an engineering degree so I’m familiar with electrical equipment and electronica equipment however I don’t know anything about washing machines and so I saw this relay needed to be replaced and I also am retired so I didn’t wanna have to drag my washing machine out and take the top off and wouldn’t be able to get to it so I was able and I don’t have small hands to squeeze my hand in there remove the clip that goes to the relay and do that all without removing and taking the top off and so far it’s going through a cycle just fine so fingers crossed
@@DuctTapeMechanic It worked for two loads and now it’s messed up again that is probably the control board like the sounds just make even when nothing is running it just makes the little noises like when it’s starting Now it will wash, which wouldn’t do before it wouldn’t even come on before now or wash but it won’t spin and drain I’ve checked all the drain exits that sort of thing it’s not that actually it does drain when it sits there overnight but it just won’t start spinning it’s really strange because it worked for 2 loads then rats...
@@DuctTapeMechanic hi I wasn’t sure if you would have a quick suggestion I replace the lid lock switch the relay and it worked for two water loads and now it will wash but it won’t spin it’s just continually you can hear the relay click in and out when it’s trying to spin and it does that several times and then it just shuts off I’ve been looking at your other videos trying to see if you got an answer could you point me in the right direction possibly
Just replaced my lid lock, which has been janky from day one, and it's still messed up! It decided to stay on lock, right at the finish line! I'm at my wit's end, with this rotten machine, and it's only 3 yrs old!! I miss the old ones, before all this electronic nonsense!
@@Peter-iw6bl I replaced the lid lock and the pump. However, the lid lock still wasn't aligned properly, so I still had an issue...lol! I ended up taking the lid lock off and putting it in its receptacle (can't think of the exact word), and now it works! I don't close the lid, because I don't want the lock moving around, but I don't have little ones to worry about. Sometimes I have to take the lock out and put it back in, but it works. Man, if that contact btwn the lid lock and its receptacle aren't perfect, it won't work!
@@VinceBadovinatz88 the best washers made is the older style direct drive Whirlpools they make several different brands the only difference is the console they make roper Kenmore estate KitchenAid inglis and some maytags I have a Kenmore set that I have been using for 18 years the only thing I have ever had to do is change the heating element in the dryer and the lid switch on the washer
My man just watched this video for 1 min and took 15 seconds to pop out the lid lock without taking the whole top off. A ton of extra steps in this video. Lid lock had tabs underneath and pops right out.
I replaced that part, and reconnected everything but the lid lock light is still on. The lid is up but nothing different happens now. I've unplugged it and still nothing.
So we got the new latch lock that was specified for the model of my GE washer and it did not work nor did it match the parts specified on the QR code on the washer itself. Sent that part back, ordered another and after installation, it finally allowed the washer to fill, and then it stops as the lid lock is still not working. Help!
New lid lock for 6 year old while pool. Striker won't come back out of the switch unless I press the tiny white button with a pin. Both on the machine and out.
My washer keeps clicking and won't spin or drain. Tub is full of water. I think its the lid lock but not certain. I had a pair of tennis shoes in the wash that caused it to shake washer away from the wall as it was not balanced. Have any suggestions or recommendations?
Could be the shaking washer caused the lid lock assembly to break. I have seen that. Is the clicking coming from the top (most likely lid lock) or from the bottom (actuator or clutch assembly)?
@@DuctTapeMechanic sounded like the top. I unhooked the lid lock. Readjusted stuff in the washer. It wouldn't work all night but the next day I put it on another setting and now it works. Not sure what I did but it works. Thanks for getting back to me!
If having a similar issue like washer will fill and then basically shut off won’t spin or drain is it still the lid lock that needs replaced? The lights for soak and wash aren’t lit up and doesn’t register if lid is open or closed
This is happening to me but when i open the lid it fills after stopping then once its in wash i can close the lid. I have an older model though. Im also wondering if this will fix it.
