I capsized my TI alone in a fairly strong wind. The sail was unfurled with the amas out and tramps installed. I unclipped one side on both tramps and folded the amas in, I then released the mast from the bearing and let it dangle by the 2 ropes that were still cleated as the wind was blowing me into shallow rocky water. It was VERY simple to right, extend the amas and then furl the sail by hand with the weight of the mast in the water. With the mast furled, I placed it back in position and clipped the tramps back on. This method would be useful for a smaller person with less strength and/or leverage. it is also useful in the situation of capsizing in shallow or rocky water to save damage to the mast or sail.
Thanks again Michael! Hopbiecat USA has placed your earlier video in their FAQs section, in order to possibly save someone's life with your extremely helpful video. I have asked them to do the same with this one.
A couple days ago, as I was leaving the harbor, I forgot to fold out the amas before unfurling the sail, and I went over, just like at 3:30 in this video. I was quickly blown to a dock, and there wasn't room to right the boat using the technique in this video, so I climbed onto the dock and got it upright (not easy, as it was hard to get any leverage). I've got a jib too, and a bunch of other gear, so it was a bit complicated, but not too bad. IMHO, the key is to uncleat the sail. In any case, I plan to practice soon in open water...
Echoing the other people saying remove the mast to make it easier. You want to get these boats back over ASAP because they can take on water, I found that out when I capsized my revo 11 with sail. I did remove the mast but even in the couple minutes upside down, it took on enough water to need bailing before it was stable enough to pull the mast up, partly due to the weight of the sail I’m sure. Obviously the AI has a big buoyancy advantage, might not be as big a deal on those.
I capsized my TI alone in a fairly strong wind. The sail was unfurled with the amas out and tramps installed. I unclipped one side on both tramps and folded the amas in, I then released the mast from the bearing and let it dangle by the 2 ropes that were still cleated as the wind was blowing me into shallow rocky water. It was VERY simple to right, extend the amas and then furl the sail by hand with the weight of the mast in the water. With the mast furled, I placed it back in position and clipped the tramps back on. This method would be useful for a smaller person with less strength and/or leverage. it is also useful in the situation of capsizing in shallow or rocky water to save damage to the mast or sail.
i used this method in rough seas and it works very well
Thanks very much for sharing! This is very helpful! I have never practiced capsizing my TI and I know I should!
Thanks again Michael! Hopbiecat USA has placed your earlier video in their FAQs section, in order to possibly save someone's life with your extremely helpful video. I have asked them to do the same with this one.
Appreciate the efforts guys. It seems that the righting line is important to reduce the skill and strength threshold for a successful recovery. Noted.
A couple days ago, as I was leaving the harbor, I forgot to fold out the amas before unfurling the sail, and I went over, just like at 3:30 in this video. I was quickly blown to a dock, and there wasn't room to right the boat using the technique in this video, so I climbed onto the dock and got it upright (not easy, as it was hard to get any leverage). I've got a jib too, and a bunch of other gear, so it was a bit complicated, but not too bad. IMHO, the key is to uncleat the sail. In any case, I plan to practice soon in open water...
Great righting videos. I never saw how easy or hard it was to climb onto the slippery overturned hull
Echoing the other people saying remove the mast to make it easier. You want to get these boats back over ASAP because they can take on water, I found that out when I capsized my revo 11 with sail. I did remove the mast but even in the couple minutes upside down, it took on enough water to need bailing before it was stable enough to pull the mast up, partly due to the weight of the sail I’m sure. Obviously the AI has a big buoyancy advantage, might not be as big a deal on those.
Seems to me in general righting would be easier with the mast out. Right, extend amas and reinstall mast.