4 stroke motorized bike

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ •

  • @motorizedbikeenthusiast6880
    @motorizedbikeenthusiast6880 2 роки тому +2

    Coolest motorized bike ive seen in a while. Keep it up!

  • @MrBri_Guy
    @MrBri_Guy Рік тому +1

    Wow thats a very nice bike, you did an amazing job on it, so clean!

  • @samuelyniguez3816
    @samuelyniguez3816 Рік тому +2

    Nice.... Red pin strips would look killer!

  • @kjer6071
    @kjer6071 3 роки тому +2

    Absolutely the Best Exhaust/Muffler routing of any!! That really turned out well for you.

    • @goose278
      @goose278  3 роки тому

      Thanks! Im really happy with it 8 months later.

  • @mikesbarn1858
    @mikesbarn1858 2 роки тому +3

    Very nice build. I built one on the blue Kent frame from wort mort. Top speed of 30. Starts first or second pull. Came with a bad spark plug. Alignment was perfect never used the tensioner. I mounted it out of the way on the bike just in case.

    • @goose278
      @goose278  2 роки тому

      Wow thanks, sounds like a good combo. I think it is just fun to build them, not expensive and you can do whatever you want 👍

  • @diontaporter4014
    @diontaporter4014 6 місяців тому +2

    That's awesome, considering a 2 stroke.

    • @ProtoType99468
      @ProtoType99468 4 місяці тому +1

      2 strokes are okay, had one and had to carry a couple of tools becos the vibration would loosen nuts & bolts . . . now i got a 4 stroke - gotta love that that pull start 🚴‍♀

  • @HanzelFonferek
    @HanzelFonferek 4 роки тому +2

    Nice job on the chain guard!

  • @magpie6648
    @magpie6648 8 місяців тому

    lovely job... great looking bike..

    • @goose278
      @goose278  8 місяців тому +1

      Thanks Magpie!

    • @magpie6648
      @magpie6648 8 місяців тому

      @@goose278 it's my aim to have a four stroke engine. I've had the wee 49cc two stroke chinese thing for 12 years now, it still runs okay on the flats😊😉 it's lost it's power for the hilly bits😆😂😂 I tried a longer pipe which increased the power, yet the tick over had to be stupidly high to prevent it from stalling when stopped in traffic😆😅😂 plus, the clangity clang of the two stroke gets a bit much after 20 minutes🤔🥴😜 great inspiration, thank you...

    • @goose278
      @goose278  8 місяців тому +1

      Yes, I like the belt transmission for these, beware of the chain type I would say .

  • @ranulfo102
    @ranulfo102 Рік тому +1

    FRIEND, CONGRATULATIONS ON THE VIDEO OF THIS FANTASTIC BIKE. WHERE DID YOU PURCHASE THIS MATERIAL THAT COVERS THE ENTIRE EXHAUST PIPE? WHAT'S HIS NAME ? WHAT MODEL IS THIS BIKE FRAME? WHERE DID YOU PURCHASE THIS CENTER SUPPORT? THIS TYPE OF PEDAL, THAT WHEN YOU STEP ON, IT LOCKS THE TIRE? WHERE DID YOU GET IT, IF POSSIBLE SEND THE LINKS, THANKS.

    • @goose278
      @goose278  Рік тому

      I can't right now but I will try to gather that up to you later

    • @goose278
      @goose278  Рік тому

      www.walmart.com/ip/Hyper-Bicycle-Men-s-26-In-Beach-Cruiser-Bike-Black/299035532?wmlspartner=wlpa&selectedSellerId=0&adid=22222222228299035532_143229610229_18632966377&wl0=&wl1=g&wl2=m&wl3=635960850395&wl4=pla-410348710453&wl5=9010850&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=online&wl12=299035532&veh=sem&gad_source=1&gclid=CjwKCAiA9dGqBhAqEiwAmRpTC2nq6-WUC30NMayuFXsK1jqh02VBUO_BaWJc8MFkR13exjRTdLIKNRoCKL8QAvD_BwE
      This is the bicycle
      www.ebay.com/itm/134611882384?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=9qrTFPrbSOK&sssrc=4429486&ssuid=V0x2VhWEQ5S&var=&widget_ver=artemis&media=COPYwww.ebay.com/itm/385660753281?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=war4_qjgrwc&sssrc=4429486&ssuid=V0x2VhWEQ5S&var=&widget_ver=artemis&media=COPY
      This is the center stand and wrap
      The pedals are a bit wider and they come with the motor kit.