@@DuctTapeMechanic I want to really thank you. Honestly. I watched other videos and they didn't get into the actual problems like you did. I was out of a washer for 2 months trying to figure out what was wrong based off other videos. I legit watched your video Wednesday of this week. Ordered the part the same day and just got it a few minutes ago and let's just say I'm back washing again 🥳🥳🥳thanks again🙌🙌
I checked my lid lock with the lid closed and when i put the leads on the wires the numbers started at 72 then went down to 0.0 or 1. When i tested the lid lock with the lid open numbers appeared too, i think, i cant remember. You said with the lid closed it should be 90. Do you think my lid lock might be faulty?
That's what I'm worried about if I buy this part what happens if it doesn't fix it then I'm another 45 or $50 down the drain I just spent $100 on this machine used I'll never get my money back it didn't work I should have tested it on-site
My washing machine is making loud noise. I follow directions and changing the rear and the I don’t remember what it was that I change underneath of the transmission but it’s still making the noise. There was no debris underneath of it. Wanted to know what’s the next step that I need to stop it from making so much noise Sound like it’s coming from the transmission valve noise
Need some help, if you can. Have one year old washer like this. In a cottage that gets winterized, so it has about 3 months of use. Put in first load, it filled completely, and then did nothing for quite awhile, then drained out. Now it wont even fill. Just sits and makes a chittering sound (like it's sensing?)before shutting back off. Have done the diagnostic mode, door lock has passed the continuity test (though sometimes gets hung-up on release), blew out pressure line, stuck drill bit into lower air hose nipple. Belt is fine, both motor and basin spin freely. Could the lid lock be the whole problem, even though it does lock? Frustrated and at a loss. Thank you so much.
I was going to suggest cleaning out the port for the pressure hose but you already did. That is often times the culprit so good job. I think at this point the lid lock would be a good bet. Best of luck
I have a question, although I see this is three mths old, I'm hoping you can help, before I take the top off completely. I can see the screws holding the top down, but there are also smaller screws, holding wires down. I'm hoping the screws holding the wire ends down aren't holding the top down, as well, and maybe they're very short? Looks like I have the same washer. If you can help me, I'd sure appreciate it!!
Hi. Thanks for the video. I have the same machine with the same problem. I tried to order the part from amazon with your link. The link you posted does not work
My washer will not start at all, but the lights will light up and the lid lock will click a couple times then stop. Then you hear the sound indicating a wash cycle is finished. All this but the machine will not start a cycle. Does this sound like a bad lid lock or something else?
I got a couple nice$3,000 sets of washers and dryers and stuff and kept having problems year after year so I went to a yard sale the other day and I found an old washing machine Maytag for like $80 with a rock in the bottom of and hooked it up and I have been doing laundry for the last three years with that old wore-out Maytag and it works so good
I have 50 v coming from my circuit board to lid lock. Both from the board and from the harness. Any recommendations? Could something else be drawing excess power or should I just replace the circuit board?
Hi, I was hoping this would tell me why my agitator and basket don't work independently. I purchased my GE GTW335ASN2WW about 15 months ago and the agitator and drum have always been like one unit. I thought that was normal (and very annoying) but someone told me they should work independently. Any thoughts on why and how to fix that? I have googled the question in many different ways but cannot find any answer. Thank you in advance.
Hi! Thanks so much for your video! I hope to do this repair as soon as I get the part. Can you please tell me what the tool is called to unscrew the bolts and the size I need? Thanks so much!
It is called a nut driver. If you go to Harbor Freight and get the SAE nut driver set should be around $10 you will be golden to handle almost any appliance repair. Best of luck!
I have this washer and all of a sudden it does not want to start. It lets me choose a mode but then locks and unlocks repeatedly like 5-6 times and never starts. The Pause light also stays blinking. Anyone know what might be wrong
I have ge washer it stopped during spin and I thought maybe hose was clogged drained water then tried to start it it won't start now. I have tried plugging in and resetting it. Do you think it's the lid lock? It has clicking noise it locks but won't start cycle
Thanks for the video it was helpful do you think I could bypass a couple of wires with a jumper cable. So I could work the machine with the door open sometimes. Also I wouldn't have to buy the stupid door switch
I bought the machine used I like the old-fashioned ones that I can open the lid with and do some hand washing. My old one finally broke and I bought this I didn't even know they were like this. Do you think I can jump 2 of those wires and get it to work
Do not jump the wires on this machine. Unlike the old machines this is not just a lid switch it is also a lid lock, therefore you can damage the control board by trying to jump it
If it is a model similar to this one then I think it is not the lid lock other wise it probably would not wash at all. Without actually being there, I would say there is an issue with the mode shifter.
