Custom Install- Minn Kota Terrova 36v 72” 112lb on a Robalo R200!
Вставка
- Опубліковано 9 сер 2021
- Custom Install- Minn Kota Terrova 36v 72” 112lb on a Robalo R200!
Quick Release Bracket- amzn.to/3so2nja
Minn Kota Plug- amzn.to/3yMIynT
Aluminum Plate- amzn.to/3yWZqbC
Solder Seal Wire Connectors- amzn.to/3B8wiQC
Minn Kota Phone App- apps.apple.com/us/app/minn-ko...
Yes I know I spelled “screw” wrong
www.saltystrikesfishing.com - Apparel & Charter bookings
Insall Minn Kota Riptide Terrova 36v 72" shaft 112lb thrust, Quick release bracket,alluminum mounting bracket. Removing Xi5 Motor Guide trolling motor. On our Robalo R200
For the latest up to date info-Follow us on:
___INSTAGRAM___ / salty_strikes
__FACEBOOK__ / salty-strikes-10525848...
This is a Florida fishing channel for beginners and veterans alike.
New Smyrna , Ponce Inlet , Daytona, Sanibel Island , Pine Island , Cape Coral , SWFL, Key West.
If you enjoyed the episode or the channel let us know, positive feedback is always welcome in the comments below.
You can contact us: saltystrikes@gmail.com
Salty Strikes
P.O. Box 947665
Maitland Fl 32794-7665 - Спорт
Double like ... very thorough and exactly like the install I am beginning today on a Mako. Thanks for posting!
… glad it could help 👍
I just bought a 24 sea fox commander and I really like your install with the aluminum bracket. My anchor locker is just like yours so there is no room to just do an install like I had on my 22 bay boat. Great video.
… thanks, congrats on the new boat 👍. Glad this could help. It’s pretty straightforward, let me know if you have any questions.
Good Job. You made it look simple.
… thanks 🙏🏻, it’s pretty straightforward just takes a little time and made a mess.
I like your video. I’m still in search of a video showing the process of pulling the wire to the batteries. But the video was helpful. Good luck on the water
… easiest way is under the deck by the head step toward the bow port speaker then up the gunnel to the anchor locker. Pretty simple with an electric snake. Take the speaker out to access the gunnel area.
Nice upgrade Chris can't wait to get one for my boat.
… once you get one you’ll never want to pull up another anchor ever again.
@@SaltyStrikes yeah agreed. When I ordered my boat I had a choice between a windlass or the minkoda and at that time I thought the windlass would do me better but I was wrong...lol
Good work sir!!
Lots of pretty color wires and buttons and lights
… 😂😁😁👊💥
Wow! Awesome upgrade! Nice work and can't wait to see more of this Minn Kota in action. Tight Lines!
Alan
Air Cav!
… thanks, review video and comparison to the Xi5 coming soon
Good vid, and informative. I've installed a minnkota ulterra 24v 60in/1.5m shaft ( should have made it 6ft 36v) but what I got works ok ( 6-8hrs run-time in 2mts swell 6-8 knots wind) the shorter shaft allows some cavitation.... but what you have.? You put with. We operate 20-30 in miles off shore in BOP NZ and in some sheltered waters inshore bottom-fishing.Tell Minnkota it's the best thing since sliced-bead.
So my xi5 fw went out. Didn’t wanna wait for a new one got all the parts in a week. Back at now.
Awesome tutorial but it might be a good idea to put a padlock on that quick release bracket.
Excellent tutorial.
Not many videos on the larger installations.
The aluminum bracket was an excellent idea because of the overhang.
So many good details without a lot of blather!
The explanation of your idea of the failure of the other motor was awesome.
Not criticizing but it might be helpful for others....what sealant did you use?
Did you end up painting the aluminum bracket?
And what did you use for a backing under the deck?
Note to others, the plug he used is rated for 60 amps, the 112lb 36volt motor 52 amps max..is adequate for his application
An 80lb 24volt system runs at 58 amps max...I bumped up to the 70 amp plug
… thanks tried to keep it short and sweet, thank as a little longer than I expected. I mentioned it in the video, just 1/4 fender washers on the back side of the deck. Didn’t paint the aluminum, I had a friend that powder coated his. I always use 5200 to seal anything attached to the boat but for the rubber wiring guard just some clear bath/kitchen silicone.
Been waiting over 4 months to get my Suzuki 140 outboard. When they ran my credit they told me that motors were three weeks out. I called them back June and they told me motors would be in some time July.. it’s now august and still no word.. you’re not the only one. Also I work construction for a living and the supply houses constantly have materials on back order
… sorry to hear that, the struggle is real. Hope you get back on the water soon, at least we know it’s not just a few of us.
