Hello, I just wanted to say a BIG thank you for this video I have a tracer 9 and have the same exhaust. The system that you invented for replacing the DB-killer is just genius. We are going to do the same on my bike. So BIG thank you +1 sub
i guess you have already found your answer to this question and im sorry that i didnt see it. ive been sick almost all summer but im back on my feet again
I want to do the same on my bike, but struggle to find rivets that fit. I have found some black ones with a black plastic head, but i don't know how well they handle heat. What kind did you use? I have been looking for some that dosen't need much NM to break
Finally someone with this exhaust.. euro 5 kiling us here.. i need legal exhaust but not to be quite.. is it ebouf just to remove db killer or do i need remove catalys also and put just pipe
Är inne på att köpa ett eftermarknadssystem med cat också, men undrar ifall det skiljer mycket i ljud jämfört med original när man tagit bort db killer? Eller skiljer det inte allt för mycket ändå?
Tillräckligt stor skillnad att det var värt jobbet med att ta bort den iaf. Men hade jag valt att köpa ett system så hade jag definitivt inte valt ett system med cat. Är ju inte jättemycket jobb med att ta bort cat:en heller. det är ju nästa steg ifall jag väljer att göra detta. :)
@@guffemoto okej då kanske jag ska välja båda delarna så man kan byta mellan cat o inte, dock hört många som påstår att man måste mappa om för o inte riskera att förstöra motor etc, dock kan jag kanske tänka mig att många överdriver lite med 😅 man har ju i vilket fall som helst inte lust att sabba garantin genom att mappa :)
Veeeeeeryyyyyyyyyyyyy gooooood resout !!!!! i expect less, now i have to find this machine for putting blind rivets back (please give size of them) and how to masure where to make new hole for new bolt (and did you use original bolt or longer one?) (are those rivets is kinda special for carbon fiber or regular one? and you forgot try to reinstall db killer. i think inside need to have some metal tube/ washer.
Thank for your feedback. The size is in mm 3.2x10mm click the link to the a picture of the package. so special rivets just black aluminium rivets with stainless steal in the body. www.dropbox.com/s/gr3w3p1o29sczp1/20230211_181501.jpg?dl=0 Google MILWAUKEE M12 BPRT-0 to find the blind rivets machine we lined up the 2 holes verticaly and then measured the distance where the hole was supose to be from the center of the hole that is closets to the blind rivets hole. im not going to use the original bolt im making a new bolt today that will be a special made one i will link it as soon as its done.
Go to 6:35 in the video and make an tool like we did or find something that look like that. We just used an gang Rod and bent the end of it. If you don't have a gang Rod you can prolly get one at your local hardware store
@@guffemoto i finaly got it .. try it on the moto and its not that much lauder (its better but not beast, wich is good ) and i put 8mm bolt to close the hole and put back the carbon pice i think will not put back the db killer :D next project removing the catalisator!
The reason i put the hole in the carbon cover is that i dont wanna take away the blind rivets every time its time to screw back the db-killer for the annual inspection that we have to do here in sweden every year. if i dont have the db-killer inside it will not pass the inspection and then im not allowed to drive the motorcycle until its back. i will cover the hole with a black grommet rubber plug and when that is there you will not even noticed the hole. i have it in my backpack right now and i will install it tomorrow after my nightshift. Im also thinking about removing the catalyst to make the system louder but first i want to try how it sound when im driving but that have to wait until spring :)
@@guffemoto Looks good! Where did you find the grommet? Btw I did not know you have a annual check where you need the DB killer. Is it easy to remove the cat on the acra? I might choose the sc project str-1 and install without cat. I like the clean look, no exhaust sticking out. Thx for sharing
Well i agree it was now easy. But im my case it was already on the bike when i bought it. if it was up to me i would have bought a complete diffrent exhaust system. but now when i already have it im happy with the result i got after modding it
Hi there. No i haven't done that yet. I have been thinking about it for awhile but haven't got myself to do it yet. If you don't it can you be kind to post a comment here so I know if its worth doing it or not :)
@@guffemoto hi, I took my catalyst convertor out. Honestly changes a bit sound but not that much… going to try and remove the db killer. I am hoping it is a bit better. Did you see a big difference removing it ?