    • @ranulfo102
      @ranulfo102 Рік тому

      OBRIGADO MEU AMIGO, PENA QUE FICA MUITO CARO IMPORTAR ESSA BIKE AQUI PARA O MEU PAÍS. AQUI A CORRUPÇÃO NÃO PERMITE QUE PESSOAS COMO EU POSSA IMPORTAR ALGO TÃO MARAVILHOSO. MAS DESDE JÁ AGRADEÇO SUA PRESTEZA.
      THANK YOU MY FRIEND, I'M SORRY IT'S VERY EXPENSIVE TO IMPORT THIS BIKE HERE TO MY COUNTRY. HERE CORRUPTION DOES NOT ALLOW PEOPLE LIKE ME TO IMPORT SOMETHING SO WONDERFUL. BUT THANK YOU IN NOW FOR YOUR PROMPTNESS.

  • @heavystarch100
    @heavystarch100 3 роки тому +1

    Nice clean build. Mine is similar. But about to finish a Predator build. I really like what you did with the forks.

    • @goose278
      @goose278  3 роки тому

      Thanks, it did really change the look. I hope we can see your project on here somewhere soon

  • @cubanassasinmma1648
    @cubanassasinmma1648 2 роки тому +6

    every time i see this bike with the gas tank on top of the frame wedge i just ask WHY, IT FITS INSIDE THE WEDGE AND IT LOOKS A MILLION TIMES CLEANER

    • @goose278
      @goose278  2 роки тому +2

      I agree, I tried it but the cap is in the center and gets in the way.

    • @cubanassasinmma1648
      @cubanassasinmma1648 2 роки тому +1

      @@goose278 its worth capping and welding on the side

    • @michaelbrinks8089
      @michaelbrinks8089 3 місяці тому

      ​@@goose278 Do you think those engines would handle a 15 mile (30 miles round trip) cruise at 30mph once a week into town for very long?

    • @goose278
      @goose278  3 місяці тому +1

      @michaelbrinks8089 I would think easily definitely no problem

  • @DJb-ill219
    @DJb-ill219 4 місяці тому +1

    Looks really cool nice customization and yeah 4 stroke is the way to go those 2 strokes break to much

  • @gerardjones7881
    @gerardjones7881 2 роки тому +1

    I switched to a heavier chain, 415H is a scooter chain, much beefier.
    Installed a different front wheel with a brake disk and welded the caliper to the fork, it really stops with authority now.
    they do require decent tools to install and theyre fiddly , need regular work but loads of fun on the snowmobile trails up here in Maine.

    • @goose278
      @goose278  2 роки тому

      Wow that's great! So far so good I haven't had any more chain problems at all. I put a disc on the back and I got a new hub for the front but haven't respoked it yet

  • @roroboi2
    @roroboi2 Рік тому +1

    Много добра изработка. Браво.

  • @johntollen9865
    @johntollen9865 Рік тому

    Very good job. I like it.

    • @goose278
      @goose278  Рік тому

      Thanks John it was fun! Haven't ridden it in several months though

    • @goose278
      @goose278  Рік тому

      Update.. you inspired me to bring it out. It has been sitting for months, it started in 2 pulls. I drained the carburetor out before putting it away.

  • @ChristopherJones16
    @ChristopherJones16 Рік тому

    Ive yet to build a motorized bicycle, but at 00:28 can you explain what this is and why it was included in the slide show? Is this sprocket assembly standard or was this custom? If custom, why did you go custom and not go the standard sprocket assembly route?

    • @goose278
      @goose278  Рік тому

      Hey Chris! That is a rag joint it's not a very good sprocket assembly but it comes with the kit. In another video I have it shows the better route to go, it clamps around the Hub and it's not as wacky as that. that is very hard to get set perfectly. The Hub mount is not that expensive and it's definitely the way to go

  • @Dmane95
    @Dmane95 4 роки тому

    Post more about this bike ! Awesome build

    • @goose278
      @goose278  4 роки тому +1

      Thanks! Yeah I kinda dropped off the face of the Earth here with this thing but there is good news , 🙂it runs great and I should put something else up soon!

