Abandoned ‘93 Cummins. Will it run (AGAIN)?
Вставка
- Опубліковано 27 чер 2023
- Part 2 of the 1993 12 valve Cummins 1st gen diesel that had 0 compression on cylinder 6. We tear into it to see what happened and if it will live on.
To Support us in a more direct way, become a channel member and get cool perks!
/ @theetravisb
Send dad and me junk to our P.O. Box
P.O. Box 1772
Cortaro, Az
85652-1772
Business inquiries and if you have a car in the southwest you want dad and me to check out email us here
Travisblades1956@gmail.com
Interested in pre 1980 abandoned cars or trucks/ barn finds. (Not interested in foreign cars) and 1st and 2nd gen Cummins (89-98) diesels only - Авто та транспорт
Bro, I love you choice of headwear. Every one of your hats are nothing short of pimptacular.
😂😂 best comment
while you have engine apart, make sure to remove front cover and do the aftermarket fix on the dowel pin that sometimes drops into front gear cover. Very easy fix. Great work, Bill
Thank you for purchasing the engine stand.
I see so many guys working on cars and first starts. I don't have a car to work on myself. I'd like to travel around and do one with some of them. At 61 and nearly retired i have nothing to do.
Thx!!! love to see you and your Dad work on them trucks!!!!
I’d really like to see a video from a 727-518 swap. I know I’m probably the only one but I’d watch it 👍🏻
Cool truck, thank you for your APPRECIATION to your subscribers Travis
Thanks for putting it out there for us.
Really enjoying the 1st gen videos. Your not afraid of not knowing how to do something. You figure it out. I would deff be interested in seeing some AC or AC conversion videos from you. There's not much of those out there and you always have a good way of hitting the important things. Great work. Keep it up bud.
Awesome video! Learning a lot about Cummins diesel, I don't know much about them but love the look of the first gen Cummins
Jackstand will be useful again and again and again
The work you do is astounding, very cool to see the amount of time and work you put into these rides that otherwise would be scrap right now.
Thank you 🙏
Great video as always. Keep them coming. Greetings from Florida.
Thanks for the entertainment 😊
Thank you for watching!
Crazy. These trucks you and your pops find. Amazing to see you bring them back to life. Glad to see a new video on this project. I think it's got a 🕳in it or really bad burnt. Long way to go. It is coming along. Can't wait to see more videos soon. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making. God Bless.
My son found a 12 valve p pump at our local pull a part. So I ran down there and pulled it. I paid $300 dollars for it. It’s currently on the same stand that you bought for this video!
Travis has a "Fleetwood Mac" moment @7:18
Absolutely awesome episode 👍
Thank you 🙏
great video, good content, those cummins engines are loved by many motor heads 😎
You do great work and are very informative.
So another great video.
Thank you!
Road hard put up in a mess. It’s cool to watch the tear down. Great video
Thanks from. Sc.
Excellent video keep up first gen videos
Well! Great purchase! Keep up the good content!
As usual very interesting and smart video !
Thank you !
Hi travis thanks for taking one for the team on the stand . Cheers mate🇦🇺
Cheers 🍻 thanks for watching from across the pond
Commenting because of the major life investment 👍
😎😎
Great info in this video, really enjoyed it.
Thank you dale 👍🏻
Just amazing content!! Incredible editing! I subscribed. Thanks for all your efforts
Been following you for a while on the tiktok there. I'm glad I finally got over to your UA-cam! You have Great skills Man
Awesome video! It’s a shame that cylinder 6 failed but that’d be a good project for someone to rebuild and learn about proper engine work. Also enjoyed seeing the overdrive adaptation. Great work guys!
Enjoyed the picture show.
I recall doing doing an overdrive bypass on an old Transam I had that needed overdrive. Seems like I used an oiled pressure switch ran to ground. Screwed that into the 4 pressure band screw on the side of the trans. Worked good. Too bad UA-cam didn’t exist back when I did work on cars. I think I would have liked doing vids on that. Perhaps, it’s not too late, lol. I still know my way around an engine bay. Thanks for the vid. It was good!
Beautiful engine stand.
Another great video, I'm glad to see your numbers keep heading up I knew when you did the old International that people would love it and it would be popular.
Great job
Thanks!
good job travis
Bird looks like a baby flycatcher. I get them building a nest on whatever you hang up. Top of your rake, shovel or where ever. Great bug catchers to have around.
That’s a sweet truck! Great work man! Your 89-90 reminds me allot of my old 90 should have never sold it. Most reliable truck ever
All your videos I have watched deserve likes
Great video. Love to see the Westinghouse’s out there. I have the same set (electric and gas dryer). You and your Dad make a good team
Oh wow that’s cool do you actually use yours
In storage for now. Need to get the timer fixed on the washer (timer motor)
Glad you didn't change the channel name mate.
Cool thanks 😊😊😊
Well done.
Good.job😄👍👍👏👏👏Nice truck 😍
Thank you for sharing. God Bless 🙏
Love learning about diesels from you, im a complete noob but hope to one day be on your level! Much respect
Thank you I’m learning to
Okay, here's my comment for your engine stand, 😂
Thank you 💪🏼
hope that truck comes out good
Thanks
Oh boy back at er again
I have salvaged old commercial kitchens for scrap, and the accumulated grease behind and beneath the visible surfaces is just NASTY!! FAST ORANGE gets it off my hands.
new subscriber here , liking your vids bro! keep em coming!