@@plinggu4312 Hi think the diffrence is big enough that i was worth taking it out for sure. Pls let me know when you have done it cause i still have my Catalyst converter in
@@guffemoto So I juste removed the db killer… (thanks for the video helped a lot) But for the catalyst converter it is hard to tell compared to your video if it is way better… but it is very easy to get out and in so just try and if you don’t like it get it back in. Anyway if you need help on how to remove it you can ask me 👍 and thanks again for the video
Hello, I just wanted to say a BIG thank you for this video I have a tracer 9 and have the same exhaust. The system that you invented for replacing the DB-killer is just genius. We are going to do the same on my bike. So BIG thank you +1 sub
Thank you so much man. i really appreciate it :)
Nice job,all professional tools to make the job easier and clean.
Now time for some fly bye videos 😊
Thanks. Yeah I guess I can fix that when I take out the bike when the spring comes :)
Riktigt duktig mekaniker du har till hjälp 😉
Ja den typen av göbber växer inte på trän ;)
Super bra jobb ju!
Har du numret till mekanikern och är han villig att göra om det för en peng tro? 😂
Tack. Nja han var inte värst intresserad av en massa extra jobb :)
Hi there 👋, could you please give me the exact placement to drill a hole in the pipe? This way, I can avoid removing the rivet.
i guess you have already found your answer to this question and im sorry that i didnt see it. ive been sick almost all summer but im back on my feet again
@@guffemoto can you measure how far the hole you made to remove the db killer is? Thx bro
@@guffemotocomplimenti per il video
Potresti dirmi a che distanza hai fatto il foro, così posso evitare di togliere i rivetti.
I want to do the same on my bike, but struggle to find rivets that fit. I have found some black ones with a black plastic head, but i don't know how well they handle heat. What kind did you use? I have been looking for some that dosen't need much NM to break
i bought black onces that is made of aluminium and iron i dont use plastic. good luck man :)
Finally someone with this exhaust.. euro 5 kiling us here.. i need legal exhaust but not to be quite.. is it ebouf just to remove db killer or do i need remove catalys also and put just pipe
Är inne på att köpa ett eftermarknadssystem med cat också, men undrar ifall det skiljer mycket i ljud jämfört med original när man tagit bort db killer? Eller skiljer det inte allt för mycket ändå?
Tillräckligt stor skillnad att det var värt jobbet med att ta bort den iaf. Men hade jag valt att köpa ett system så hade jag definitivt inte valt ett system med cat. Är ju inte jättemycket jobb med att ta bort cat:en heller. det är ju nästa steg ifall jag väljer att göra detta. :)
@@guffemoto okej då kanske jag ska välja båda delarna så man kan byta mellan cat o inte, dock hört många som påstår att man måste mappa om för o inte riskera att förstöra motor etc, dock kan jag kanske tänka mig att många överdriver lite med 😅 man har ju i vilket fall som helst inte lust att sabba garantin genom att mappa :)
@@guffemotoplease make video how to remove cat
I’m thinking about taking the catalyst converter out, did you do it? Also was the result better?
no i have had the time this summer. i had a big problem with my hip so i have barely driven the bike this summer
Veeeeeeryyyyyyyyyyyyy gooooood resout !!!!! i expect less, now i have to find this machine for putting blind rivets back (please give size of them) and how to masure where to make new hole for new bolt (and did you use original bolt or longer one?) (are those rivets is kinda special for carbon fiber or regular one? and you forgot try to reinstall db killer. i think inside need to have some metal tube/ washer.
Thank for your feedback. The size is in mm 3.2x10mm click the link to the a picture of the package. so special rivets just black aluminium rivets with stainless steal in the body.
www.dropbox.com/s/gr3w3p1o29sczp1/20230211_181501.jpg?dl=0
Google MILWAUKEE M12 BPRT-0 to find the blind rivets machine
we lined up the 2 holes verticaly and then measured the distance where the hole was supose to be from the center of the hole that is closets to the blind rivets hole. im not going to use the original bolt im making a new bolt today that will be a special made one i will link it as soon as its done.
Here is how the special Bolt look like
www.dropbox.com/s/66iu2nljxle7rpp/20230211_222455.jpg?dl=0
@@guffemoto look soo nice, cant wait to try it, but first need to find the needed tools and buy this rivets, tnx bro!
@@guffemoto loool this tool cost 500euro++ i have hand usable for 5$ with will do the same job i hope 😅
Sounds like the standard exhaust before. What did you use to put rivets back in?
its hard the hear the diffrence with the phone recording but insure you it is big diffrence irl. i bought black aluminium rivets
@@guffemoto hello. could you please share the link of the tool that you used to put the rivets back in please? thanks in advance. cheers!
