I was not very specific about that. I was asking about the device you were using to sand the blade. Thanks again for all the work that goes into making these videos
What kind of bits ......Tungsten steel bits ^^....or Accessoires do you use on that power tool to sand the surface before hand sanding? ...Sharpening Stone... Mold Air lapping Stone,,,^^
@@artisticson2275 thank you very mich for the link. But i fail to understand how you managed to fix it to the oscilating power tool. If you can give me a tip i would be very grateful. Thank you in advance
@@artisticson2275 Shouldn't be any problem, I've got three shipped from Japan. I'll have to pay tax and custom etc... Please, have a thought about it. My best regards. Michal.
beautiful blade, but It think you should have gone the Full Tang path, because the Santoku design is blade heavy to begin with and it needs more weight on the handle to increase balance. Also a full tang configuration is more robust and adds "life time" to the blade.
hello dear friend，I'm a big fan of yours and I really enjoy watch your videos, would you be interested in damascus chef knife and if so，can I send your the damascus chef knife？ can you do a video for me，that would be my pleasure, thanks!
Can’t stop watching your videos of amazing workmanship, craftsmanship.
Amazing as always,god job
That drill bit wandering like crazy on the spacer. Well done for keeping it all together
It's an antique desk drill.
I was not very specific about that. I was asking about the device you were using to sand the blade. Thanks again for all the work that goes into making these videos
Sharpening Stone... Mold Air lapping Stone,,,^^
Beautiful. Question. What do you have on the end of your rotary tool that you use to sand the blade?
It's an oilstone...Use it by attaching it as a superglue.
Congratulations. Excepcional job. Thanks for share.
Nice blade
Hi what is it that you wet or brush on before you use the heatgun? Thanks👍🏼
Greenland wax....^^
Nice as Always bro
Esa esmeriladora es muy buena , ya tiene muchos videos🖒
Absolutely beautiful.
Very beautiful.
Superb work. Subscribed.
Super bravo
Like the design of the blade, you make it look almost too easy to make. Where can your knives be purchased?
Hou much price
You want it?
Then can you give me an email?
artistic1@hanmail.net
The cute knife
Hello Sir,
Awsome job 👍.
What kind of bits or Accessoires do you use on that power tool to sand the surface before hand sanding? Thank you in advance.
What kind of bits ......Tungsten steel bits ^^....or Accessoires do you use on that power tool to sand the surface before hand sanding? ...Sharpening Stone... Mold Air lapping Stone,,,^^
@@artisticson2275 could you please post me a link to theese bits and lapping stones? I tried searching for it but did not find anything. Thank you
@@JuliusCaesar125 www.amazon.com/10-Piece-Drilling-Triangle-Tungsten-Tip-%EF%BC%88Black%EF%BC%89/dp/B088QFK6H6/ref=sr_1_13?dchild=1&keywords=tungsten+drill+bits&qid=1603714997&sr=8-13
www.amazon.com/Atoplee-Silicone-Polishing-Oilstone-Grinding/dp/B0194Q8Y2Q/ref=sr_1_33?crid=17MT2NW83PYBU&dchild=1&keywords=oil%2Bstone&qid=1603715134&sprefix=oil%2Bstone%2Caps%2C412&sr=8-33&th=1
@@artisticson2275 thank you very mich for the link. But i fail to understand how you managed to fix it to the oscilating power tool. If you can give me a tip i would be very grateful. Thank you in advance
@@JuliusCaesar125 It's super-glue gel type.^^
Beautiful build as always What kind of sanding device is that?
Sharpening Stone... Mold Air lapping Stone,,,^^
Hello Sir, which wax do you use? I've never seen this technic before...🤷♂️🙈
Greenland wax...^^
hello how are you, I love the knife you made, is there a possibility to buy it? I live in Germany, thanks
Can you contact me via email?
artistic1@hanmail.net
Stunning!
How can we buy this
how much does it cost?
Un cuchillo asi, cuanto cuesta, cual es su valor?
Cierto que es hermoso
Love them to the pices...anything for sale, sir ?
I don't think it's possible to ship it overseas...If there's a problem with customs...^^
@@artisticson2275
Shouldn't be any problem, I've got three shipped from Japan. I'll have to pay tax and custom etc...
Please, have a thought about it.
My best regards.
Michal.
@@CureM32 Really? ...then I'll try...
Could you send me the details by email attached below?
artistic1@hanmail.net...
@@artisticson2275 will do ASAP.
Thank You !
As usual a work of art!
Can I get this knife???
where can I buy one and how much Thanks
Could you contact me by e-mail?
artistic1@hanmail.net
beautiful blade, but It think you should have gone the Full Tang path, because the Santoku design is blade heavy to begin with and it needs more weight on the handle to increase balance. Also a full tang configuration is more robust and adds "life time" to the blade.
I used a little weighty Ebony for the weight balance and made the handle a little longer...^^
Where did you get your bevel jig?
diy...
Super😃👍💪
格好よい大き目のナイフ。
和包丁の様な茎に目釘で止め、実用性も有りですね。
The Japanese knife is one of my favorite knives.
@@artisticson2275
Also, please upload a video of making a new knife.
@@sazareishiさざれ石 There's a lot... search for 'Artistic Son'...^^
@@artisticson2275
There were many videos.
I will watch it from now on.
Hmm, short tant for such a big blade, nice though
hello dear friend，I'm a big fan of yours and I really enjoy watch your videos, would you be interested in damascus chef knife and if so，can I send your the damascus chef knife？ can you do a video for me，that would be my pleasure, thanks!
Steel forging is difficult because it is not suitable for the situation in the workshop.Neighbors live close by...^^
Es hermoso, yo quiero uno :-P
How much
That knife is more like a bunka or kiritsuke, the tip is not from a santoku
👍
Đẹp❤❤❤👍🏻👍🏻👍🏻
👍👍👍❤👌
😊
knife making
عمر عبد العال دبوس