Thank you means a lot
Good job - well done. That Cummins was nasty!
Yeah it was ferocious
You should always loosen head bolts with a breaker bar, and from out side to inside in an x pattern.
Mr. B. Here ! Easy Off Oven Cleaner might work ! LOL ! Make that a engine a parts engine , move on fine a drive train for truck if your going to keep . Best of luck !
Sad ting about the Cummings engine being absolutely trashed. Like you said, another future video.
Great job on figuring out that overdrive on your ol' truck.
Until next time ✌️
Thanks !
I got a 91 d350 single cab it's got over a million miles on it drive it everyday I got a 93 250 Cummins 176,000 Mi runs perfect
Nice beefy engine stand 👍🏽
Man that Cummins was nasty. Great job on the OD.
Thank you. !
Normally Bio-Diesel works fine in these old 5.9's. The former owner just didn't realize that you have to be on top of the fuel filter maintenance when using it.
Nice
Travis that engine stand had to be extra heavy duty. I can see where that’s a pretty good investment. Plus the rebuild on that engine will take quite a bit of time. So understand why your not going to jump on this.Your transmission problem solved. Outstanding! 💯👊👍
Yessir so much better now
Technically that engine stand is not heavy duty enough as the engine weight more than it’s rated capacity.
Cummins makes a repair sleeve so u don't have to bore out all the cylinders.
my dad has a 96 dodge with the overdrive transmission. works great except for the noisy overdrive.i am thinking of replacing the overdrive unit.
I’m commenting just cus he bought an engine stand 😂😂
Surprised that jack stand held the engine.
That little bird is a fledgling if I had to guess
I seen a tool that you add to a drill that hones the cylinder walls again which means that you could have just put it right back together and ran it
24:03 I thought you were about to start signing Lmfao
Trav, if ya wanna get that nasty cooking grease off the engine, put a small bottle of Dawn dish soap in the pressure washer! That cuts thru ANYTHING!
Another great video, I'm glad to see your numbers keep heading up I knew when you did the old International that people would love it and it would be popular. Just wanted to give you a word of encouragement and I always look forward to those videos so keep them coming. Semper Fi
Thanks for the compliment ! More to come.
That's what I did on my 89 took the 3-speed out and got a overdrive trans put it in there I did get my first speeding ticket with the 3-speed going 73 miles an hour😂
Cylinder 6 got a divorce. Said “it’s always up and down with you guys, I’m breakin outta here.” Great info about setting up that OD switch, cool test with the gauge. Shoutout to the shop bird
I have a shirt just like your dads from bench grinding. I am a mechanic at the local water department.
That is cool
If that engine could talk to that truck. It would be saying what happened to us. We used to be so beautiful
I'd kill for a stock 1st gen, they're clean, most 1st gens aren't like this would love a stock truck project that isn't ruined with aftermarket everything on it and a stupid color wrap or paint job
Love your videos man keep up the good work
Thank you
My 90 with a 727 and 3.07 did 80 mph easy! So I did the right thing and put a getrag 360 in her and now it dose 120!
I am now motivated to get an old dodge cummins
Let's rebuild that Cummins
Its only an engine different fuel is all the principle is the same, the compression is much higher on diesels as are torque settings, have fun
The definition of "Road hard and put a way wet".
Yes
How the hell could anyone be stupid enough to treat a valuable 5.9 this way?? They might as well have poured sand in it!
I think you should just hone number 6 cylinder the best you can , or if you have or can borrow a boring tool, bore out the cylinder and slap it back together. It was already running on 5 cyls. So it will smoke a little. New rings, hone job and put it in an old beater of some sort. It would make a great video. Don't give up so easy. I've seen way worse engines brought back to life on will it runs.
I'd say you could rebuild that engine and get some doors and a transmission for the donor truck, you could flip it. If i remember from the earlier video, the body is somewhat decent.
I'd hone out cylinder 6, clean out the rings and pop the piston back in and run it as is.
Hole in the piston!
Man, somebody really toasted that great engine with tons of abuse! You can't save all of these Travis, too expensive!
Agreed. To much money
Birdman bringing the hits...
I'd love to have one of these old Chevy's as a project car. I could mess with it and fix any issue owth just a hammer and maybe a prybar
I think there's a whole in the piston.
I think there is a French frie stuck in the injector for cylinder 6.
That’s a serious engine stand brotha! Did you like the 1st gen gasser dually I emailed you? I’d like to see more will it run & drive road trips. Keep up the great content.
I did take a look but I don’t think I can consummate it
Nice engine stand, not jack stand though ;)
I think blown headgasket and a gumed up pump veg oil doesn't get hotternuth to burn a hole in a piston
It’s coming up
Ok. You convinced me to subscribe. Live in Spain and here 90% of all vehicles are diesel. Just one question. What speeds are you getting after your transmission change? Are you able to open her up on the highway?
It may be to much Damage to get bored out.