Do not try to bypass the lid switch it will most likely burn your control board. Unlike the old school washers, these are not just switches but also have a solenoid which locks the lid.
@DuctTapeMechanic my Kenmore series 200 won't start. I unplugged it and tried to start it. It clicked a couple of times then it goes to lid lock. Is this the same issue? How can I fix it?
I have one just like that just not as many knobs and when you hit the start button the water will run into it for about a second then that's all it will do but fill light stays on I don't think the lid switch is bad because you can flip it over to the drain and spin cycle and the lid will lock I hate these appliances with computers
My GE Profile washer says Lid and it will not do anything. It wasn't off balance. I had just washed a load. Do you think I need to replace the Lid thing?
I have the same issue and just replaced the lid lock if I put it on drain ans spin it locks and runs fine but on any other cycle it will fill and then drain do you think the new part I got may be faulty? Or another issue?
my GTW330ASK4WW is not filling up and won't successfully spin to drain out the water. i've reset the lid after unplugging it... and it worked for 1 load but now it's not working. the lid is locking though when i put it into spin. would this be an issue with the lid lock mechanism even though it's locking?
Can you please provide the original GE OEM part number in the video description as you stated in the video? Looking at the provided amazon link, it appears this is replace 1 of 3 potential parts. Thank you! Video looks most helpful and I'm hoping this fixes my problem. My wash actually starts and puts some water in the machine. The locking mechanism actually actives, but the lid lock lock light never turns on. Then it just times out. Do you think it's the same problem even though the top does lock? Thanks again.
I have a GE GTW330ASK3WW washer, and the locking mechanism is clicking 3-4 times, and won’t start any cycle. I’ve tried leaving unplugged for several minutes. Doesn’t work. I’ve tried doing that again on top of turning the circuit breaker off, and then back on. Doesn’t work. What is happening? It’s causing my family and I to argue against each other.
I could not open the lid. So I took a knife, lifted the lid to get a knife in there and I cut it off. So I can open the lid but the machine will still not start. It still thinks the lid is locked. So F'ed up. I want to disable the lid lock completely. I don't want the lid lock at all. It serves NO purpose!
Here u go a new link for the lid lock mechanism. www.amazon.com/WH01X27954-Replacement-290D1580P004-290D1580P001-290D1580P002/dp/B0CGV9VPVY/ref=asc_df_B0CGV9VPVY/?tag=hyprod-20&linkCode=df0&hvadid=675668942552&hvpos=&hvnetw=g&hvrand=13377694247124940523&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9032521&hvtargid=pla-2245443581439&psc=1&mcid=e57419387bfc3558972f4caa776469ff
On my GE model I actually just unscrewed and removed the part that is on the lid. Then I just left it pushed into the assembly so the machine 'thought' the lid was locked when it really wasn't. Not all brands/models have the top thing that can be removed though.
The link to the one you recommended does not work.
Looks like the link I posted got corrupted. I went back and added a pop-up link to the correct part. It should be around 5:32 mark in the video.
@@DuctTapeMechanicI don’t see it. Can you just say which part is it so I can order it?
My machine is stopping in the wash cycle, and I noticed it’s not locking, so I am hoping your recommendation will fix it.
@elainebittencourt8976 hi, the part pops up on the bottom of the screen in the video. It's a pop-up ad, and it will take you to the exact part
Single mother of 4 here. I just followed you step by step and made the repair myself. Thank you and any blessings ❤
Awesome! It's comments like this that keep me motivated!
Thank you, 75 years old woman got it replaced works great.
Awesome! Comments like these keep me motivated!
You're just "AWEOME!" helping people deserves acknowledgement "THANK YOU for being KIND!!
Thank you for the encouragement!
This video is excellent. All DYI videos should be like this. Thank you for making it!!
