How to Replace Cabin Air Filter Toyota Venza
Вставка
- Опубліковано 15 вер 2024
- Purchase this filter at: filterheads.co...
AQ1102 filter fits:
Lexus CT200h 2011 - 2016
Lexus ES300h 2013 - 2016
Lexus ES350 2007 - 2016
Lexus GS300 2006
Lexus GS350 2007 - 2011
Lexus GS430 2006 - 2007
Lexus GS450h 2007 - 2011
Lexus GS460 2008 - 2011
Lexus GX460 2010 - 2016
Lexus HS250h 2010 - 2012
Lexus IS F 2008 - 2014
Lexus IS250 2006 - 2013
Lexus IS350 2006 - 2013
Lexus LFA 2012
Lexus LS460 2007 - 2014
Lexus LS600h 2008 - 2014
Lexus LX570 2008 - 2011
Lexus LX570 2013 - 2016
Lexus NX200t 2015 - 2016
Lexus RX350 2010 - 2016
Lexus RX450h 2010 - 2016
Pontiac Vibe 2009 - 2010
Scion iM 2016
Scion tC 2011 - 2016
Scion xB 2008 - 2015
Scion xD 2008 - 2014
Subaru Legacy 2010 - 2016
Subaru Outback 2010 - 2016
Toyota 4Runner 2010 - 2016
Toyota Avalon 2005 - 2016
Toyota Camry 2007 - 2016
Toyota Corolla 2009 - 2016
Toyota Highlander 2008 - 2016
Toyota Land Cruiser 2008 - 2011
Toyota Land Cruiser 2013 - 2016
Toyota Matrix 2009 - 2014
Toyota Prius 2010 - 2016
Toyota Prius C 2012 - 2016
Toyota Prius Plug-In 2015
Toyota RAV4 2006 - 2016
Toyota Sequoia 2008 - 2016
Toyota Sienna 2011 - 2016
Toyota Tundra 2007 - 2016
Toyota Venza 2009 - 2016
Toyota Yaris 2006 - 2016
The model shown in this video is a 2010 Toyota Venza but installation is similar on the other models.
Timestamps:
00:34 Filter location
00:59 Remove old filter
01:09 Install new filter
Purchase this filter at www.filterheads.com/AQ1102
Our arrows point down to indicate the direction the air is actually flowing. It should also be noted that the arrows on the OEM filter can be misleading if you intend to replace with an aftermarket filter. The OEM filter has "UP" arrows, whereas aftermarket filters show air flow arrows. If using an aftermarket filter, the airflow arrow should be pointing DOWN. This will make sense to you when you pull out the old filter and notice that all the debris (leaves, bugs, etc.) are on top of the filter. Therefore, the airflow travels downward, through the filter and into the blower vanes.
Wow, once past the add bit, this is a great step-by-step!
Thank you!
Thanks Sir 🤗👍.
Most welcome
Convenient!
So glad we could help!
Purchase your new filter at: www.filterheads.com/
I'm having the most trouble getting the arm back on at the end. It keeps snapping off of the inside.
When re attaching the arm. Tape the inside part to help it not detach. Then attach the part of the dampener arm on the side of the glovebox.
@@filterheads Is the bottom of the glovebox supposed to snap in or just rest on the bottom? I finally got it back in but it doesn't close smoothly. Thanks.
Can also extend the dampener arm out by hand before hooking it back on inside so it’s not such a tight squeeze