How to Replace Fuel Filter on Ford F150 2004 - 2008 w/ Important Information

Поділитися
Вставка
  • Опубліковано 7 лип 2024
  • How to replace fuel filter on Ford F150: 2004, 2005, 2006, 2007, 2008
    Note that there are two different fuel filters for this generation.
    My 2006 5.4 V8 needed the fuel filter with part# FG-1083
    Fuel Line Removal Tool: shop.advanceautoparts.com/p/l...
    Better Fuel Line Removal Tool: shop.advanceautoparts.com/p/p...
    Fuel Filter FG-1083: shop.advanceautoparts.com/p/m...
    Fuel Filter FG-1114: shop.advanceautoparts.com/p/m...
    Disclaimer: Due to factors beyond the control of Carlos Perez Lobo Media, I cannot guarantee against improper use or unauthorized modifications of this information. Carlos Perez - Lobo Media assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Carlos Perez - Lobo Media recommends to follow safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Carlos Perez - Lobo Media, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Carlos Perez - Lobo Media.

КОМЕНТАРІ • 37

  • @tommiemc4359
    @tommiemc4359 Рік тому +7

    i watched this video and a few others and was able to change my fuel filter -- thank you carlos. i'm a girl without much muscle and no mechanic training and i was able to do this, so i want to encourage other women to give it a try and save some money. i thought changing the fuel filter was much easier than changing the oil filter on my 2005 f-150 FX4 (certainly faster & easier to access). i used the FG-1114 motorcraft filter. i didn't have to bleed the fuel line, i just let my truck sit until the engine was cold and took off the gas cap like a few people suggested and had only about 120 mL (which is half a cup for those who don't do metric) of gas flow out under very low pressure. definitely worthwhile to do on my own. thank you for the video.

    • @carlosperez-lobomedia24
      @carlosperez-lobomedia24  Рік тому

      Great, I’m glad the video could help.

    • @sandrarichardson2713
      @sandrarichardson2713 Рік тому +1

      Thanks Tommie Mc for encouraging us ladies to tackle the things that we think we might have the muscle for--lol. I wanted to do this and keep everything as dry as possible. This tip on the gas cap and the engine cold is a big help.
      My truck is 06 F150 5.4 Triton. It runs fine and good gas mileage but was changing oxygen sensors and could smell gas around this filter. Nothing wet...just wondered if the o-rings on the fuel filter lines need changing sometimes??
      Can someone possibly advise in that regard?
      This is a great video. Really good camera work. Nice explanations and good point on the different size filters. Jesus bless.

    • @howardnez8773
      @howardnez8773 Рік тому

      E #°

  • @eastbaygrease10
    @eastbaygrease10 2 роки тому +3

    Excellent video. Very clear and yours is the only one that covers the two different filter sizes and pulling the sensor.

  • @joeyrizk3275
    @joeyrizk3275 2 роки тому +6

    Release that front fuel line before pulling filter out. It will hold it for you. Also just open up your gas cap that will help slow down fuel flow.

  • @vrm86gt
    @vrm86gt 7 місяців тому +1

    Been meaning to do mine , thanks for the tips, wasnt aware of 2 different size filters, hope i got the right one!

  • @Yairmejia0
    @Yairmejia0 Рік тому +2

    You got my like, great video. Everything worked.

  • @tritonboi8131
    @tritonboi8131 3 роки тому +3

    Great video man thanks I’ll be doing mine in the next couple of days

  • @bobj9747
    @bobj9747 3 роки тому +3

    Good job on making this video. Thank you.

  • @dinodino6907
    @dinodino6907 3 роки тому +3

    Great video,5 🌟

  • @Arcosman
    @Arcosman 3 роки тому +3

    Thanks for the vid kind sir

  • @gregbonetti2782
    @gregbonetti2782 2 роки тому +3

    Thanks

  • @cliffordgallegos6155
    @cliffordgallegos6155 7 місяців тому +1

    Man those safety lock tabs are the worst. Have broken every single one on evey vehicle I have worked on.

  • @shakostarsun
    @shakostarsun 11 місяців тому +2

    Omg this takes like so much elbow grease frak.

  • @aticafloorable
    @aticafloorable 2 роки тому

    sr where I buy the device to remove the filter the link.Thank you

    • @carlosperez-lobomedia24
      @carlosperez-lobomedia24  2 роки тому

      I updated the links for removal tool in the description.
      Fuel Line Removal Tool: shop.advanceautoparts.com/p/lisle-3-8-disconnect-39420/10460683-P?searchTerm=Fuel+Line+Disconnect+Tool
      Better Fuel Line Removal Tool: shop.advanceautoparts.com/p/performance-tool-ford-fuel-a-c-line-spring-coupling-tool-sizes-3-8-1-2-5-8-3-4-w83113/11957862-P?searchTerm=Fuel+Line+Disconnect+Tool

    • @carlosperez-lobomedia24
      @carlosperez-lobomedia24  2 роки тому

      You could also search on Amazon for 3/8 Fuel Filter Removal Tool.

    • @aticafloorable
      @aticafloorable 2 роки тому

      @@carlosperez-lobomedia24 thanks you

  • @jaycapo1193
    @jaycapo1193 10 місяців тому

    I got a super old fuel filter I can’t take out

    • @carlosperez-lobomedia24
      @carlosperez-lobomedia24  10 місяців тому

      Is the tool not working for you?

    • @carlosperez-lobomedia24
      @carlosperez-lobomedia24  10 місяців тому

      Are you able to disconnect at least one end of the filter?

    • @DanielVasquez-oh4bv
      @DanielVasquez-oh4bv 9 місяців тому

      I was only able to take off one side

    • @dr.john-markcain4946
      @dr.john-markcain4946 4 місяці тому

      The engine side is awful…. Liquid wrench, rotate, liquid wrench rotate, liquid wrench rotate… pull like hell … it’s the hard o-ring in the line

  • @DanielVasquez-oh4bv
    @DanielVasquez-oh4bv 9 місяців тому

    I can only get one side off

    • @carlosperez-lobomedia24
      @carlosperez-lobomedia24  9 місяців тому

      It can be troublesome at times. I would suggest pushing in the filter while finessing the tool and then pull the filter out.
      In the video when I took off the second side I used leverage to assist.