2021 Yamaha MT09 SP - Stock vs Akrapovic Racing Line Carbon Exhaust Compare & Install
Вставка
- Опубліковано 25 сер 2024
- A comparison of both stock and Akrapovic, followed by a comprehensive install - would love to hear your thoughts and any requests in the comments below.
#2021mt09sp #akrapovicexhaust #racingline
This is the far best video of installment, relaxed precise and perfectly clear. Thank you so much 🙏
Glad you found it helpful and thanks for the feedback 😊
Best exhaust replacement Tutorial Ever, what a blast for giving alot of effort making this.
Love the feedback, hope to keep bringing you helpful content in the future!
@@motobolt7796Thank you, Yes You Do.
This is one of the better videos of this exhaust install. It helped put on my Akrapovic tonight. Took me almost 5 hours (previous owners bent one of the header bolts; not fun).
I installed my akra today with help of this video!
Thank you!
This is the best exhaust installment video and clear as diamond , appreciate it.
Hi, just want to let you know that i followed your video to the word and installed my Akrapovic to my brand new MT09SP yesterday. Took me about 3 hours but i must tell you that your video was better than any manual ir instruction booklet. Im not a mechanic or anything but you simplified the installation process so well that i managed to install easily. Can't thank yoy enough fkr sharing. 🙏
Appreciate you taking the time to make such a detailed video! I just installed my full system easily thanks to you!
What a great video brother. A buddy and I did this install in the middle of the night and it took us about 2 hours. Looking forward to riding the bike and hear it 👏🔥
Great vid. Easiest way to hold the copper gaskets in place is exhaust paste. A small smear on the back of the gasket will hold it in place whilst getting the headers on and help seal them incase of any corrosion or damage, works a treat.
Ho installato da poco lo stesso scarico racing con filtro sportivo e mappatura. Adesso è tutta un'altra storia. La moto è completamente cambiata sia a livello estetico che di prestazioni!
Absolutely gem guide watching in 2024 well done and ty so much
cool install video. would be great to create a video of the exhaust sound whilst riding - ripping through the gears and downshifts etc. tunnel run would hurt either 😺
Just purchased GoPro 10 media mod setup so you get only the best quality, it’s in the pipeline!
Such a great instalation video helps with my anxiety 😅to install one myself
Best exhaust install video I've seen yet, thank you.
Thanks for the detailed video! Just installed mine today🔥
Nicely done installing your full system Akropovic Racing Line Carbon Exhaust. I like the loud base sound of it.
Very detailed video, appreciated.
Thank you, love your feedback 😊
Mate I needed this video earlier haha I just done mine last night and you posted and it was not on the searches properly till now for me. Great video. I found I had not required to move the rad and used the longer socket to the middle and inner header bolts .. def get a evotech rad guard installed . But thanks 🙏 brilliantly done video. The others do not compare to this video on how to.
Have you got the 2021? Appreciate the feedback and shame it wasn’t sooner, uninstalled the Akra last night due to popular demand for a ‘how to video’.. reinstalled original, started the vid, took it off and reinstalled the Akra again😅
@@motobolt7796 haha nic one bro appreciated the video for sure best how to... now you dont need to undo the rad , if you tilt bike up from front you get better access to the headers with long socket! I managed phew. Yep mines on the 2021 ..
@@alf786 well done, I see where you managed!Originally when I lined up the top bolts with the extensions they were scratching the paint off the radiator, so went with the other approach to have more freedom of movement and not strip the nuts in the tightening process with the socket on such an angle.. did you have to remove the lower radiator bracket?
@@motobolt7796 do not need to remove the rad bolts at all.
@@motobolt7796 how do we ever keep the bolts clean and protected from salt and rust that what id like to know
Thank you for this great video!
Thx bro! Best video out here👍🏼 next month gone buy my mt-09 sp 2023… and want to replace the exhaust my self😎
Thanks for this, very detailed and well done installation!
Fantastic instructional video! So thorough!
Great video. Thank you
Always a pleasure, thanks!
Great video nice and slow and you can clearly see how to do the job
Best video. Thank you 🙏💪
Great advice, thanks.
amazing vidéo !! lot of details thank you for this job 🤟
sounds cool but previous gen carbon had a lot more pop and cough to it, which I like
What an excellent "how to" install video. Thanks for taking the time to do it. I have the exact same exhaust and exact same bike. I'll be putting it on tomorrow and now I know just what to do. Thanks again! How does it run with no tune? Same as it did with stock exhaust?