Thank you 😊
I literally thank God for allowing me to find your video so I could fix my own washing machine. It just stopped working, and I was literally shocked because I had spent money doing other things, and a new washer was NOT in the plans. I tried to hire a company to repair it, but the rate was outrageous for me to pay when I knew the problem. I have the same brand and model. I purchased the part for $20.99 on Amazon. After watching your video, I repaired it myself in 10-15 mins, and the washer is working, and the load is already on the rinse cycle! Thank you very much. Be blessed! I will look out for more things from you in the near future. Thanks again!
That's wonderful! Glad it helped you
@@DuctTapeMechanic 🙌🙌🙌me too!
did the part you ordered come connected with a black wire?
Those of us who own this piece of junk washer should file A class action lawsuit against ge for all the money we've spent trying to get this junk with the defective locking mechanism to work consistently. I'm SO ANGRY
These machines certainly have a lot of problems!
I will never buy another GE product. Absolute garbage.
I've had two of these pieces are garbage. I HATE them. Unfortunately it was the only washer available in the store!
I watched your video and fixed my washer, even a girl can do it, Video made it so easy to fix my washer. Ordered the part off Amazon for under $45 and replaced it myself with your step by step instructions on video. Thanks !!
Great job on getting your washer working! I'm glad you found it helpful
Also a woman here whose washer just went out. I’m pretty handy and confident I can fix mine after watching this video. I have this exact washer. Thank you!
About tonsave me hundreds of dollars thank you
Why should you have to fix it at all? I just bought one, did three loads and it stopped working. Warranty service in 10 day. What bullshit. Never GE again.
@josephharrington3150 that's user error unless you bought used. My washer is 4 years old and I just replaced my lid lock for the first time
Because of your video, I was able to fix my washing machine myself! Thank you!
Glad I could help! Great job doing it yourself!
thanks for the link to amz and thanks for the straightforward explanation, especially the test in the back which i will do before ordering anything
Glad to have helped!
Could not have done it without your video! Thanks.
You are welcome!
Was able to fix my washer. Thanks! Btw instead of using a putty knife to remove the white piece, just push it out from the bottom.
Thank you for the video! I fixed my washer today , it was pretty easy.
Awesome! Great job!
Thank you! I have used several of your videos, informative and easy to understand.
You're very welcome! That's awesome to hear!
My lid lock started acting up (turning on and off for at beginning of cycle), then washer would not start. I removed it, one prong looked corroded. I sanded it and scraped it with needle nose pliers. I put it back and now it works
Great work!
Thank you for this comment! I did the same and was able to fix it without buying a part. I really appreciate it!
Hi thanks again for helping with your comments I can't seem to find a link to get the part I think I almost have the same washer you were messing with it's closed anyway did you say all the locks are the same
Update I found one $14 I'm just going to go with the cheapy the reviews were okay
Just ordered my lid lock from amazon but i removed the older one i hope this work !! Thx for the video !!
Best of luck!
I am so thankful I found this I do have an engineering degree so I’m familiar with electrical equipment and electronica equipment however I don’t know anything about washing machines and so I saw this relay needed to be replaced and I also am retired so I didn’t wanna have to drag my washing machine out and take the top off and wouldn’t be able to get to it so I was able and I don’t have small hands to squeeze my hand in there remove the clip that goes to the relay and do that all without removing and taking the top off and so far it’s going through a cycle just fine so fingers crossed
Best of luck!
@@DuctTapeMechanic It worked for two loads and now it’s messed up again that is probably the control board like the sounds just make even when nothing is running it just makes the little noises like when it’s starting
Now it will wash, which wouldn’t do before it wouldn’t even come on before now or wash but it won’t spin and drain I’ve checked all the drain exits that sort of thing it’s not that actually it does drain when it sits there overnight but it just won’t start spinning it’s really strange because it worked for 2 loads then rats...
@@DuctTapeMechanic hi I wasn’t sure if you would have a quick suggestion I replace the lid lock switch the relay and it worked for two water loads and now it will wash but it won’t spin it’s just continually you can hear the relay click in and out when it’s trying to spin and it does that several times and then it just shuts off I’ve been looking at your other videos trying to see if you got an answer could you point me in the right direction possibly
Just replaced my lid lock, which has been janky from day one, and it's still messed up! It decided to stay on lock, right at the finish line! I'm at my wit's end, with this rotten machine, and it's only 3 yrs old!! I miss the old ones, before all this electronic nonsense!