  • @larryshaver3568
    @larryshaver3568 2 місяці тому

    what is powering the light?

  • @kennyh5083
    @kennyh5083 11 місяців тому +1

    Way cool Dude!

  • @jonny6758
    @jonny6758 2 роки тому

    Looks like belt drive you like the transmission and any issues with centrifugal clutch

    • @goose278
      @goose278  2 роки тому

      It's been Flawless other than coming loose once or twice so you need to check those once in awhile. But it works great haven't had any issues. I think it's a lot smoother than the chain drive transmission

  • @Darianplaysand
    @Darianplaysand Рік тому

    I noticed some kits on ebay dont show a crank spindle in the ebay product photos. I wanted to know if your kit came with a spindle or did u have already or purchase separately

    • @goose278
      @goose278  Рік тому

      This was a few years ago, but yes it came with the crank and sprocket. I was very impressed with what I got for the money.

    • @goose278
      @goose278  Рік тому +1

      Also it was a bit wider but I thought I would notice it but I really didn't.

  • @leroyjenkins5375
    @leroyjenkins5375 2 роки тому

    Where did you get the exhaust pipe?
    Looks dope, I want one!

    • @goose278
      @goose278  2 роки тому

      Thanks Leroy, at 8:00 on the video it shows what I did. It worked out really good.

  • @dalepress1581
    @dalepress1581 2 роки тому +2

    Any chance you could make me a fork suspension like you welded? I'd pay for it, of course?

    • @goose278
      @goose278  2 роки тому +2

      Hi Dale, that was just some scrap I had laying around. And I just don't have time to do any projects . sorry

  • @joedoe5738
    @joedoe5738 2 роки тому

    Beautiful,just like a real motorcycle!! blessings from Puerto Rico ☀️🏖️🇵🇷💦

  • @rogeralbarracin191
    @rogeralbarracin191 Рік тому

    Beautiful build you did an amazing job.
    How's it holding up?

    • @goose278
      @goose278  Рік тому +1

      Thanks Roger! It doesn't get used much but is still running good,I drain the carburetor when I park it.

  • @icuformiles420
    @icuformiles420 Рік тому

    Can you still petal like a normal bike if need be

    • @goose278
      @goose278  Рік тому +1

      Yes, but it has a little drag if the motor is not running because you're pulling another chain. I guess if the motor broke down you could pull the master link off of the chain and pedal your way home

    • @icuformiles420
      @icuformiles420 Рік тому

      @@goose278 thanks

  • @HanzelFonferek
    @HanzelFonferek 4 роки тому +1

    I subscribed to your channel man!

  • @Adalbertomatos_
    @Adalbertomatos_ 3 роки тому +1

    Look Nice good job

  • @HanzelFonferek
    @HanzelFonferek 4 роки тому

    Where did you get you headlight for your bike? I'm looking for one for mine.

    • @goose278
      @goose278  4 роки тому

      Just a cheap eBay motorcycle universal headlight with led's in it.

    • @HanzelFonferek
      @HanzelFonferek 4 роки тому +1

      @@goose278 thanks! And Merry Christmas!

  • @moiusa
    @moiusa 2 роки тому +1

    Yep! Never ending problems.. in a perfect world, perfect problems overflow...

  • @goose278
    @goose278  4 роки тому

    I am hoping the air movement of the bicycle will help componsate🤨 So far it seems to run very cool.

    • @dehoedisc7247
      @dehoedisc7247 4 роки тому +1

      If the bike is in motion, some cooling should take place, as it does with the uncooled 2 stroke engines, however on my 4 stroke engine I prefer the well engineered intact cooling system. The factory design cools the engine at all times, whether moving through the air, or not.

    • @goose278
      @goose278  4 роки тому

      It is a very well designed engine

  • @ronaleck9777
    @ronaleck9777 9 місяців тому +1

    Tottaly awesome

    • @goose278
      @goose278  9 місяців тому

      Thanks, I need to put out a new video.

  • @TowBoater1997
    @TowBoater1997 3 місяці тому +1

    I’d like to buy this if you still have it , I’d pay a pretty penny for it .

