Honda Civic Type R (FK8) - MAPerformance Exhaust (Race Version)

Поділитися
Вставка
  • Опубліковано 6 жов 2024
  • Honda Civic Type R Fk8
    Maperformance Race Exhaust
    Maperformance Front Pipe
    Stock downpipe
    Quick soundclips
    No WOT pulls (old gas), will make another video with it
    Thoughts on the exhaust
    Vbands are awesome! No exhaust leaks and gaskets ftw!
    Easy to install especially when paired with the MAP front pipe
    The track exhaust is loud! Louder than the AWE touring/Catted downpipe combo, this is with a stock downpipe paired with it as well
    some drone, but not a significant amount over the Greddy Supreme SP when cruising
    Very little to no rasp, but I may install a small resonator just to see if itll tone down anything
    Best looking tips ive seen yet (burnt option)

КОМЕНТАРІ • 9

  • @FRUNk808
    @FRUNk808 Рік тому +1

    sounds and looks dope. btw can you see the clamps for the tips when looking at your car from the rear? only reason why im still holding off on it.. not a big fan of it

    • @AlphaDigitalFK8
      @AlphaDigitalFK8  Рік тому

      Clamps are hidden. Just gotta rotate it out of sight

  • @nanoracing6863
    @nanoracing6863 Рік тому

    the clamp that came with mines broke when tightening. any other stronger clamp out there ?

    • @AlphaDigitalFK8
      @AlphaDigitalFK8  Рік тому

      T bolt clamps are supposed to be fairly strong. I'd probably replace it with another. I had one break before, and just got a different one.

  • @cminbust6
    @cminbust6 Рік тому +1

    Nice! I got the front pipe and exhaust coming tmrw.same set up as you.downpipe will arrive in a few weeks.any tips on install of any?

    • @AlphaDigitalFK8
      @AlphaDigitalFK8  Рік тому +2

      For the front pipe, be sure to remove the heat shield. Should be 4 10mm bolts and like 2 15(?)mm bolts. For the exhaust buy a spray lube like WD-40 for the rubber hangers otherwise they're a pain to remove. For the rear section with the tips buy yourself a push pin clip remover.

    • @cminbust6
      @cminbust6 Рік тому

      @@AlphaDigitalFK8 So remove the heat shield and keep it off,correct?will there be any long term damage down the road?

    • @AlphaDigitalFK8
      @AlphaDigitalFK8  Рік тому +1

      @@cminbust6 remove it, put the pipe in and then put it back on before you connect the rest of the exhaust

    • @cminbust6
      @cminbust6 Рік тому +1

      @@AlphaDigitalFK8 gotcha.Thanks !