What did you end up doing?
SAME here... its been a piece of junk from DAY ONE and I'm furious!!!!!!!
@@Peter-iw6bl I replaced the lid lock and the pump. However, the lid lock still wasn't aligned properly, so I still had an issue...lol! I ended up taking the lid lock off and putting it in its receptacle (can't think of the exact word), and now it works! I don't close the lid, because I don't want the lock moving around, but I don't have little ones to worry about. Sometimes I have to take the lock out and put it back in, but it works. Man, if that contact btwn the lid lock and its receptacle aren't perfect, it won't work!
@@aneicer4705 Every appliance you buy these days is absolute garbage, and it costs a fortune!
Great video. VERY easy to follow!
Glad it was helpful!
Amazing something so simple,great video thanks for making it
Glad you liked it!
Thank you!! My switch did not fit well and had to sand the edges but otherwise your video helped a lot
Awesome! Great job on the repair!
You can change it without taking the lid off. I do it all the time.
Yes I know the way you are speaking of. I always scratch up my arm when doing it that way, so I wanted to provide another perspective.
This video would be 2 minutes actual running time if done the quick way.
Piece of advice don't buy anything from GE. Their quality and service has gone to s***.
Samsung is the one you want to stay away from it is total garbage
I wish it was worth what you said it has gone to.
@@BringItOn31124 anything with a computer is garbage it's not made to last
@@jdwilmothi I know I shouldn't have bought this machine. I'm going to buy a washing machine but I want to find an old fashioned one
@@VinceBadovinatz88 the best washers made is the older style direct drive Whirlpools they make several different brands the only difference is the console they make roper Kenmore estate KitchenAid inglis and some maytags I have a Kenmore set that I have been using for 18 years the only thing I have ever had to do is change the heating element in the dryer and the lid switch on the washer
My man just watched this video for 1 min and took 15 seconds to pop out the lid lock without taking the whole top off. A ton of extra steps in this video. Lid lock had tabs underneath and pops right out.
Warning that capacitor might have some jolt even if unplugged.
Scared me the way he grabbed it. They can hold enough charge to kill even when not powered
Oh don’t say that! Now I am afraid to do it myself!!
Worked for me! Great step by step directions. Many thanks
Awesome! Glad to help!
I have the same washer. It won’t turn on at all and the lid is stuck in lock. Can you help me?
Thank you, it took hours for simple fix
Your welcome
I replaced that part, and reconnected everything but the lid lock light is still on. The lid is up but nothing different happens now. I've unplugged it and still nothing.
Thanks, great video
You're welcome!
So we got the new latch lock that was specified for the model of my GE washer and it did not work nor did it match the parts specified on the QR code on the washer itself. Sent that part back, ordered another and after installation, it finally allowed the washer to fill, and then it stops as the lid lock is still not working. Help!
Seriously freaking out man. Overnighted an original GE lid lock, replaced and it is still just doing the same thing.
Have you tried sending it into diagnostics it could be the pump?
New lid lock for 6 year old while pool.
Striker won't come back out of the switch unless I press the tiny white button with a pin. Both on the machine and out.
My washer keeps clicking and won't spin or drain. Tub is full of water. I think its the lid lock but not certain. I had a pair of tennis shoes in the wash that caused it to shake washer away from the wall as it was not balanced. Have any suggestions or recommendations?
Could be the shaking washer caused the lid lock assembly to break. I have seen that. Is the clicking coming from the top (most likely lid lock) or from the bottom (actuator or clutch assembly)?
@@DuctTapeMechanic sounded like the top. I unhooked the lid lock. Readjusted stuff in the washer. It wouldn't work all night but the next day I put it on another setting and now it works. Not sure what I did but it works. Thanks for getting back to me!
@@leahforrest9155do you remember what setting it was lol 😢
I just.bought a lid lock and the washer started working but now I can’t get it to unlock. I tried resetting and no luck. Any suggestions?