    • @goose278
      @goose278  3 місяці тому

      @@TowBoater1997 yeah I still have it haven't used it much. I'm in Dallas Georgia

  • @Ёжик-т2ж
    @Ёжик-т2ж 9 місяців тому

    Молодец зделал хорошо! Осталось некторые детали - бензобак всё портить, спусти под раму бензобак или другой делай и переди амортизации делай и будет смотреться классно! 😊👍

  • @dalepress1581
    @dalepress1581 2 роки тому

    Did your pedals clear the engine or did you add a wide crank set?

    • @goose278
      @goose278  2 роки тому

      Hey Dale, yes that kit came with a wide crankset but it's not too wide, hardly noticeable .

    • @dalepress1581
      @dalepress1581 2 роки тому

      @@goose278 Thanks. Did you have to buy a 3 piece conversion kit? If so, can you tell me where you git it?

    • @goose278
      @goose278  2 роки тому +1

      www.ebay.com/itm/New-Bicycle-Motorized-Engine-Motor-Kit-4-Stroke-53cc-Gas-Petrol-Engine-Full-Set-/392400876110?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
      E bay🙂

    • @goose278
      @goose278  Рік тому

      The kit came with a pedal set. They are a bit wider but not much

  • @nesdi6653
    @nesdi6653 3 роки тому

    Where did you buy the belt drive!

    • @goose278
      @goose278  3 роки тому

      I bought it off of E bay as a kit. In the description it should say if its chain or belt drive. I don't know about a conversion kit though.

  • @amealnet2495
    @amealnet2495 3 роки тому

    What type of battery powers lights?

    • @goose278
      @goose278  3 роки тому

      Im using an rc type lithium 12v rechargeable pack . Lasts long with led's.

  • @amealnet2495
    @amealnet2495 3 роки тому

    Is the exhaust pipe modification welded ?

    • @goose278
      @goose278  3 роки тому

      Yes in the video I showed it . I think its like 3 sections, made from the handlebar steel.

  • @motorizedbicyclenation53cu90

    What gauges are those

    • @goose278
      @goose278  Рік тому

      www.ebay.com/itm/174531899619?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=hxzu6dwjs_m&sssrc=2349624&ssuid=V0x2VhWEQ5S&var=&widget_ver=artemis&media=COPY
      Hey MBN53 , I got these on ebay but just for looks. Speedometer is off and I couldn't get the tach to work with the 4 stroke. So... maybe you can make them work 😏

  • @gewizz2
    @gewizz2 3 роки тому

    cant that big red cover be removed?

    • @goose278
      @goose278  3 роки тому +1

      Yeah,, I painted it black and it looks better. But Im keeping it as a cooling fan for now. It does look cool with a new flywheel and exposed magneto though.

    • @gewizz2
      @gewizz2 3 роки тому

      @@goose278 so it blows air over the fins to keep the engine at a stable temp?

    • @goose278
      @goose278  3 роки тому

      Yeah like a lawnmower

  • @Mac181
    @Mac181 2 роки тому

    Some one gotta create some kind quick release for chain links like if ya had to peddle it would be so much easier if ya could disconnect the motor chain

    • @goose278
      @goose278  2 роки тому

      So true, that would make a big difference.

    • @Mac181
      @Mac181 2 роки тому

      @@goose278 I had a moped and I had to peddle it it was so hard

    • @goose278
      @goose278  2 роки тому

      Almost easier to get off and push sometimes

  • @albertmichall5732
    @albertmichall5732 Рік тому +1

    nice
    thank you

  • @michaelblackwell7408
    @michaelblackwell7408 2 роки тому +1

    When I finish my bike I'm going on an interstate trip.

    • @goose278
      @goose278  2 роки тому

      I'd really like to hear how it goes! Should be quite a challenge.

  • @larryshaver3568
    @larryshaver3568 3 роки тому

    was that bike very expensive?

    • @goose278
      @goose278  3 роки тому

      I bought the bike used for $50. But it goes for around a hundred at Walmart. Then the motor kit was about $185 all in all not too bad

  • @HanzelFonferek
    @HanzelFonferek 4 роки тому

    Btw what do you get for top speed? Mine toped out at 27

    • @goose278
      @goose278  4 роки тому

      The original sprocket was about 26 or 27 miles an hour. But when I changed it to the 46 I think it is 43 I can't remember. It does about 35 miles an hour. But it doesn't climb hills as good.