I waited 5 months on a Suzuki 150 that was 2 months out at 5 months I bought a LOW hour 2017 Honda 150 saved 6000 bucks and asked for my deposit back and they laughed and I said ok I will still buy and take delivery of the motor and just mark it up 2000 bucks and sell it and I had a refunded deposit back in my mailbox the next day and I absolutely love my Tohatsu. It has Tohatsu stickers but it’s got Honda on the valve cover and a few other places
@@sethpurvis8680 … glad you were able to get on the water, we drove by a boat dealer the other day and half the boats didn’t have motors. It’s a struggle.
Did the location of the heading sensor work in the console? Directions say it needs a direct line 24” away from any magnets (ie compass). Thx!
Chris great video, a question, you made a comment about a battery not having 3 of them,since it's a 36 volts what are you doing to powered it up. I'll probably have some more questions for you, I have been looking to get one but just started my research and this video was perfect timing.
… we have single 36v lithium ion battery, here’s a little more about that ua-cam.com/video/ClSkh77YM1I/v-deo.html
Nice brother…
👊💥
Yea come help me put mine in I’m in northern cal I’ll take ya steelhead fishing on the Mighty Smith
I’m waiting on a terrova right now. Website said in stock, now 2-4 weeks.
… the struggle is real! It’s insane trying to get any marine parts, I just kept looking at sites every day, I couldn’t wait 2-4 weeks. Ordered three, until found this one at West Marine actually in stock.
Thanks for the awesome video. Just finished the install and this video helped a lot. The aluminum plate score on Amazon was a game changer. Looks like you didn’t need one of the bow stabilizer supports to keep it from bouncing underway?
I don’t need one but I did get one just in case, I’ll try and make a video about it 👍
It took me 6 months to get mine! Promised in 6 weeks.
Wow that’s a long time , worth the wait though 👍
Excellent video. Best minn kota install yet. I've watched some of your other videos concerning LiFePo batteries and very informative. I just ordered two 24v100ah batteries for my trolling motor and on12v100ah for a house battery. Would you recommend running the two 24v batteries in parallel for the trolling motor(24v minn kota 80lb,72in) or just run one at a time and keep the other as backup. I think I heard running in parallel isn't advised. Seems like they should be fine doing so, but you have a lot of experience.
One 24v 100 battery should be plenty for that trolling motor. If you do run them in parallel check manufacturer specifications. I run two Li Time 24v 200 batteries in parallel in our RV too our Victron Inverter. Remember if your use a lithium for your house battery and want to charge it from the motor you’ll need a DC to DC lithium charger.
@@SaltyStrikes I don't think I am going to charge it from the motor. I can't see using it to complete depletion with just small electronics and general use in one day. I plan on charging it back up when I get home on the specific charger I purchased just for that battery
Very nice job. I will be mounting my new 87 inch minn Kota soon on my 25 center console. one question I have- you mentioned you run lithium- any issues with the lithium power and do you like that over traditional deep cycle gel ? thanks.
Here a link to my new lithium battery, ua-cam.com/video/zbTwT4a5GQ8/v-deo.html
It’s been working great so far, never runs out of juice.
Hi Chris! I have same boat and TM. Have you ever looked at the spring assist and do y ou think it would be a DIY? Keep the great videos coming. Randy
… sorry never hard of the spring assist. Send me a link.
Nice video. I like the aluminum plate as well. You mentioned you have the lithium batteries. Woulds you mind sharing which one you have and if you like it? I just bough the nexgen 36V 40 ah and the same trolling motor. looking to install it this weekend.
… here’s a video on the new lithium setup I have. ua-cam.com/video/zbTwT4a5GQ8/v-deo.html
Cool 😎👍👍👍
Im in AUS ordered the same motor in october, collected it in feb
… game changer for sure , congrats
Hi Chris, great video. It's exactly what I am looking for! I have the MotorGuide on a quick-release plate on my R200. It flexes quite a bit in heavy seas (the base of the motor rocks back and forth). I am thinking of doing what you did (with your old motor) and mount it on permanently onto the boat. Do you think the 1/2" plate will completely get rid of the flexing/rocking?
… once I switch from the 3/8 to 1/2 inch plate all flexing went away. It’s solid now.
@@SaltyStrikes did you use the rubber washers to mount the MotorGuide? The installation instructions says use the washers unless your boat has carpet, but I guess you don’t need them since you have the aluminum plate.
