Thanks for the video. Ordered the struts for my Prius thinking that was the issue but saw how bad the boots were on the stabilizer links. So I replaced the stabilizer bars instead and that was my issue. Both sides were shot! Appreciate it.
Could also be an exhaust that's broken at one of the welds or the rubbers gave in. If you could be any more specific that would be helpful. Is it in a specific spot you hear the noise at all.
Question fpr anyone that has experience/knowledge of working on car suspension systems: the end of my sway bar, where it connects to the end link, seems like its twisted or something because when I just replaced the end link, the bottom bolt doesn't sit flush. Do y'all think that means i need a new sway bar?
Not necessarily, when you have the front end jacked up off the ground the suspension is extended the it's maximum point so you'd have to probably jack the end up that you are working on to compress the suspension or use a pry bar and ull the sway bar into place while trying to put the sway link on.
Thanks for the video, thanks for how you explained everything.... one of the best videos that I ever seen.. really professional..
Thanks for the video. Ordered the struts for my Prius thinking that was the issue but saw how bad the boots were on the stabilizer links. So I replaced the stabilizer bars instead and that was my issue. Both sides were shot! Appreciate it.
So glad that it took care of the issue🙂👍 definitely saves u some money and work
Great video!! Unfortunately I m stock with a stubborn bolt
Another good video, I’m going down to work on this now, thanks!!
Thank you🙂 thats great👍 hopefully everything goes smoothly
@@backyardchevy328 took 1.5 hours to complete.
@@martymckay297 thats great! Great job🙂👍
Is it necessary to replae the sway bar itself or just the links?
Superb explanation 👌
Thank you your tutorial. UTS very help full
Hi can you please suggest me which brand link kit will be best for 2007 hyundai elantra
What size of socket to lose of sway bar link nut sir
Whenever I stop at / or take off from a stoplight I hear a clunking noise. I wonder if this is it ?
Could be..either that or a bad ball joint or control arm bushing..but yea this one in video would do the same with movements up and down
I am having the same sound
Could also be an exhaust that's broken at one of the welds or the rubbers gave in. If you could be any more specific that would be helpful. Is it in a specific spot you hear the noise at all.
Thanks, but in my case on my link kit only a hole for torx key at the end so can't use a wrench key during the torquing operation. Any solution?
Use the torx with a ratchet
Just tighten it with an impact wrench till the bolt breaks
Bro 😎 thanks I was loosing my mind 😂
😂😂bruh same
Wat Will we do without youtube
@@brayanchicas3695 😂 I knoooww I was loosing it while all I needed was the wrench and then the key lmao
Thanks for the video!
Hey question. Can I use two endlinks of different length. One of them is 1/2 inch longer than the other one. Will this affect anything?
Don't be daft. Use the specific parts for your vehicle.
实用的视频，感谢分享😊
Very good video
Great video, now change that lower control arm and strut ✌️✌️lol
Question fpr anyone that has experience/knowledge of working on car suspension systems: the end of my sway bar, where it connects to the end link, seems like its twisted or something because when I just replaced the end link, the bottom bolt doesn't sit flush. Do y'all think that means i need a new sway bar?
Not necessarily, when you have the front end jacked up off the ground the suspension is extended the it's maximum point so you'd have to probably jack the end up that you are working on to compress the suspension or use a pry bar and ull the sway bar into place while trying to put the sway link on.
thank you.
Thanks
You shouldn’t torque the end links until tires are on and car is on ground in order to pre load
Thank you! I believed you solved my issue 😁
Why preload on a metal part???
@@rayneedaebluz what was your issue
@dtruth could we replace the links with tires on the ground?
@@abishekkayasthano
iam hereee 🥰🥰
Thank you buddy🙂👍
Okay of problem is of sway bar link or other parts??
Mine is squeeking 😫
I changed the ball joint and now its fine, the mechanics wanted me to change bunch of parts 🤣
Genius
Dude, spray it first with WD40 Lol!
Thank you