If having a similar issue like washer will fill and then basically shut off won’t spin or drain is it still the lid lock that needs replaced? The lights for soak and wash aren’t lit up and doesn’t register if lid is open or closed
This is happening to me but when i open the lid it fills after stopping then once its in wash i can close the lid. I have an older model though. Im also wondering if this will fix it.
I replaced the broken lid switch for a friend and it will not go into spin on the drain and spin. It drains the water then shuts off.
I ordered that part and the plug fit but it will not sit in that part that holds the switch it’s too big on one end
This is my issue and im just waiting on the part now. 🤞 . Im ready fo wash at my own house 😢
Best of luck!
@@DuctTapeMechanic I want to really thank you. Honestly. I watched other videos and they didn't get into the actual problems like you did. I was out of a washer for 2 months trying to figure out what was wrong based off other videos. I legit watched your video Wednesday of this week. Ordered the part the same day and just got it a few minutes ago and let's just say I'm back washing again 🥳🥳🥳thanks again🙌🙌
@teaashagood1169 that's so awesome to hear! Made my day!
Can it still be a bad lid lock if it fills with water then stops and does nothing after that?
I checked my lid lock with the lid closed and when i put the leads on the wires the numbers started at 72 then went down to 0.0 or 1. When i tested the lid lock with the lid open numbers appeared too, i think, i cant remember. You said with the lid closed it should be 90. Do you think my lid lock might be faulty?
My ge gtw465asn3ww threw a belt during cycle. I changed lid switch and replaced belt, machine has power but will not start. Any suggestions?
I replaced lock switch but still won’t lock . What control power from board to lock switch ?
That's what I'm worried about if I buy this part what happens if it doesn't fix it then I'm another 45 or $50 down the drain I just spent $100 on this machine used I'll never get my money back it didn't work I should have tested it on-site
great video.The guy shows you how to do it.
Thanks for watching!
Can you just disconnect and not have the lid lock at all?
You can replace this without taking the machine apart no proiblem.. i removed mine today
My washing machine is making loud noise. I follow directions and changing the rear and the I don’t remember what it was that I change underneath of the transmission but it’s still making the noise. There was no debris underneath of it. Wanted to know what’s the next step that I need to stop it from making so much noise Sound like it’s coming from the transmission valve noise
I would look at the clutch/actuator assembly all parts combined are like $80
Ok so how would I wire it so I never have to have a lock again?
Thanks for the diy big help to us
Thanks for watching!
Need some help, if you can.
Have one year old washer like this.
In a cottage that gets winterized, so it has about 3 months of use.
Put in first load, it filled completely, and then did nothing for quite awhile, then drained out.
Now it wont even fill. Just sits and makes a chittering sound (like it's sensing?)before shutting back off.
Have done the diagnostic mode, door lock has passed the continuity test (though sometimes gets hung-up on release), blew out pressure line, stuck drill bit into lower air hose nipple. Belt is fine, both motor and basin spin freely.
Could the lid lock be the whole problem, even though it does lock?
Frustrated and at a loss.
Thank you so much.
I was going to suggest cleaning out the port for the pressure hose but you already did. That is often times the culprit so good job. I think at this point the lid lock would be a good bet. Best of luck
We appreciate for your Diy . More video 📹 ✨️
I have a question, although I see this is three mths old, I'm hoping you can help, before I take the top off completely. I can see the screws holding the top down, but there are also smaller screws, holding wires down. I'm hoping the screws holding the wire ends down aren't holding the top down, as well, and maybe they're very short? Looks like I have the same washer. If you can help me, I'd sure appreciate it!!
The screws holding the wire do not hold the top, you don't need to worry about them. Good luck with your repair.
Can I bypass the lock
Not on this model
Hi. Thanks for the video. I have the same machine with the same problem. I tried to order the part from amazon with your link. The link you posted does not work
My washer will not start at all, but the lights will light up and the lid lock will click a couple times then stop. Then you hear the sound indicating a wash cycle is finished. All this but the machine will not start a cycle. Does this sound like a bad lid lock or something else?
Did you figure it out? Mine is doing this exactly now.