Thank you Chris:i have the same boat just received my minnkota the same as yours. Did you run the wires thru your anker compartment to your battery? That’s what i have to do next.thanks
… yes I ran the wires down the middle, I was only able to do that because I added that storage hatch in the bow.
Great video. One question: the aluminiun plate is essential for the installation?
Un saludo,
Pablo
… If you have a R200 and want to mount it like I did with the shaft stowed over the gunnel then “yes” it’s essential, but if you want to mount it with the shaft sticking across your deck then “no”
Hi Chris. Great video on the Minn Kota 112/72 install on R200 and perfect for my needs. I have MK Ulterra 112/72 on order and arriving in couple weeks to go on my Robalo R180 (2018). Can you explain how you routed wires from helm to anchor locker please and what you used to accomplish that? I don't see any factory conduit/channel. Thx!!
Did you see the hatch I added in the bow seating? I snaked the cable right down the center under the deck, had to drill a couple holes. You can go along the gunnel too and snake it under the deck from the side.
Here’s a better view, start video @6:50 ua-cam.com/video/ClSkh77YM1I/v-deo.html
@@SaltyStrikes Ahh, okay thanks for separate video link. I have glued in factory fish box on my R180 where you have that storage hatch. I might need to remove my fish box then repeat your process or fish tape around my box from head working toward open anchor locker. Appears it's not solid foam like i was worried about and there's room for fish tape? It would be nice if Robalo installed a channel on fishing boats like ours to accommodate wiring a future trolling motor right?! Thanks a ton Chris!!
@@SaltyStrikes I don't know what is, but most all fisherman i know are mechanically inclined like yourself. Nice job sir !!
@@gavin2465 been in maintenance my whole adult life
Great vid!!! Since you upgraded to the thicker plate have you had any bowing issues? Also did you fish the wires from the troller thru that access port behind the step in the head area (I have an R180)? I'm trying to figure out where to run them. Thanks!!
Thanks 🙏🏻, no flexing with the new plate. So far so good. I did run the wires under my deck to the step, I think I should that in this video -> ua-cam.com/video/ClSkh77YM1I/v-deo.html
@@SaltyStrikes that's great news and thanks! Tight lines!!!
@@SaltyStrikes Hey!! I got mine installed exactly like yours and i just wanted to say THANK YOU!!! No flexing at all and spot lock is a GAME CHANGER!!! Thanks again Chris!!!
*Easier than Replacing the Bilge pump eh Chris... Hey, it seems like yesterday... but you just got that now broke XI brand new & installed right Before Christmas in 2019 and you reviewed it in Feb 2020... would you still give it as good of a review now?* Thanx for show and tell... G1 ..gw
… another review and comparison video between the two should be coming soon. They both have there pros and cons.
Is this over on park Ave in edgewater?
How did the heading sensor do long term in the head? Thanks again for the info
No issues going almost 3 years now.
Those wire splice connectors with the heat shrink that you used to connect the motor wires to the plug, Did you buy them seperate or did they come with the motor or the plug kit?
… separate, link is in the description area 👍
That's a nice storage facility!! Wish ours had a cover.
What do you all pay for that a month?
… little over $200, cover, power, and ice machine
Chris, I'm installing a 24V, 60" 80lb onto my Robalo R160. Can I mount my unit on the opposite side of the boat? Facing your boat, your unit is mounted on the right. Can I mount mine of the left? Does it matter? Also, do you have to sink The Main control unit with that small round (12V sensing directional devise) ever time you go out? Or is that a one time thing ?
Chris, also. You ordered your aluminum mounting plate off of Amazon? Can you explain how you found that piece of mounting plate off Amazon? Thank you , Dave
…. Doesn’t matter which side you put it on. You only have to sink the directional puck once, after that it automatically connects. There’s an Amazon link for the aluminum plate in the description area of this video 👍
I did not have the directional puck in my unboxing? 36 volt 72" shaft trolling motor.
… didn’t you get the Motor Guide?
WHAT SIZE WIRES AND HOW DID YOU RUN THEM TO BATTERY IN THE HEAD WHERE DID YOU PUT CHARGE PORT FOR THEM BATTERY AND DOES IT NEED A BREAKER OR ANYTHING ELSE
… how I ran the wires and links for all the wires and breakers are in the description area of this video -> ua-cam.com/video/ClSkh77YM1I/v-deo.html
The heading sensor needs to be calibrate every time you go out and use the trolling motor? I
… negative, just once… or if it ever starts acting funky it may need recalibration.
Hey Chris, I have the same boat.... did you cut a hole in the bulkhead behind the stair step in the head to get the wires from the batteries to the front of the boat plug? it looks challenging....