@@shane62872 www.amazon.se/Milwaukee-M12-BPRT-0-Riveting-Machine/dp/B07GFQVDZB/ref=pd_rhf_ee_s_pd_sbs_rvi_d_sccl_1_1/258-4932935-1550868?pd_rd_w=eRqV6&content-id=amzn1.sym.cd976141-9268-4bd9-9578-47e00e708e9d&pf_rd_p=cd976141-9268-4bd9-9578-47e00e708e9d&pf_rd_r=GH9XZ3CDFJ1YREXNBZ7Q&pd_rd_wg=kGiOn&pd_rd_r=d4519f95-f178-414b-9727-8050082f90ae&pd_rd_i=B07GFQVDZB&th=1
HI ! did you use the aluminum or the steel rivets?
Aluminium rivets
you guys think that it will also work with the S-Y7R11-HAPT akrapovic exhaust?
i have no idea. but i guess all akrapovic is made basically the same way when it comes to DB Killer
Bro I manage to drill out pop rivets, unscrew small bolt 8mm but can’t pull the db killer … hooow the f.. to pull this shitt ..
Go to 6:35 in the video and make an tool like we did or find something that look like that. We just used an gang Rod and bent the end of it. If you don't have a gang Rod you can prolly get one at your local hardware store
@@guffemoto i finaly got it .. try it on the moto and its not that much lauder (its better but not beast, wich is good ) and i put 8mm bolt to close the hole and put back the carbon pice i think will not put back the db killer :D next project removing the catalisator!
@@xbassxbassow4881 did ypu remove cat
Like you said, not enough difference. The hole in the carbon wasn’t necessary. But nice job !
The reason i put the hole in the carbon cover is that i dont wanna take away the blind rivets every time its time to screw back the db-killer for the annual inspection that we have to do here in sweden every year. if i dont have the db-killer inside it will not pass the inspection and then im not allowed to drive the motorcycle until its back. i will cover the hole with a black grommet rubber plug and when that is there you will not even noticed the hole. i have it in my backpack right now and i will install it tomorrow after my nightshift. Im also thinking about removing the catalyst to make the system louder but first i want to try how it sound when im driving but that have to wait until spring :)
Here is how it look like with the grommet Rubber plug
www.dropbox.com/s/eucz5u89e4es060/20230212_061021.jpg?dl=0
@@guffemoto Looks good! Where did you find the grommet? Btw I did not know you have a annual check where you need the DB killer. Is it easy to remove the cat on the acra? I might choose the sc project str-1 and install without cat. I like the clean look, no exhaust sticking out. Thx for sharing
You can buy a whole kit on amazon or Aliexpress
www.amazon.com/rubber-grommets/s?k=rubber+grommets
Just take the urinate box off under your bike. Then it's sounds like motorcycle 👍
yeah i would love to do that. do you have an idea where to order the replacement pipe for it ?
@@guffemotoi herad pipe cost like 900 euros
@@aressimbamt0959 Well i will get an whole exhaust system for 900 euro for example an Mivv X-M5 system that i think sounds amazing on a Yamaha MT-09
Do not buy anymore this shit Akrapovic, if they make it so unnecessary dofficult to remove db killer.
Well i agree it was now easy. But im my case it was already on the bike when i bought it. if it was up to me i would have bought a complete diffrent exhaust system. but now when i already have it im happy with the result i got after modding it
I’m thinking about taking the catalyst converter out, did you do it? Also was the result better?
Hi there. No i haven't done that yet. I have been thinking about it for awhile but haven't got myself to do it yet. If you don't it can you be kind to post a comment here so I know if its worth doing it or not :)
@@guffemoto hi, I took my catalyst convertor out. Honestly changes a bit sound but not that much… going to try and remove the db killer. I am hoping it is a bit better.
Did you see a big difference removing it ?
@@plinggu4312 Hi think the diffrence is big enough that i was worth taking it out for sure. Pls let me know when you have done it cause i still have my Catalyst converter in
@@guffemoto So I juste removed the db killer… (thanks for the video helped a lot)
But for the catalyst converter it is hard to tell compared to your video if it is way better… but it is very easy to get out and in so just try and if you don’t like it get it back in. Anyway if you need help on how to remove it you can ask me 👍 and thanks again for the video
@@plinggu4312 came here for that.. in europe we have problem woth europe 5, i want thia exhaust but is it to quite with catalyst..