I got a couple nice$3,000 sets of washers and dryers and stuff and kept having problems year after year so I went to a yard sale the other day and I found an old washing machine Maytag for like $80 with a rock in the bottom of and hooked it up and I have been doing laundry for the last three years with that old wore-out Maytag and it works so good
I have 50 v coming from my circuit board to lid lock. Both from the board and from the harness. Any recommendations? Could something else be drawing excess power or should I just replace the circuit board?
Hi, I was hoping this would tell me why my agitator and basket don't work independently. I purchased my GE GTW335ASN2WW about 15 months ago and the agitator and drum have always been like one unit. I thought that was normal (and very annoying) but someone told me they should work independently. Any thoughts on why and how to fix that? I have googled the question in many different ways but cannot find any answer. Thank you in advance.
If the wash shuts down while washing a load of clothes and the lid will not unlock could that be locking switch,
Mines the older one. Less knobs.
I got a sec.new lid sw.
Broke the first sw/forcing the lid back open?
What my procedure?
Thanks much I love this video ❤❤❤❤
Your welcome!
I replacement my lid switch on my whirlpool washing machine but it still having a f7e5 error code how to fix
Hi! Thanks so much for your video! I hope to do this repair as soon as I get the part. Can you please tell me what the tool is called to unscrew the bolts and the size I need? Thanks so much!
It is called a nut driver. If you go to Harbor Freight and get the SAE nut driver set should be around $10 you will be golden to handle almost any appliance repair. Best of luck!
I have one but it goes off when I push the start button. It only works on the bulky load cycle. What can be wrong with it.
My lid lock don't unplug
Thank you!!! Work perfectly!!!
Awesome! Good work!
I have this washer and all of a sudden it does not want to start. It lets me choose a mode but then locks and unlocks repeatedly like 5-6 times and never starts. The Pause light also stays blinking. Anyone know what might be wrong
It might be the switch that he replaced. I already replaced the switch and it still acting up.
Mine just started with the same problem/symptoms. Did you find a fix? Thanks
@@itsmedravfrom1987 faulty switch. Amazon sent me a new one
Will you show how to run the service test mods on showing you how to find out the problem and how to set up a new timer
Great job man
Thank you!
Love you videos. Can i jump the red and yellow wire at the switch end to trick the machine? Its full of water so id like to have it pump out. Thanks!!
Do not jump the wires. It will ruin your control board. The best thing to do is just take the cloth out and get a replacement lid lock.
I got the same washing machine, would you happen to have the part number for it thank you in advance
Hi. The part is linked in the description
What is the cause if you replace it and it clicks or doesn’t open whenever the cycle finishes?
I have ge washer it stopped during spin and I thought maybe hose was clogged drained water then tried to start it it won't start now. I have tried plugging in and resetting it. Do you think it's the lid lock? It has clicking noise it locks but won't start cycle
The lid locks are notorious one these. It is definitely worth trying to replace it.
Hey that’s what is happening to mine. Did you end up fixing ?
Was it the lock?
Can you post another link to this part? The link currently attached no longer works.
Will you make a video on showing how to run the service mod and how to install a new timer please
Can we cross connect the wires so latch doesn't lock but washer always works
No. You will damage the board
@@DuctTapeMechanic I was afraid of that. Can you update the link for the latch? I couldn't get it to work.
Thanks for this informative video!
You welcome!
Thanks for the video it was helpful do you think I could bypass a couple of wires with a jumper cable. So I could work the machine with the door open sometimes. Also I wouldn't have to buy the stupid door switch
I bought the machine used I like the old-fashioned ones that I can open the lid with and do some hand washing. My old one finally broke and I bought this I didn't even know they were like this. Do you think I can jump 2 of those wires and get it to work
Do not jump the wires on this machine. Unlike the old machines this is not just a lid switch it is also a lid lock, therefore you can damage the control board by trying to jump it
@@DuctTapeMechanicthank you darn it
Thanks, it helped me
Glad to hear!
Hi my washer is not doing the spin and not draining the water but it does fill with water and watches the clothes you think is the lid lock?
If it is a model similar to this one then I think it is not the lid lock other wise it probably would not wash at all. Without actually being there, I would say there is an issue with the mode shifter.
i have one of these washers that it just broke the lid lock. i wonder if theres a way you can just bypass it. i only saw 3 wires going to it
Do not try to bypass the lid switch it will most likely burn your control board. Unlike the old school washers, these are not just switches but also have a solenoid which locks the lid.