… yes, I wanted to run the wires with the most direct root, wasn’t to difficult with a snake. I also added that access hatch and battery switch on the bow seating which made it much easier
thanks for the quick response.... doesn't look to difficult.
Thanks for the video, how did you run the wires from battery to the motor?
… under the deck to the bow, I think I show in a little more detail where the wires are run in this video ua-cam.com/video/ClSkh77YM1I/v-deo.html
@SaltyStrikes thanks, just finished the install, still waiting for battery to arrive, everything is ready, can't wait to try it out
@@jurrOK … awesome 👊💥, hope this video helped! It will be a game changer for sure 💯
Question how and where is your batteries for trolling motor placed.
In the head, here’s an old video showing the battery placement, this is the old battery but the same place. ua-cam.com/video/99qB_D6IncM/v-deo.html
How many AH is your battery and how long will it power the motor. I am thinking of a 36 volt lithium and 65AH
ua-cam.com/video/zbTwT4a5GQ8/v-deo.html As far as how long it lasts that all depends on Wind and current. So far I’ve never had this battery run out on me.
The quick connect doesn’t come with the unit in the box?
Negative, it’s separate, links are in the description area.
How far does that aluminum bracket hang past the front of the boat? I have the same exact boat and want to install one of these?
… You want it out far enough so the shaft when deployed is about two inches from the rail. You just set it in place, once you have it where you want it mark the plate on the deck with tape or a pencil.
Will the system function well without the smoke detector looking thing?
… the “directional device” , simple answer is no , it’s essential for the Spot Lock.
You better put a pad lock on that sucker good thing you put the quick release cuz I’m on my third stearin box
… done ✅ 😁👍
Hey Chris, have you had a chance to try it out yet?
… yes sir, already started the pros and cons list for the review video
Did you put any support under the gunnel?
… support? For what?
I have an R200, is the 72" length going to suffice in the gulf? Thanks for the video.
…. 72” plenty, just don’t settle for shorter. If it gets wavy that prop will be jumping out of the water with a 60” shaft.
@@SaltyStrikes great vid thank you... I don't have the boat you guys do, but the top of my gunnel is 44 inches above the waterline at the bow. I really want to stick with the 72 shaft because I don't have good room on deck for longer. Technically I'm ok with the rule of thumb 44 + 27 = 71 shaft length.... Also I don't bottom fish in bad weather... You think I'm ok with 72?
@@davidk7849 … you want that motor at least 12 inches under water at a minimum , always better to have a little extra than not enough.
Where did you get that aluminum plate
… there’s a link in the description area of the video for the Aluminum plate 👍
what the the dimensions for the aluminum plate? 1/2 " thick by ? width and length?
… there’s a link for the aluminum plate in the description area of the video 👍
You don't have a apple phone?
Ordered my Minn Kota 36v 72” shaft in February 2022. Still don’t have it. 😞
… sorry to hear that, have you thought about a refund and looking elsewhere?
Can you wire the directional puck to same battery as trolling motor?
No, puck runs on 12v and trolling motor on 36v.
Got it thanks. I guess can just hook that to my other batteries … I’m thinking I will try the LiTime 36 volt 55 ah. Should be enough for trolling most of day and then charge at dock
@@joemckillop3766 how big is your boat?
24 foot Grady White
@@joemckillop3766 probably want more than 55ah
Probably not integrated because the motor produces an electromagnetic field that would interfere with the compass reading.
… if my phone can point to north, I’m sure they could figure it out on a trolling motor.
Been waiting on a 84 inch rhodan for 4 months and theres nothing in any manufacturers in that length, they are telling me 2 more months yet
…. I was going to order a Rhodan too but ran into the same problem. Good luck , hope they get there act together soon.
Depth finder and trolling motor.
… just trolling motor, the Simrad 3 in 1 transducer is out Bottom Machine.
I know this video is over 2 years old BUT just wondering do you still have your old Trolling Motor, I know it's slim to none BUT, if you do get back to me, Thanks, YES I'm real and NOT a scammer.
Why didn't you send your trolling motor to be fixed Central Florida trolling motor will fix everything would have saved you tons of money just a couple hundred dollar job to replace motor. Had the same problem with mine fixed it up perfectly save me $2,000
… I had a protection plan, recieved a check for a replacement.
Minn Kota "believes" that having the separate puck reduces the interference the GPS could get if it was built in... so mount it far away from other electrical stuff... makes sense to me.
Lame excuse, an iphone 8 could give directional coompass headings.
Okay, all those metal shavings around the bare feet. I use a vacuum now because those shavings will make its way into your skin and even your eyes. Be prepared.
👍👍