I got it put on. Your video was SPOT ON PERFECT! I guarantee you saved me an hour or two. Thanks again!!
Excellent video, very well done sir.
Ja best video at UA-cam, thanks
Awesome vid mate helped me out👌
It does sound much better with the new exhaust, but the stock exhaust "hidden" design is one of the reasons I love the 3 gen version of this bike. If only there was a way to de-cat the stock exhaust....
That’s why I got the Yoshi one.
I like the hidden also.
How to protect the Akrapovic end can, from accidental tip over
Can you do a video comparing the Mv Augusta F3 and the Yamaha Mt09 a side by side
I whant to know which one it s more bigger
looking good ! any dyno and ecu shenanigans in the near future plans ?
Yeah as soon as we can get access, not much thanks to Covid keeping everything shut
@@motobolt7796 any updates on the dyno?
Very nice well done video!!!
Can't you just leave the sensor where it is routed and just plug it in when the exhaust is in place?
Great videos, I have installed akrapovic exhaust on my bike follow your instruction. Just one question: Did you tightening the header nuts follow the torque in akrapovic manual? They said the torque for these nuts are 22Nm but I'm afraid it will break the maniford bolts.
nice sound, good video 👍
Thanks for your feedback🙏
How much would it cost to get this exhaust and have it installed since I wouldn’t be able to do it myself?
Hello,how can I get the 02sensor extender?
Did you get a tune? Sounds awesome
Use a copper coat grease not glue.
Perfect tuto
Hey this is the same installation tutorial for the tracer 9???
Great!
Hey! after installing the exhaust, did you adjust the fuel maps?
No need but will most likely get a power commander later to enhance it, saves messing with the ECU and voiding warranties👍
Does the mount for the can come with the exhaust?
Did you end up tuning it too?
Where do I buy it I can’t find it anywhere
is there any exhaust sliders that fit this bike?
With the db killer off, does it hurt your ears on the road?
Hello is it comes with db killer for long rides?
fantastic video. Best one I've seen. Speaks English.👏🏻👏🏻👏🏻None of this American bollocks you get.. about sponsorships or my wife's best friends shoes got lost on a ride out. 20 mins wasted taking shit..Perfect installation video. Nice one thank you.. please come and install mine. seems agro with all the cables etc.. Getting mine new year.. Once again Great 👍🏻
Love the feedback ahaha you have a solid point! Can’t wait to keep bringing you quality content, where are you located?
@@motobolt7796 Kent
How loud is it with DB killer?
does it shoot flames?
Yeah mainly on gearchanges and downshifting but not as much as shorter cans I’ve had in the past
@@motobolt7796 Nice, I'm waiting to see what Black Widow will produce for this bike. I've been told they are realising it on December. Can't wait to get rid of that stock exhaust :D
@@povilaslondon they’ve been great with the previous gen and well priced, but hopefully a little more aesthetic! I’m watching for what Austin Racing bring to the party, love the design and finish on their cans. Shame there’s such limited choice for now and bet you can’t wait to hear that music to the ears!
@@motobolt7796 true, the only thing I don't like about Austin Racing is that you need to destroy your oem exhaust in order to fit it. Also for almost a slip on they are way too expensive
@@povilaslondon very true, good point! Although I did hear rumours they’re making a full system for the 2021 MT09.. hopeful as they’ve just brought out a twin can full system for KTM 890 and 1290 Duke’s which sound insane!
God that is such an inconvenience by Yamaha placing that radiator bracket right infront of the exhaust lol
Is that a full exhaust?
Yeah full Akrapovic Racing Line Carbon system👍
It's really hard to tell if it's a full exhaust, maybe he spent hours pulling the headers off and the entire exhaust system apart just to install a slip-on can
@@steveholden4544 🤣🤣🤣
Need remap? Any fault code?
Just plug and play.. and let the good times roll😊
How much wieght you lose??
A Weight Reduction of : 2.6Kg
Power Gain : 4.5HP (3.3kW) at 9600 rpm
Torque Gain : 3.4Nm at 9600 rpm
@@motobolt7796 nice gain in power ...wow 🤯🤯🤯... keep safe always 👌👌👌🙏🙏🙏
@@RomelSinahan unfortunately he's now passed away :(
@@holden486 Sory to hear that ...condolence.. ride in peace 😢
@@holden486 you serious?
man you should get paid for that!
Sounds great but looks like @ss.