@DuctTapeMechanic my Kenmore series 200 won't start. I unplugged it and tried to start it. It clicked a couple of times then it goes to lid lock. Is this the same issue? How can I fix it?
I have one just like that just not as many knobs and when you hit the start button the water will run into it for about a second then that's all it will do but fill light stays on I don't think the lid switch is bad because you can flip it over to the drain and spin cycle and the lid will lock
I hate these appliances with computers
My GE Profile washer says Lid and it will not do anything. It wasn't off balance. I had just washed a load. Do you think I need to replace the Lid thing?
Most likely it does seem like an issue with the lid lock
I have the same washer. It will fill but nothing else. After a few minutes it drains on its own. Is the lid lock most likely the issue?
im having the same issue. was it the lid lock
Hi. Did you have success with lid lock replacement? Thank you
I have the same issue and just replaced the lid lock if I put it on drain ans spin it locks and runs fine but on any other cycle it will fill and then drain do you think the new part I got may be faulty? Or another issue?
Clicked link for lid lock but it doesn’t work
my GTW330ASK4WW is not filling up and won't successfully spin to drain out the water. i've reset the lid after unplugging it... and it worked for 1 load but now it's not working. the lid is locking though when i put it into spin. would this be an issue with the lid lock mechanism even though it's locking?
Mine did the same thing 6 months ago, I replaced the water pump underneath the washer simple to do.
Mine is doing the same thing! Did you find out what was wrong with yours?
THANK YOU!!!!
Your welcome!
Can you please provide the original GE OEM part number in the video description as you stated in the video? Looking at the provided amazon link, it appears this is replace 1 of 3 potential parts. Thank you! Video looks most helpful and I'm hoping this fixes my problem. My wash actually starts and puts some water in the machine. The locking mechanism actually actives, but the lid lock lock light never turns on. Then it just times out. Do you think it's the same problem even though the top does lock? Thanks again.
Did you ever figure this out ?
My want start are the lights want come on and it makes a loud noise can u help me thanks
Loud noise during the spin cycle?
I have the same washer and it’s fills but won’t cycle, then it starts to make a clicking sounds on the top right corner! Is it the lid lock?
Sure sounds like it!
@@DuctTapeMechanic ok thank you
Is the lid supposed to lock before it fills up?
Hi, I am trying to fix my washer. Which tool did you use to take out the screw on the interior once you took off the back panel?
You can get it at home.depo
The link isn’t working !
I have a GE GTW330ASK3WW washer, and the locking mechanism is clicking 3-4 times, and won’t start any cycle.
I’ve tried leaving unplugged for several minutes. Doesn’t work.
I’ve tried doing that again on top of turning the circuit breaker off, and then back on. Doesn’t work.
What is happening? It’s causing my family and I to argue against each other.
Sounds like a bad locking mechanism
I could not open the lid. So I took a knife, lifted the lid to get a knife in there and I cut it off. So I can open the lid but the machine will still not start. It still thinks the lid is locked. So F'ed up. I want to disable the lid lock completely. I don't want the lid lock at all. It serves NO purpose!
the amazon link is broken, but this one comes with a black cord LID LOCK & HARNESS
WH08X32657
what would I do with the cord?
Here u go a new link for the lid lock mechanism.
www.amazon.com/WH01X27954-Replacement-290D1580P004-290D1580P001-290D1580P002/dp/B0CGV9VPVY/ref=asc_df_B0CGV9VPVY/?tag=hyprod-20&linkCode=df0&hvadid=675668942552&hvpos=&hvnetw=g&hvrand=13377694247124940523&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9032521&hvtargid=pla-2245443581439&psc=1&mcid=e57419387bfc3558972f4caa776469ff
I replaced the lid lock. It clicks but the pin won't retract to allow you to open the lid. Any ideas? Thank you?
On my GE model I actually just unscrewed and removed the part that is on the lid. Then I just left it pushed into the assembly so the machine 'thought' the lid was locked when it really wasn't. Not all brands/models have the top thing that can be removed though.
There is no way to wire around this?
Nope