    • @goose278
      @goose278  4 роки тому

      Just checked on E Bay . it was a 32 tooth sprocket

    • @HanzelFonferek
      @HanzelFonferek 4 роки тому +1

      @@goose278 thanks man!

  • @larryshaver3568
    @larryshaver3568 2 місяці тому

    you answered my question in the video

    • @goose278
      @goose278  2 місяці тому

      @@larryshaver3568 yeah Larry it stays charged for a long time and it is easy to charge back up

  • @dehoedisc7247
    @dehoedisc7247 4 роки тому +3

    This engine comes with a forced air cooling fan, and you have crippled the cooling system by removing part of the ducting, just like many people do, who do not understand how important cooling is.

    • @thakoalaking5022
      @thakoalaking5022 4 роки тому +2

      Yea these kits don’t come with a cooling system I have baught and assembled multiple engines this exact make and model they DO NOT come with a fan or anything like that it’s an air cooled 4 stroke

    • @Makats7
      @Makats7 3 роки тому +1

      @@thakoalaking5022 They most definitely do :) there are fins under the cover that hosts the rope-pull start, and the cover is molded to direct the air where it needs to go. Unlike the 2 stroke kits that only get air-cooled when in motion, the 4 stroke kits are being cooled even during idle

    • @thakoalaking5022
      @thakoalaking5022 3 роки тому

      @@Makats7 check my videos bud i build motorized bikes for fun the last one I had was a 4 stroke shwinn whizzer that was stolen from me the motor I purchased and built did NOT come with any cooling system whatsoever ever also on 4 motorized bicycle enthusiast pages and never seen them on a 4 stroke or 2 stroke it’s a nifty idea but not one I could see catching on with a motor that won’t warp enough from heat to cause ANY significant change unless your running a shit transmission but that’s on YOU

    • @thakoalaking5022
      @thakoalaking5022 3 роки тому

      @@Makats7 btw I have this EXACT kit so no

    • @thakoalaking5022
      @thakoalaking5022 3 роки тому

      @@Makats7 ua-cam.com/video/0qxQXeZSF9o/v-deo.html

  • @AUTISTICBLOGGER_steven
    @AUTISTICBLOGGER_steven Рік тому

    Another thing people should realize these are not mopeds if they were the pedals wouldn't be able to pedal t bike they would just be to start the motor and there wouldn't be a pull start

    • @Centar1964
      @Centar1964 Рік тому +1

      A MoPed is a bike with peddals and a motor, thus Mo Ped...how it starts has no bearing in the matter. I once had a TOMOS MoPed that started by peddaling backwards...

  • @pawpatina
    @pawpatina 2 роки тому

    5:15 OH QUESO!

  • @kurtislucien9052
    @kurtislucien9052 Рік тому

    They be jealous when you pull up

  • @ciliciaann3504
    @ciliciaann3504 11 місяців тому

    🚴‍♀💥💨💨💨😎👍

  • @HanzelFonferek
    @HanzelFonferek 4 роки тому

    They hardly give you anything to work with in the kits that you get

  • @joncurlee-hy6oi
    @joncurlee-hy6oi Рік тому

    Better than the 2 stroke.biult better an less mantince.

    • @goose278
      @goose278  Рік тому

      For sure, just idles nice and quiet..

  • @ВадимКузнецов-з2й
    @ВадимКузнецов-з2й 2 роки тому

    ... похоже, что выхлопная система переделана самостоятельно,да-же?🚴🚲😜🤭😁😉🤔🇷🇺👈!!!

  • @ВадимКузнецов-з2й
    @ВадимКузнецов-з2й 2 роки тому

    ...братишка!-, продай, а, я тебе за него денюжку дам,а?!!

  • @webcontentvideocom
    @webcontentvideocom 4 роки тому

    9:58 makes a big difference

    • @tomecalm7
      @tomecalm7 4 роки тому +2

      I used the rubber handle off of an old umbrella on the factory kickstand. Clamped it with the old coaster brake bracket. Much more stable. It doesn't even try to fall over and it doesn't look bad.